Agra Development Authority Tender

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). (CH-7 DSR No. 4.1 SOR 2020-21)

Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors. (CH-5 S.I. No. 275 SOR 2020-21)

Black granite Polished stone flooring with 18mm thick marble stone, as per sample of marble apporved by Engineer-in-charge, over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Black Granite Stone quality. (CH-14 Item No. 8 SOR 2020-21)

Kota stone slab flooring over 20mm thick (average) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 Coarse sand) 25mm thick. (CH-14 S.I. No. 10 New Item SOR 2020-21)

Providing and fixing of 110 mm diameter PVC pipe conforming to IS make working pressure 6 Kg/SqCm incuding testing labour T&P and all complete fittings (CH-23 S.I. No. 32 SOR 2020-21)

Front Entrance :- Construction of granual sub base (GSB) by providing coarse graded material spreading in uniform layers with moter grader surface, mixing by mix in place method with rotavator at OMC & compacting with vibratory power roller to achieve the desired density, complete as per clause Table-400-2 S.N. 4.2 (C) MORT&H specification no. 401 (53mm - 26.50mm @ 35%, 26.50-4.75mm @ 45%, 2.36-mm and below @ 20%)

Laying of I shaped precast Interlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. Including VAT (CH-20 Item No. 19 SOR 2020-21) 80 mm (Rubber molded Coloured)

Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E / I. (CH-5 S.I. No. 4.1.3 SOR-2020-21)

Supply and laying 3.5 kg hardner per sqm on cement concrete surface D-watering and finished all necessary T & P including supply of all materials, labour etc. required for proper completion of the work.

Supply of RCC hume pipe NP-3 & Collor (350mm). (CH-1 S.I. No. 31 SOR 2020-21)

Constructing masonry Chamber brick work with common burnt clay F.P.S.(non modular) bricks of class designation 150 in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar :3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design (CH-23 S.I. No. 22 SOR 2020-21) 60x60x75 cm Inside

90x90x100 cm Inside

120x120x100 cm Inside

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (Analysis Rate)

Miscellaneous :- Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer in charge within a distance of 60mtr. ( 200feet)

Dismantling Cement Concrete or brick or granolithic floors with stone flagged or tiled floor, including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60 meters

Providing and fixing Red Sand stone jall 40 mm thick throughout in cement mortar 1:3 (1 cement 3 coarse sand)., including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment. matching the stone shade, jali slab without any chamfers etc.

Supplying & fixing "OVAL Dustbin" 60 Ltrs Capacity (Height;- 760mm X Dia 480mm) Perforated Steel Bin with Galvanised Liner. (Zinc rich primer then powder coated) With Anchor fastener bolts, Color RAL 9005 Met Black. Make Chevron’s or equivalent make. Complete in all respect as per Engineer in Charge.

S/F of reinforced cement concrete bench complete with fixing as per directed by E/I as per given approved design and drawing all complete. (6'x4' size including fixing with cement concrete). Appd. Rate

FIRE FIGHTING SYSTEM :- Supplying, Installation, Testing & Commissioning of central govt./ state govt. authorised Fire authority approved Electric Driven Main fire pump for Sprinkler / Hydrant applications suitable for automatic operation and consisting of following details given as A, B, C, D, E,F,G and H. (A) Horizontal Single / Multi stage Centrifugal End suction, back pull out type pump complete for delivery of below mentioned discharge ,including bypass arrangement for Testing of pump (B) Material of construction : Pump Casing - Cast Iron, Impellor - Bronze, Shaft - SS 410, Packing - Mechanical Seal. (C)Pump shall be capable of furnishing not less than 150 % of rated capacity at a head not less than 65 % of the rated head. The shut off head shall not exceed 120 % of rated head. (D) Squirrel cage induction motor suitable for 3 phase, 415 V, 50 HZ, Ac supply 2900 / 1450 RPM T.E.F.C confirming to IP:55 , of required HP suitable for the above pump ,along with flexible coupling , coupling guard complete in all respect . ( E) Common bed plate fabricated from mild steel channel for installation of pump and Motor. (F) Pump is to be inspected by third party like RITES / PDIL at manufacturer's premises and inspection report is to be submitted. (G) Suitable cement concreat foundation duly plastered with anti vibration pads. (H) All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 1620 LPM suitable for 56 Mtr Head, single stage, 2900 RPM

