Agra Development Authority Tender

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work including cost of all materials, labour, T&P etc. required for proper completion work. (CH-15 S.I. No. 3 SOR 2023-24)

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (CH-12 S.I. No. 10 SOR 2023-24)

Supply and fixing of PVC panel.

Supply and fixing of Down light 15 to 18 watt. (Electrical SOR 2018 Item No. 1403)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : (CH-9 Item No. 8 SOR 2023-24) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per (Cost of aluminium snap beading shall be paid in basic item): (CH-9 Item No. 9 SOR 2023-24) (i) With float glass panes of 5.5 mm thickness

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (For thickness of tiles 10 mm to 25 mm) (CH-17 S.I. No. 13 SOR 2023-24)

Providing and laying Vitrified tiles in floor with lean concrete of 600x 600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. including preparation of 75mm thick base with concrete 1:4:8 complete as per E/I. (CH-14 S.L. No. 21 SOR 2023-24)

Providing and fixing PVC pipe conforming to IS make working pressure 6 Kg/SqCm incuding testing labour T&P and all complete fittings (CH-23 S.I. No. 30C SOR 2023-24) 110 mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. (CH-23 Item No. 2 SOR 2023-24) 25 mm nominal outer dia pipes

Providing and fixing of 6 lever mortice door lock (make godrej). LMR (Rate as per Lowest Quotation Taken by Div.)

Supply and fixing of Wall hung WC (European Type). (LMR) (Rate as per Lowest Quotation Taken by Div.)

Supply and fixing of wall fitted cistern. (LMR) (Rate as per Lowest Quotation Taken by Div.)

Supply and fixing of Wash basin with Pedestal stand. (LMR) (Rate as per Lowest Quotation Taken by Div.)

Supply and fixing of Bass angle valve. (LMR) (Rate as per Lowest Quotation Taken by Div.)

Supply and fixing of Bib cock. (LMR) (Rate as per Lowest Quotation Taken by Div.)

Supply and fixing of Long nose bib cock. (LMR) (Rate as per Lowest Quotation Taken by Div.)

Supply and fixing of Health faucet. (LMR) (Rate as per Lowest Quotation Taken by Div.)

Supply and fixing of PVC connection. (LMR) (Rate as per Lowest Quotation Taken by Div.)

Supply and fixing of Waste pipe. (AR) (Rate as per Lowest Quotation Taken by Div.)

Supply and fixing of Soap disk. (AR) (Rate as per Lowest Quotation Taken by Div.)

Providing and fixing of Towel Rail (Make Jaquar) (A.R.) (Rate as per Lowest Quotation Taken by Div.)