Allahabad Development Authority Tender

SITC of 9 mtr GI Oct. Double Arm Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with bracket (1 Mtr length each ) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete Rate SOR 2018/646

S/F Steel tubualr Pole 9 M. Long designated 410 SP-32 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. Rate SOR 2018/613

S/F S.T. Double MS Pipe Bracket incliding nipple with fabrication required Nuts bolts clamps Complete 53 Kg Each Rate based SOR 18 in allrespect. Weight basis (14671/154 kg of 53 x95 per Kg)

Earthing of pole by MS earthing rod of 20x2500mm and 6 SWG earthing wire etc complete Rate PSR in ADA

S/F of followign capacity of Automatic street light cubicle control Panel painted with anti corrosive alkeli and acie proof paint considting of tme switch TSO 100 serive/Digital type with Contactors, HRC fuses, 100 Amp MCCB isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect . Rate SOR 2018/807

S/L of 6 Sq mm Twin Flate unarmoured cable complete with proper connections PSR in PDA

S/Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt Rate SOR 2018

S/L of 16 Sqmm 4 Core Al conductor PVC Insulated armoured served sheathed 1100 volts grade at a deopth of 750mm below groundlevel over a cushion of 756 mm. Thick sand all around and protectedwith burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable sie or as directed by the E/I, complete Rate SOR 2018/501

S/F of 16 Sq mm cable Lugs Complete Rate SOR 2018/504

S/L of 50 mm dia (OD-50 mm nominal) DWC HDPE pipe 6 Kg ISI marked alongwith all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Ii complete with fitting and cutting. Jointing etc, Rate PSR in Kumbh 2025

Trenchles Drilling with 100 mm for LT dia HDD for carring of Cable on Road Crosing with Repairing of all internal water connection/Sever Connection PSR in Kumbh 2025 complete in all respect

Painting of the electric pole with 2 coats of Thinner or required chemical with proper cleaning of GI Poles but on M.S Poles Two Coats of Al Paint after red oxyde Primer complete Rate SOR 2018/634

Supply and fixing of 150 Watt LED street light Fitting having die cast aluminium body and diffuser with driver set suitable for 90 Watt. Confirming to IP 66 Protection complete in all respect. Rate SOR 2018/1425

Supply and fixing of 90 Watt LED street light Fitting having die cast aluminium body and diffuser with driver set suitable for 90 Watt. Confirming to IP 66 Protection complete in all respect. Rate SOR 2018/1425

Dismantling & Store /Street light Poles /PCC/Rail as per direction of UPPCL with Loading unloading cartage of Pole embedded in brick ballast & CC foundation PSR in Kumbh 2025

Removal & Refixing of old Pole Complete with required excavation Back filling grouting as per SOR as required.

Removal & Relaying of LT Cable below 50 Sqmm Rate PSR

Removal & Relaying of LED 90 to 150 watt as required with Replacement of driver & connector for suiteble capacity Rate MR

S/P of Reflecting Red/Yellow colour 230 mm x 3 Nos. wide strip 3M make around the pole above 1.5 Mt from GL Rate PSR in Kumbh 2025

SITC of Mini mast light VAK make with Grouting in 1:3:6 CC 500x500x1800 mm. The decorative poles made of Durable Mild Steel with a total height of 10meter above ground level. The pole bottom section of 160mm dia x 5mm thickness x 6500mm length and glowing mid-section of 150mm dia, 3000mm long and top section of 76mm dia, 500mm lenght, thickness 3mm with decorate mini mast light Rapple of 320W. The Service door shall be provided at bottom part of the pole which equipped with a C clamp with sliding nuts to acommodate a built in connection box. The control gear tray is prewired with MCB, terminal connectors for loop In loop out arragement. The base plate of the pole shall be dsighned with elongated foundation holes for fine alignment of the pole during installation. The pole glowing part of 3000mm gives the tri-colour combination with homogeneous light effect. The tricolour diffuser is made of PMMA and made in Tri-colour Saffron-White-Green with lenght of 1000mm each. The optical system has been carefully engineered to provide correct illumination and enhanced security. Rapple lifht fixture shall be made of die cast aluminium with proper fringes for heat dissipation. Light output of source is more than 110Im/watt, CRI70, Surge protection 10K, operating voltage 140-270V. The Mini mast tricolour decorative post light pole will be as per attached detail drawing. Fitting is IP65, wired with Branded OSRAM or equivalent make LED and Fulham or equivalent constant current driver. Proper thermal management for longer life of fixture. Led burining of 50,000 hours. The decorative luminaire pole primarily coated with primer than epoxy resin and top coated with UV stabilized MRF PU powder coat and cured. The decorative note is suitable for outdoor lighting application Poles is comnlete in all resper as per direction of E/I. Rate Based MR