Agra Development Authority Tender

Supply of 1.5x3 core cable for pump connection and conduting arrangement.

Supply of 1.5x4core cable for light connection & conduting arrangement up to control room.

PVC Conduit for pump and cable for light.

Earthing of pump and panel with material & earthing wire.

21w x 12v LED Light, Waterproof luminaries with array of high output of LEDs housed in compact enclosure,  with elastomeric seal.  Special polymide cable gland.  Compact socket head fasteners and mounting bracket . The housing, top cover and bracket are in noryl construction, fasteners of stainless steel make: phillips/eveready/unicor.

"B" Electrical System Preparation of concrete foundation, installation, testing and commissioning and earthing for approx. 3~3.5 M Pole. The concrete foundation shall be of size 500 mm long, 500mm wide and approx. 1400mm deep with necessary excavation, providing & laying in position 1:2:4 RCC with laying base concrete: 150 mm thick (1:4:8 i.e. 1 cement: 4 coarse sand: 8 graded stone aggregate; 40mm nominal size). Providing, straightening, cutting, bending and placing in position reinforcement column of cold twisted bar of 12 mm dia. x 1600mm long (Approx.) x 8 Nos. and reinforcement ring of cold twisted bar of 8mm dia. x 1400 mm long (Approx.) x 8 Nos. (with 190 mm spacing), M-16x600mm 'J' Type 4 Nos. Foundation Bolt EN8-GR., casting RCC 1:2:4 including positioning of foundation bolt (Template) & PVC Tee & PVC Pipe of 65 mm dia. for cable entry at desire level strictly as per drawing; and as per direction of Engineer-in-Charge as required.

S.I.T.C. 1100Volts grade cable as per I S: 7098, pt.1(latest edition) with stranded Aluminium conductor; XLPE insulated, multi-core, bunched, armoured/un-armoured with overall heat resistant type ST-2 PVC insulation / Copper stranded conductor; PVC insulated as per I S: 1554 (latest edition) armoured/un-armoured with overall heat resistant type ST-2 PVC insulation. Cable shall have nominal identification plates at both ends ('supply from' &; supply to'). The sizes are as follows: 3C x 4 sq. mm. 2XWY

3C x 6 sq. mm. 2XWY

3.5C x 35 sq. mm. A2XFY

3C x 95 sq. mm. YWY

Supplying and making end termination with brass compression gland and copper/aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE copper / aluminium conductor cable of 1.1 KV grade as required. 3C x 4 sq. mm. 2XWY

3C x 6 sq. mm. 2XWY

3.5C x 35 sq. mm. A2XFY

3.5C x 85 sq. mm. A2XFY

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

120 mm dia (OD-120 mm & ID-103 mm nominal)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7-meterlong etc. with charcoal/ coke and salt as required.

Supplying and laying 32 mm X 6 mm G.I strip including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer).

Supply, installation, testing and commissioning of outdoor type Feeder Pillar-2,3,4,5,6 (Double door type-IP54) of suitable size not less than 30 cm and up to 45 cm deep made out of 16 SWG thick steel sheet duly compartmentalized having 4 strip busbar of 100 amp capacity, double door with spring loaded Allen key type locking arrangement for inner compartment and separate cupboard type concealed locking arrangement for outer door. (Panel will have separate compartment for electric supply co.) duly rain and dust protected. The panel shall be fixed on M S angle iron frame work of size 50mmX50mmX6mm (NS) 90 cm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement, 2 sand and 4 stone aggregate 20 cm) and having following accessories mounted inside the cubicle panel i/c connections, inter connections, earth studs, painting etc. as reqd. Incoming: 415 V, 63 Amps TP + N + E (4 strip) Cu. Busbar (16 KA): 1 set. Voltmeter 0-500 Volt 96 sq.mm flush type with selector switch:1 No. Ammeter, 96 sq.mm flush type with selector switch & 250/ 5 Amp CTs 1 Set Indicating lamps (RYB) with control HRC fuse with fuse fitting: 1 Set Outgoing: 32 Amp., 2 pole, 10 KA, 230V, 50 Hz MCB: 10 Nos Power contractor 2 pole, 32 Amp.,230V, 50 Hz.: 8 Nos. Astronomical Timer (Ref: 04764, Legrand make or Eqv. From Hager/Siemens): 1 Set 10 Amps, DP MCB Category - B: 2 No. Contact multiplier: 6A, NO/NC as required: 1 No Selector / Test switches as required in control circuit: LS Danger notice plate. Note: The contactors shall be controlled by a Digital Astro Timer with adjustable time of switching 'ON' and 'Off' the external lights throughout the year; mounted inside the Feeder pillar.

Stand Alone DMX controller with Zone management and 16-bit channel management. RDM Enabled. Extensive external triggering operations via Dry Contact ports, TCP/UDP along with Calendar Triggers. Ethernet Integration. IOS/Android APP based wireless control. 1024 DMX channel control with an option to get a paid upgrade to 2048 channels. DC5-5.5V Input via external adaptor. Up to 32BG memory. Using light show authoring software to select from standard 10 effects, adjust effect settings such as color, speed, and brightness. make: phillips/eveready/unicor.

DMX converter with 3 and 5 pin XLR points for programming of lights make: Phillips, eveready,Unicor

DMX Splitter- The DMX-512 splitter shall have minimum one DMX input and six DMX output connections, the sockets being standard 5-pin AXR connectors. The opto isolated DMX-512 splitter shall have a power on LED and DMX active LED indication on the front panel. The opto isolated DMX-512 splitter input shall be internally terminated. Phillips, eveready,Unicor

SITC of Workstation with intel Xeon processor with Intel Mainboard/Intel chipset motherboard.SSD Hard drive 500 gb( 2 nos.) for Raid 1. Nvidia GTX 950 – GTX 970 graphic card. 16 GB RAM Tower cabinet with 750 PSU with 750 PSU ,DVDdrive.Windows 7/8.1 Professional 64 bit.

Supply, Installation, Testing and Commissioning of 4 Output Server with following.

24 inches Flat LCD Display Monitors with Optimal Resolution of 1920 x 1080 at 60 Hz having Brightness 250 cd/m² (typical).

Supply, installation testing and commissioning 60 KVA UPS, true on- line UPS 3 Ph double Conversion with all safeties and protection and suitable capacity sealed maintenance free 12 V batterie with a 30 mins backup time on full load with M open MS Battery rack and cable with paralleling kit.

Supply, installation testing and commissioning Small Business 24 port Gigabit switch and 2 x Mini GBIC fiber Uplinks.

Bandwidth of 3840x2160 as per site requirement.

Fibre optic cable with required accessories.

Cat6 twisted unshielded pair cable.

Remote device monitoring Panel for temperature, humidity etc.

Surge Protection System.

200KVA Servo Voltage stabilizer.

All Audio, video, DMX Cables and Connectors.

"C" Civil Jobs S/F of designer Kiosks/ Portable cabin with all complete as per direction of E/Ic.

S/F of designer benches with all complete as per direction of E/Ic.

Raising of existing boundrywall up to a total height of 5 Mtr. with M.S. grill & green fencing cover.

Porta cabin size of 7m x10m x 3m with rcc base work.

Seating arrangement for the show for 100 nos. of pax as audience.

200 KVA DG Set.

"E" Operation & Maintenance charges Operation & Maintenance charges for 1st year (@0% of cost).

Operation & Maintenance charges for 2nd year (@1% of cost).

Operation & Maintenance charges for 3rd year (@1.5% of cost).