Tripura Urban Planning And Development Authority Tender

Design, Supply, Installation, Testing, and commissioning of the non-clog submersible pump sets having duty condition of 1.30 MLD with adequate head to reach the inlet chamber of the STP at the collection well with panel board mounted on the pedestal with proper earthing arrangement in Udaipur town –4 nos (2W+2SB)

Effluent Disposal Arrrangement for Ambassa Design and construction of 3.00 m diameter RCC collection well for required depth for storing the treated water of 1.30 MLD with proper arrangement for erection of non-clog submersible pump sets. The side wall shall be extended 1.50 m above the GL. Necessary girders with lifting arrangements are to be made to lift the pump set. Internal access ladders are to be provided including supply of all materials and labour complete. The cost includes soil testing for the assessment of soil bearing capacity and ground water table etc. The well shall be designed for the uplift pressure and external earth pressure as per IS 456. The cost includes earth work excavation in all type of soils, refilling sides, necessary barricading arrangement during construction, waterproof testing and removal of excess earth and disposing in a suitable location away from the site as per approved design, drawings and specification and as directed by the Engineer in charge

Design, Supply, Installation, Testing, and commissioning of the submersible pump sets having duty condition of 1.30 MLD with adequate head to reach the inlet chamber of the STP at the collection well with panel board mounted on the pedestal with proper earthing arrangement in Ambassa town – 2 Nos (1W+1 SB)

Design and Construction of STP of capacity 1.30 MLD with MBBR Technology of the following capacities , including design, drawing as per approval from appropriate authority etc. complete, as directed by engineer-in-charge including all Civil and Mechanical, electrical works of SSTP like Ramp for cesspool vehicle, Inlet Chamber, screen chamber, Primary settling tank, MBBR Reactor 2 Nos, Mechanical sludge dewatering unit with polymer dosing unit, Secondary settling Tank , manure yard, Internal water & sludge carrying pipes, pumps, valves, pits, electricity etc. all complete i/c civil, mechanical, electrical and instrumentation works, Electrical Sub-station, as per approved design, drawings and specification and as per the direction of Engineer in Charge. The Work shall be designed as per CPHEEO manual and as per the SBM – Urban 2.0 guidelines and executed as per approved design, drawings and specification and as per the direction of Engineer in Charge. The cost inlcudes other amenties mentioned below also. Design and develop the land proposed / approved for the construction of STP site and Design and construct MS Wire Mess Fencing work 1.50 m height with MS structural angle post at 2.50 m interval with 0.5 m masonry wall foundation including supply of materials and labor complete. Design and construction of 7.5 sqm Guard cum Operator’s room, construction of 18 sqm Administrative Building, construction of 9 sqm Store Cum go down, construction of 4.75 m wide CC interlocking paver block internal roads with 750 mm x 600 mm RCC box drains on both side of the roads including supply of all materials and labor complete. Design and construction of Tube Well with water purifier(Iron Removal Plant) including supply and installation submersible pump and supply of 2000 liters capacity PVC (4 Layers) water storage reservoir(To be placed at the roof of Administrative Building) with the supply and installation of HDPE /PVC pipelines for the supply of water to the STP and other Buildings, landscaping and Buildings, STP units and Yard lighting/illumination arrangements, as required as per the approved design, drawings and specification and direction of the Engineer in Charge.

Supply, Delivery of Cesspool Vehicle of capacity 1 KL as per the specification mentioned in the Technical specificatiion

Interception and Diversion works Design, Supply, delivery, laying, jointing, and testing of 315 mm HDPE PN 6 pipe gravity sewer main with proper slope to achieve self-cleaning velocity with necessary bedding arrangements as per CPHEEO Sewerage manual, design and construction of RCC Manholes of required sizes (Internal sizes depends on the depth of Invert level at each location of Manhole) at an interval of 50 m for cleaning purpose up to the final Interception point including supply of all materials and labour complete as per approved design, drawings and specification. The cost includes earth work in all type of soils, refilling and compaction including road restoration to the original position and removal of surplus earth, necessary barricading arrangement during construction for safety and dewatering arrangement etc complete as the approved drawing and specification and as directed by the Engineer in charge

