Ayodhya Development Authority Tender

S/F of "F" bracket with Nut Bolt for 11KV line pin insulator made of 50x6mm flate strip etc. complete in all respect.

S/F of M.S. channel 100x50mm 1.15mtr. Long or corse arm on pole with clamp, Nut Bolt etc. complete.

S/F of Angle for gaurding with 2 number eye bolt made of 65x65x6mm size angle iron with holes etc compelete in all respect.

Supply & erection of hexagonal/cradle type gaurd of G.I. wire No. 8 to 4 SWG including binding etc. complete in all respect.

S/Fof 6 inch dia GI pipe complete in all respect as per direction of E/I.

S/F of Double pole structure of SP-55 11Mtr. Long S.T. pole 11.00mtr. Long complete with all accassories including grouting & making plinth above 20cm G.L. in 1:3:6 C.C. with excavation and back filling etc. complete in all respect.

S/F of 11KV pin insulator with pin and nut etc. complete in all respect.

S/F of 11 KV disk & fitting (B&C Type 4500Kg) on cross arm on pole etc complete in all respect.

Supply & erection of overhead line with ACSR conductor on poles/service bracket including binding etc. complete in all respect.

Supply & erection of overhead line with G.I. wire No. 8 to 4 SWG on poles/service bracket including binding etc. complete in all respect.

S/F of 11 KV XLPE 3 core aluminum conductor cable below 1.5 mt. ground level and back filling complete with material labour T&Pcable make grandly/ polycab/Havels/Nicco as per E/I. (i)240 sq mm.

S/F of outdoor type cable end termination jointing kit suitable for XLPE cable etc all complete. (i) 240 sq mm.

S/Painting of pole with 2 coat of "Al" paint over one coat of red oxide including cleaning of dust vermin & making good complete in all respect. As per direction of E/I

S/F of danger board with clamp and bolt fabricated from 10gauge MS sheet etc compelete as per I.E rules F/F of number plate with clamp & bolt including numbering with paint etc complete as per E/I. rule.

S/L of HDPE (DWC) pipe for road crossing etc. (exept for cable support on pole) at a depth of 750mm below G.L. for L.T. calbe carriar as per direction of E/I. make Dura Line or Rack of following size . 90/76mm OD/ID

S/F of HDPE (DWC) pipe coupler for jointing of pipe of size 90/76mm OD/ID make Dura line or Reck etc complete in all respect. As per E/I.

Making suitable earthing of H.T./L.T. over head line pole with 2.5mlong 20 mmdia G.I. rod with 7/16 SWG G.I. wire as per UPPCL complete in all material, labour T&P required for proper completion of work.

s/f outdoor type LT Distribution bolt with rupturing capcity 5 KA at 415 or H called for induvitual item (cpri approved manufacturer ) openable infront and back suiatble for three phage , for wire 50 hz ac supply and an ambient temprature of 45 degree c. cubicile weather proof, dust proof, berming proof, protection shall be ip 55 as per is 2147 - 1962 and is 8623 the pannals ans suitches boards shall be fabrication out of 40 swg crca sheet steel and provided with 165 swg hinged door including suitable foundation main LT panel at substation 250 kva with plinth incomer 1 set of 400 ampr TP MCCB with sprader and external handle metering on incomer 1 set of digital ammeter with ass 1 set of disgital voltmeter with vss a set of LED Type phase indication light with contral mcb outgoing 6 set of 100 amp TP mccb spreader & extended handle (2No + 1 capicter pannel)

Plinth and foundation and fencing