Ayodhya Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Ayodhya Development Authority Tender
Civil And Construction
Building Construction
Eprocure
Opening Date22 Jun 2022
Closing Date8 Jul 2022
Tender Amount₹ 17,21,24,666
Costs
EMD
₹ 34,42,500Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_AFDA_709565_1Bid Award Id
ViewTender No
Panchkosi_marg_244 dated 18.6.2022Tender Authority
Ayodhya Development Authority ViewPurchaser Address
-Website
http://http://www.adaayodhya.in/Default.aspx
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8km from the site of work and including watering dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of the work.
143
-
620
... More
Providing and Injecting chemical emulsion for Pre-constructional Anti-termite treatment and creating a chemical barrier under and around the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimeter of building, expansion joints, surroundings of pipes and conduits, etc. complete (Plinth area of the building at ground floor only shall be measured as per I.S. 6313 (part II 1981) Aldrine emulsifiable concentracte or any other approved material such as Hepthachlor or chlordance will be used. the rate of applications of chemical emulsion shall be as follows:-
(1) treatment for masonary & foundation 5litres per sqm.
(2) back fill in immediate contract with foundation 7.5 litres per sqm.
(3) Treatment of top surface of plinth filling 5 litres per sqm.
(4)Treatment of soil along External Perimeter of building 7.50 litres per sqm.
(5) Treatment of soil under Apron along exernal perimeter 5 litres per sqm.
(6) Treatment of soil under apron along external perimeter 5 liters per sqm.
1870
-
135
... More
SUB HEAD 2.00 : CONCRETE & R.C.C.WORK
-
-
-
... More
Cement Concrete with 4 cm gauge approved stone ballast, approve coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
236
-
6340
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
917
-
533
... More
RCC below plinth
-
-
-
... More
Providing and laying cement conceret 1:2:4 (1 ce,ment: 2 coarse sand: 4 graded stone ballast 20mm nominal size) incl. supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete also including cost of formwork in foundation and floors
334
-
7800
... More
RCC work with cement approved coarse sand and 2cm guage approved stone ballast in the proportion of 1;2:4 in lintels of doors and windows excluding supply of reinforcement and its bending but incl. its fixing and bending the same with 24 BWg GI binding wire and including necessary centering and shuttering etc. and also incl. supply of all materials, labour and T&P etc. required for proper completion of the work. binding wire cost being included in the item.
178.79
-
8125
... More
As in item no. 283 above, but for slabs.
615.4
-
8300
... More
As in item no. 283 above, but in lighter beams i.e. having spans upto 6.0m.
127.31
-
8700
... More
Mild Steel or iron in plain work such as in reinforced concreted of reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work. And including supply of steel its wastage. and overlapping and hookes..
167112
-
71
... More
SUB HEAD 3.00 : MASONARY WORK
-
-
-
... More
First class brick work in 1:6 in cement and fine sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants, etc. required for proper completion of work.
-
-
-
... More
As in item 303 above but in 1:4 cement and coarse sand mortar.
1247
-
5160
... More
As in item 303 above but in 1:4 cement and coarse sand mortar.
92
-
5160
... More
Same as above item no. 309 above but for one brick wall add for extra labour.
796
-
311
... More
As in item 309 above but walls of half brick 115mm (4-1/2") thick add for extra labour over item no. 310
92
-
130
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
791
-
70
... More
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
1222
-
45
... More
SUB HEAD 4.00 : WOOD AND PVC WORK
-
-
-
... More
Supply and fixing of 4.5cm (1-3/4") thick C.P. teak wood part panelled and part glazed door and window shutters including supply and fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles, spring and / or other fittings but excluding their supply and including painting with two coats of black japan on all iron fittings if necessary & including fixing the glass panes with putty and bard. glass to be 0.64kg (21oz) fittings with necessary screws.
-
-
-
... More
Additional cost of fixing glass panes with C.P. teak wood beading and felt as desired by the Engineer-in-charge instead of with putty and brads including cost of all material T&P etc. required for proper completion of the work.
76
-
235
... More
As item no. 409 above but fully glazed.
76
-
4125
... More
Supply & fixing of flush doors commercial quality conforming to IS 2202 Part-1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs and other fittings but excluding their supply and including painting with twoo coats of black japan paint on iron fitting if necessary. with necessary screw complete
-
-
-
... More
Single leaf 35mm
158
-
1850
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
1700
-
156
... More
Supply of Fitting and Fittings
-
-
-
... More
Oxidised iron tower bolt with 9mm dia rod & screw 100mm long
100
-
19.5
... More
Oxidised iron tower bolt with 9mm dia rod & screw 200mm long
100
-
27
... More
ISI marked iron hinges 100mm long
300
-
15.42
... More
SUB HEAD 5.00 : STEEL WORK
-
-
-
... More
Mild steel or iron work of small size and sections such as holding down bolts, hold fast tie rods, grating etc. (when not included in an overall rates) wrought to required form including supply of steel and its wastage including cost of bolts, nuts, if required and welding, grinding and making holes as required for proper completion of work.
4240
-
76.8
... More
SUB HEAD 6.00 : STONE & FLOORING WORK
-
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement :4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Cost is inclusive of providing and laying Protection layer with 12mm thick cellotex board /12mm thick POP over polythene sheet.
-
-
-
... More
Granite of any colour and shade
-
-
-
... More
Area of slab upto 0.50 sqm in flooring (As approved colour of granite )
51
-
3661
... More
Area of slab above 0.50 sqm in flooring (As approved colour of granite )
190
-
3479
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
... More
Granite work
1176
-
327
... More
Extra for fixing marble/ granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
315
-
377
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
120
-
638
... More
Polished Granite Flooring:-
Providing and laying polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
... More
Polished granite stone slab of approved shade
305
-
3061
... More
Providing and laying rectified Glazed/Matt Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by approved make in colour) of 1st quality conforming to IS : 15622 of approved make in colours and shade laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments for 1 sqm.
1468
-
1110
... More
Supply and fixing 6mm (1/4") china white glazed tiles (in flooring or in skirting or Dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete including supply of all materials labour and T&P etc. required of proper completion of the work.
