Urban Development Department Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Costs
EMD
₹ 4,27,537Document Cost
₹ 8,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_SEU_36788_1Bid Award Id
ViewTender No
07/EE-IV/UDD/EW/2022-23Tender Authority
Urban Development Department ViewPurchaser Address
-Website
http://tripuratenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift
upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-All kinds of soil
1539.38
260925
169.5
Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers notexceeding 20cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and liftupto 1.5 m.-All kinds of soil
769.48
92568
120.3
Extra for additional lift of 1.5m or part thereof
-All kinds of soil
256.65
12781
49.8
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to
required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable
method complete.
200
177500
887.5
Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading to
required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable
method complete.
-
-
-
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone
aggregate 20 mm nominal size)
15
156849
10456.6
1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone
aggregate 20 mm nominal size)
37.96
374774
9872.1
1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone
aggregate 40 mm nominal size)
72.83
679103
9324.5
Providing and laying cement concrete in retaining walls, return walls (any thick-ness) including attached pilasters, columns, piers, abutmets, pillars,posts, struts, buttresses, string or lacing courses,parapets, coping bed blocks, anchor blocks, plain
window sills, fillets, sunken floor etc. upto floor five level, excluding the cost of centring shuttering and
finishing
-
-
-
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stoneaggregate 20 mm nominal size)
3
34972
11657.6
Centering shuttering including struttings, propping etc. and removal of form work for Foundations, footings, bases for columns.
132.34
31576
238.6
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification
10100
621150
61.5
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine
sand including finishing the top smooth.
40.62
32918
810.5
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
-
-
-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
260
2853396
10974.6
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing
and reinforcement-
-
-
-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
0.27
3183
11791.9
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing
and reinforcement-
-
-
-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size)
100.59
1217541
12104
Centering shuttering including struttings, propping etc. and removal of form work for:
5.8.1.1 Foundations, footings, bases for columns etc. for mass concrete with timber plank
-
-
-
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
689.11
254970
370
Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
599.34
323046
539
Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
1089.4
419636
385.2
Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
577.09
278732
483
Stairs (excluding landings) except spiral-staircases with wooden plank
24.5
11706
477.8
Weather shade, Chajjas, corbels etc., including edges.
37.86
15814
417.7
Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings,
bed plates, anchor blocks and the like.
58.5
26342
450.3
Providing precast cement concrete Jali 1:2:4 (1 cement:2 coarse sand : 4 graded stone aggregate 6mm nominal
size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening
cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits
50 mm thick
5.29
6000
1134.4
Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete above plinth level.
Mild steel and Medium Tensile steel bars.
294
22902
77.9
Thermo-Mechanically Treated bars of grade Fe-500D or more
65000
5083000
78.2
Smooth finishing of the exposed surface of R.C.C. work with 6mm thick cement mortar 1:3 (1 Cement: 3 fine
sand)
60.3
11420
189.4
First class brick work in foundation and plinth
including cost of all materials as required complete:-
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
113.98
1013108
8888.4
In cement mortar 1:6 ( 1 cement : 6 fine sand ).
20
172482
8624.1
First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
1.75
17708
10136.4
In cement mortar 1:6 ( 1 cement : 6 fine sand ).
8.29
81736
9859.7
Extra for brick masonry work in triangular, square and rectangular pillars including cost of all materials as required complete.
0.75
314
419.1
Extra for brick masonry work in circular pillars including cost of all materials as required complete.
0.38
284
749
Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
32.25
38313
1187.9
Half brick masonry work with first class bricks insuperstructure upto floor five level including cost of all materials as required complete:-
848.92
1157160
1363.1
1st class brick masonry work 75mm thick in superstructure upto floor five level including cost of all materials as required complete:-
-
-
-
In cement mortar 1:3 ( 1 cement : 3 fine sand ).
