Agra Development Authority Tender

Supplying of High strength, Non shrink Mortar Mapegrout T40 for Treating Honeycomb & Plastering in order to get required Reinforcement cover & groove filling. Providing and apply of waterproofing coating

Surfaces on which Mapeband TPE 2mm thick is to be applied must be free from oil, grease and paint and must be free from dust and areas which are either uneven or loose. Paintwork or toppings must be removed by sandblasting or with a sanding disc. This operation is indispensable if the surfaces have been treated with polyester, epoxy or polyurethane resin or if it is made from glassy material. If Mapeband TPE is to be applied on metallic surfaces, remove all traces of rust, paint, grease, etc. by sandblasting down to bare metal. When Mapeband TPE is 200mm to 300 mm wide applied, the surface must be perfectly dry. To obtain a joint with a clean, well-defined profile, apply masking tape around the outside surface of the joint, in order to obtain an area which is 1 cm wider than the width of the TPE tape to be spread with adhesive (fig. 1). After laying, bonding and finishing off with a trowel, remove the masking tape. (Lowest Quotation rates)

Providing and fixing sheet covering over expansion joints with iron screws as per design. Providing and fixing in position Stainless steel plate-0.6 mm thick as per design for expansion joints.:300 mm wide. (Lowest Quotation rates)

Re-filling the Soil (Lowest Quotation rates)