2594
-
1030
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :
1357
-
3175
... More
Red sand stone - Exposed face machine cut and table rubbed with rough backing - 30mm thick
-
-
-
... More
Interlocking tiles - Rubber moulded reflective zig-zag 60mm. Providing and laying of interlocking concrete block pavements having thickness 60mm as per drawing and technical specifications clause 1504.
1682
-
700
... More
Interlocking tiles - Rubber moulded reflective zig-zag 80mm. Providing and laying of interlocking concrete block pavements having thickness 60mm as per drawing and technical specifications clause 1504.
3540
-
915
... More
SUB HEAD 7.00 : WATER PROOFING
-
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
70
-
212
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including
cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/ brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge.
2461
-
1005
... More
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
(Note: It is suggested that this method should be adopted after ensuring the structural safety of the structures. As per direction oe E/I.)
-
-
-
... More
SUB HEAD 8.00 : FINISHING WORK
-
-
-
... More
12 mm thick plaster with cement mortar in proportion of 1:3 cement and sand of 1.25fineness modules over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work.
3428
-
175
... More
12 mm thick plaster with cement mortar consisting of 1 part cement and 3 part of approved coarse sand. minmum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work.
4269
-
185
... More
Add for extra labour to all items of plaster if done in ceiling.
1987
-
19
... More
2cm (3/4") thick cement plaster in dedo or skirting in 1:2 consisting of one part of cement and 2 part of approved coarse sand laid in panels, finished with 3.(1/8") floating coat of neat cement or cement and marble dust in ration of 5.1 including supply of all materials labour and T&P etc. required for proper completion of the work.
-
-
-
... More
Painting or varnishing on iron work in small areas, on new wood work with one coat of reay mixed priming paint and on coat of approved superior quality ready mixed paint of clear synthtic varnish including supply of all materials, labour and T & P etc. required for proper completion of the work. paint to be used should conform to the I.S.I no. 103-1950.
592
-
64
... More
Add one more coat - As in item (641) above but for every coat after first coat
592
-
30.5
... More
One priming coat of cement primer and one coat oil distemper on new work including supply of all materials labour and tools and plants etc. required for proper completion of the work.
3428
-
60
... More
As in item 649 above but for every coat after the first coat.
3428
-
23
... More
Finishing walls with water proofing cement paint of approved make and quality on new work with two coats to give an even shade, including supply of all materials, labour and T&P etc. required for proper completion of the works.
4269
-
58
... More
Same as in item 660 but for each coat of water proofing cement after the first two coats to given and even shade.
4269
-
22
... More
SUB HEAD 9.00 : WATER PROOFING
-
-
-
... More
Supplying and stacking at site.
-
-
-
... More
90 mm to 45 mm size stone aggregate
531
-
1682
... More
63 mm to 45 mm size stone aggregate
169
-
1410
... More
53 mm to 22.4 mm size stone aggregate
658
-
1595
... More
Stone screening 13.2 mm nominal size (Type A)
272
-
1619
... More
Moorum
272
-
771
... More
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
1358
-
752
... More
Interpretation Wall
-
-
-
... More
Research, design and execution of multiple forms of artworks on interpretative wall using CNC machines on 100 mm thick one side shot blasted sand stone as per approval with dry cladding with SS Cramp on SS Frame work of 304 grade anchored to existing RCC wall surface with baseplate and anchor fasteners as per requirement in curved profile all complete as approved by the Client. The design should illustrate in written words, pictorial images and patterns. Design will be depicted with the help of carving, embossing, engraving and inserting. The depth or the thickness of the letters/ Images /Pattern on the stone wall should range from 20mm thickness to 70mm from the base stone. At least 50% of the surface area of stone cladding will have decorative artwork (details as mentioned in the tender document). 50% area will have plain stone cladding of same material. All complete as per the approval of the Architect/ Engineer-in-charge.
200
-
159090
... More
Providing and Fixing Stone Bench - 3 seater incl foundation. As per approval of E-I-C.
45
-
20000
... More
Providing and Fixing SS make Dustbin (2bin) with stand incl foundation. As per approval of E-I-C.
90
-
10000
... More
Stone Plaque & Conservation
-
-
-
... More
Stone Plaque with Description in form of text and artwork using CNC machines on 100 mm thick one side shot blasted sand stone with dry cladding with SS Cramp on SS Frame work of 304 grade anchored to RCC wall surface with baseplate and anchor fasteners as per requirement in curved profile all complete as approved by the Client. The design should illustrate in written words, pictorial images and patterns. Design will be depicted with the help of carving, embossing, engraving and inserting. The depth or the thickness of the letters/ Images /Pattern on the stone wall should range from 20mm thickness to 70mm from the base stone. At least 50% of the surface area of stone cladding will have decorative artwork (details as mentioned in the tender document). 50% area will have plain stone cladding of same material.
210
-
159090
... More
Conservation of stone inscription incl. crack repair and structural strengthening using Steel‐rod stitching incracked stone patties, beam,and lintels. Providing and fixing stainless steel rods of 90cms length of which 15cm on either side and cold bending at 90degrees. The stainless steel clamps to be fixed perpendicular to the crack by drilling in stone and fixing with cement and aradite mixture in such a way that the entire length of the rod is in complete contact of the stone and the bent ends are fully inserted in the cracked stone. Use 316 grade stainless steel charge per hole.steel rod charges are counted per kg.Holes with 6mm, 8mm, 10mm or 12mm dia.as per requirement of position.
216
-
58182
... More
Wayfinders & Signages
-
-
-
... More
Supply and fixing of reflective sign board (single side) retro reflectice sheeting of HIP grade type-IV, the board shall be fixed on 50mm SS 304 grade pipe and reflective sheet on 4 mm thick, ACP sheet of standard make as per MORTH specification. The board shall be fixed using 2man post 45x45x60cm cement concrete foundation. The stainless steel joint welding of SS pipe work shall be band and grinder properly including buffng so an to give uniform shining at welded joints,. the retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. Size as per the site requirement and direction of E-I-C.