47.66
41821
877.5
Extra for providing & placing in position 2 nos 6mm dia MS bars at every 6th course of full brick masonry work including anchorage in joints of 75mm in each
side in superstructure for all level including cost of all materials as required complete:-
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
5
2938
587.6
In cement mortar 1:6 ( 1 cement : 6 fine sand ).
8.29
4286
517.1
Extra for providing & placing in position 2 nos 6mm dia MS bars at every 4th course of half brick masonry work including anchorage in joints of 75mm in each
side in superstructure for all level including cost of all materials as required complete:-
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
699.8
138140
197.4
Extra for providing & placing in position 2 nos 6mm dia reinforcement at every 3rd course of 75mm thick brick masonry work including anchorage in joints of
75mm in each side in superstructure for all level including cost of all materials as required complete:-
-
-
-
In cement mortar 1:3 ( 1 cement : 3 fine sand ).
47.66
10604
222.5
Honey comb brick masonry work of half brick thickness with first class bricks in superstructure for all level including cost of all materials as required
complete:-
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
16
15396
962.3
Marble work gang saw cut (polished and machine cut) of approved thickness for wall lining(veneer work), backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 fine sand) including pointing with white cementmortar 1:2 (1 white cement : 2 marble dust)with an admixture of pigment to match the marble shade: (to be secured to the backing by means of cramps, which shall be paid forseparately), including rubbing, curing etc. complete at all levels as required:-
-
-
-
18 mm thick Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble or equivalent duly approved:-Area of slab over 0.50 sqm.
8.93
30031
3363
Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finishetc. complete at all levels as required as per design approved by the Engineer-in-charge:-
-
-
-
18 mm Marble work.
32
5123
160.1
Mirror polishing on marble work/granite work
/stone work wherever, required to give high gloss finish complete at all levels as required as per direction of the Engineer-in-Charge
24
5416
225.7
Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position :
Karai wood
0.99
91527
92079.7
Providing and fixing panelled / or panelled andglazed shutters for doors, windows and clerestorywindows including ISI marked bright finished /black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, whichwill be paid for separately but including the woodenbeading of 20 × 12 mm for fixing panelling and orglazing as per direction of Engineer-In-Charge
-
-
-
30 mm thick shutters
9.07
17019
1876.5
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion insidegrooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mmthick
1.68
2994
1782.6
Providing and fixing glazed shutters for doors,windows and clerestory windows using 4 mm thick float glass (weight not less than 10ks/Sqm) panes including black enamelled ISI marked MS butt hinges
with necessary screws.
2.1
5542
2639.2
Providing and fixing 25 mm thick shutters for cupboards etc. including ISl marked black enamelled M.S. butt hinges with necessary screws :
Gamair Wood
18
43241
2402.3
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
48.22
144990
3007.1
Extra for cutting rebate in flush door shutters (Totalarea of the shutter to be measured).
48.22
4961
102.9
Providing and fixing teak wood lipping of size 25x3
48.22
3148
65.3
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete
-
-
-
25 mm dia
5.9
3080
522.2
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets:
-
-
-
25 mm dia (heavy type)
40.93
4813
117.6
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.
Fixed to openings /wooden frames with rawl plugs
1053.33
133140
126.4
Providing and fixing hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62 x 19 mm beading of Gamair wood.
2.25
2622
1165.4
Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement :3 fine sand:6graded stone aggregate 20 mm nominal size
144
23385
162.4
Providing and fixing IS : 1341 marked M.S. Heavy weight butt hinges with necessary screws etc. complete
-
-
-
125 × 90 × 4.00 mm:
25
1340
53.6
Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc. complete
-
-
-
300×16 mm
25
5000
200
250 x 16 mm
4
778
194.6
Providing and fixing ISI marked oxidised M.S. Tower bolt black finish, (Barrel type) with necessary screwsetc. complete :
-
-
-
250x10 mm
50
3640
72.8
200 x 10 mm
4
264
66
Providing and fixing ISI marked oxidised M.S. Door latches conforming to IS:5930 with screws etc. complete :
-
-
-
250 x 20 x 6 mm
14
1030
73.6
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
-
-
-
125 mm
50
1725
34.5
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers including necessary screws etc. complete (best make
of approved quality):
50 mm
4
892
223.2
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws
(best make of approved quality)
4
242
60.6
Providing and fixing bright finished brass handles with screws etc. complete :125 mm
20
4300
215
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.
complete.