Supplying and Fixing of Y type strainer fabricated out of cast iron/ steel body, strainer shall have 1.6 mm. thick stainless steel sheet perforated screen with 3 mm. dia holes with flange at both ends complete with nuts, bolts, washers, gaskets etc of following sizes. complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 100 mm dia

150 mm dia

Supply, installation, testing and commissioning of dual plate non-return valve (PN-16) of following sizes confirming to IS:5312 -1975 complete with flanges,rubber gasket, nut,bolts, washers etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 100 mm dia

150 mm dia

Providing, installation, testing and commissioning of Brass ball valves (PN-16) duly ISI marked confirming to IS : 9890-1981 complete with flanges,Nuts, Bolts, washers, gaskets etc of following sizes as required complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 25 mm dia

Providing & fixing 100mm dia bourden type, Stainless steel dial type pressure Gauge (0 - 16 Kg ) range, 3 / 8 " BSP bottom entry on Pump Delivery Line complete with Ball valve complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Supplying and fixing of Hose Cabinet of size 750 mm x 600 mm x 250 mm made of 1.6 mm thick MS sheet with 6 mm thick glazed glass doors including necessary locking arrangement suitable to accommodate external hydrant with butterfly valve, 2 Nos 15 Mtr. Long Hose pipe, 1 No. branch pipe, mounted on wall OR raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant, as required.

Supply, installation, testing and commissioning of dual plate non-return valve (PN-16) of following sizes confirming to IS:5312 -1975 complete with flanges,rubber gasket, nut,bolts, washers etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 100 mm dia

150 mm dia

Supplying and fixing cylindrical air vessel of continuous welded construction fixed at riser top made of 250 mm dia, fabricated out of 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia drain valve,release valve,safety valve pressure gauge with required accessories and painting with two coats of Red Oxide and two coat of post office red enamel paint as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Supplying and fixing cylindrical air vessel of continuous welded construction for pump room made of 450 mm dia,fabricated out of 10 mm thick dished ends and 8 mm thick MS sheet, 2000 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia drain valve,air release valve,safety valve pressure gauge with required accessories and painting with two coats of Red Oxide and two coat of post office red enamel paint as required complete in all respect. Appropriate Test Certificate/ report of product/ accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Supplying, Installation, Testing & Commissioning of pressure switches for Main, Jockey, Terrace pump and standby Diesel pumps, including necessary control wiring From pressure switch upto control panel and Ball valve complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Fire Fighting works - MS pipes in ground:- Supplying, Laying, Testing and Commissioning of following sizes (NB) ISI marked heavy class M.S. pipes including cutting, screwing, welding etc. and providing all fittings such as elbows, reducers, flanges, gaskets, nuts, bolts and washers etc. including applying with one coat of readymix primer, wraping the pipe with 4 mm thick wraping tape of IWL/Kotak makes, laying the pipe so that the top of the pipe is at a depth of one meter below ground level including excavating trenches and then refilling the soil in layers not exceeding 20 cms. in depth, consolidating each deposited layer by ramming, watering etc.complete as required. 100mm dia.

Jockey fire pump- Installation, Testing & Commissioning of ELECTRIC MOTOR DRIVEN, horizontal end suction type, centrifugal fire duty operation pump, (with mechanical seal, bronze impeller and carbon steel EN-8 shaft) capable for a DISCHARGE of 180L.P.M. at a HEAD of 70 MTRS., coupled through flexible coupling (i/c coupling guard) with totally enclosed, fan cooled squirrel cage 4 pole induction motor suitable for operation on three phase AC supply of 415 + 10% Volts, 50 Hz, fixing the coupled pump and motor on a common structural base frame, making a suitable cement concrete foundation and mounting the complete pump-motor set on the foundation using suitable numbers of anti vibration mountings as per the design / recommendations of the manufacturer and as per the detailed specifications.