270
-
17167
... More
Supply and fixing of reflective sign board (double side) retro reflectice sheeting of HIP grade type-IV, the board shall be fixed on 50mm SS 304 grade pipe and reflective sheet on 4 mm thick, ACP sheet of standard make as per MORTH specification. The board shall be fixed using 2man post 45x45x60cm cement concrete foundation. The stainless steel joint welding of SS pipe work shall be band and grinder properly including buffng so an to give uniform shining at welded joints,. the retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. Size as per the site requirement and direction of E-I-C.
270
-
15414
... More
BILL OF QUANTITIES FOR HORTICULTURE WORKS
-
-
-
... More
LANDSCAPING WORKS (PLANTING)
-
-
-
... More
Clearing grass and removal of the rubbish up to a distance of 50m outside the periphery of the area cleared.
6000
-
6
... More
Trenching in ordinary soil up to a depth of cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/ and manure before and after flooding trench with water (excluding cost of imported earth, slude or manure).
1020
-
68
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).
85
-
193
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)
Holes 120 cm dia, and 120 cm deep
204
-
291
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)
Holes 60 cm dia , and 60 cm deep
136
-
38
... More
Supplying and stacking of cow dung manure/cattle manure at site including cost and carriage with all lead and lifts, (manure measured in stacks will be reduced by 8% of payment)
272
-
215
... More
Supplying and spreading of fertilizer & pesticides at site of work DAP
170
-
26
... More
Mixing earth and sludge or manure in proportion specified or directed.
272
-
32
... More
Spreading of sludge, dump manure or/ and good earth in required thickness (cost of sludge dump manure or/ and good earth to be paid separately)
850
-
45
... More
Rough dressing the trenched ground including breaking of clods.
5950
-
1
... More
Flooding the ground with water including making Kiaries and dismantelling the same
5950
-
2
... More
Fine dressing the ground
5950
-
3
... More
Grassing with selection no-1, grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately) With grass Turf
5950
-
12
... More
Removal of garden rubbish including building rubbish, earth with or / and mulba excavated by mechanial transport with all lead and lift.
170
-
1302
... More
Supplying of selection no-1 in turf form at site of work lush green, free from weeds with good and healthy i/c loading and un loading with all leads and lifts.
2720
-
69
... More
Preparation of mounds of various size and shape by available excavated /supplied earth in layers not exceeding 20 cm in depth, breaking clods,watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
1360
-
396
... More
TREE (Stem height to be considered for height) and Tree, Plants & Shurbs which are Favourable for Peacock
-
-
-
... More
Providing and stacking of Bottle palm of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags.
51
-
304
... More
Providing and stacking of Michelia champa (Golden Champa) of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge
68
-
78
... More
Providing and stacking of Tabernaemontana coronaria (Chandni single) of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge.
17
-
69
... More
Providing and stacking of Tabernaemontana divaricata (Chandni double) of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge.
17
-
78
... More
Providing and stacking of Washingtonia filifea palm stem ht. 90-105 cm with 6-7 healthy leaves lush green leaves well developed in big size HDPE Bags as per direction of the
officer-in-charge.
51
-
347
... More
Providing and stacking of Fishtail palm of ht. 270-300 cm bottom girth 40- 50 cm well developed in big size HDPE bags as per direction of the officer-in-charge.
34
-
477
... More
Providing and stacking of Azadirachta indica (Neem) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
17
-
56
... More
Shrubs plant
-
-
-
... More
Providing and stacking of Portulacaria afra (Jade) with 5 to 6 branches in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
34
-
26
... More
Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge..
34
-
17
... More
Providing and stacking of Juniperus prostrata with 5 to 6 latral branches and green foliage in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
34
-
26
... More
Providing and stacking of Syngonium (Butterfly) variegated with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.
34
-
26
... More
Providing and stacking of Tradescantia, full of leaves in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge.
34
-
18
... More
Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
34
-
17
... More
Providing and stacking of Iresine herbstii, of height 25-30 cm., full of branches well developed in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
34
-
17
... More
Plantation - Lot of Baboo with enahanced undergrowth Planting.
-
-
-
... More
Bamboo 18 to 20 cm girth and 90 cm height
68
-
28
... More
Providing and Displaying Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.
34
-
400
... More
BILL OF QUANTITIES FOR ELECTRICAL WORKS
-
-
-
... More
CHAPTER 1: WIRING
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group C
340
-
1053
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
20
-
917
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
... More
2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. earth wire.
200
-
181
... More
2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire.
250
-
181
... More
2 x 4 sq.mm. + 1 x 4 sq.mm. earth wire
100
-
228
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
3
-
28
... More
Supplying and fixing of brass batten / angle holder / connectors including connections etc. as required.
3
-
102
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
25 mm
300
-
78
... More
32 mm
100
-
80
... More
40 mm
20
-
113
... More
Supplying and fixing following Modular base & cover plate on
existing modular metal boxes etc. as required.
-
-
-
... More
1 or 2 Module
20
-
99
... More
3 Module
2
-
111
... More
4 Module
20
-
120
... More
8 Module
20
-
170
... More
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required.
-
-
-
... More
5/6 amps switch
20
-
74
... More
15/16 amp switch
20
-
115
... More
3 pin 5/6 amp socket outlet
20
-
96
... More
6 pin 6/16 amp socket outlet
20
-
186
... More
CHAPTER 2: DISTRIBUTION BOARD
-
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 way (4 + 24), Double door
1
-
3994
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
... More
For 8 way, Double door TPN MCBDB
1
-
1075
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single Pole
19
-
173
... More
Double pole
1
-
483
... More
Four pole
1
-
1951
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB) having sensitivity up to 30milliampere in the existing MCB DB complete with connections, testing commissioning etc. as required.
-
-
-
... More
40 amps
1
-
1818
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
3
-
7
... More
Supplying and fixing DP sheet steel enclosure on surface/recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.
1
-
736
... More
Supplying and fixing TP sheet steel enclosure on surface/ recessed along with 16/25/32 A, 415 V “C” curve TP MCB complete with connections, testing and commissioning etc. as required.