9
1004
111.6
Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc.
complete.
9
9234
1026
Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of :Size 50 mm
2
410
205.4
Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete.
2
154
77
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
300x16 mm
2
519
259.9
250x16 mm
2
451
225.7
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
250x10 mm
20
2098
104.9
200x10 mm
20
1906
95.3
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary
screws etc. complete.Single rubber stopper
4
148
37.2
Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod
20
2742
137.1
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm,made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame .
The door frame to be fixed to the wall usuing MS screws of 65/100 mm size complete as per manufacturers' specification and direction of
Engineer-In-Charge.
59.52
25456
427.7
Providing and fixing to existing door frames thick factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm forstiles, top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC‘C channel of size 30mm thickness, 110mm width out of which 90mm shall be flat and 20mm shall betapered in 45 degree angle on either side forming stiles; and 5mm thick, 110mm wide PVC sheet out ofwhich 90mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 130mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mmwide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional Sqm ₹ 2,765.30 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-incharge,manufacture’s specification & drawing.
27.59
76294
2765.3
Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in-Charge With non decorative veneering on both sides
9
13539
1504.4
Providing structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required.
356.08
29305
82.3
Providing and fixing in position collapsible steel shutterswith vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm sizewith top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts,locking arrangement, stoppers, handles, hold fast/anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required.
9.5
55442
5836
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes
1
122
122.9
Providing and fixing fan clamp type –I of 16mm dia MS bar bend to shape with hooked ends in RCC slabs during laying including painting the exposed portion of loop, all as per standard design complete
26
3801
146.2
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm,73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of3.3mm dia. round headed screws, one lock at thec orners. Clamp shall be made of 12mm dia M.S. bar bent to shape, including painting the exposed portion as per standard drawing complete as required (providedincase of low ceiling height).
58
9129
157.4
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-
-
-
-
In stringers, treads, landing etc. of stair cases including useof chequered plate wherever required, all complete.
41.1
3926
95.54
In grating, frames, guard bar, railing, brackets, gates and similar works, all complete.
922.8
105014
113.8
Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:-
M.S. tube
447.23
54293
121.4
Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design
1
76
76.5
Providing and fixing MS bolts including nuts and washers complete as per standard design:-
-
-
-
Upto 300mm length.
1
107
107
Above 300mm length
1
111
111.3
Welding by gas or electric plant including transportion of plant at site etc. complete as per standard design.
936
2714
2.9
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all
complete with : 4.0 mm thick glass panes
42.64
35770
838.9
Providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty, in steel doors, windows, ventilators and composite units.
134.12
5981
44.6
Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate) flooring finished
with a floating coat of neat cement including cementslurry, rounding of edges and strips etc. complete.
237.5
131622
554.2
Extra for making chequers of approved pattern in Cement Concrete floors, steps, landing, pavements etc.
complete.
1.12
40
36
Providing and laying cement plaster skirting upto 300 mm height with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) finished with a floating coat of neat cement including rounding of junctions etc. complete. 18 mm thick
315.06
111027
352.4
Providing and fixing precast chequered cement concrete tiles 22 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-in-Charge. In dark shade using ordinary cement
15.1
12427
823.3
Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) ofapproved make in all colours, shades of any size as
approved by Engineer-in-charge in skirting, risers ofsteps and dados, laid over 12 mm thick bed of cement
mortar 1 : 3 (1 cement : 3 fine sand) jointed withordinary cement slurry including pointing with white
cement mixed with pigment of matching shade complete.
