Agra Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Agra Development Authority - ADA Tender
Civil And Construction
Eprocure
Opening Date5 Oct 2024
Closing Date30 Oct 2024
Tender Amount₹ 5,08,54,074.51
Costs
EMD
₹ 10,24,500Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ADAA_962924_2Tender No
09/2024-25Tender Authority
Agra Development Authority ViewPurchaser Address
-Website
http://http://www.adaagra.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Construction of granular sub-base by providing, laying, spreading and compacting of crushed aggregate material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density including protection of egdes of GSB layer, cost of all materials, labour, hire charges of machinery, lighting barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., complete as per clause 401. (Sanctioned rate)
156
472680
3030
Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (40 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E / I. (CH-5, S.I. No. 6 SOR-2023-24)
156
1029600
6600
Cast in situ cement concrete M20 Kerb and Channel 110mm top 450 mm in bottom 350mm height in M20 grade PCC on M15 grade foundation 150mm thick, foundation having 50mm projection beyond kerb stine, kerb stone laid with kerb laying machine, foundation concrete laid mannually all complete as per clause 409.
250
241250
965
Construction of subgrade and earthen shoulders - Earth work in embankment mechanically compacted to 100% proctor density in ordinary soil, excavation to be done in regular pits not exceeding 0.5m depth and work embannkment to be in 20 cm layers including ramming and dressing pulverisation the surf including supply of labour, royalty of materials, T&P, Roller and Water sprinkler with a lead upto 15km and earth shall be arranged by contractor.
1800
853200
474
Construction of granular sub-base by providing, laying, spreading and compacting of crushed aggregate material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density including protection of egdes of GSB layer, cost of all materials, labour, hire charges of machinery, lighting barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., complete as per clause 401.
700
2121000
3030
Construction of wet mix macadam (WMM) by providing, laying, spreading and compacting graded stone aggregate as per table 400-13, mixing in a wet mix plant at OMC, carriage of mixed materials to work site in tipper to paver, laid over a previously prepared surface using Paver finisher hydrostatic with sencor control to the required grade, level and alignment, compacting with vibratory roller to achieve the desired density including protection of edges of WMM layer, cost of all materials, labour, hire charges of machinery, lighting barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., complete as per clause 406.
900
2671200
2968
Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.
3500
98000
28
Providing and applying tack coat as per table 500-5 on prepared surface using bitumen emulsion including clearing of road surface by meachincal broom & dusting by air compressor and spraying by emulsion pressure distributor, including cost of all materials, labour, hire charges of machinery, loading, unloading with all lead and lift etc. as per clause 503.i) On granular surface - 2.5 Kgs/10 Sqm
3500
49000
14
ii) On bituminous surface - 2.0 Kgs/10 Sqm
3500
42000
12
Providing and laying dense bituminous macadam using crust aggregates as per table 500-9 of specified graded aggregates and filler material @2% by weight of aggregates, premixed with bituminous binder content quantity as per design mix, in 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour, transporting the hot mix in a tipper to paver at work site, laid over previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers as per clause 501.6 and 501.7 to achieve the desired compaction including cost of all materials, labour, hire charges of machinery, lead, lifts, loading, unloading, stacking, transporting etc. as per clause 505.
405
3577365
8833
Providing and laying bituminous concrete using crust aggregates as per table 500-17 of specified graded aggregates and filler material @2% by weight of aggregates, premixed with bituminous binder content quantity as per design mix, in 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour, transporting the hot mix in a tipper to paver at work site, laid over previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers as per clause 501.6 and 501.7 to achieve the desired compaction including cost of all materials, labour, hire charges of machinery, lead, lifts, loading, unloading, stacking, transporting etc. as per clause 507.
