Ayodhya Development Authority Tender

FLOORING : WALL VITRIFIED TILE FOR TOILETS Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR-8.31

PLASTER OF PARIS : PROVIDING AND MAKING POP MOULDING AS PER DESIGN INCLUDING SUPPLY OF ALL MATERIALS AND LABOUR T&P AND SCAFFOLDING ETC. COMPLETE JOB

PLASTER OF PARIS : PROVIDING AND MAKING POP CORNICE AS PER DESIGN INCLUDING SUPPLY OF ALL MATERIALS AND LABOUR T&P AND SCAFFOLDING ETC. COMPLETE JOB

PLASTER OF PARIS : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.DSR-13.26

PAINTING: Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. PWD

PAINTING: Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade for Two or more coats PWD

PAINTING: Ceiling painting with acrylic emulsion paint of approved brand and manufacture to give an even shade for Two or more coats PWD

PAINTING: Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (WALL+CEILING) PWD

WOOD WORK: Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/ 120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) D2-1350X2100

WOOD WORK: D3-1200X2100

WOOD WORK: D4-1050X2100

WOOD WORK: FD-2100X2100

WOOD WORK: W1-900X1200

WOOD WORK: V1-1200X900

WOOD WORK: V2-900X900

WATER PROOFING: Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately) DSR-14.88