208.46
165100
792
Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approvedmake in colours such as White, Ivory, Grey, Fume Red
Brown, laid over 20 mm thick cement mortar 1:4 (1cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. Ceramic Tiles 1st quality 300 x 300mm in all shades and
designs
43.97
34053
774.4
Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarsesand at 60 cudm per 10 sqm, including cleaning the slabsurface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete :With residual type petroleum bitumen of grade VG -10
376.07
48625
129.3
Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately):
12 mm thick natural colour insulating board
8
4685
585.7
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382
leaving 10 mm gap for thermal expansion:
-
-
-
Single socketed pipe - 75 mm OD
30
4749
158.3
Single socketed pipe - 110 mm OD
30
8055
268.5
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type-A including jointing with seal ring conforming to IS :
5382 leaving 10 mm gap for thermal expansion:
-
-
-
Coupler 75 mm
65
4699
72.3
110 mm
10
1236
123.6
Single pushfit Coupler
75 mm
1
72
72.3
110 mm
20
2286
114.3
Single equal tee without door
75x75x75 mm
5
693
138.6
110x110x110mm
5
1121
224.24
Bend 87.5° 75mm
20
1552
77.6
110mm
30
4227
140.9
Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete.
-
-
-
75mm
20
1696
84.8
100mm
20
1944
97.2
12 mm cement plaster of mix
-
-
-
Cement mortar 1:4 (1 cement : 4 fine sand)
854.53
149371
174.8
Cement mortar 1:6 (1 cement : 6 fine sand)
1251.7
199770
159.6
15 mm cement plaster on the rough side of single or half brick wall of mix:
-
-
-
Cement mortar 1:4 (1 cement : 4 fine sand)
668.35
135942
203.4
Cement mortar 1:6 (1 cement : 6 fine sand)
50.31
9322
185.3
6 mm cement plaster of mix :
-
-
-
Cement mortar 1:3 (1 cement : 3 fine sand)
693.28
100178
144.5
Cement mortar 1:4 (1 cement : 4 fine sand)
30
4107
136.9
Neat cement punning
515.03
23227
45.1
6 mm cement plaster in single layer finished with a floating coat of neat cement, curing and a thick coat of lime wash on top when dry on wall bearings for RCC slabs and beams complete.
-
-
-
Cement mortar 1:3 (1 cement : 3 fine sand)
1
194
194.4
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
300
17070
56.9
Extra for plastering on circular work not exceeding 6 m in radius complete.In one coat
0.74
14
20.1
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
1
1262
1262
Colour washing such as green, blue or buff with whiting to give an even shade:
-
-
-
New work (two or more coats) with a base coat of whiting
864.2
20049
23.2
Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. [Payment shall be
made after submission of Test Certificate issued by the
Manufacturer]
1803.79
132758
73.6
Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface
complete.
1258.45
47191
37.5
Finishing walls with water proofing cement paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
-
-
-
New work ( two or more coats applied @ 3.84 kg/10 sqm)
1472.52
90559
61.5
Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
-
-
-
With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ).
124.74
4727
37.9
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised
iron/ steel works
144.76
4588
31.7
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat )
144.76
2518
17.4
Finishing with Epoxy paint ( two or more coats) of approved brand and manufacture at all locationsprepared and applied as per manufacturer's specification including appropriate priming coat,preparation of surface etc. complete [Payment shall bemade after submission of Test Certificate issued by theManufacturer
-
-
-
On steel work
12.6
1648
130.8
On concrete work
66
8718
132.1
Painting on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint ( two or more coats) of required colour of approved brand and manufacture
to give an even shade on new work over and including a priming coat of approved steel primer complete
-
-
-
100mm. dia.
19
803
42.3
150mm. dia.
19
1197
63
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall
be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work
33
2732
82.8
Lettering with black Japan paint of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer].