1
-
995
... More
Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
1
-
1467
... More
CHAPTER 3: CABLES TRAYS & RACEWAYS
-
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm width x 50 mm depth x 1.6 mm thickness
200
-
520
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
2
-
1014
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Tee” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
2
-
1106
... More
CHAPTER 4: EARTHING & LIGHTNING PROTECTION
-
-
-
... More
Supply, installation, connections, testing & commissioning of 17.2 mm dia. rod of 3 meter length having copper bonding of 250 micron, along with 25 kg of maintenance free ground enhancing compound & shall comply as per IEEE 80:2000 Clause 14.5d with fused rod to tape clamp for interconnection of strip from earth pit to equipment.
40
-
9170
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
20
-
49
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
20
-
419
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
200
-
1062
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
30
-
876
... More
Providing and fixing of lightning conductor finial , made of 25mm dia 300mm long Copper tube, having single prong at top, with 85mm dia 6mm thick G.I. base plate including holes etc. complete as required.
20
-
389
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
20
-
89
... More
Supply, installation, testing and commissioning of 6 digit lightning strike counter complete as required.
20
-
9913
... More
Supply, installation, testing and commissioning of Down conductor holder for GI Flat (25X3 MM) of min distance between the wall to the conductor will be of 85 mm. The distance between each holder should be min of 1.5 mtr.
40
-
112
... More
Supply, installation, testing and commissioning of tape holder for GI Flat (25X3 MM) made of Gun Metal for horizontal installation. The distance between each holder should be min of 1.5 mtr.
40
-
112
... More
CHAPTER 5: EXTERNAL LIGHT
-
-
-
... More
Supply, Installation, Testing and Commissioning of 40W LED based Street light, housing made up of Pressure Die Cast Housing LM 6 Alloy/ Anti Dust Exposed Lens, sturdiness and embossed brand name/ logo name of manufacturer. The fixture should have a minimum system lumen output of 3600 lumens and maximum system wattage of 40 Watts.The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP65 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK =05.The fixture driver should have an operating voltage range of 140-270 V, surge protection of =4KV, PF 0.9 , THD20% and SDCM5. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to Philips CAT No. - BRP052 LED36 CW HP SLA FG S1
115
-
2889
... More
Supply, installation, testing and commissioning of 5 meter pole suitable for LED Post top 130mm bottom dia, 3mm sheet thickness having base plate dimensions of 200mmx200mx12mm. Complete with foundation bolts (EN8 grade) with nuts, washer including 2 Nos. template of 4mm thick as per requirement and single arm for street light. the Poles shall be designed to withstand the maximum wind speed as per IS 875. Area and weight of light fixtures to be considered to calculate maximum deflection of the pole and same shall meet requirement of BSEN 40-2-1& 3. The pole shaft shall be made of sheet steel confirming to IS 2062/ BS EN 10025 having minimum yield strength of. 350N/ sqmm and silicon content less than 0.06%. The pole shaft shall be continuously tapered with single longitudinal welding , there shall not be any circumferential welding . The welding of pole shaft shall be done by submerged arc welding process. The poles shall be galvanised as per BSEN ISO 1461 standard with average coating thickness of 70 microns. The manufacturing unit shall have inhouse pole testing facility for validation for structure design data. Pole junction should be covered with caller around the pole.
115
-
13237
... More
Supply, installation, testing and commissioning of IP 67 rated recessed in ground deep Linear Lighting Fixtures for garzing outdoor .
Application , 30W /m ,3000k .
Dimenssion : L/W/H = 1200/89.5/133mm or equivalent
100
-
48307
... More
Supply, installation, testing and commissioning of solar lighting in the street solar lights as required .
Application , 40/60W /m ,5000k . Or equivalent
10
-
44283
... More
CHAPTER 6: FEEDER PILLAR AND ISOLATOR
-
-
-
... More
Supplying, installation, testing and commissioning of following feeder pillars including Photo sensor/Lux sensor and timer with Astronomical time switch for automatic switching On & OFF of external lights at sun set, sun rise cloudy seasons or twilight (Auto ON, Auto OFF, Auto modes) with timer facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge.
-
-
-
... More
FEEDER PILLAR
Incomer :
1 x R,Y,B LED indication lamp with 2A control MCB
1 x 160A, 4P, 25kA for 1 sec rated thermal magnetic based MCCB 1 x ( 0-160A, 0-500V, multifunction meter with inbuilt selector switch & 3 x 160/5A, CL-1, 15VA, Ring type CTs)
Photo sensor/Lux sensor and timer with Astronomical time switch
1 x 160A, 4P Contactor
Busbar :
200A, 415V, FP, 10 kA/ec, Aluminium busbar.
Outgoings :
6x 100 A, 4P, 25kA for 1 sec rated thermal magnetic based MCCB 4 x 63A, FP, MCB, 10kA "B type".
8
-
208302
... More
CHAPTER 8: LT CABLES
-
-
-
... More
Supplying following 1.1kV grade, heavy duty XLPE insulated, FRLS type armoured /Unarmured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation, galvanised steel armouring (round or flat as mentioned) and with all components as mentioned in BOQ, specifications and schedule, complete as required.
-
-
-
... More
3.5C X 95 sqmm alluminium conductor, 2XWY
800
-
554
... More
4C X 16 sqmm copper conductor, 2XWY
1500
-
404
... More
4C X 10 sqmm copper conductor, 2XWY
800
-
279
... More
3C X 4 sqmm copper conductor, 2XWY
600
-
160
... More
Supplying following 1.1kV grade, XLPE insulated, FRLS type control cables,suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation and with all components as mentioned in BOQ, specifications and schedule, complete as required.