Design, Supply at site, laying, testing to the required pressure and commissioning of DI K9 Pumping mains from Collection well (final interception point) up to the inlet chamber of the STP with proper bedding arrangement. The cost includes the earth work excavation, refilling charges and removal of surplus earth, necessary barricading arrangements during construction and dewatering arrangements etc complete as per approved design, drawings, and specification and as directed by the Engineer in charge. Supplying, laying, jointing, testing and commissioning 200 mm diameter DI K9 pumping main with necessary accessories, valves, valve chambers from collection well to Inlet chamber of STP in Ambassa

Effluent Disposal arrangment Design, supplying, laying, testing to the required pressure and commissioning of DI K9 pipes pumping main from treated water sump at STP site to the river with proper bedding arrangement. The cost includes the earth work excavation, refilling charges and removal of surplus earth, necessary barricading arrangements during construction and dewatering arrangements etc complete as per approved design, drawings, and specification and as directed by the Engineer in charge. Supplying, laying, jointing, testing and commissioning 200 mm diameter DI K9 pumping main with necessary accessories, valves, valve chambers from collection well to Inlet chamber of STP in Ambassa

Operation and Maintenance For Ambassa : O & O & M Fee for 5 year Operation Service Period for cleaning and maintaining for new STP 1.3 MLD conforming to the relevant Service Levels including all necessary tasks, activities and obligations as necessary for operations, maintenance and management of waste water and sludge drying system and all related infrastructure comprising of Ramp, inlet Chamber, screen chamber, Grit Chamber, Primary settling tank, MBBR Reactor 2 Nos, Mechanical sludge dewatering unit with polymer dosing unit, Secondary settling tank, manure yard, repair, sludge collection management, all commercial services including collection of the ULB’s revenue, customer services including recording and redressing customer complaints, including all administrative tasks, management tasks and all services to be provided as a prudent etc., as well as cost of management, wages, incentives, operations, maintenance, spares, administration, equipment, transport, taxes and levies, including all necessary preventive and reactive maintenance of all civil, mechanical, electrical and instrumentation units, administration, transport, communications, management information systems, reporting, including cost of all wages, chemicals, electricity*, consumables, administration, transport, spares, insurance, taxes levies etc., complete but excluding statutory payments. *Electricity: Bidders shall note the arrangements for pricing and payment of electricity charges will be borne by ULB's. The bidder shall separately provide the break-up of salaries and wages, consumables, electricity, preventive maintenance for civil, mechanical, electrical and instrumentation, insurance and all other costs in a separate sheet for analysis by Employer. i) 1st Year

ii) 2nd Year

iii) 3rd year

IV) 4th year

v) 5th year

For KHOWAI Interception and Diversion works for Khowai Design, Supply and Construction of RCC Interception Chamber of size 1 x 2 x1.50 m size for the Major identified waste water (Grey/ Blackish water) conveying drains in core areas with the provision of overflow gate for diverting rainwater during rainy season and wastewater diversion in to the gravity system including measuring the flow of sewage coming in the drain and size proposed shall be capabale to handle the flow in the drain (DBO item)

Design and construction of 3.00 m diameter RCC collection well for required depth for storing the wastewater of 1.30 MLD flow with proper arrangement for erection of non-clog submersible pump sets. The side wall shall be extended 1.50 m above the GL. Necessary girders with lifting arrangements are to be made to lift the pump set. Internal access ladders are to be provided including supply of all materials and labour complete. The cost includes soil testing for the assessment of soil bearing capacity and ground water table etc. The well shall be designed for the uplift pressure and external earth pressure as per IS 456. The cost includes earth work excavation in all type of soils, refilling sides, necessary barricading arrangement during construction, waterproof testing and removal of excess earth and disposing in a suitable location away from the site as per approved design, drawings and specification and as directed by the Engineer in charge (DBO Item)

Design, Supply, Installation, Testing, and commissioning of the non-clog submersible pump sets having duty condition of 1.30 MLD with adequate head to reach the inlet chamber of the STP at the collection well with panel board mounted on the pedestal with proper earthing arrangement in Khowai town – 6 Nos (3W+1 3SB) (DBO Item)