175
1985550
11346
Road Marking with Hot Applied Thermoplastic Compound with Refleftorislng Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holse. SOR-23-24, Chap-28, Item No-2
300
185400
618
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes. SUB HEAD : 10.0 STEEL WORK, Code No-10.16, DSR-2021
4000
592880
148.22
10.19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. SUB HEAD : 10.0 STEEL WORK, Code No-10.19, DSR-2021 (Vol-1)
1700
125987
74.11
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. SUB HEAD : 10.0 STEEL WORK, Code No-10.1, DSR-2021
101850
15096207
148.22
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m². Chap-11, Item No-3, SOR-2023-24
146
147460
1010
Providing and laying cement concrete in 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors. (Chap-5, Item No-3, PWD SOR-23-24)
107
631300
5900
12 m-16 m Span Overhead full gantry Signs (Providing and erecting overhead signs with a corrosion resistant aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans). (SOR-MORTH-802+201)
1
375495
375495.6
6M Span over head Cantilever Structure with 300 dia M S one Vertical post Supply, fixing & erection of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontle Truss shall comprise of 50 mm dia heavy class M S pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coals of synthetic enamel plant. The work includes construction of RCC Foundation of size 0.90x0.90x1.50 m of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean concrete in 1:3:6 cement coarse sand and 40 mm gauge stone ballast and RCC - M25 grade concrete including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforecement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORTH & H specification section 800 and IRC 67 2012 complete in all respect The Rates shall include cost of design febrication, supply, transporation, Local shifting Erection of Signage structure using cran, inclusive of all taxes etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge. (Chap-28, Item No-4, PWD SOR-23-24)
3
378906
126302
Retro Reflective Sheeting type-XI with 4 mm thick ACM Single side Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aliuminium composite panel face to be fully covered with Hign Intensity prismatic sheeting type IV as per IRC-67:2012 retro reflective sheeting with back frame MS angle of 35x35x5mm. Legends letters, numerals and borders etc should be as per MortH specification No-801.3.7. The sheeting shall have a pressure-sensitive adhesive of the aggresive-lack type requiring no heat, solvent other preparation for adhesion to a smooth clean surface in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be Pressure fixed. The retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal adhesion, impact resistance, specular glass and fungus resistance. 3 years outdoor weathering and its having passed these shall be obtained from International/Government Laboratory/Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively a certificate conforming to ASTM Specification (D 49858-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after reciept of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67.2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transpiortation, Installation and incidentals all complete as per direction of the engineer-In-Charge. (Chap-28, Item No-12, PWD SOR 23-24)
500
3316500
6633
Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-40 grade concrete with HYSD reinforcement conforming to IRC:21, at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design and as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified. (Reinforcement concrete 0.3 cum/Rmt and steel 28 Kg/Rmt)
195
1005030
5154
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work including cost of all materials, labour, T&P etc. required for proper completion work. (Chap-15, Item No-3, PWD SOR 23-24)
550
44000
80
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture: (Chap-15, Item No-4, PWD SOR 23-24)
600
75000
125
Providing and fixing metal beam crash barrier complete as per drawing and technical specification clause 811.