-
-
-
... More
2C X 2.5 sqmm copper conductor
100
-
47
... More
4C X 2.5 sqmm copper conductor
50
-
77
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
... More
3½ X 95 sq. mm (45 mm)
40
-
411
... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
... More
3.5C X 95 sqmm alluminium conductor, 2XWY
40
-
380
... More
4C X 16 sqmm copper conductor, 2XWY (25mm)
260
-
247
... More
4C X 10 sqmm copper conductor, 2XWY (25mm)
40
-
220
... More
4C X 6 sqmm copper conductor, 2XWY (19mm)
-
-
-
... More
3C X 6 sqmm copper conductor, 2XY (19mm)
40
-
178
... More
1C X 16 sqmm copper conductor, 2XY (19mm)
-
-
-
... More
3C X 4 sqmm copper conductor ,2XWY (19mm)
-
-
-
... More
4C X 2.5 sqmm copper conductor (19mm)
-
-
-
... More
CHAPTER 9: FIXTURES & FANS
-
-
-
... More
Supply, Installation, Testing and Commissioning of surface/wall LED batten 20W made of extrusion aluminum housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =95lumens/watt with Minimum system Lumens 2000, Life of fixture (Including Driver) : 30000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM=5) , CRI 80, PF 0.95, Min working temp range - 0°C Ta 45°C, an operating Voltage Range of 140 - 277 VAC.luminair manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips BN021C LED20S PSU CW GR S2
140
-
1319
... More
Supply, Installation, Testing and Commissioning of surface LED batten of 7 W made of extrusion aluminum housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt with Minimum system Lumens 1000, Life of fixture (Including Driver) : 30000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM=5) , CRI 80, PF 0.95, Min working temp range - 0°C Ta 45°C, an operating Voltage Range of 140 - 277 VAC.luminair manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips BN021C LED20S PSU CW GR S2
120
-
879
... More
Supply, Installation, Testing and Commissioning of Surface mounted 12W LED Downlighter made of polycarobate housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt with Minimum system Lumens 1200, Life of fixture (Including Driver) : 30000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM5), CRI 80, PF 0.95, Min working temp range - 0°C Ta 45°C, an operating Voltage Range of 140 - 277 VAC.Minimum Internal Surge Protection 2.0KV & luminair manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips SM251C LED12S- 6500 PSU WH
80
-
1270
... More
CHAPTER 10: CIVIL WORKS
-
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
... More
100 mm dia (OD-120 mm & ID-103 mm nominal)
800
-
199
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
... More
300 mm dia
200
-
741
... More
CHAPTER 11: WIFI and CCTV SYSTEM
-
-
-
... More
IP 5 MP MFZ Varifocal Bullet camera:
Supply, installation, testing & commissioning of 1/2.7" 5MP (2592×1944) progressive scan imager,2.8 – 12 mm MFZ lens,Min. Illumination 0.008 Lux @ F1.2, AGC ON; 0.01 Lux @ F1.6, AGC ON; 0 lux with IR,Resolution 5MP(2592×1944), 4MP(2560×1440), 3MP(2304×1296), 1080P(1920×1080),720P (1280×720), D1, CIF, 480×240 ,Max. Frame Rate 30fps @ all resolution, 60fps @ 1080P,TWDR -120db ,Low light performance (0.035 lux in color mode),70 m IR distance, Audio Communication Bi-directional audio (2-way) ,Image Features Defog, BLC, HLC, 2D/3D DNR,Alarm IN x 1, Alarm OUT x 1,Intelligent Video Analytics-Line crossing, regionEntering/Exiting/Intrusion (human,motor vehicle/ non-motorvehicle classification),Line crossing human/ motor vehicle/non-motor vehicle counting, Scene change, video blur and video color cast detection,Face detection and face capture , ONVIF Profile (S, G & T),Image Features Defog, BLC, HLC, 2D/3D DNR,Corridor Pattern,Emissions- FCC Part 15.107 Class A, FCC Part 15.109 Class A , EN 55032, EN 55035 (IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8) .Immunity EN 55030-4.Safety UL 62368-1, IEC 62368-1 EN 62368-1, CAN/CSA C22.2 No. 62368-1-14, J62368-1, AS/NZA 62368.1.Environment -RoHS (IEC 62321-3-1, IEC 62321-5, IEC 62321-4, IEC 62321-6, IEC 62321-7, IEC 62321-7-2,IEC 62321-8), WEEE, REACH, NDAA Compliant
40
-
20697
... More
Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light 2MP, 30X IP IR PTZ Camera, 1/2.8" CMOS, 2MP (1920 x 1080) @ 60FPS, H.265, H.264, , 120dB True WDR,90dB TrueWDR HLC, BLC, triple stream, Lens wide 4 to 5mm - Tele 120 to 150mm, 30X motorized focus & zoom lens, Inbuilt/Externla IR uo to 150 Meters, Built in Video Analytics such as Video Motion Detection, 3DNR, TLS & EAP-TLS, Stream encryption, SSH / Telnet closed,Privacy Zones 8 ,Shutter Speed (Auto) 1/30(25) - 1/30,000 sec, Pan Speed: 0.1°/s ~ 240°/s PAN Range 360° Endless, Tilt Speed: 0.1° ~ 160°/s , IR PTZ: +15° ~ -90°, Presets 96, Dual channel Audio G.711/G726, SDXC up to 512GB, Alarm Input/Output 2/2, High-PoE (UPOE) and 24VAC, IP 66, IK 10 vandal proof, Inbuilt Heater, Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S compliant, UL, CE, EN, FCC, NDAA Section 889 & RoHS compliant etc complete as reqd. WEEE
1
-
93136
... More
Supply, installation, testing and commissioning of 4 U Rack mount single chassis Network Video Recorder with dual Gb NIC, , max 2 simultaneous monitors, RS-232/485 serial port,NVR should support up to connect min 128cameras per appliances , It must continuously record up to 800 Mbps (Windows) 1200 Mbps (Linux)of video for high concentration of high definition IP cameras Local client display rate: Windows OS: up to 700 frames per second Linux OS: up to 900 frames per second It should support streaming live/recorded video up to 500 simultaneous PC clients, NVR should Two way audio feature Processor: Gen 4 Intel® Xeon E3 ,It must work on Windows,Linux platform with 2x1 Gbps NIC and 16 GB of RAM and 8 USB slot (It should be configured as per the storage calculation provided by VMS OEM) ,It must support DVI-I, HDMI, 1 display ports, max 2 simultaneous monitors ,NVR should support Maximum 20 HDD with 12 HDD per slot and It should support minimum 240 TB of storage with RAID 6 . Windows, operating system shall boot and run on a solid-state drive (SSD) to ensure high performance and reliability RAID one is also on Operating system. NVR shall have 2 Gigabit 1000Base-T RJ-45 NIC card NVR shall have RS-485 serial port capabilities to communicate with serial devices Requirement is of critical nature and hence offered NVR must be of global standards and hence should be CE, FCC and UL certified. It should support 8/4 Alarm Inputs/Output NVR shall have Dual Hot Swap redundant Power Supplies Operating Temperature 40° - 95°F (4.5° - 35°C) Pre-loaded Operating System must be on windows platform, NVR should support N+1 feature as well.
1
-
517424
... More
Supply, Installation, Testing & Commissioning of The VMS software shall have an open architecture supporting IP cameras and encoders from multiple manufacturers, entry-level features to high-resolution, megapixel features, visual indication alerting operators of video loss, client software shall operate on all of the following operating systems: Windows, Linux, Mac OSX, run multiple client applications simultaneously on one workstation with multiple monitors. Up to 12 monitors shall be configured on a single workstation, retrieve video, audio and alarm data and provide it to the VMS clients, VMS software shall provide a purpose built mobile application capable of viewing multiple simultaneous live video streams and playing a recorded video stream (Android, iOS, Windows), VMS shall be able to use the Active Directory or LDAP features, VMS shall allow maps to be embedded inside of maps (i.e. hierarchical or nested maps). When an event happens on a map that is embedded inside of a map, VMS allows soft triggers to be placed, viewed and triggered from a map, VMS shall allow for the configuration local drives, direct attached storage drives and iSCSI drives, VMS standalone player shall package all of the exported video has not been tampered with using a keyed Hash Message Authentication Code (HMAC), VMS software shall be used to connect different types of events, such as input triggers and recognize the following event types: Video Motion, Video Loss, Input Trigger, Health, IP Camera Connection, Software Trigger and Analytics ,Client application shall be able to use OpenGL and Direct 3D to decompress and render video, Camera preview Style e.g Hovering, VMS has Video Push feature to another Client desktop simultaneously, Suspect Tracking : Configure camera links between cameras to follow a suspect between different camera scenes, Inactivity timeout : Save bandwidth with blacked out video panels after inactivity, VMS shall be supplied with minimum 100 nos of thick clients and 16 mobile clients, Data backfilling from primary server to failover over server in the primary server failure situation. The VMS should be NDAA Complied.
40
-
6726
... More
Supply, installation, testing and commissioning of 6TB HDD.
5
-
15522
... More
Supply, installation, testing & commissioning of Pole mounted Out-door 6U Network Rack with Hood and 2 FAN, cable manager, PDU 15amp - 6socket, Rack shall also be provided with recessed lockable GI Raof suitable size and flush door at the bottom with proper strengthening for the cutout of the door opening of junction box. Rack should be IP65 rated.
10
-
7657
... More
Supply, installation, testing and commissioning of 10G SFP module.
5
-
31046
... More
Supply, installation, testing & commissioning of 24 Port PoE+ Layer -2 Gigabit Ethernet 1RU chassis. 22 100/1000 Base-X SFP ports, 2 SFP/RJ45 combo, 2 SFP+ 10G ports, one expansion slot. Includes an internal AC power supply with a power cord.
3
-
93136
... More
Supply, installation, testing & commissioning of Patch Panel should be made of cold rolled steel.Should be conform to TIA / EIA 568-C.2 component compliant.All information outlets for 100Ω, 22-24 AWG copper.I/O should be supplied with cap or shutter to avoid dust.Patch panel should terminate 24 UTP CAT 6 (4 pair) Cables.Patch Panel should confirm to EIA/TIA 568A wiring pattern.Patch panel should be RoHS compliant.
5
-
4657
... More
Supply, installation, testing & commissioning of LIU should be of 1U size and 19” rack-mountable encloser.LIU should be complete with 9/125μm single mode pigtails.LIU should be complete with splicing tray and other standard accessories.LIU should be loaded with SC/LC-type adopter and couplers.LIU should be of ROHS compliant.
5
-
10348
... More
Supply and fixing of 5.0 Mtrs G.I. Pole for ptz camera (70 mm A/F (Top) x 130 mm A/F (Bottom) x 5 mm thick with base plate of 250 x 250 x 16 mm, 4 nos. 600 mm long M20 foundation bolts & hardwares (suitable reinforcements to be inserted in the foundation and 40mm x 2 nos. GI pipes for In/Out of main cables) Any other accessories etc. required complete in all respect as per direction of Engineer in charge. The pole shall also be provided with recessed lockable GI junction box of suitable size and flush door at the bottom with proper strengthening for the cutout of the door opening of junction box. The cost of RCC foundation shall be Included
18
-
26492
... More
Supply and fixing of CAT 6 Cable should be unshielded twisted pair cabling system, TIA / EIA 568-C.2 Category 6 Cabling system.Network support should be ultra high speed data networks such as Gigabit Ethernet (1000 Base-T and 1000 Base-TX) and beyond.Cable should be ETL Verified, UL Listed and UL channel verified- all three certificates are mandatory. Conductors type should be 23 AWG solid bare copper.Frequency tested should be up to 600 MHz minimum.Impedance should be 100 ± 15 Ohms.Propagation delay should be 535ns/100m @250MHz.cable should be RoHS compliant.
2000
-
42
... More
WIFI SYSTEM
-
-
-
... More
Supplying, installation, testing and commissioning of Wireless Indoor AP should be Dual band 802.11ac wave2 supporting the legacy 802.11b/g/n standards also in the 2.4 and in the 802.11a/n in 5 GHz with Dual bands concurrent operations, should support 4x4 MU-MIMO in 5Ghz to communicate 4 devices simultaneously.should support minimum 02nos of Gigabit ethernet port (10/100/1000Mbps) and one USB port for IOT,Location services , Should support More than 500 concurrent users , Should support Hotspot2.0 (Passpoint ) compliant , Support aggregate data rate more than 2.0 Gbps , Support Mac Authentication for upto 1000 Mac per SSID, NMS solution for Data and wireless to manage the complete network infra, including Poe Injector along with 3 years partner supprot.