MAIN ELECTRICAL PANEL - Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed non-drawout modular firefighting panel, fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted complete with Aluminium bus bars, inter-connection with copper conductor FRLS wires / aluminium strips, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per specification attached as required. INCOMING - (a)- 400Amp. TPN, MCCB 50 kA rating with thermal magnetic release, ON indications - 1 set. Four strip 600 Amps. Aluminium bus bar - 1 Set. (C) - (0 - 400 A) CT operated digital Ammeter cum voltmeter with selector switch & 3 nos. CTs ratio 400/ 5A 10VA burden & accuracy class of 1.0 - 1 set. Coloured LED (Red, Yellow, Blue) phase indicating lamp with control MCB's - 3Nos. OUTGOING - (a)- 250A, 3P , 35kA, MCCB along with CT operated Ammeters (0-250A), set of 3 CTs of 250A/ 5A, 10VA burden, 1.0 accuracy, ASS and coloured LED type (RED, GREEN) ON/OFF indication - 1 No\. 63A, 3P, 35kA MCCB along with CT operated Ammeter (0-60A), set of 3 CTs of 60A/ 5A, 5VA, ASS and coloured LED type (RED, GREEN) ON/OFF indication - 1 No. (c)- 16A, DP MCB - 1 No. 32A, TP MCB - 1 No. (e)- Fully Automatic Star Delta starter suitable for 75/ 100 HP motor including contactors, relays, SPPR, pushbuttons, indications, auto/manual/off selector switch etc. complete (For Main electrical pump) - 1No. Fully Automatic Star Delta starter suitable for minimum 15HP motor including contactors, relays, SPPR, pushbuttons, indications, auto/manual/off selector switch etc. complete.(For Jockey pump) - 1 No. (g)- DIESEL ENGINE FIRE PUMP SECTION- (i)- Set of control system components such as Aux. Switch , electronic relays,timers, contractors ,triping relays, rotary switches for AC ON /DC ON etc. to make the equipment automatic as per functional requirements. Battery charging unit of double rate comprising of suitable rating Voltage Transformer, semi conductor rectifier, RC Filter network, fuses on AC & DC for protection and trickle / boost charging selector switch. The charger should be cut off when the Engine is started and the batteries shall be charged from Battery charging alternator provided on the Engine. (iii)- Necessary alarms, visual indicator etc. Different selector switches, push button with protections feature etc in the cubical panel. (h)- CONTROL PANEL SECTION - (i)- Colour coded internal wiring and connections etc. with suitable size of Fire retardent, low smoke PVC insulated copper wire / Aluminium Bus bar from incoming to bus bar, switch gears, starters, meters, indicating lamps, interlocking with Diesel pump set panel etc. complete as reqd. : 1 Set (ii)- Providing visual indicator & audible Hooter /Siren with a range of 1 KM including wiring and interconnection etc. : 1 No. (iii)- Battery charging unit of double rate comprising of suitable rating Voltage Transformer, semi conductor rectifier, RC Filter network, fuses on AC & DC for protection and trickle / boost charging selector switch along with 3 numbers 12 V Sealed maintenance free batteries of suitable capacity. (iv)- AUTO-MANUAL selector switch for each pump. (v)- Lock out indication for electric fire pump as well as audio alarm with silencing facility.(vi)- Manual resetting push button for return to normal operation of locked out unit as reqd.. (vii)- Terminal facility for repeat indicator of various audio and visual indications.Fire panel as above

PIPING AND ACCESSORIES - HYDRANT AND HOSES - Four way fire brigade inlet - Supply, Installation, Testing and Commissioning of instantaneous four way fire brigade inlet connection conforming to relevant IS ammended upto date for tank / ring main consisting of 63 mm Gun metal Quadra plate, male inlet coupling with plug & cap chain bends and other accessories etc. complete as reqd.

Fire hose - Supply, Installation, Testing and Commissioning 100% synthetic RRL FIRE hose (Type A), I.S.I marked 63mm dia x15m long with stainless steel male & female couplings (ISI marked) bound & riveted to hose pipes with copper rivets and copper wire as required.

Short branch pipe- Supply, Installation, Testing and Commissioning gun metal 63mm dia. Short Branch Pipe (ISI marked) with 20mm dia nozzle as required.

Landing Valve - Supply, installation, testing and commissioning of single headed gun metal ISI marked oblique pattern landing valve Type 'A' with a flanged inlet & one 63mm dia instanteous type female outlets complete with A.B.S. plastic cap and chain, twist release type lug and all accessories complete as required.

Supply, Installation, testing and commissiong of External Yard Hydrant stand post comprising of MS pipe 80 mm dia (heavy duty C class) from existing ring main to about 1 meter above ground level and single headed external yard hydrant valve with 80 mm dia flanged inlet, instantaneous FM Gun Metal coupling of 63 mm dia with cast iron wheel ISI marked, comforming to IS:5290 (Type A), with blank Gun Metal cap and chain etc. complete with all accessories as required.

First-Aid-fire Hose reel - Supply, installation, testing and commissioning of First-Aid-fire Hose reel wall mounting swinging type complete with drum, bracket, 20mm dia. 30M long high pressure thermoplastic hose reel tubing with gunmetal shutoff nozzle conforming to IS. The hose reel shall be as per IS:884-1985.

Supply and fixing of Selfie point heart with all complete as per direction of E/I.

Supply and fixing of Selfie point Cup with all complete as per direction of E/I.

Supply and fixing of Pencil Bench as per direction of E/I.

Supply and fixing of Book Bench as per direction of E/I.

Supply and fixing of Crawler as per direction of E/I.

Fabrication & Installation of LED based 3D letters (Agra Choupati & Zonal Park) Gate No. 1 (Size 42'x36").

Fabrication & Installation of LED based 3D letters with Zigzag type iron structure(Agra Choupati & Zonal Park) Gate No. 2 and 3 (Size 70'x36").

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Design supply and installation of Jumbo Umbrella of size 6 x 6mtr with PVC coated tensile fabric and easy manually opening & closing mechanism. Cost of base not included, RCC foundation to be provided by the client.

Supply and instalation of flex including printing of required matter and instalation in required pattern and place as per direction of Engineer incharge.

Providing & Installation Menu Printing ,shop side area size 24"×48" ( 12mm ply + 6mm mdf with PU paint + 6mm jali with Antique PU paint )

Providing & Installation Menu Printing ,shop side area size 24"×48" UV Screen painting on 3 mm transparent acrelic paint

Providing & Installation Sign / Name Board ,shop top side covring Size 9'×1'×1' (1"×1" m.s pipe freming + 12mm ply +6mm mdf with PU paint + 6mm mdf jali with PU Antique paint )

Lettering with MDF CNC Cutting Letter Font Size 6"×6" with PU antique paint ( 8mm thk mdf )

Providing and fixing of quartz counter for drinking water and wash basins area etc. including fixing of quartz stone slab of 12mm thickness layed over16 mm SGC board. Including Iron frame made up of 50mmx50mmx4.5mm square hollow pipe in required shape and size, complete as per direction of engineer in charge.

Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (Red sand stone) (Item No. 7.20.1 DSR-2021)

Providing,carving and Fixing of directional signages in Bansi paharpur stone of size 1000x500x50 mm.Engraving,painting of latters as per drawing and design.The signage stone shall be fixed on the post of same stone of size 120 x 120x 2450 above ground and 1/3 of total heigt of post shall be embedded in ground with neccesary earthwork and concreting etc.complete as per details and drawings and as directed by engineer incharge.

P and Fixing HAND DRYER STAINLESS STEEL FINISH complete in all respect as per direction of Engineer-In-Charge.

P&F Granite Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. Tiger / rajasthan Black or equivalent.