90
252
2.8
Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge.(Glazing and paneling and dashfasteners to be paid for separately) :-
-
-
-
For fixed portion of approved quality:-Anodised aluminium (anodised transparent or dyed to
required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
244.06
97672
400.2
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required (
Fittings shall be paid for separately ):
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
183.79
86675
471.6
Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-
-
-
-
With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )
55.51
58740
1058.2
Filling the gap in between aluminium frame and adjacent RCC/brick work by providing weather silicon sealantover backer rod of approved quality etc. complete as per architectural drawing and direction of the Engineer-in charge:- (i) Upto 5 mm depth and 5 mm width.
99
10454
105.6
Providing and fixing stainless steel ( SS 304 grade ) adjustable friction window stay of approved quality with
necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-incharge
-
-
-
255 x 19 mm
96
31766
330.9
355 x 19 mm.
96
38352
399.5
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with
necessary screws etc. of approved quality complete as per direction of Engineer-in-charge:-
-
-
-
Anodised aluminium of grade AC 15 ).
48
3240
67.5
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved
quality complete as per direction of Engineer-in-charge:-
-
-
-
Anodised aluminium of grade AC 15 ).
16
1438
89.9
Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with :Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
17.14
180928
10554.1
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern withmanually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete
including cutting and making good the walls and floors wherever required :
-
-
-
White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests
4
18539
4634.9
Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixturescomplete including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
4
17593
4398.3
Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 40x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
2
7542
3771.1
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of
standard pattern, including painting of fittings andbrackets, cutting and making good the walls wherever required:
10
30706
3070.6
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
4
5010
1252.7
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste
complete, including painting the fittings and brackets,cutting and making good the walls wherever required :
-
-
-
White glazed fire clay kitchen sink of size 600x450x250
mm.
2
5917
2958.5
Providing and fixing a pair of white vitreous china footrests of standard pattern for squatting pan water closet:
-
-
-
250x125x25 mm
2
324
162
Providing and fixing 100 mm sand cast Iron grating for gully trap.
4
264
66.1
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
10
8341
834.1
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete
fixed with 40 mm long screws, rawl plugs etc., complete.
12
5820
485
Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion:
-
-
-
Single socketed pipe - 75 mm OD
50
7915
158.3
Single socketed pipe - 110 mm OD
30
8055
268.5
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4
graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.
-
-
-
For 75 mm dia. Pipe
18
3488
193.8
For 100 mm dia. Pipe
13
2557
196.7
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water, soil, waste & vent pipes pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion:
-
-
-
Coupler 75 mm
29
2096
72.3
110 mm
29
3584
123.6
Single pushfit Coupler 75 mm
20
1446
72.3
110 mm
20
2286
114.3
Single equal tee without door 75x75x75 mm
20
2772
138.6
110x110x110mm
15
3366
224.4
Single equal tee with door 75x75x75 mm
20
2976
148.8
110x110x110mm
20
4624
231.2
Bend 87.5° 75mm
20
1552
77.6
110 mm
10
1409
140.9
Plain shoe 75mm
5
381
76.3
110 mm
5
590
118
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good
the walls and floors:
-
-
-
100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989.
4
4593
1148.3
100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS: 3989.
2
2380
1190
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron
pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone
aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand):
-
-
-
100mmdia.
8
2703
337.9
75mmdia.
6
1558
259.7
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of
standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms.
14
3113
222.4
600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms
6
3147
524.5
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6mm, one bolts on each side of the pipe.
-
-
-
Total bracket length 580mm of approved shape and design (for single 100mm dia pipes)
50
10570
211.4
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water,soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws ofrequired length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand)
making good the wall etc. complete
-
-
-
75 mm
20
3756
187.8
110 mm
10
1905
190.5
Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.
Internal work - Exposed on wall.
