Archaeological Survey Of India Tender

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand). (Rate Including G.S.T.)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). (Rate Including G.S.T.)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes and sizes. (Rate Including G.S.T.)

12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand). (Rate Including G.S.T.)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. (Rate Including G.S.T.)

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Rate Including G.S.T.)

25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand). (Rate Including G.S.T.)

Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (Rate Including G.S.T.)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. (Rate Including G.S.T.)

Finishing walls with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). (Rate Including G.S.T.)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Rate Including G.S.T.)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminum (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). (Rate Including G.S.T.)

Providing and fixing glazing float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Rate Including G.S.T.)

Provision for Electric items for Interpretation Center etc. including labour charges etc complete. In all respect. 17-A- 50-watt Led tube light with hanging arrangement cold white. (Rate Including G.S.T.)

17-B- Wall Mount Fan 400mm (Rate Including G.S.T.)

17-C- 12 Modular switch board with 7 switches and 1 sockets and 2 nos fan regulator (reputed brand) (Rate Including G.S.T.)

17-D- 1.50 sq.mm copper wire Reputed brand. (Rate Including G.S.T.)

17-E- 1.00 sq.mm copper wire Reputed brand. (Rate Including G.S.T.)

17-F- 2 core 6 mm poly cab cable / equivalent. (Rate Including G.S.T.)

17-G- 12 inch Exhaust fan. (Rate Including G.S.T.)

17-H- Labour / electrician charges (Rate Including G.S.T.)

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. Granite of any colour and shade Granite of any colour and shade. (Rate Including G.S.T.)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. (Rate Including G.S.T.)

Supply & Fitting of plumbing articles in R.O. Drinking such as UPVC pipe, G.I pipe, elbow, socket, nipil, nip, etc. including labour & Materials complete in all respect. 20-A- 15 mm C.P. brass taps. (Rate Including G.S.T.)

20-B- Supply & Fitting of plumbing articles in R.O. Drinking such as UPVC pipe, G.I pipe, elbow, socket, nipil, nip, etc. including labour & Materials complete in all respect. (Rate Including G.S.T.)

20-C- S.S. Sink of size 18"x16"x8". (Rate Including G.S.T.)

Dismantling of 60 to 65 mm thick Red Sand Stone Flooring in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. (Rate Including G.S.T.)

Demolishing cement concrete ratio 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (Rate Including G.S.T.)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (Rate Including G.S.T.)

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. (Rate Including G.S.T.)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of Engineer in-charge. (Rate Including G.S.T.)

Repair Charges for wooden door with required materials & labour complete in all respect. (Rate Including G.S.T.)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. (Rate Including G.S.T.)

Providing and fixing 18 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately). (Rate Including G.S.T.)

Providing & Fixing of 50 micron thick graphic film including laminated & printed sheet pasted on 5 mm thick sun board with required adhesive material & labour complete in all respect. (Rate Including G.S.T.)

Providing and fixing 5 mm thick acrylic sheet in Panel frame fixed with make holes where necessary. (Rate Including G.S.T.)

Provision for S.S. Fastner/bolt/spacar with washer. (Rate Including G.S.T.)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.(Rate Including G.S.T.)