Providing and Installation of Exhaust hood of size 3600 x 900 x 500 mm in Full Stainless Steel ( in 18 Gauge S.S. 304 Grade ) With Baffle Filters & led light With tougnned Glass Cover including S.S. Cover Over Exhaust Hood of size 5400 x 400 and 3 Nos G.I. Connection Box / Flange in 24 gauge GI Sheet of Apx size 200 x 500 x 50 as per required, complete in all respect and as per Engineer in Charge.

Providing and Installation of Exhaust hood of size 2700 x 900 x 500 mm in Full Stainless Steel ( in 18 Gauge S.S. 304 Grade ) With Baffle Filters & led light With tougnned Glass Cover including S.S. Cover Over Exhaust Hood of size 4500 x 400 and 3 Nos G.I. Connection Box / Flange in 24 gauge GI Sheet of Apx size 200 x 500 x 50 as per required, complete in all respect and as per Engineer in Charge.

Providing and Installation of Exhaust hood of size 1200 x 900 x 500 mm in Full Stainless Steel ( in 18 Gauge S.S. 304 Grade ) With Baffle Filters & led light With tougnned Glass Cover including S.S. Cover Over Exhaust Hood of size 4500 x 400 and 3 Nos G.I. Connection Box / Flange in 24 gauge GI Sheet of Apx size 200 x 500 x 50 as per required, complete in all respect and as per Engineer in Charge.

Providing and Installation of Cooler with 120 ltr water capacity, complete as per standard spesification, as per Direction of Engineer in charge.

Supplying and installation Mosquito/insect Killer 2 tube 9” white) of height 28" width 12.5" and length 27.5" and approx weight 2 kg. of approved make, complete in all respect as directed by engineer in charge

Supplying and Fixing 26 Inches Big Spray Water Mist Fan of 6.5 Ft. Height with 45 Litter Tank Capacity 6-8 Hours Running Time of approved make, complete in all respect as directed by engineer in charge

Supply & fixing of Fiber reinforced Ferro cement cover with frame (light duty) designed for chamber, anti corrosive bitumen painted M.S. plate Rim and on M.S. lifting hooks additives & admixture like plasticizer shrinkage resistance compound abrasion resistant as per approved drawing and design complete in all respect of following duty & sizes. Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10

Square shape 350x350 mm precast R.C.C. manhole cover with frame - L.D. - 25

Water Supply :- Providing, lowering, laying, aligning and fixing of float valve system for the following diameter of C.I.with internal parts of auxiliary valve of copper float ball, gunmetal ball cap, brass lever, brass split pin, gunmetal piston & piston cap, washer of nitrile rubber with gunmetal body including all material, labour, hydraulic testing and commissioning as per technical specification and as per the direction of the Engineer. 150 mm dia

Fabrication, supply of flanged/ plain ended MS specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete (excluding flanged jointing wherever required) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet)

Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths S&S standard specials with rubber ring (EPDM/SBR) joints as per IS: 5382-1985 such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. Specials S&S DI K-7 Upto 300mm dia

Providing, lowering, laying, aligning, fixing in position at all level/ depths CI Class - B double flanged specials as per IS : 7181 in trenches complete (excluding jointing) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. for Pipe Size 80 to 150mm

Labour charges for inter connection of proposed pipe line with existing pipe line by digging of it, cutting of pipe, dewatering through pumps and satisfactory testing of interconnection and site clearance Pipe size 80 to 100 mm

Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846 amended upto date) PN 1.0 class of following dia complete (excluding jointing and jointing material) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. 100 mm dia. Category "B"

150 mm dia. Category "B"

Providing, installation, testing and commissioning of Bulk Flow Meter with removable mechanism class "B" confirming to IS: 4064/1 including all materials (excluding CI/DI fittings) and making connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipe line etc complete in all respect as per technical specification and as per direction of Engineer. BFM80 for DN 80 mm

Providing and making house service connections from water supply distribution pipe line upto 150mm dia and upto water meter chamber inside the property using MDPE (Class-PE 80) composite pipes upto 2 metre length including supply and fixing of ferrules, clamps, rubber sheets, tapping, compression fittings etc, complete including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. 20 mm dia service pipe