220
802340
3647
Supply and fixing RCC of N.P.-3 & NP-4 Hume pipe in proper postion as directed by E/l including cartage of pipe/collars up to 30m distance (labour only) excluding cost of 900mm dia (Chapter-1, Item-32) (Chapter-20, Item-10) SOR 2023-24
140
1085000
7750
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
8000
616000
77
Reinforcement cement concrete work in beams, suspended floors, roofs having balconies, shelves, chajja, bands, staircases and spiral stair cases above plinth level upto fifth floor lavel. including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3 ( 1 Cement : 1.5 coarse sand (Zone- III) : 3 Graded stone. Chap-5, Item No.13, SOR-23-24
48
427200
8900
Providing and Fixing ACP Sheet in Facade work on Toll Plaza …………….All Complete. (Rate as per lowest market quotation)
160
802400
5015
Part B- iz'kklfud Hkou dk fuekZ.k dk;Z Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including fitting watering and ramming of excavated earth into the trenches of into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. (Small work), Chap-4, Item No.1, PWD SOR-23-24
30
4500
150
Providing and laying cement concrete in 1:4:8 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of from work. In Foundation and floors. Chap-5, Item No.3, PWD SOR-23-24
2.6
14625
5625
Class-150 (Non Modular) brick work in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. Chap-6, Item No.2, PWD SOR-23-24
22
124300
5650
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) Chap-7, Item No.1, SOR-23-24
85
31450
370
Class-150 (Non Modular) brick work in 1:4 cement and Coarse sand mortar in super structure above plinth level supply of all materials, labour and T&P etc. required for proper completion of the work. Chap-6, Item No.5/6.8 A, SOR-23-24
108
659880
6110
RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement- All work up to plinth level: 1:1.5:3 ( 1 cement : 1.5 Coarse sand : 3 graded stone aggregate 20mm nominal size)
8
65600
8200
Reinforced cement concrete work in walls (any thikness), Including attachedpillasters, buttresses, pilinth and string courses, filets, coumns, pillars, piers, abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Chap-5, Item No.12/5.2, SOR-23-24 i) upto plinth level
2
16700
8350
ii) Above plinth level upto fifth floor lable
8
72400
9050
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
8900
749825
84.25
Reinforcement cement concrete work in beams, suspended floors, roofs having balconies, shelves, chajja, bands, staircases and spiral stair cases above plinth level upto fifth floor lavel. including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3 ( 1 Cement : 1.5 coarse sand (Zone- III) : 3 Graded stone. Chap-5, Item No.13, SOR-23-24
58
516200
8900
6mm Celling plaster 1:3 (1 cement : 3 fine sand) cement & fine sand in F.M. not less than 1.25, 1:3 including chiping of RCC surface before celling plaster. The cost of including all material, labour T&P and scafolding etc. Chap-13, Item No-13, PWD, SOR-2023-24
225
36000
160
Earth work is embankment in inordinary soil excavation to be done in regular pits not exceeding 0.50m in depth and work embankment to be dressing the surface to required leveles and slopes and also including suppy of material T&P lead upto 10 Km and earth shall be arrange by contractor, Chap-4, Item No.3, SOR-23-24 (Analysis Rates)
350
134750
385
12mm Cement plaster with cement morter in proportionof 1:4 cement & coarse sand of single coat for interior plastring upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In grith and finished even and smooth. Chap-13, Item No.2, PWD, SOR-2023-24
550
107250
195
15mm Cement plaster with cement morter in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles charmfers, and rounded angles not exceeding 80mm. In grith and finished even and smooth.
550
118250
215
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered well surface to prepare the surface even and smooth complete supply of all labour material and T&P required for proper completion of work. Chap-15, Item No-6, PWD, SOR-2023-24
1325
172250
130
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including cost of all materials labour T&P etc. required for proper completion. Chap-15, Item No-7, PWD, SOR-2023-24
775
77500
100
Finishing walls with Acrylic Smooth exterior paint of regulered shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply of all labour material and T&P required for proper completion of work (Chap-15 Item No.17, SOR-2023-24).
550
77000
140
Painting withsynthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work including cost of all materials, labour T&P etc. required for proper completion of work. Wood and steel. (Chap-15 Item No.03, SOR-2023-24).
25
2000
80
Providing and laying cement concrete in 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing complete, Including cost of from work. In Foundation and floors. Chap-5, Item No.6 SOR-23-24
5
33000
6600
20 mm Cement Plaster 1:3 (1 Cement : 3 coarse sand ) finished with a floating coat of neat cement.
160
52800
330
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
10
9800
980
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.: 80x1.25 mm M.S. laths with 1.25 mm thick top cover. Chap-10 Item No-4, SOR-2023-24
5
11250
2250
Providing and fixing ball bearing for rolling shutters.