-
-
-
15 mm dia. nominal bore
60
13728
228.8
20 mm dia. nominal bore
60
16896
281.6
25 mm dia. nominal bore
60
22176
369.6
40 mm dia. nominal bore
80
43384
542.3
Making connection of G.I. distribution branch with G.I. main following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
25 to 40 mm nominal bore
27
11812
437.5
Providing and fixing brass bib cock of approved quality :
-
-
-
15 mm nominal bore
24
7180
299.2
Providing and fixing brass stop cock of approved quality :
-
-
-
15 mm nominal bore
20
5984
299.2
Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats
complete :
-
-
-
25 mm nominal bore
7
4092
584.6
Providing and fixing gun metal non-return valve of approved quality (screwed end):
-
-
-
32 mm nominal bore Horizontal
2
1252
626.3
Vertical
2
1489
744.6
40 mm nominal bore Horizontal
2
1558
779.4
Vertical
2
1976
988.2
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :
-
-
-
15 mm nominal bore
2
455
227.7
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length
-
-
-
15 mm nominal bore
10
961
96.1
20 mm nominal bore
5
627
125.4
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:
-
-
-
100 mm diameter
4
445
111.3
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work
-
-
-
15 mm diameter pipe
60
564
9.4
20 mm diameter pipe
60
642
10.7
25 mm diameter pipe
103
1462
14.2
40 mm diameter pipe
40
848
21.2
Boring with 100 mm diameter casing pipe for hand pump/ tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested :
-
-
-
Beyond 12 m and upto 19 m depth.
90
55620
618
Providing and placing in position filters of 40 mm diameter G.I. pipe of medim class as per IS : 1239 with latest amendment with brass strainer of approved quality.
9
5908
656.5
Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well.
19
7470
393.2
Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe
complete with all accessories.
1
1272
1272.2
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete as per CPWD specification and direction of the Engineer - in - charge.(New work)
-
-
-
25 mm nominal bore
6
1426
237.7
40 mm nominal bore
8
2894
361.8
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
5000
50000
10
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15 mm nominal bore
8
4387
548.4
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
8
500
62.6
Providing and fixing PTMT pillar cock of approved quality and colour .
-
-
-
15mm nominal bore, 107mm long, weighing not less than 110 grams.
8
1503
187.9
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular type.100 mm nominal dia.
8
267
33.4
Providing and fixing unplastisised P.V.C. Connection pipe with PTMT Nuts of approved quality and colour.
-
-
-
15 mm nominal bore with 30cm length.
8
556
69.6
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
-
-
-
25 mm nominal bore. Weighing not less than 62 gms.
10
585
58.5
Cutting holes upto 30x30 cm in walls including making good the same :
-
-
-
With 1st class bricks.
22
6701
304.6
Cutting holes upto 15x15 cm in R.C.C. floors androofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.
10
2459
245.9
Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface
after housing G.I. pipe etc.
30
4473
149.1
Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba.
20
5888
294.4
Supplying and fixing C.I. cover without frame for manholes :455 x 610 mm rectangular C.I. cover (light duty)the weight of the cover to be not less than
23 kg.
4
5441
1360.4
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar1:4 (1 cement : 4 fine sand) C.I. cover withframe (light duty) 455x610 mm internal
dimensions, total weight of cover with frameto be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size)foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone ggregate 40 mmnominal size), inside plastering 12 mm thick
with cement mortar 1:3 (1 cement: 3 fine sand)finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
3
22274
7424.9
Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete asper standard design.
1
7072
7072.8
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622 -
2017, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete
-
-
-
Soluble Salt Stainfree vitrified tiles (Size of tile 60x60 cm)
45
43177
959.5
Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622 -
2017, of approved make, in all colours & shade, laid over 20 mm thick of cement mortar 1:4 (1 cement: 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete
-
-
-
Soluble Salt Stainfree vitrified tiles (Size of tile 60x60 cm)
405
367092
906.4
Providing and fixing Marble stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand) jointed with ordinary cement slurry including pointingwith white cement mixed with of matching shade,
including rubbing and polishing complete.
-
-
-
18 mm thick Marble stone(Raj Nagar plain marble)
54.86
1042288
19000.1
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners , stainless steel bolts etc., of
required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
97.56
51968
532.7
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements