Animal Husbandry Department Tender

Hypodermic Needle (All metalic-hub and shaft both) 18*1.5" (Length of needle is shaft length excluding hub)

Hypodermic Needle (All metalic-hub and shaft both) 16*3/4" (Length of needle is shaft length excluding hub)

Hypodermic Needle (All metalic-hub and shaft both) 16*1.5" (Length of needle is shaft length excluding hub)

Full Rubber Apron, Standard

Non electric Autoclave Vertical (Portable) (SS-304) size-450 mm height and 300 mm dia, made of SS-304 grade, SS-304 lid, thick bottom for with standing direct flame heat, jointless rubber gasket. Should be fitted with pressure guage, steam release cock, safety valve, solid iron stand to support autoclave

LN2 pouring Spout, fitted with insulated jet and spl. Grade rubber stopper for neck locking

Dipstick Fiber Sheet, 1 Mt.

Straw Tweezer made of special grade plastic material to avoid heat loss, For handing straws of french medium/Mini and German Pattern

Artificial Vagina with metal valve, 35 cm.

Automatic Thawing Unit Electric 37˚ C

Sperm Processor/Sperm Warmer (Portable Frozen semen Thawing Unit) Portable Frozen semen Thawing Unit : Body made up of ABS Plastic (Acrylonitrily Butadiene Styrene Plastic) work on 230 V by converting it to 12 V & maintining the temperature at 370 C + 0.20 Cwith dual temperature display system (set temperature and ongoing temperature). Dry both having 6-7 hours battery backup after full charging. Thawing aluminium alloy block must hold four straws. Product weight 500 gm (0.5 Kg) only. Instrument provided with solar charging pannel, four wheeler/two wheeler charging unit also in the same port. Product should be 'ISO' nd 'CE' accredited

Disposal A.I. Gloves, made of LDPE material, length 34 inch and should be made of less than 20 micron film. Lab test report is must for film used

Crystoscope As per IVRI specification

Animal Sling, Large animal sling is composed of 4 legs (Approx. 6 feet) of 2 inch iron pipes of length. These pipes are welded on top by square of 26*26 inches of similar diameter pipe. Legs of two opposite sides are welded transversely with a similar diameter pipe located at 3 feet and 3 inch height from ground. The other two straight side are kept open. A 1.5 ton chain pulley is welded on one of the transverse pipe. The wire of chain pulley reaches to a rectangular welded pipe of 4'10''*2' size through five pulleys of 4'' size. The edge of this pipe have many hooks to attach a strong synthetic cloth (5'6''*5'3''). This cloth has five holes to accommodate the limbs and udder/sheath of the animal. This cloth has five strips, put of which to on either ends. These strips are attached with iron rings at their respective ends. Animal's legs are taken out of the holes of the cloth and cloth's rings are attached to the rectangular pipe through hooks. the chain pulley is used to put animal in comfortable position by either pulling up or keeping down. The entire device is portable and can easily be shifted through wheels. (As per enclosed line diagram)