2
440
220
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. SOR-I NO-11.37A)
160
110400
690
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plaster etc, including welding, grinding, buffing, polished and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the raaling with necessary accessories & stainless steel dash fasteners stainless steel bolts etc. of required size, on the top of the floor of the side of waist slab with suitable, arrangement as per approval of Engineer-in-charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts fasteners etc.) Chap-10, Item No-12, SOR-2023-24
400
140000
350
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) (CH-9
S.I. No. 13 SOR 2022-23)
66
537900
8150
Providing and laying Vitrified tiles in floor of 500x 500mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. Same as above but for 600X600mm size.
225
200250
890
Black granite Polished stone flooring with 18mm thick marble stone as per sample of marble approved by Engineer-In-charge over 20mm (average) thick base of cement morter 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and pollshing complete with : Black Granite Stone quality, Chap-14, Item No-9/11.23A, SOR-2023-24
95
366700
3860
Anti-Termite Treatment of the top surface of filled earth at the rate of 5 liters of emulsion per square metre of surface. Chap-8, Item No-3. SOR-2023-24
85
5950
70
Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of
0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (CH-12 S.I. No. 10 SOR 2023-24)
205
252150
1230
Painting top of roofs with bitumen of approved quantity @ 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a place of cloth lighly soaked in kerosene oil complete : With residual type petroleum bituman of grade VG-10. Chap-11, Item No-1, SOR-2023-24
90
10800
120
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coase sand : 4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. Chap-11, Item No-6, SOR-2023-24
2
450
225
10 cm thick (average) mud phaska of damped brick earth on roof laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa @ 35 kg. per cum. of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay F.P.S. (non modular) brick tile of class designation 10. (CH-11 Item No. 9 SOR 2023-24)
75
48000
640
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : in 75x75 mm deep chase. Chap-11, Item No-10, SOR-2023-24
50
9250
185
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in RCC slabs or beams during laying including painting the exposed portion of loop, all as per standars design complete. Chap-10, Item No-9, SOR-2023-24
10
1500
150
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : (CH-23 S.I. No. 16 SOR 2023-24) 25 mm nominal bore
5
2750
550
Providing and fixing uplasticised PVC connection pipe with brass unions: (CH-23 S.I. No. 21 SOR 2023-24) 45 cm length - 20 mm nominal bore
24
2880
120
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (CH-24 S.I. No. 1 SOR 2023-24)
2
7800
3900
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (CH-23 S.I. No. 7 SOR 2023-24) (B) 20mm nominal outer dia Pipes
80
18400
230
(C) 25mm nominal outer dia Pipes
60
18000
300
(E) 40 mm nominal outer dia Pipes
110
54450
495
Providing and fixing of Angle Valve with Wall Flange (Make Jaquar). (A.R.)
20
83440
4172
Providing and fixing of Mixer Cock (Make Jaquar). (A.R.)
1
14877
14877
Providing and fixing of Sensor Faucet for Wash Basin (Make Jaquar). (A.R.)
6
89262
14877
Providing and fixing of Urinal (Make Jaquar). (A.R.)
3
38868
12956
Providing and fixing of Bidspa Rimless Wall Hung WC, I-Flush with concearled body and Cistern (Make Jaquar) (A.R.)
4
171288
42822
Supply and fixing of Urinal Sensor. (A.R.)
3
2799
933
Supply and fixing of Bib cock. (A.R.)
8
29864
3733
Supply and fixing of Nahani Trap. (AR)
10
2740
274
Supply and fixing of Steel Jali. (AR)
10
3840
384
Supply and fixing of P-Trap. (AR)
2
548
274
Supply and fixing of Napkin paper holder. (AR)
4
7464
1866
Supply and fixing of Soap dispanser sensor. (AR)
6
7572
1262
Supply and fixing of Waste coupling popup. (AR)
6
9222
1537
Supply and fixing of Waste pipe. (AR)
6
744
124
Supply and fixing of Hanging seat cistern. (AR)
8
99696
12462
Supply and fixing of Concealed stop cock. (AR)
8
10536
1317
Supply and fixing of I-Flush Concealed Body. (AR)
4
46992
11748
Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent. (Ch-19 S.L. No. 2 SOR 2017-18)
2000
20000
10
Constructing brick masonary chamber for underground C.. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.L cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). R.C.C. top slab with 1:2.4 mix (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement: 5 fine sand. 10 graded stone aggregate 40 mm nominal size), inside plastening 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating cost of neat cement on walls and bed concretie etc complete as per standard design : (a) inside dimensions 455x610 mm and 45 cm deep for single pipe line with common bumt day FPS (nor modular) bricks of class Each designation M-150. (SOR- I NO-19.30)
4
19600
4900
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
3260
1630
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
10135
10135.05
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
2
757
378.93
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : - 250 mm dia. R.C.C. pipe
50
28705
574.11
Drilling of 200 mm. dia. T/W bore suitable for 110 mm. dia. Pipe all complete with labour T/P as per direction of E/I. (Jal Nigam Rate)
85
31450
370
Supply and lowring of 110 mm. dia. 6 kg/m2 PVC pipe (Phenolex or apb by E/I.) all complete. (I.S.I. Mark only) SOR 2019-20 Chapter 23/32
85
30600
360
Supply and pouring of pea gravel suitable for T/W bore all complete as per direction of E/I. (If required) (Jal Nigam Rate)
3
8850
2950
S/F of 110 mm. PVC pipe adoptar suitable for Item No. 2 (Quotation Rate)
1
205
205
S/L of 1.5 H.P. submersible pump set 65 mt. head. (Pluga, Crompton, KSB etc.) I.S.I. mark all complete. (Water filled type only) (KSB Pump Ltd. Rate)
1
15205
15205
S/F of 1.5 H.P. submersible motor controlled starter pannel all complete. Crompton make. (I.S.I. Mark only) (Quotation Rate, KSB Make)
1
2550
2550
S/F of 25 mm. gate valve all complete. Approved Make. (Jal Nigam Rate)
1
464
464
S/F 4 sqmm. 3 core copper cable all complete. (Jal Nigam Rate)
80
4480
56
S/L of 40 mm. dia. Red screen ASHIRBAD PVC pipe all complete. (Jal Nigam Rate)
60
10080
168
S/F of M.S. clamp made with 65x6mm x600mm long M.S. strip suitable for 110 mm. dia. PVC pipe for holding all complete.(Jal Nigam Rate)
1
200
200
S/F of 10 mm. nylon rope for pump support all complete required for proper completion of work. (Market Rate)
60
1050
17.5
Class-1500 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of E/Ic. (S.I.No.305 / 2017-18)
2
11300
5650
12mm thick Cement plaster in single coat of fair side of single of half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm. In girth and finished even and smooth No. extra for mixing any additive. 1 cement : 4 fine sand (Not Less than in 1.25FM). (CH-13 S.I. No. 13.4.1 SOR 2023-24)
5
1000
200
20 mm. nominal outer dia. pipes. (Ch.-23, S.I. No. 9 B PWD Specification No. 18.9.2 / 2019-20)
4
620
155
40 mm. nominal outer dia. pipes. (Ch.- 23, S.I. No. 9 (E) PWD Specification No. 18.9.5 / 2019-20)
5
1600
320
C.I. cover with frame 110mm. Internal dia. & MS clamp for 40 mm. dia. pipe. (S.I. No. 68 PWD SOR 2019-20) (ISI mark only)
4
240
60
S/F of 20mm size C.I. bib cock with brass rod heavy quality complete. (UP PWD SOR 2019-20) S.I. No. 75 (b) (ISI mark only)
1
85
85
Providing and laying cement concrete in 1:2:4 of not less than strength of M 150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E/Ic. (Ch.- 5, S.I. No. 6 / SOR 2019-20)
0.1
645
6450
Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. (SOR-2018 S.I. No. 1139A)
10
6250
625
Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. But in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit (SOR-2018 S.I. No. 131C)
60
38580
643
Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch and socket etc. complete in all
respect including matching colour wash. but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. (SOR-2018 S.I. No. 134C)
20
6700
335
Wiring point for fan / fesh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash. but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper Conductor cable as earthwire drawn inside the conduit. (SOR-2018 S.I. No. 133C)
10
7080
708
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. CAT- AAA (SOR-2018 S.I. No. 1423)
5
44250
8850
Supply, receiving, storing, handling, assembling in position the following accessories as described below complete with all accessories, control gear as requred etc. (Mittal Associate file No-26/UPT/ADA/2017-18 Item No- Ex-46) Ceilling Mounted Fan (1200 MM) (QAR)
10
14440
1444
20 W LED Lamp (QAR)
50
13300
266
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Mittal Associate file No-26/UPT/ADA/2017-18 Item No-Ex-43) Single pole
14
2786
199
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( (Mittal Associate file No-26/UPT/ADA/2017-18 Item No-Ex-44) 40A
3
1017
339
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (H/28/3) (j ) 25 sq. mm 3-1/2 core
110
44000
400
S & F surface/Flush mounting 4ways V TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT A (SOR-2018 S.I. No. 1026C)
1
8560
8560
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip
Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified (SOR-2018 S.I. No. 725C)
1
8070
8070
Providing and Fixing ACP Sheet in Facade work on Toll Plaza …………….All Complete. (Rate as per lowest market quotation)
605
3034075
5015
Part C&;wfVfyVh lsUVj dk fuekZ.k dk;Z Excavation in foundation in ordinary Soil (Loam, Clay or sand) including, lift upto 1.50 M and lead Upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as per directed by the Engineer-in-charge up to a distance of 30 M from the foundation trenches.(CH-4 Item No. 1 SOR-2023-24)
14
2100
150
Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors. (CH
5 Item No. 2 SOR 2023-24)
2.5
14062
5625
Providing and laying D.P.C. 40mm thick with Cement concrete Consisting of One Part Cement, 1.5 Part of Coarse Sand and three part of approved 10mm grade stone grit and including water proofing material as directed by the Engineer-In-Charge in the proportion as specified by the manufacturer. (CH-7 S.I. No. 1 SOR 2023-24)
8.5
3145
370
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top to give smooth finish and proper grade. (SOR-2023-24-Ch-5 S.L. No. 3)
0.5
2950
5900
Class-150 (Non Modular) brick work in 1:4 Cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work.
(CH-6 S.I. No. 2 SOR-2023-24)
9
50850
5650
Class-150 (Non Modular) brick work in 1:4 Cement and Coarse sand mortar in super structure above plinth level upto floor five level including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cm. (CH-6 S.I. No. 2+5 SOR-2023-24)
25
152750
6110
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (CH-10 Item No. 11 SOR 2022-23) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1200
126000
105
Providing corrugated G.S. sheet roofing including Vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required1.00 mm thick with zinc coating not less than 275 gm/m² (CH-11 item No. 3 SOR 2023-24)
70
70700
1010
Red Sand Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - exposed face fine dressed with rough backing. (30mm thick) (CH-18
Item No. 1 SOR 2023-24)
90
171000
1900
12mm Thick cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth, chamfers and finished even and smooth. (CH-13 S.I. No. 13.4.1. SOR-2023-24)
(I) 1 cement : 4 Coarse sand
220
44000
200
Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge. (CH-4 Item No. 253(a) SOR 2023-24)
33
4620
140
Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per directionof the E / I. (CH-5 S.I. No. 4.1.3 SOR-2023-24)
5.5
36300
6600
Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete including curing the cost of all materials, labour, T & P etc complete.