Providing, lowering, laying & jointing MDPE pipes (Class-PE 80) composite pipes for extra length for house service connections as per drawing and specifications complete including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. 20 mm dia service pipe

Providing and laying RCC NP4 pipe (with steel pushing collar) jointing with cement mortar joints by trenchless method adopting any suitable technology below ground at required depth including carrying out survey work at the job site for determining underground cable trenches like telephone, power cable, water & sanitary lines and resistivity tests for finding the soil strata using necessary equipments for completion of work, mobilizing of machineries and specialized crew at the job site, etc. complete in all respects, including excavation of drive pit and exit pit upto 3 metre depth with proper protection at the three sides, providing and casting of MS cutting edges for front shield and constructing thrust bed at designed level as directed by the Engineer, crane for handling of pipes, and any other machinery, tool & tackles required, complete in all respect as per specification and the direction of the Engineer 300 mm internal diameter

SITC of ISI mark( IS:8472) Monoblock submersible pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 2880/ 3000 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. 5.0 HP, 3-Ø, (14-18)Mtr, (11-14)LPS ( 5.0 HP x 4.00 Nos)

Electrical Work:- KP-5110 Drive way orna Florus Lighting Pole, Ht.4270 L1

KP-9204 Foundation Bolt, 4 Nos of M16 x 300 mm bolt with 2 Nuts & 2 Washer L1

KP-5107 Drive way orna Florus Lighting Pole, Ht.3660 L3

KP-9204 Foundation Bolt, 4 Nos of M16 x 300 mm bolt with 2 Nuts & 2 Washer L3

KP-2521 Cobra Rana Lighting Pole, Ht.3660 L4

KP-9204 Foundation Bolt, 4 Nos of M16 x 300 mm bolt with 2 Nuts & 2 Washer L4

KP-4356 Coralume Orna Florian Lighting Pole, Ht.4270 L2

KP-9205 Foundation Bolt, 4 Nos of M16 x 500 mm bolt with 2 Nuts & 2 Washer L2

KL-4093 In-Ground Luminaire, Dimension : Ø55 x 92, Wattage : 3W LED Asymmetrical L5

KL-2743 Sudo - Asy Frame, COD : 240 x 83 x 70, Wattage : 12W LED L6

KL-6805 Navi, Dimension : Ø166 x 153 x 423, Wattage : 1 x 45W LED L7

KL-5565 Vera Bollard, Dimension : Ø166 x 975, Wattage : 16W LED L8

Armoured Cable 3.5 core300.0 Sq.mm

Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect.

Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface,complete with 14 SWG copper earth continuity wire , GP Box and piano type switch and socket etc. complete in all respect.

S&F of 6 Amp. to 32 Amp. TP MCB (10 KA) C Curve : CAT B

S&F of 40 Amp. T.P. Isolator: CAT B

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core

35 sq. mm 3-1/2 core

120 sq. mm 3-1/2 core

Supply and fixing of recess/surface mounting round 24 Watt to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/ Reflector and driver set completed in all respects. CAT-AA

Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge.

25 mm dia 2 mm thick PVC conduit.

but 32 mm dia. PVC conduit.

Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

Supply and wiring of submains with 2 nos. 2.5 sq mm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge.

Supply installation testing & Commissioning of ISO certified company made high mast lighting system (as per PLG 07 of ILP UK techinical report no 7 of ILE UK /IS:875 Part-1 – 2015//BSEN10025/and IS:2062) consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm mast head frame assembly with full cover, including 1 No. LED 15 Watts aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement ( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, S.S. ropes (AISI 316, 7 / 19 costruction ), EPR insulated PCP sheathed trailing cable, including outdoor type control panel for auto on / off, reverse / forward motor operation and CC foundation of M - 25 grade complete as required as per IS 456/IS 2911. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135. ( See table P - 03 for specs.) OEM Must have Type test certificate for wind tunnel test for High mast fixtures. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .- 16.0 Mtr HM (in 2 section)