5
-
62091
... More
Supplying, installation, testing and commissioning of WLC should support 100 access points from Day 1 and scalable for upto 4000 AP's without Software/hardware change. Proposed WLC should be On-Prem/cloud based, and should be hosted in India.Controller shall support minimum 200,000 or more concurrent users.WLC should provide Guest management system with Voucher based authentication, local SMS server integration for OTP, Google /Twitter /Office 365 /Facebook authentication. Same controller should manage & configure Wireless AP & Network Switch through single console.
5
-
465682
... More
CHAPTER : 12 VENTILATION & EXHAUST WORK
-
-
-
... More
Cabinet Fans :
-
-
-
... More
Supply, installation, testing and commissioning of factory fabricated Single Skinned cabinet type fans section made out of extruded aluminium section with 1.0mm pre-coated Galvanised steel sheet with DIDW blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply with motor and belt drive package. The fan Motor shall be of efficiency class IE2 whichever is more efficient. The cabinet as well as blower assembly shall be AMCA Certified and shall be selected for maximum efficiency.The fan shall be complete in all respect and should match the specification ,Drawings and Schedule.
-
-
-
... More
The motor & blower assembly shall be mounted on Aluminium extruded section/GSS. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum.
-
-
-
... More
2500 CFM, ESP 15 mm WG
1
-
65572
... More
AIR DISTRIBUTION SYSTEM
-
-
-
... More
GSS DUCT (Factory Fabricated Duct)
-
-
-
... More
Supply, fabrication, installation, testing and commissioning of G.S.S. sheet metal ducting for supply & return air with all the accessories and hanging arrangement.It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting.Refer tender specification for detail description
-
-
-
... More
24 G (0.63 mm)
30
-
954
... More
GSS DUCT (Site Fabricated Duct)
-
-
-
... More
Supply, fabrication, installation, testing and commissioning of G.S.S. sheet metal ducting for supply & return air with all the accessories and hanging arrangement.It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting.Refer tender specification for detail description
-
-
-
... More
22 G (0.63 mm)
4
-
1021
... More
Exhaust Air Grilles:
-
-
-
... More
Supplying , Installing, testing , balancing & fixing of powder coated extruded aluminium Exhaust/Fresh Air Grills of various sizes and as per specifications and approved drawings and schedules
2
-
5043
... More
Exhaust Air Louvers
-
-
-
... More
Supplying , Installing, testing and commissioning of powder coated extruded aluminium exhaust air louvers with min.60 % free area with Insect Screen, with metallic frame work & fixing accessories , to be fixed on external wall to exhaust air from inside area to ambient , it shall be suitable for exhausting required air. Louvers need to be suitable in order to avoid rain water entry in to the building @15 degree deflection with bird screen complete as per specification approved drawings and schedules.
1
-
6796
... More
DOUBLE LAYER CANVAS CONNECTION
-
-
-
... More
Supply,Installation,testing and commissioning of double Layer canvas connection fire retardant cloth for the end connection of Ductable Unit/Air Washer and Ventilation fan to reduce the vibration.It shall be fire rated for atleat 2 hrs.Refer tender specification for detail description
1
-
1490
... More
BILL OF QUANTITIES FOR PLUMBING WORKS
-
-
-
... More
SANITARY FIXTURES AND FITTINGS
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid.
30
-
6025
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 6 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required etc. complete in all respect as per direction of Engineering-in-charge.
-
-
-
... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
30
-
5018
... More
Providing and Fixing White vitreous china Under counter wash basin with C.I. brackets painted white, 15 mm CP Brass pillar cock, 32mm dia. C.P. waste, C.P chain and rubber plug, C.P. connecting pipe to wall and C.P wall flange and rubber adapter for waste connection complete including cutting and making good the walls wherever required etc. complete in all respect as per direction of Engineering-in-charge.
120
-
2945
... More
Providing and fixing white vitreous china infrared medium range manual urinal of approx. size 378 x 310 x 610 mm, havingwater inlet from back side, including fixing to wall with suitablebrackets all as per manufacturers specification and direction ofEngineer-in-charge.
50
-
3267
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
-
-
-
... More
Granite Stone of approved shade
50
-
3075
... More
Providing and Fixing 15 mm nominal bore CP Brass long body bib cock of approved quality conforming to IS Standards etc. complete in all respect as per direction of Engineering-in-charge.(In the bathroom for bathing purposes).
40
-
563
... More
Providing and fixing CP Brass Bottle Trap of approved quality & make etc. complete in all respect as per direction of Engineering-in-charge.
-
-
-
... More
32 mm dia
80
-
769
... More
40 mm dia
40
-
862
... More
Providing and fixing C.P. brass angle valve of approved quality conforming to IS:8931 etc. complete in all respect as per direction of Engineering-in-charge.
15mm nominal bore
150
-
434
... More
TOTAL SUB HEAD I
-
-
-
... More
SOIL, WASTE AND RAIN PIPES
-
-
-
... More
Providing and fixing soil, waste and vent pipes :
-
-
-
... More
100 mm dia
-
-
-
... More
Hubless centrifugally cast (spun) iron pipes epoxy
coated inside & outside IS:15905
650
-
921
... More
Providing and Fixing M.S. Holder bat clamp (factory manufactured) of approved design to sand cast iron / cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4 Nos, 6 mm diameter expansion hold fasteners including drilling necessary holes in brick wall /CC/RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mmx1.60 mm galvanized M.S. flats of specified shape and total length 420 mm and shall be fixed with M.S. nuts, bolts and washers of size 25x6 mm, one bolt on each side of the pipe.
-
-
-
... More
Total bracket length 580 mm of approved shape and design, (for single 100 mm dia pipe)
80
-
215
... More
Total bracket length 810 mm of approved shape and design, (for single 100 mm dia pipe)
80
-
266
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
... More
100 mm dia
-
-
-
... More
Hubless centrifugally cast (spun) iron epoxy
coated inside & outside as per IS:15905
40
-
478
... More
Providing and fixing plain bend of required degree.