(CH-15 S.I. No. 13.26 SOR-2023-24)
220
28600
130
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply oa all labour material and T&P required for proper completion
of work. (CH-15 S.I. No. 13.46 SOR-2023-24)
220
30800
140
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) (CH-9
S.I. No. 13 SOR 2022-23)
50
407500
8150
Providing and laying Vitrified tiles in floor with lean concrete of 600x 600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. including preparation of 75mm thick base with concrete 1:4:8 complete as per
E/I. (CH-14 S.L. No. 16 SOR 2023-24)
59
52510
890
Black granite Polished stone flooring with 18mm thick marble stone, as per sample of marble apporved by Engineer-in-charge, over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Black Granite Stone quality.
(CH-14 Item No. 8 SOR 2023-24)
7
27020
3860
Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of
0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (CH-12 S.I. No. 10 SOR 2022-23)
54
66420
1230
Providing and fixing PVC pipe conforming to IS make working pressure 6 Kg/SqCm incuding testing labour T&P and all complete fittings. (CH-23 S.I. No. 32 SOR 2023-24) 110 mm diameter
22
9900
450
b) 75 mm diameter
12
3480
290
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. (CH-23 Item No. 8 SOR 2023-24) 25 mm nominal outer dia pipes
75
34500
460
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : (CH-23 S.I. No. 16 SOR 2023-24) 25 mm nominal bore
4
2200
550
Providing and fixing uplasticised PVC connection pipe with brass unions: (CH-23 S.I. No. 21 SOR 2023-24) 45 cm length - 20 mm nominal bore
14
1680
120
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (CH-24 S.I. No. 1 SOR 2023-24)
2
7800
3900
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (CH-23 S.I. No. 7 SOR 2023-24) 40 mm nominal outer dia Pipes
20
9900
495
Providing and fixing of Angle Valve with Wall Flange (Make Jaquar). (A.R.)
12
50064
4172
Providing and fixing of Table Top Wash Basin with Bottle Trap (Make Jaquar). (A.R.)
2
32280
16140
Providing and fixing of Urinal (Make Jaquar). (A.R.)
5
64780
12956
Supply and fixing of Bib cock. (A.R.)
4
14932
3733
Supply and fixing of Nahani Trap. (AR)
10
2740
274
Supply and fixing of Steel Jali. (AR)
12
4608
384
Supply and fixing of P-Trap. (AR)
2
548
274
Supply and fixing of Napkin paper holder. (AR)
2
3732
1866
Supply and fixing of W.B. counter granite. (AR)
2
54900
27450
Supply and fixing of Soap dispanser sensor. (AR)
2
2524
1262
Supply and fixing of Waste coupling popup. (AR)
4
6148
1537
Supply and fixing of Waste pipe. (AR)
4
496
124
Supply and fixing of Paper holder. (AR)
2
3732
1866
Supply and fixing of Concealed stop cock. (AR)
8
10536
1317
Supply and fixing of Cistern plate. (AR)
8
13176
1647
Supply and fixing of Soap disk. (AR)
2
2524
1262
Supply and fixing of I-Flush Concealed Body. (AR)
5
58740
11748
Supply and fixing of Rimless Single W.C. (AR)
5
156465
31293
Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent. (Ch-19 S.L. No. 2 SOR 2017-18)
2000
20000
10
Drilling of 200 mm. dia. T/W bore suitable for 110 mm. dia. Pipe all complete with labour T/P as per direction of E/I. (Jal Nigam Rate)
85
31450
370
Supply and lowring of 110 mm. dia. 6 kg/m2 PVC pipe (Phenolex or apb by E/I.) all complete. (I.S.I. Mark only) SOR 2019-20 Chapter 23/32
85
30600
360
Supply and pouring of pea gravel suitable for T/W bore all complete as per direction of E/I. (If required) (Jal Nigam Rate)
3
8850
2950
S/F of 110 mm. PVC pipe adoptar suitable for Item No. 2 (Quotation Rate)
1
205
205
S/L of 1.5 H.P. submersible pump set 65 mt. head. (Pluga, Crompton, KSB etc.) I.S.I. mark all complete. (Water filled type only) (KSB Pump Ltd. Rate)
1
15205
15205
S/F of 1.5 H.P. submersible motor controlled starter pannel all complete. Crompton make. (I.S.I. Mark only) (Quotation Rate, KSB Make)