Effluent Disposal Arrrangement Design and construction of 3.00 m diameter RCC collection well for required depth for storing the treated water of 1.30 MLD with proper arrangement for erection of submersible pump sets. The side wall shall be extended 1.50 m above the GL. Necessary girders with lifting arrangements are to be made to lift the pump set. Internal access ladders are to be provided including supply of all materials and labour complete. The cost includes soil testing for the assessment of soil bearing capacity and ground water table etc. The well shall be designed for the uplift pressure and external earth pressure as per IS 456. The cost includes earth work excavation in all type of soils, refilling sides, necessary barricading arrangement during construction, waterproof testing and removal of excess earth and disposing in a suitable location away from the site as per approved design, drawings and specification and as directed by the Engineer in charge (DBO Item)

Design, Supply, Installation, Testing, and commissioning of the submersible pump sets having duty condition of 1.30 MLD with adequate head to reach the river bed at the collection well with panel board mounted on the pedestal with proper earthing arrangement in Khowai town – 2 Nos (1W+1 SB) (DBO Item)

Sewage Treatment Plant with Co treatment of Septage by MBBR Technology for Khowai Design and Construction of STP of capacity 1.30 MLD with MBBR Technology of the following capacities , including design, drawing as per approval from appropriate authority etc. complete, as directed by engineer-in-charge including all Civil and Mechanical, electrical works of SSTP like Ramp for cesspool vehicle, Inlet Chamber, screen chamber, Primary settling tank, MBBR Reactor 2 Nos, Mechanical sludge dewatering unit with polymer dosing unit, Secondary settling Tank , manure yard, Internal water & sludge carrying pipes, pumps, valves, pits, electricity etc. all complete i/c civil, mechanical, electrical and instrumentation works, Electrical Sub-station, as per approved design, drawings and specification and as per the direction of Engineer in Charge. The Work shall be designed as per CPHEEO manual and as per the SBM – Urban 2.0 guidelines and executed as per approved design, drawings and specification and as per the direction of Engineer in Charge. The cost inlcudes other amenties mentioned below also. Design and develop the land proposed / approved for the construction of STP site and Design and construct MS Wire Mess Fencing work 1.50 m height with MS structural angle post at 2.50 m interval with 0.5 m masonry wall foundation including supply of materials and labor complete. Design and construction of 7.5 sqm Guard cum Operator’s room, construction of 18 sqm Administrative Building, construction of 9 sqm Store Cum go down, construction of 4.75 m wide CC interlocking paver block internal roads with 750 mm x 600 mm RCC box drains on both side of the roads including supply of all materials and labor complete. Design and construction of Tube Well with water purifier(Iron Removal Plant) including supply and installation submersible pump and supply of 2000 liters capacity PVC (4 Layers) water storage reservoir(To be placed at the roof of Administrative Building) with the supply and installation of HDPE /PVC pipelines for the supply of water to the STP and other Buildings, landscaping and Buildings, STP units and Yard lighting/illumination arrangements, as required as per the approved design, drawings and specification and direction of the Engineer in Charge.

Supply, Delivery of Cesspool Vehicle of capacity 1 KL as per the specification mentioned in the Technical specificatiion

Interception and Diversion works for Khowai Design, Supply, delivery, laying, jointing, and testing of 250 mm dia HDPE PN 6 pipe gravity sewer main with proper slope to achieve self-cleaning velocity with necessary bedding arrangements as per CPHEEO Sewerage manual, design and construction of Brick Manholes of required sizes (Internal sizes depends on the depth of Invert level at each location of Manhole) at an interval of 50 m for cleaning purpose up to the final Interception point including supply of all materials and labour complete as per approved design, drawings and specification. The cost includes earth work in all type of soils, refilling and compaction including road restoration to the original position and removal of surplus earth, necessary barricading arrangement during construction for safety and dewatering arrangement etc complete as the approved drawing and specification and as directed by the Engineer in charge

