Agra Development Authority Tender

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply oa all labour material and T&P required for proper completion of work. (CH-15 S.I. No. 13.46 SOR-2023-24)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work including cost of all materials, labour, T&P etc. required for proper completion work. (CH-15 S.I. No. 3 SOR 2023-24)

Supply and fixing of PVC Panelling with all complete as per E/I. (Pre. Santioned Rate)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per (Cost of aluminium snap beading shall be paid in basic item): (CH-9 Item No. 9 SOR 2023-24) (i) With float glass panes of 8 mm thickness

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. (CH-23 Item No. 8 SOR 2023-24) 15 mm nominal outer dia pipes

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (CH-12 S.I. No. 10 SOR 2023-24)

Providing and fixing factory made Kitchen Cabinet Shutter/ Padition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) havinq density 60O Kg/cum and laminated on both side by lan'rinate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw hold ng capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. (CH-9 S.I. No. 16 SOR-2023-24)

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface, excluding grading, compete. (CH-11 S.I. No. 4 SOR-2023-24)

Pro\rcllng and fxing double action hydraulic floor spring of approved brand and manufacture conforming to lS : 63'15 ' having brand logo embossed on the body/ plate with double spring mechanism and door weight upto 125 kg' for doors including cost of cutting floors ,embeding in floors as required and making good the same matching to the existing floor flnishing and cover plates with brass pivot and single piece l\,4.S. sheet outer box with slide plate etc. complete as per the directlon of Engineer-in-Charge. With stainless steel cover plate minimum 1.25 mm thickness (CH-9 S.I. No. 10 SOR-2023-24)

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and '1.4mm wide aperture with matching wood beading (CH-9 S.I. No. 11 SOR-2023-24)

Providing & Fixing 1.00mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse sjde of adhesive bonding quantity conforming to lS : 2046 Type S, including cost of adhesive of approved quality. ('l.50mm thick) (CH-9 S.I. No. 6 SOR-2023-24)

Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. (Elc. Item No. 1406 SOR 2018) CAT-AAA

Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT-AAA (Elc. Item No. 1403 SOR 2018)

Providing and fixing of 35mm thick ISI marked flush door shutters conforming to IS : 2202 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked stainless steel butt hinges with necessary screws, steel handels, Siliding bolt, Door Stopper and tower bolt. (CH-9 S.I. No. 1 SOR 2023-24)

Supply & installation of split Direct Expansion air- conditioners suitable for operation on A/C supply single phase 50 Hz 230Volts with hermetically sealed compressor with air cooled condenser with DC inverter technology, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit. The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. (Elc. Item No. 1504 SOR 2018)

Supplying and fixing of power plug with 20A /250 volt flush type modular switch and 5 pin 20 amps /250 volt flush type universal socket on concealed ms box including supply of all material labour and TNP etc for proper completion of work. (For AC point) (Elc. Item No. 1139A SOR 2018)