Agra Development Authority Tender

Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. All kinds of soil. (Ch. No. 4 S.I.No.251) SOR-2022-23

Class-150 (Non Modular) brick work in 1:4 Cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work. (Ch-6 Item No. 6.1) SOR 2022-23

Sand filling in plinth excluding supply of necessary quantity of sand from a distance not exceeding 8 Kms from the side of work and including watering dressing etc. required for proper completion of work (Lead upto 30m & lift 1.5m) (labour only) (Ch-4 Item No. 255) SOR 2022-23

Providing and laying cement concrete in 1:2:4 of not less than strength of M-150 Stone ballast (20 mm nominal size) approved coarse sand and cement, curing complete, Including cost of form work. In Foundation and floors. (Ch no- 5 SI. No6 SOR 2022-23)

Providing and laying Vitrified tiles in floor with lean concrete of 600x 600mm sizes (thickness 10mm), with a water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. including 75mm thick base with concrete 1:4:8 complete as per E/I (Ch no- 14 SI. No11.41.2 SOR 2022-23)

12mm thick Cement plaster inproportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm. In girth and finished even and smooth. (Chapter 13 S.I.2) SOR 2022-23 (ii) 1 cement : 4 Coarse sand

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. (Ch-12 S.I. no 10 SOR 2022-23)

Ms roof SOR 12.1.1 page 32 (Ch-11 S.I. no 3i SOR 2022-23)

Tarfelt steel on ms foor sheet 3.5 no. M.R.

Ceilling fan bajaj crest neo 1200mm 3 blade M.R

Ttube light with fitting Item no. 1413a SOR Elect. Page 195 (Electrical SOR 2018)

switch

socket three pin havells

board SOR elect. Page 69

Regulator for fan SOR elect. Page185

wire 1c x1.5mm2 Copper wire.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Ietm no. 1 SOR 2022-23 ch-24

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid Ietm no. 2 SOR 2022-23 ch-24

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar tapsItem no.3c SOR 2022-23 ch-24

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Single half stall urinal with 5 litre PVC. automatic flushing cistern

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm

Providing and fixing PVC pipe conforming to IS make working pressure 6 Kg/SqCm incuding testing labour T&P and all complete fittings item.32 ch-23 sor 2022-23 (110 mm diameter)

140 mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15 mm nominal dia Pipes (ch-23 S.I. no 7 a c SOR 2022-23)

25 mm nominal dia Pipes

Supply and Fixing Pvc. Sintex water tank etc. All complete. (Chapter-19 SI. No. 2) SOR 2022-23

Exhaust fan havells fhvvedxowh08

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore (ch-23 Item no. 22 SOR 2022-23)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore (ch-23 Item no. 26 SOR 2022-23)

Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length i) 15 mm nominal bore (Ch-23 Item no. 21B SOR 2022-23)

ii) 20 mm nominal bore

S&F of 16 Amp. 240 V & 1 switch soket . M.R.