Agra Development Authority Tender

Providing and fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to the fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2012 retro reflective sheeting with back frame MS angle of 35x35x5 mm. Legneds letters numeral and borders etc, should be as per Morth specification No- 801.3.7. The sheeting shall have a pressure- sensitive adhesive of the adhesive-tack type requiring no heat, solvent other preparation for adhesion to a smooth clean surface in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials( shall be fixed on the Back frame MS Angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM 04956-09 shall be Pressure fixed. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal adhesion, impact resistance, specular glos and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international/Government Laboratory/institute by the manufacturer of the sheeting and in case the certificate is obtained from international conditions. It should also be obtained from Indian condition within 3 years of launcing if product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artifical accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situtation, the Employer/Client, if so disires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall be include all materials, labour, T&P, transportation, installtion and Incedentals all complete as per direction of the Engineer-in-Charge.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels. Plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) (AR).