Agra Development Authority Tender

2 Channel Audio Interface Hybrid FireWire and USB Audio Interface with software license. Make- Motu/ Behringer/ M Audio.

3 Chip DLP Laser Projector, Minimum 35000 Lumens Brightness, Resolution: WUXGA (1920x1200) or more, Contrast Ratio: 20000:1 or more, Brightness Uniformity: 92% or more, Inputs: HDMI 2.0, HDBaseT, DVI D. Max Pixel Clock: 580 MHz or more, Illumination Lifetime: 20000 hrs or more. Should be supplied with suitable long throw Lens Make: Barco/ panasonic/DP.

Projector enclosure- intelligent outdoor projector enclosure for seamless projection and health management of projector, Featuring lightweight aluminium welded construction, its powerful AC fan provides efficient cooling, while its salt fog filtering and positive pressure option provides ultimate projector protection, anti-reflecting glass having 94% transparency for seamless and uninterrupted projection, Hydrophobic filter to avoid dust particles go inside, Outer Body 3 mm AL sheet Platform of AL fabrication for Projector mount with thickness of 5 mm Telescopic Channel load carrying capacity 125 Kg with length 36’’ Both side openable Enclosure provision with rubber lining SS latch locks Both side Hydrophobic Air Filters Extra clear Tempered Glass window thickness 6mm Entire Unit powder coated paint Ball bearing High Power AC Fans 150 CFM (Dia 6”) Inlet & Outlet Heater arranged both side (100 Watts 2 Nos) Gas & Oil filled Damper Provision for easy opening of doors Epoxy Primer 2 Coat paint Stand made (Aspa Paint) of MS tube size 65x25 thickness 2 mm with plate (10mm) for mounting and SS fasteners for Till and PAN arrangement. Power sockets 16/6 Amps Make: DMI/ AES/ SPM/ Banso.

Remote Disply Monitoring and controller to check Humidity and temperature inside projector enclosure. View current status information. Humidity – relative humidity in % Temperature in in degrees C. Humidity controller 1 set Point, Temp. Controller 3 Set Point, Relay 10 Amp. (Heavy duty) For Fan, Heater, Relay / Contactor 15 Amp. (Heavy duty) For Projector, 10. Humidity + Temp. Transmitter (Sensor) (0 – 95% & 0 -70 °C) Make: DMI/ AES/ SPM.

Media Server- Intel Core i7 Series Processor or above with following minimum specifications: 16 GB RAM system memory, Minimum 256GB storage, Dedicated 8 GB Graphic card, USB 3.0 interface with USB ports, Wireless key board, Wireless mouse with licensed loaded Window 8/10, LAN, Audio Jack, VGA port, Line in - Line out and Video Output DVI,HDMI etc. Make: Asus/ Dell/ HP.

Supply installation testing and commissioning of Lighting Control software complete with necessary software and hardware interface, license as required. Make: As per OEM standard.

Multi display playback software solution with license. Real Time rendering effects, blend, mix, cut and edit, Visuals plugins, edge blending and projection mapping capabilities Make: Resolume/ Dataton/ Madmapper.

24 inches Flat LCD Display Monitors with Optimal Resolution of 1920 x 1080 at 60 Hz having Brightness 250 cd/m² (typical). CONNECTIVITY 1 Digital Visual Interface connectors (DVI-D) with HDCP 1 Video Graphics Array (VGA) 1 USB 2.0 upstream port 2 USB 2.0 Make: Asus/ Dell HP.

Supply, installation testing and commissioning of 10 KVA, true on-line UPS 3 Ph double Conversion with all safeties and protection and suitable capacity sealed maintenance free 12 V batteries, with a 15-20 mins backup time on full load with MS open MS Battery rack and Nyvin cable. Make: Eaton/ Emerson/ Vertiv.

8 Port Network Switch, Switching Capacity 16 Gbps, Max. Packet Forwarding Rate 11.9 Mpps, MTBF 1,061,267 hours Power Input AC：100 ~ 240 V Flash Memory Size 64KByte Packet Buffer Size 192KBytes, 1000Base-T Interface x 8 Make: Dlink/ Cisco/ Netgear.

HDMI to HDMI cable supports signals up to 4K x 2K Video and more color spare, 15.2 Gbps DTR, 10MΩ minimum Insulation resistance, -25 to 80 degree Celsius Working Temperatre length as per requirement. Make: Steaker/ Manhatton/ eqivalent

B- Content Creation: 12-15 mins Script writing, Audio Visual Content: includes visual Storyboard, Storytelling, animations, Graphics, Art Works, Archival Imagery, Video-timeline, SFx, VFx, Voiceovers and Music.

Creative Direction, Light Design and Programming: Designing of light schemes according to script, characters, events, mood, drama etc and creating timeline sync with the audio video storyline.

Audio Design and Distribution: Distribution of layers of music track and VO as per Audio distribution system.

Edge Blending and Projector Mapping: Alignment of projector for edge blending using cutting edge technology, Distribution of layers, creating timeline sync with the video storyline, Control System etc and as per requirement.

C- Supply Installation Testing and Commissioning of Lighting. SITC of Outdoor featured customised "Mashaal" Post top light with FRP housing & pole, in the Stone texture embedded with light. Luminaire Wattage 40-60W, Well designed thermal management system with aluminium heat sink Operating Voltage of AC 165-270V 50HZ with universal elcectronic driver, Light colour should be iny range of 2700-4000K, Mean rated service life L70(tq 25 °C) = 50,000 h.Ingress protection rating (DIN EN 60529): IP65,The luminaire should be provided with Electrical safety class I. Operating Temperature 0 deg to +50 deg The work also includes all the accessories, foundation, connections in main LT panel box and of all wires, cable, earthing and MCCB/MCBs. The final design will be approved as per Engineer-in-Charge.Make: Phillips/eveready/unicor.

SITC of high quality long throw DMX controlled RGBW wash light, Protection Rating : IP66 & IK08, complying to BIS standard IS . Mounting Structure : Additional wall mount yoke arrangements for fixing the lights. Rotation view : Inbuilt body rotating angle in degrees for uniform rotation angle to get the desired effect. Power consumption : 70-80W (max), CCT : Tunable, (as per the design approval) Beam Angle - as per site requirement, Control : Manual/ON/OFF, Body : Die casted / extruded aluminium, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : AC 110-230V, 50Hz . Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement) Glare : Specially designed glare free round shape 360 deg / 3 unit. Focussing area/LED will be kept 90 Deg perpendicular below the glare free optic. Size of the LED optic & glare unit must be equal or +/-2% higher to achieve the maximum intensity and less glare. This additional arrangement can be fixed or removed on the application. Glare free optical design for human viewing angle from a distance within 2-3 Mtr. Toughened transparent glass sealed above the glare free unit. Painting : 7 tank processed chemical treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C , lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total protection class of IP 66 & IK08 . Luminaire is inclusive of Integral male/female waterproof connectors , driver, accessories for fixing ( nut , bolt , clamps etc ) with structures in pre wired conditions as per IS. The work also includes all the accessories , connections in main LT panel box and of all wires, cable, earthing and MCCB/MCBs as per Engineer-in-Charge with proper metal cages for lights protections. DMX Controlled LED Floodlight Luminaire 75W (DSR & AOR (E&M) ITEMS FOR FAÇADE LIGHTING / 1.8/ Pg1) Make: Phillips/eveready/unicor

SITC of high quality long throw DMX controlled RGBW linear wash light, Protection Rating : IP65, complying to BIS standard, Mounting Structure : Additional wall mount yoke arrangements for fixing the lights. Rotation view : Inbuilt body rotating angle in degrees for uniform rotation angle to get the desired effect. Power consumption : 40-50W (max), CCT : Tunable, (as per the design approval) Beam Angle - as per site requirement, Control : Manual/ON/OFF, Body : Die casted / extruded aluminium, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : AC 110-230V, 50Hz , Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement) Glare : Specially designed glare free round shape 360 deg / 3 unit. Focussing area/LED will be kept 90 Deg perpendicular below the glare free optic. Size of the LED optic & glare unit must be equal or +/-2% higher to achieve the maximum intensity and less glare. This additional arrangement can be fixed or removed on the application. Glare free optical design for human viewing angle from a distance within 2-3 Mtr. Toughened transparent glass sealed above the glare free unit. Painting : 7 tank processed chemical treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C , lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total protection class of IP 66 & IK08. Luminaire is inclusive of Integral male/female waterproof connectors , driver, accessories for fixing ( nut , bolt , clamps etc ) with structures in pre wired conditions as per IS.LED Driver, IP65 or higher, IK05 or higher etc. The work also includes all the accessories , connections in main LT panel box and of all wires, cable, earthing and MCCB/MCBs as per Engineer-in-Charge with proper metal cages for lights protections. DMX Controlled LED Linear Wallwasher light 40W (DSR & AOR (E&M) ITEMS FOR FAÇADE LIGHTING / 1.10/ Pg1) Make: Phillips/eveready/unicor

