Airports Authority Of India Tender

Supply of wall mounted Light Arm made of 40 mm Dia 'B' class G.I pipe having suitable straight and bend of length min 1.0 meter, tilt angle not more than 20 degree suitable for installation of Street light fittings etc. complete as required.

Providing & fixing of IP-66 SMC box of size 155mm x 210mm x 92 mm on the existing wall, including providing & fixing 01 no. 6A SP MCB and 01 no. four pole connector, connections etc. complete as required. (Make: Hensel, Model No : DK1616 G or equivalent)

Installation of wall mounted Light Arm made of 40 mm Dia 'B' class G.I pipe having suitable straight and bend of length min 1.0 meter, tilt angle not more than 20 degree suitable for installation of Street light fittings with suitable clamps (min thickness 3 mm) and 04 nos. anchor fastner i/c fixing of SMC Box on wall for incoming and outgoing cable termination etc. complete as required.

Installation, Testing and Commissioning of LED (30 W) fitting on existing 3.50 mtr street light pole (straight and bend of length min 1.5 meter) with 3 x 1.5 sqmm PVC insulated copper conductor round cable from cable looping box to fitting etc. complete as required.

Installation, Testing and Commissioning of LED (30 W) fitting on existing wall mounted Light Arm (straight and bend of length min 1.0 meter) with 3 x 1.5 sqmm PVC insulated copper conductor round cable from SMC box to fitting etc. complete as required.

SITC of outdoor type feeder pillar box with double door weather proof fabricated from 14 SWG MS sheet duly inhibited dust and vermin proof and powder coated complete with rubber gasket, hinged, to be accommodate having IP 65 protection, doors removable gland plate for cable entry. feeder pillar to be installed on the angle iron stand of size 50mmx5mm having four legs and to be mounted in CC base of suitable size etc i/c cement concrete foundation complete as required. 1) 200 A 4 Strip aluminium busbar chamber with DMC/SMC supporting insulators and MS shrouding - 1 set. 2) FP MCCB 125 A, 36KA - 1 No (For Incoming) 3) FP MCCB 125 A, 36KA -1 No , 4P MCB 63 A- 1 No, 4P MCB 32 A- 2 No, 2P MCB 16 A- 2 No (For outgoing) 4)0-500V, 3 phase digital multi function Ammeter voltmeter meter. 5) CTs 200/5 - 1 set 6)R,Y,B Pilot indicating lamps (Cluster LED type) with 6 nos. control 6 Amp. SP MCB -1 Set for incommers. 7)(0-24 Hrs)Astronomical timer switch with 63A FP contactor-01 No.

Supply of XLPE/PVC insulated, PVC sheathed aluminium conductor armoured power cable of 1.1KV grade confirming to IS 7098 (Part I) 1978 with upto date amendments etc as required for the following sizes.(Make : As per approved list.)

3.5C x 70 sqmm

4C x 16 Sqmm.

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground ( 75 cm below ground level including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Supplying and Laying of additional 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE pipe along with all accessories like socket, bend, couplers etc. complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) in the same trench in one tier horizontal formation including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5C x 70 sqmm

4C x 16 Sqmm.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/Metal/DWC HDPE pipe as required. Above 35 sq. mm and upto 95 Sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/Metal/DWC HDPE pipe as required. Upto 35 sq. mm.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Providing, laying and fixing 80 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangment and watering pipe etc. (with charcoal/coke and salt) as required.

Providing and laying earth conncection from earth electrode with 6 SWG dia G.I. wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.