Allahabad Development Authority Tender

Construction of granular sub-base by providing close graded material of Grade-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401

Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 metre and lead upto 30 mtr. including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation, trenches or into the plinth and removal & disposal of surplus earth as directed by the Engineer in-charge upto a distance of 30m from the foundation trenches. (SI. No. 251/2022)

Sand filling with local sand including supply of all labour, material and T&P etc. required for proper completion of the work.(SoR 2022)

Concrete with 4 cm gauge stone bllast fine sand of 1.25 F.M. and cement in proportion of 8:4:1 in foundations and under floors including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (SI No. 281/2022)

RCC works with cement approved coarse sand and 2cm gauge approved stone grit in the proportions 1:1.5:3 excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour T&P etc. required for proper completion as per direction of E/I. (SOR 2022)

M.S. or Iron work in Plain work such as RCC or R.B. work including bending for proper shape and including supply of steel & its wastage bend, hooks and authorized overlapping shall be measured and including cost of binding wire. (SI. 504/2022)

Providing & laying coloured and textured imprinted cast in place concrete flooring, applying finishing the top surface, in accordance with sprinkling of colour hardener at the rate of 2.7 kg./sq.mt. Floating the surface application of release agent, stamping the concrete with stamping tools, cleaning the surface with water jet and application of acrylic based sealer (Bomanite or equivalant) for finishing complete as per directions of the engineer-in-charge. The work includes providing and Laying av. 100 mm thick M25 grade BMC / RMC concrete  including well compaction, necessary finishing top surface, side supports, leveling, ;pumping, curing, compound etc. complete.  Treatment of Construction Joints by Groove cutting of size 4 mm x 20 mm in panel size approximately 3mtr x 3 mtr all complete as per approved design, pattern & direction of Engineer in charge. (DSR 5.33 A 2.1/2021) +top 861.00 approved rate smart city (AR)

Providing and fixing 160mm dia PVC pipes, for drainage spout including cost of all labour and materials complete as per direction of Engineer in Charge. (approved rate based smart city

Providing and fixing 110mm dia PVC pipes, for weep holes of drain including cost of all labour and materials complete as per direction of Engineer in Charge. (DAR18.9.10)/2021

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge-External Works(DSR-18.9.1/2021)

Repairing of water line leakages or connections in all respects etc.,complete as per direction of Engineer in Charge(As per site requirement-5% in Total length Lumpsum)approved rate smart city

Removal of tree roots including disposal of same

Making connection of G.I distribution branch with G.I main of following sizes by providing nd fixing tee, including cutting and threading the pipe etc., complete 50 to 80mm nominal dia bore(DAR 18.13.1/2021)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm),including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).(DSR 16.69) Based A Rate smart city approved rate

Painting or Varnishing new work in small areas with one coat (upto one sq.mt) of ready mixed priming paint and two coats of approved superior quality ready mixed pait or varnish including supply of all materials, labour and tools and paints etc. required for proper completion of the work. Paint to be used should confirm the I.S.I No. 103-1950. (sor 641+642/2022)

Providing and applying white cement based putty For Outer wall of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR 13.80)

Providing and fixing precast perforated SFRC cover and frame (HD20 grade) 600x600mm square size complete as per specifications. ( approved rate based smart city

M-150 Brick work in 1:4 (1 Cement & four fine sand of 1.25 F.M.) mortar in foundation including supply of all materials, labour & tools & plants etc. required for proper completion of work. (SI. No. 305/2022)

12mm thick cement plaster with 1:4 cement and approved coarse sand mortar over brick work minimum thickness not to be less than 1cm including supply of all materials ,labour, tools and plants etc., required for proper completion of work as per the direction of engineer in charge.Excluding GST SOR 13.11C/2022

Dismantling of RCC or R.B work including stacking of dismantled materials with in 60m distance as directed by Engineer - in- charge (Lump Sum Quantity)sor 694/2022

Dismantling lime or cement mortar brick work including stacking of dismantled materials with in 60m distance as directed by Engineer - in- chargesor 692/2022

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 450 mm dia. R.C.C. Pipe (DSR 19.35.1 /2021)

600 mm dia. R.C.C. Pipe (DSR 19.35.2 /2021)

Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.sor 281a/2022

Supply and fixing of Mainhole cover.

Supply and Fixing board.

Survey of Total Servy machine and Drwaing