Aligarh Development Authority Tender

Providing and fixing Arm and Shoulder Wheel of size 1300x1200x1350 mm make of Green Gym or Equivalent fabricated with main post of 140mm dia and 3.0 mm thick rest of the pipe are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tabular steel and hot dipped galvanized, and powder coated using Akzo nobel or equivalent of 80-120 micron thick. All welding joint of pipe are robotic welded with joint scalloped as necessary and dressed off removing sharp egde and burrs. Zinc primer paint to be applied at all welding points prior to finishing Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-In-Charge. Equipment to be fitted within built limiter to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolt with the base plate cover, all complete as per direction and approval of Engineer-In-Charge regarding material shape of equipment colour on metal, seat and base cover plate and fixing of equipment etc.

Providing and fixing of Chin up Bar size 26300x305x2640 mm make of Green Gym or Equivalent fabricated with main post of 140mm dia and 3.0 mm thick rest of the pipe are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tabular steel and hot dipped galvanized, and powder coated using Akzo nobel or equivalent of 80-120 micron thick. All welding joint of pipe are robotic welded with joint scalloped as necessary and dressed off removing sharp egde and burrs. Zinc primer paint to be applied at all welding points prior to finishing Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-In-Charge. Equipment to be fitted within built limiter to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolt with the base plate cover, all complete as per direction and approval of Engineer-In-Charge regarding material shape of equipment colour on metal, seat and base cover plate and fixing of equipment etc.

Providing and fixing Air Walker of size 100x550x1480 mm make of Green Gym or Equivalent fabricated with main post of 140mm dia and 3.0 mm thick rest of the pipe are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tabular steel and hot dipped galvanized, and powder coated using Akzo nobel or equivalent of 80-120 micron thick. All welding joint of pipe are robotic welded with joint scalloped as necessary and dressed off removing sharp egde and burrs. Zinc primer paint to be applied at all welding points prior to finishing Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-In-Charge. Equipment to be fitted within built limiter to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolt with the base plate cover, all complete as per direction and approval of Engineer-In-Charge regarding material shape of equipment colour on metal, seat and base cover plate and fixing of equipment etc.