Ayodhya Development Authority Tender

Brick work in foundation Brick work with common burnt clay( non modular) bricks of class 150 in foundation and plinth , cement  mortar 1:4 ( SOR 305b

Brick work super stracture 230mm ,Brick work with common burnt clay non modular bricks of class 150 in superstructure and above plinth level up to floor V in all shapes and sizes , cement mortar 1:4 ( SOR 2020305b+309+310

12 mm cement Plaster of mix 1:3 (1 cement , 4 coresand) SOR-2020-13.4.1

Providing and laying in position cement concreat of specified grde excluding the cost of centering and shuttering - All work up to plinth level in foundation (1: 1.5: 3) 1 cement : 1.5 coresand : 3 graded stone (SOR 2020-4.1.2)

Steel Structural Steel work in single section fixed with or without connecting plate including cutting costing fixing in position and applying a primary coat of approved Steel primer all complete. SOR 2020-10.1

R.C.C. works with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion 1:1.5:4 (1 cement:6 aggregate) inBeam of doors and windows excluding supply of reinforcement and its bending the same with 24 B WG binding wire andnecessary centering and shuttering etc, and also including supply of all materials labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-150. S.I. No/286b Beam

R.C.C. works with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion 1:1.5:4 (1 cement:6 aggregate) in Slab of doors and windows excluding supply of reinforcement and its bending the same with 24 B WG binding wire andnecessary centering and shuttering etc, and also including supply of all materials labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-150. S.I. No/284b Slab

R.C.C. works with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion 1:1.5:4 (1 cement:6 aggregate) in clumn of doors and windows excluding supply of reinforcement and its bending the same with 24 B WG binding wire andnecessary centering and shuttering etc, and also including supply of all materials labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-150. S.I. No/289

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). DSR 2018-9.1.1

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Size of tile 1000 x 1000 mm / 1000x600 mm or as per requirment) (DSR-2018- 11.41.4)

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (DSR-2018-16.86)

Providing and applying of black japan bitumin paint over DPC and wooden chauket in doors and windows complete with labour and material.

P/F at all height false ceiling including providing and fixing of frame made of special section power pressed from m.s. sheet and galvanised in accordance with zinc coating of grade 350 as per IS 277 and consisting of angle cleat 25x1.6mm with flanges of 22mm and 37mm at 1200mm c/c one flanged fix to the ceiling with dash fastener 12.5mm dia and and 40mm long with 6mm dia bolt to the angle hangers of 25x25x0.55 mm of required lengthened other end of angle hanger being fixed with nut and bolts to GI channel 45x15x0.90mm running at the rate of 1200 mm c/c to with the ceiling section 0.5mm thick button wedges of 80mm with tappered flanges of 26 mm each having clips of 10.5mm.at 450mmc/ c shall be fixed in direction perpendicular to GI channels with connecting clips made out of 2.64mm diax230mm long GI wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.50 mm thick 27mm high having flanges of 20mm and 30mm long ,perimeter of ceiling fixed to wall /partition with help of rawl plugs at 450mm c/c with 25 mm long drive all screws @230mm interval including jointing and fixing to a flush finish of tappered end sq edge of board with recommended filler jointing and tapper finisher and two coat of primer suitable for board as per manufacturers specification and also including the cost of making of opening for light fittings grills diffusers cut outs made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of engineer incharge but Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin- charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60.. DSR(12.45.4)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. DSR(18.8) 20 mm nominal outer dia Pipes DSR( 18.7. 2 )

25 mm nominal outer dia Pipes DSR(18.2.3)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work DSR(18.9) 50 mm nominal outer dia Pipes DSR(18.7. 2)

75 mm nominal outer dia Pipes DSR(18.9.8)

100 mm nominal outer dia Pipes DSR(18.9.9)

Providing & Fixing of WC Flush Valve Low Pressure Concealed Dual Flush (Concealed part for low pressure 0.8 bar flow pressure)

Providing & Fixing of Healt Fauset Make: Jaquar

Providing & Fixing of Two Way bib Tap Make: Jaguar

Providing and fixing of Angle valve 1/2" Make: Jaguar

Providing & Fixing of D-Code Counter Top wash Basin Make: Jaguar

Providing & Fixing of Towel Ring

Providing and Fixing of Looking Mirror (900x600 mm)

Providing and fixing of Down Pipe

Providing and fixing of Waste Cupling

Providing and fixing of Connection Pipe

Supply and fixing of Soap Dispenser, make: Jaquar

Supply and fixing of Soap Dish Holder, make: Jaquar

Supply and fixing of Pillar Cock, Make: Jaquar

Supply and fixing of washing sink of 2 bowl type for washing area.

One light point with 5 Amp. switch. Group C DSR-1.8.3-2018

Wall/Ceiling mounting fan point with 5 Amp. Modular switch.

