Agra Development Authority Tender

A - ILLUMINATION Supply Installation testing & commissioning of LED Linear Profile Light Wattage 14-18W (max) with high quality circuit design for stable and reliable performance, surface material should be made of Silicon with aluminium extrusion linear profile and other connecting accessories, Surface mounted flexible linear light suitable for facade edge lighting, Symmetric distribution. luminaire should have diffuse silicone based cover for soft illumination. Rated input supply of DC 24V constant voltage with external LED Driver, External ballast as accessory must be provided separately, Output colour should be 2700-3000K colour temperature; Luminaire luminous flux range of 1000-1400 Lm. The luminaire should have versatile optics for Asymmetrical Wall-washing effect, Mean rated service life L70(tq 25 °C) = 50,000 h. Luminaire body of aluminium extrusion with aluminium components. With flush-fitting cover and integral LED unit. Colour of luminaire body Grey/Silver, highly weather resistant/ powder-coated. Ingress protection rating : IP68, impact resistance level should be suitable to site condition. The LED system with control gear unit is suitable for operation on direct voltage supply grids. The luminaire should be provided with Electrical safety class I. Power Efficiency : 85%, Operating Temperature : -10°C to +55°C, Operating Humidity : 10%-90%, Housing to have customised base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The work also includes all the accessories , connections in main LT panel box and of all wires, cable, earthing and MCCB/MCBs as per Engineer-in-Charge with proper metal cages for lights protections.

Supply Installation testing & commissioning of high quality long throw mono colour linear wash light, Protection Rating : IP65, complying to BIS standard IS 10322 (Part 5/Sec 1): 2012, and having CE certification against standard EN 61547: 2009, EN 60598-1:2015, and EN 61347-2-13:2014 Mounting Structure : Additional wall mount yoke arrangements for fixing the lights. Rotation view : Inbuilt body rotating angle in degrees for uniform rotation angle to get the desired effect. Power consumption : 40-60W (max), CCT : 2700-3000K, (as per the design approval) Beam Angle Narrow/medium/wide (as per site requirement), Control : Manual/ON/OFF, Channel : 1 CH, Body : Die casted / extruded aluminium, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in colour mixing applications. Power Input : AC 110-230V, 50Hz or DC12/24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement) Glare : Specially designed glare free round shape 360 deg / 3 unit. Focussing area/LED will be kept 90 Deg perpendicular below the glare free optic. Size of the LED optic & glare unit must be equal or +/-2% higher to achieve the maximum intensity and less glare. This additional arrangement can be fixed or removed on the application. Glare free optical design for human viewing angle from a distance within 2-3 Mtr. Toughened transparent glass sealed above the glare free unit. Painting : 7 tank processed chemical treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C , lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total protection class of IP 65 & IK07. Luminaire is inclusive of Integral male/female waterproof connectors , driver, accessories for fixing ( nut, bolt, clamps etc ) with structures in pre wired conditions as per IS. Light testing standard should be LM79, LED Driver, IP65 or higher, IK05 or higher etc.Reports from NABL/UL/Intertek laboratory. The work also includes all the accessories , connections in main LT panel box and of all wires, cable, earthing and MCCB/MCBs as per Engineer-in-Charge with proper metal cages for lights protections.

Supply Installation testing & commissioning of 3000K VERY NARROW LONG THROW ROUND PROJECTOR WASH LIGHT with snoot, enabled with Powerful LEDs& anti‐aging and anti‐UV high optical efficiency temperature‐resistant lenses, suitable for outdoor applications of Façade Lighting, depending on design and site requirement, with Die-cast aluminium housing, powder-coated finish , Power consumption should be 250-300W (max) at steady state full intensity, Luminaire luminous flux range of 9000‐ 10000Lm. Colour rendering index CRI ≥ 80 for white LEDS's and power factor of complete luminaire ≥ 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non‐integral power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 25°C. Ingress Protection ≥ IP 66. Impact resistance level ≥ IK 07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : ‐10°C to +50°C, Operating Humidity : 10%‐90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM‐80, Reports from NABL/UL/Intertek laboratory. Soft copy of IES file should be submitted along with bid. The work also includes all the accessories , connections in main LT panel box and of all wires, cable, earthing and MCCB/MCBs as per Engineer-in-Charge with proper metal cages for lights protections.