-
-
-
... More
100 mm dia
-
-
-
... More
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
40
-
300
... More
Providing and fixing single equal plain junction of required degree :
-
-
-
... More
100x100x100 mm
-
-
-
... More
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
50
-
498
... More
Providing and fixing double equal plain junction of required degree.
-
-
-
... More
100x100x100x100 mm
-
-
-
... More
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
50
-
626
... More
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :
-
-
-
... More
100 mm
-
-
-
... More
Sand cast iron S&S as per IS - 3989
90
-
530
... More
Providing and Fixing 100 mm dia Terminal guard for Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
-
-
-
... More
100 mm
-
-
-
... More
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
120
-
347
... More
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe
-
-
-
... More
100 mm dia
-
-
-
... More
SS 304 grade coupling with EPDM rubber gasket
140
-
353
... More
Providing and fixing M.S. stays and clamps for sand cast iron hubless pipes of diameter:
-
-
-
... More
100mm
120
-
112
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
... More
100 mm inlet and 100 mm outlet
-
-
-
... More
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
80
-
660
... More
Providing and Fixing G.I. Reducing elbow (Floor drain) of 100 x 50 mm in cement concrete 1:2:4 at all levels for floor drains (excluding cost of grating) for connection to floor traps in sunken portions, complete as per drawings and as per approval of the engineer-in-charge.
30
-
937
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes including coupler conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.
-
-
-
... More
110 MM Diameter
170
-
265
... More
Providing and Fixing to the inlet mouth of rain water pipe SS 304 grating of following diameter complete in all respects as per direction of the engineer-in-charge
-
-
-
... More
a) For 100 mm dia
60
-
388
... More
Providing and Fixing G.I. "C" class pipe complete with G.I. Fittings and clamps, including cutting and making good the walls etc.(Internal work)
-
-
-
... More
a)32 mm dia
120
-
509
... More
b)40 mm dia
100
-
608
... More
c)50 mm dia
50
-
808
... More
Painting of G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality.
-
-
-
... More
a)32 mm dia
120
-
16
... More
b)40 mm dia
100
-
18
... More
c)50 mm dia
50
-
22
... More
Providing and fixing G.I. Inlet fittings with maximum 3 inlets 32,40 & 50 mm size fabricated from 100 mm dia G.I. pipes and welded G.I. sockets, fixed to C.I. Trap with joints and set in cement concrete(1:2:4) complete as directed by Engineer-in-charge.
80
-
1884
... More
Providing and Fixing SS 304 Grating with frame and SS Screws casted heavy 125 mm dia complete as directed by Engineer-in-charge.
110
-
521
... More
Providing and fixing cast brass cleanout plug / floor cleanout with suitable insert keys for opening, male threaded joint with G.I. socket caulked to spun soil pipe including cost of joint etc.complete as directed by Engineer-in-charge.
-
-
-
... More
100 mm dia
50
-
1407
... More
Making core cutting holes for C.I. Pipe of 100 mm dia. etc. in R.C.C. floors and roofs for passing C.I. pipe etc. and repairing the hole after insertion of C.I. pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
60
-
327
... More
Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge.
50
-
62
... More
WATER SUPPLY (INTERNAL AND EXTERNAL)
-
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - exposed on wall
-
-
-
... More
40 mm nominal bore
200
-
629
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
CONCEALED WORK, including cutting chases and making good the wall etc.
-
-
-
... More
15 mm nominal outer dia pipes
680
-
383
... More
20 mm nominal outer dia pipes
200
-
446
... More
25 mm nominal outer dia pipes
160
-
543
... More
32 mm nominal outer dia pipes
80
-
619
... More
40 mm nominal outer dia pipes
80
-
712
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
External works
-
-
-
... More
40 mm nominal bore
200
-
485
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
-
-
-
... More
32 mm dia
200
-
27
... More
Providing and filling sand of grading zone v or coarser grade all-round the G.I. Pipe in external work
-
-
-
... More
32 mm dia pipe
200
-
146
... More
Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finsh with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect.
-
-
-
... More
32 mm dia
20
-
781
... More
40 mm dia
60
-
1128
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
10
-
8769
... More
Providing and placing one tanks on terrace on (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
5000
-
8
... More
EXTERNAL DRAINAGE SYSTEM
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50 m. All Kinds of Soil Pipes, cables etc., exceeding 80mm dia but not exceeding 300mm dia
250
-
362
... More
Providing and laying non-pressure NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
-
-
-
... More
a) 150 mm Dia
260
-
347
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design ::
150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
-
2148
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with RCC Top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix ( 1 cement :4 coarse sand: 8 graded stone aggregate 40 nominal size), inside plastering 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand), finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (Heavy duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay FPS(non modular) bricks of class designation 7.5
20
-
10144
... More
Providing & fixing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per I.S:10910 on 12 mm dia steel bar conforming to I.S:1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 165 mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) complete as per design.
30
-
423
... More
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
25
-
4852
... More
SEPTIC TANK AND SOAK PIT
-
-
-
... More
Constructing brick masonry septic tank with 75 class designation bricks in cement mortar 1:4 (1 Cement : 4 Coarse Sand) foundation concrete 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate with 40 mm nominal size) inside and outside plastering 12 mm thick with cement mortar 1:3 (1 Cement: 3 Coarse Sand) with water proofing compound finished with a floating coat of neat cement inside and making connection for pipe in Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) neatly finished complete as per standard design including disposal of surplus earth.
-
-
-
... More
Cover of Septic tank to be RCC 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate with 20 mm nominal size) with a provision of 2 Nos. SFRC cover and frame (Heavy Duty) HD-20 grade designation confirming to IS: 12592, including centering, shuttering and re-inforcement all complete as per attached sketch.
-
-
-
... More
Internal size 3.0 m x 4.0 m x 2 m effective depth
10
-
134530
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
24329
... More
DRINKING WATER SYSTEM
-
-
-
... More
Supply, Installation, Testing & Commisioning of reverse osmosos cum chiller unit with 40 lit. storage capacity, including 2no. Tapscfor outlet.
20
-
60954
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements