Agra Development Authority Tender

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (For thickness of tiles 10 mm to 25 mm) (CH-17 S.I. No. 13 SOR 2022-23)

12mm Thick cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth, chamfers and finished even and smooth. (CH-13 S.I. No. 13.4.1. SOR-2023-24) (I) 1 cement : 4 Coarse sand

Providing and laying Vitrified tiles in floor with lean concrete of 600x 600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. including preparation of 75mm thick base with concrete 1:4:8 complete as per E/I. (CH-14 S.L. No. 16 SOR 2023-24)

Supply and fixing of W.B. counter granite. (AR)

Supply and making of wardrobe in WPC board with pasting of acrylic mica sheet and all complete, labour and materials. (MR)

Providing and fixing of 3D Sesor Mirror (size 4x4 = 16 Sqft) (A.R.)

Providing and fixing of Towel Rail (Make Jaquar) (A.R.)

Providing and fixing of Table Top Wash Basin with Bottle Trap (Make Jaquar). (A.R.)

Providing and fixing of Urinal (Make Jaquar). (A.R.)

Supply and fixing of Urinal Sensor. (A.R.)

Providing and fixing of Angle Valve with Wall Flange (Make Jaquar). (A.R.)

Providing and fixing of Health Faucet (Make Jaquar). (A.R.)

Providing and fixing of Blind. (A.R.)

Providing and fixing of Mixer Cock (Make Jaquar). (A.R.)

Supply and fixing of Soap disk. (AR)

Supply and fixing of Bib cock. (A.R.)

Providing and fixing uplasticised PVC connection pipe with brass unions: (CH-23 S.I. No. 10 SOR 2023-24) 45 cm length - 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. (CH-23 Item No. 2A SOR 2023-24) 15 mm nominal outer dia pipes

25 mm nominal outer dia pipes (CH-23 S.I. No. 26 SOR 2023-24)

Providing and fixing PVC pipe conforming to IS make working pressure 6 Kg/SqCm incuding testing labour T&P and all complete fittings (CH-23 S.I. No. 32 SOR 2022-23) 110 mm diameter

Supply and fixing of Steel Jali. (AR)

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (CH-12 S.I. No. 10 SOR 2023-24)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : (CH-23 S.I. No. 16 SOR 2022-23) 25 mm nominal bore

Steel 304 (Gauge Fitting ISI marked only) Steel door handles with screw 125mm long. (CH-1 S.I. No. 20 SOR 2023-24)

Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. (CH-27 S.I. No. 7 SOR 2023-24)

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete: 125x64x2.50 mm (CH-27 S.I. No. 4 SOR 2023-24)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 300X10mm (CH-27 S.I. No. 6 SOR 2023-24)

Supply and fixing of door magnet with all complete, materails and labour. (M.R.)

Supply and fixing of Napkin paper holder. (AR)

Supply and fixing of Paper holder. (AR)

Supply and fixing of Steel Chain.

Supply and fixing of Single Piece W.C. (Make Jaguar). (AR)

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete including curing the cost of all materials, labour, T & P etc complete. (CH-15 S.I. No. 13.26 SOR-2023-24)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply oa all labour material and T&P required for proper completion of work. (CH-15 S.I. No. 13.46 SOR-2023-24)