Exhaust fan point with 5 Amp. Switch DSR -1.8.3-2018

One 5 pin 5 amp shuttered socket outlet with 5 amp switch. . DSR-1.32-2018

2x2.5 sqmm.+1x2.5 sqmm. earth wire (DSR -2018-1.7.2)

2x1.5 sqmm +1x1.5sqmm earth wire for additional light point. (DSR -2018-1.7.1)

Providing & fixing of LED strip light complete as per design, drawings, specification & as approved by E/I. (make: Havell's / Equivelant)

Providing & fixing of LED strip light Driver 40 W complete as per , drawings, specification. (Make: Light Berry / Philips / equivelant)

Supply and fixing of 12 to 18 watt LED down lighter with aluminium housing round / squire shape metal base, and spring support for fixing of light in ceiling, complete in all respect. (Make: Crompton / Philips / Equivalent)

Providing and laying of 2 pair 0.5 mm Dia telephone wire pvc insulated cable in the existing surface / pvc condute as required. DSR-1.18.2 -2018

Providing and laying of Co-axial TV Cable RG6 grade 0.7mm copper conductor PE insulated, shileded with fine tinned copper braid and protected with PVC sheath in existing surface / pvc condute , all complete with labour and material. DSR-2018 -1.19

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. DSR-2018-1.53.1

Supply and installation of regular/standard model ceiling fan of 1200 mm sweep including wiring the down rods of standard length (upto 30 cm) SOR-2018-.8.11.2

Supply of Fresh Air Fan 250 mm . (Make: Crompton / Havells)ADA

12way TPN DB (DSR 2.5.3) -2018

63 Amp Isolator (DSR 2.13.2) -2018

6-32 Amp MCB (DSR 2.10.1) -2018

Providing & applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR(13.80 - 2018)

Providing and applying of wall paiting with premium acrylic emulsion of interior grade , having VOC content less than 50gm / liter of approved brand and manufacture, including applying additional coats wherever required to achive even shade. (DSR 13.83.2) -2018

Providing and applying of primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) contant., with water thinable cement primer on wall surface having VOC content less than 50 gms per liter. (DSR: 13.85.3 - 2018)

Providing and making of wooden wardrobe, made from19mm thick waterproof , antitermite ply board, back side ply of 12mm thickness, and all inner side laminate will be offwhite, shutters will made from 19mm board, to be hang with auto hinges, fix with fevicol and nails, final surface to be finish with highgloss laminate, wardrobe will having provision for dressing also with looking mirror and seatty , drawer and shelves etc , tower bolt, magnet, wooden shelves, hanging rod, handle all complete with labour and material as per drwaing final.

Providing and making of LCD unit in Bedroom as per drawing final, made from 19 mm /18 mm thick waterproof MR ply board, panel will have open provision for Setup box and electrical switch / socket as per drawing final, all complete with labour and material.

Providing and placing of Single seater sofa chair made from teek wood , seat having cusion with fabric , chair will be polish with natural teek colour, all complete with labour and material.

Providing & fixing of 40mm thick flush door Both side Veneer / mica finish matching with groove complete with all fittings, Handle lock SS Finish with door closer etc, groove will polish with matching colour, all complete all complete as per drawing, specification and direction of engineer incharge. (ADA Approved)

Supply & Fixing of windows made from multi chambered UPVC profiles of minimum 60/108 mm thickness of (Wintech make or equivalent) in natural from stailized for heat, light, impact & UV radiation. The UPVC profiles should be reinforced with galzvanized steel profiles of designed thickness.Float glass of approved colour in 4/5/6/8 mm or as desired by the costumer shall be fixed with heveled beads. All openable / sliding sashes shall be having grey/black colored weather seal fitted in continuous lenghts made from bubble PTV Rubber & side Hung with 90L openin friction syats of rust proof stainless steel with provision of multipoint lockng system (casement only) made from Espag rods (coated steel) all handle shall be made from die Cast zinc alloy in white finish only as approved by the Architect/ Engineer -in-Charge (ADA Approved) & DSR

Providing and supplying of master bed in bedroom , made from kail / Teek wood frame , fully hydrolic, and back made from 19mm waterproof antitermite board with quilting type cusion, as per design final, with 8" thick mattress of Sleepwell with 2 nos pillow with pillow cover, and bed sheet, of bombay dying.

Providing and making of Modular Kitchen with wall side Cook top as shown in drawing, Bottom drawers and Carcase and storage rack shelves and Baskets and accessories, laminated shutters, overhead cabinet with glass shelves, and bottom boxes having kitchen accessories (Like: Bottle pullout, Cutlery Basket, Cup & Saucer Basket, Plate Basket , Thali Basket, Corner Rack Tray, detergent holder, wastbin etc) and storage for other big size boxes and coffee maker / Toaster etc, in kitchan also having provision of Microwave and Oven in wooden frame and glass visibility, all shutter and drawers having G profile type handle, with soft closing auto hinges and channels , all complete with labour and material , as per drawing and design final.(Board and Ply will be of Green / WPC / Century)

Providing and fising of Chimney and 4 burner gas cook stove ( Make: Kaff / Sun flame / Faber / Prestige / Bajaj etc).

Providing and installation of I-Let type designer curtain in Dining hall, Drawing room area and windows with SS finish rod and fittings, complete in all respect.

Providing and making of Crockery unit in dinning area as per drawing final, made from 19mm board of waterproof , having provision for shelves, and drawers , with soft closing hinges, and handle, shutters will have glass and wood frame, complete in all respect.

Supply and placing of Non hydrolic 6'X3' single bed with 4" thick mattress 1 nos pillow and pillow cover with bed sheet in staff room, complete in all respect.

Providing and making of frame base wooden almira made from 19mm thick ply board, and shutters will be of laminate finish and auto closing hinges , handle , locks all complete in all manners.