Stand Alone DMX controller with Zone management and 16-bit channel management. RDM Enabled. Extensive external triggering operations via Dry Contact ports, TCP/UDP along with Calendar Triggers. Ethernet Integration. IOS/Android APP based wireless control. 1024 DMX channel control with an option to get a paid upgrade to 2048 channels. DC5-5.5V Input via external adaptor. Up to 32BG memory. Using light show authoring software to select from standard 10 effects, adjust effect settings such as color, speed, and brightness. Make: Phillips/eveready/unicor

DMX converter with 3 and 5 pin XLR points for programming of lights ,Make: Phillips/Unicor.

DMX Splitter- The DMX-512 splitter shall have minimum one DMX input and six DMX output connections, the sockets being standard 5-pin AXR connectors. The opto isolated DMX-512 splitter shall have a power on LED and DMX active LED indication on the front panel. The opto isolated DMX-512 splitter input shall be internally terminated. Make: Phillips/Eveready/unicor.

Moving Head with Rated power: 200-300W@220V, Light angle: 2 °, Input voltage: AC100-250V 50/60Hz Light source specifications: 200W high CRI lamp, Colour temperature: 8000K, Colour plate: a colour wheel, 13 is colour + white, half color effect & DMX Control. Make: Phillips/Eveready/unicor.

Weather proof dome housing for beam lights of suitable size with heat dissipation unit and acrylic covering to pass the beam. Make: Phillips/Eveready/unicor.

D - Electrical Items. DMX Cable 18 AWG 18/0.20 mm x 2 Core ATC copper conductor PE insulated, core twisted in a circular form inner sheathed with moisture proof polymer, beard shieleded (80% with ATC Copper, outter jacket with matt finished PVC. Make: Krystal/ Beldon/ equivalent

CAT 6/5e Shielded Twisted Pair cable for signal & data transmission. 24 AWG twisted pair conductors inside an overall braid and foil shield. Shielded Twisted Pair cable should provides added protection from outside interference and ensures high quality signal transmission Make/ Dlink/ Beldon/equivalent .

2 Core x 4 sq. mm. (copper) Speaker Cable Make: Krystal/ Kramer/ Beldon.

3 Core x 1.5 sq.mm Copper Cable FRLS Make: Polycap/ Havells/ Finolex.

3 Core x 2.5 sq. mm Copper Cable FRLS Make: Polycap/ Havells/ Finolex.

3 Core x 6 sq. mm Copper Cable FRLS Make: Polycap/ Havells/ Finolex.

SITC of customised waterproof power junction box /power cable terminal box, IP65 made up of rugged, non-corrosive, high impact polycarbonate, moulded nylon encases connectors that use screw compression to secure the wires, protection against water jets and dust from all directions, with bus bar and MCB 10A.

SITC of DC power driver for the above Lights, Power : 200W, Input : AC 110-240V AC, 50Hz, Output : DC 12/24V, Protection rating, IP65, Surge protection : LL 4KV, LE 6KV.

SITC of MS Fabricated IP 65 driver Box having IP67 glands for incoming and outgoing power connections as per the project requirement. Wall mounting arrangements with the clamps. Easy of driver mounting, termination having fixing arrangements and door with rubber gasket & locking system.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth.

Designing/Supply/Fixing and intallation of MS made Stand/ structure for projectors,with suitable MS base plate of 8 mm , clamps, grouting material, painting and other accessories.The rate is including the cost of foundation.

Installation, programming & Commissioning of the Illumination system in the non-intrusive manner. This shall include Scaffolding/ mounting arrangements & all the necessary accessories required for connections & installations viz. cables/ junctions boxes, connectors etc.

E - Operation & Maintenance charges Operation & Maintenance charges for 1st year.

Operation & Maintenance charges for 2nd year.

Operation & Maintenance charges for 3rd year.

Operation & Maintenance charges for 4th year.