1
2550
2550
S/F of 25 mm. gate valve all complete. Approved Make. (Jal Nigam Rate)
1
464
464
S/F 4 sqmm. 3 core copper cable all complete. (Jal Nigam Rate)
80
4480
56
S/L of 40 mm. dia. Red screen ASHIRBAD PVC pipe all complete. (Jal Nigam Rate)
60
10080
168
S/F of M.S. clamp made with 65x6mm x600mm long M.S. strip suitable for 110 mm. dia. PVC pipe for holding all complete.(Jal Nigam Rate)
1
200
200
S/F of 10 mm. nylon rope for pump support all complete required for proper completion of work. (Market Rate)
60
1050
17.5
Class-1500 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of E/Ic. (S.I.No.305 / 2017-18)
2
11300
5650
12mm thick Cement plaster in single coat of fair side of single of half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm. In girth and finished even and smooth No. extra for mixing any additive. 1 cement : 4 fine sand (Not Less than in 1.25FM). (CH-13 S.I. No. 13.4.1 SOR 2023-24)
5
1000
200
20 mm. nominal outer dia. pipes. (Ch.-23, S.I. No. 9 B PWD Specification No. 18.9.2 / 2019-20)
4
620
155
40 mm. nominal outer dia. pipes. (Ch.- 23, S.I. No. 9 (E) PWD Specification No. 18.9.5 / 2019-20)
5
1600
320
C.I. cover with frame 110mm. Internal dia. & MS clamp for 40 mm. dia. pipe. (S.I. No. 68 PWD SOR 2019-20) (ISI mark only)
4
240
60
S/F of 20mm size C.I. bib cock with brass rod heavy quality complete. (UP PWD SOR 2019-20) S.I. No. 75 (b) (ISI mark only)
1
85
85
Providing and laying cement concrete in 1:2:4 of not less than strength of M 150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E/Ic. (Ch.- 5, S.I. No. 6 / SOR 2019-20)
0.1
645
6450
Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. (SOR-2018 S.I. No. 1139A)
10
6250
625
Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. But in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit (SOR-2018 S.I. No. 131C)
35
22505
643
Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch and socket etc. complete in all
respect including matching colour wash. but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. (SOR-2018 S.I. No. 134C)
6
2010
335
Wiring point for fan / fesh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash. but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper Conductor cable as earthwire drawn inside the conduit. (SOR-2018 S.I. No. 133C)
14
9912
708
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. CAT- AAA (SOR-2018 S.I. No. 1423)
5
44250
8850
Supply, receiving, storing, handling, assembling in position the following accessories as described below complete with all accessories, control gear as requred etc. (Mittal Associate file No-26/UPT/ADA/2017-18 Item No- Ex-46) Ceilling Mounted Fan (1200 MM) (QAR)
5
7220
1444
20 W LED Lamp (QAR)
34
9044
266
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Mittal Associate file No-26/UPT/ADA/2017-18 Item No-Ex-43) Single pole
14
2786
199
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( (Mittal Associate file No-26/UPT/ADA/2017-18 Item No-Ex-44) 40A
2
678
339
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (H/28/3) (j ) 25 sq. mm 3-1/2 core
68.75
27500
400
S & F surface/Flush mounting 4ways V TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT A (SOR-2018 S.I. No. 1026C)
1
8560
8560
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip
Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified (SOR-2018 S.I. No. 725C)
1
8070
8070
Taking connection for electricity as per direction given by E/I. Payment to contractor after giving actual estimate by TORRENT Power Ltd. ( L.S )
1
35000
35000
Providing and Fixing ACP Sheet in Facade work on Toll Plaza …………….All Complete. (Rate as per lowest market quotation)
90
451350
5015
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements