Agra Development Authority Tender

240 sq. mm 3.5 core.

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 16 sq. mm.

10 sq. mm.

240 sq. mm.

Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 75 watt to 90 Watt and Confirming to IP 66 Protection having company LOGO engraved complete in all respect including labour. CAT-AAA. 8250-9900 system lumens high power LED with lenses, 110lm/W, PF0.95, THD10% at full load, CRI70, potted driver set (Not circuitory), phase to phase protection at 440 V & 300V auto cut and re-start feature, with 5 year warrantee.

Supply and fixing of decorative 40 to 45 Watt 4000-4500 lumens LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect. CAT-AAA 4400-4950 system lumens 110lm/W, PF0.95, THD20% at full load, with 5 year warrantee.

S/F of Decorative 4 Mtr. long made of mild steel tubes with cast aluminium embellishment, primer coated and painder with polyurethane paint different type of brackets for single, twin or tripple luminaire post top mounting and drop down mounting. Provision of service window (in pole) at bottom comprising four way 25 Amp. connector terminal and AMCB. The pole will be mounted with four number anchor bolts all as per foundation drawing. Vipin S.T. Poles Pvt. Ltd. make or equivalant as approved by E/Ic.

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing and lenses built with mandatory driver set suitable for 140 to 150 Watt. Confirming to IP 65/66 protection complete in all respect including labour. CAT- AAA 1540-16500 system lumens high power LED with lenses, 110lm/W, PF0.95, THD10% at full load, CRI70, potted driver set (Not circuitory), phase to phase protection at 440 V & 300V auto cut and re-start feature, with 5 year warrantee.

S/F of Bus Bar Chamber 100 Amp. single phase 8 way with copper bus bar wall mounted. (63437.00 / 20 = 3171.85)

Supply and Wiring of submains with two nos. of 2.5 sq. mm. FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T & P required for proper completion of the work as directed at site by Engineer in charge.

Making suitable earthing of ST/Rail Pole with 2.5 M long 20 mm dia M.S Rod with 7/16 SWG GS wire in 15 mm dia 2.0 M long GI pipe duly clamped with 2 nos. of clamps and binding on pole including cost of labour & T&P etc required for proper completion of work.

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.

Supply & erection of 600 mm long cross arm of 50 mm x 50 mm x 6 mm mild steel angle iron with necessary clamps, bolts, nuts etc. on poles complete in all respects including painting with aluminium paint.

Supply & erection of "D" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint.

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out, Micor processer Release IPR2 ) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfonners and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming - 630 Amp. / 415 Volt ACB-1 No. Outgoing - (c) 200 Amp. MCCB-3 Nos. & 63 Amp. MCCB-1 No. (ii) Cat. B. Pannel Cubicle Type.

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Supplying, installing, testing and commissioning of 315 A TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required.

S&F of 100 Amp. 415 V metal clad TP HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect. Cat. B.

Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.

Dismantling of old pole with labour, T & P all complete as per direction of E./Ic.

Replacement of damage fountain motor Commissioning, Testing , repair including painting of fountain body with replacement of fountain nozzle and other parts of the fountain all complete required for proper completion of work as per direction of E./Ic.

Operation of fountain & park light with labour T & P. alll complete for one year after completion of work.