Design, Supply at site, laying, testing to the required pressure and commissioning of DI K9 Pumping mains from Collection well (final interception point) up to the inlet chamber of the STP with proper bedding arrangement. The cost includes the earth work excavation, refilling charges and removal of surplus earth, necessary barricading arrangements during construction and dewatering arrangements etc complete as per approved design, drawings, and specification and as directed by the Engineer in charge. Supplying, laying, jointing, testing and commissioning 250 mm diameter DI K9 pumping main with necessary accessories, valves, valve chambers from collection well to Inlet chamber of STP in khowai

Effluent Disposal arrangment for Khowai Design, supplying, laying, testing to the required pressure and commissioning of DI K9 pipes pumping main from treated water sump at STP site to the river with proper bedding arrangement. The cost includes the earth work excavation, refilling charges and removal of surplus earth, necessary barricading arrangements during construction and dewatering arrangements etc complete as per approved design, drawings, and specification and as directed by the Engineer in charge. Supplying, laying, jointing, testing and commissioning 250 mm diameter DI K9 pumping main with necessary accessories, valves, valve chambers from collection well to Inlet chamber of STP in Khowai

Operation and Maintenance for Khowai: O & M Fee for 5 year Operation Service Period for cleaning and maintaining for new STP 1.30 MLD conforming to the relevant Service Levels including all necessary tasks, activities and obligations as necessary for operations, maintenance and management of waste water and sludge drying system and all related infrastructure comprising of Ramp, inlet Chamber, screen chamber, Grit Chamber, Primary settling tank, MBBR Reactor 2 Nos, Mechanical sludge dewatering unit with polymer dosing unit, Secondary settling tank, manure yard, repair, sludge collection management, all commercial services including collection of the ULB’s revenue, customer services including recording and redressing customer complaints, including all administrative tasks, management tasks and all services to be provided as a prudent etc., as well as cost of management, wages, incentives, operations, maintenance, spares, administration, equipment, transport, taxes and levies, including all necessary preventive and reactive maintenance of all civil, mechanical, electrical and instrumentation units, administration, transport, communications, management information systems, reporting, including cost of all wages, chemicals, electricity*, consumables, administration, transport, spares, insurance, taxes levies etc., complete but excluding statutory payments. *Electricity: Bidders shall note the arrangements for pricing and payment of electricity charges will be borne by ULB's. The bidder shall separately provide the break-up of salaries and wages, consumables, electricity, preventive maintenance for civil, mechanical, electrical and instrumentation, insurance and all other costs in a separate sheet for analysis by Employer i)1st Year

ii) 2nd Year

iii) 3rd year

IV) 4th year

v) 5th year

Interception and Diversion works: Teliamura Town Design, Supply and Construction of RCC Interception Chamber of size 1 x 2 x1.50 m size for the Major identified waste water (Grey/ Blackish water) conveying drains in core areas with the provision of overflow gate for diverting rainwater during rainy season and wastewater diversion in to the gravity system including measuring the flow of sewage coming in the drain and size proposed shall be capabale to handle the flow in the drain (DBO item)

Design and construction of 3.00 m diameter RCC collection well for required depth for storing the wastewater 1.30 MLD with proper arrangement for erection of non-clog submersible pump sets. The side wall shall be extended 1.50 m above the GL. Necessary girders with lifting arrangements are to be made to lift the pump set. Internal access ladders are to be provided including supply of all materials and labour complete. The cost includes soil testing for the assessment of soil bearing capacity and ground water table etc. The well shall be designed for the uplift pressure and external earth pressure as per IS 456. The cost includes earth work excavation in all type of soils, refilling sides, necessary barricading arrangement during construction, waterproof testing and removal of excess earth and disposing in a suitable location away from the site as per approved design, drawings and specification and as directed by the Engineer in charge.

Design, Supply, Installation, Testing, and commissioning of the non-clog submersible pump sets having duty condition of 1.30 MLD with adequate head to reach the inlet chamber of the STP at the collection well with panel board mounted on the pedestal with proper earthing arrangement in Melaghar town – 2 Nos (1W+1 SB)

Effluent Disposal Arrrangement Design and construction of 3.00 m diameter RCC collection well for required depth for storing the treated water 1.30 MLD with proper arrangement for erection of submersible pump sets. The side wall shall be extended 1.50 m above the GL. Necessary girders with lifting arrangements are to be made to lift the pump set. Internal access ladders are to be provided including supply of all materials and labour complete. The cost includes soil testing for the assessment of soil bearing capacity and ground water table etc. The well shall be designed for the uplift pressure and external earth pressure as per IS 456. The cost includes earth work excavation in all type of soils, refilling sides, necessary barricading arrangement during construction, waterproof testing and removal of excess earth and disposing in a suitable location away from the site as per approved design, drawings and specification and as directed by the Engineer in charge

Design, Supply, Installation, Testing, and commissioning of the submersible pump sets having duty condition of 1.30 MLD with adequate head to reach the inlet chamber of the STP at the collection well with panel board mounted on the pedestal with proper earthing arrangement in Melaghar town – 2 Nos (1W+1 SB)

Design and Construction of 1.30 MLD capacity STP with MBBR Technology Design and Construction of 1.30 MLD capacity STP with MBBR Technology of the following capacities , including design, drawing as per approval from appropriate authority etc. complete, as directed by engineer-in-charge including all Civil and Mechanical, electrical works of SSTP like Ramp for cesspool vehicle, Inlet Chamber, screen chamber, Primary settling tank, MBBR Reactor 2 Nos, Mechanical sludge dewatering unit with polymer dosing unit, Secondary settling Tank , manure yard, Internal water & sludge carrying pipes, pumps, valves, pits, electricity etc. all complete i/c civil, mechanical, electrical and instrumentation works, Electrical Sub-station, as per approved design, drawings and specification and as per the direction of Engineer in Charge. The Work shall be designed as per CPHEEO manual and as per the SBM – Urban 2.0 guidelines and executed as per approved design, drawings and specification and as per the direction of Engineer in Charge. The cost inlcudes other amenties mentioned below also. Design and develop the land proposed / approved for the construction of STP site and Design and construct MS Wire Mess Fencing work 1.50 m height with MS structural angle post at 2.50 m interval with 0.5 m masonry wall foundation including supply of materials and labor complete. Design and construction of 7.5 sqm Guard cum Operator’s room, construction of 18 sqm Administrative Building, construction of 9 sqm Store Cum go down, construction of 4.75 m wide CC interlocking paver block internal roads with 750 mm x 600 mm RCC box drains on both side of the roads including supply of all materials and labor complete. Design and construction of Tube Well with water purifier(Iron Removal Plant) including supply and installation submersible pump and supply of 2000 liters capacity PVC (4 Layers) water storage reservoir(To be placed at the roof of Administrative Building) with the supply and installation of HDPE /PVC pipelines for the supply of water to the STP and other Buildings, landscaping and Buildings, STP units and Yard lighting/illumination arrangements, as required as per the approved design, drawings and specification and direction of the Engineer in Charge.

Supply, Delivery of Cesspool Vehicle of capacity 1 KL as per the specification mentioned in the Technical specificatiion

Interception and Diversion works Design, Supply, delivery, laying, jointing, and testing of 250 mm dia HDPE PN 6 pipe gravity sewer main with proper slope to achieve self-cleaning velocity with necessary bedding arrangements as per CPHEEO Sewerage manual, design and construction of Brick Manholes of required sizes (Internal sizes depends on the depth of Invert level at each location of Manhole) at an interval of 50 m for cleaning purpose up to the final Interception point including supply of all materials and labour complete as per approved design, drawings and specification. The cost includes earth work in all type of soils, refilling and compaction including road restoration to the original position and removal of surplus earth, necessary barricading arrangement during construction for safety and dewatering arrangement etc complete as the approved drawing and specification and as directed by the Engineer in charge

Design, Supply at site, laying, testing to the required pressure and commissioning of DI K9 Pumping mains from Collection well (final interception point) up to the inlet chamber of the STP with proper bedding arrangement. The cost includes the earth work excavation, refilling charges and removal of surplus earth, necessary barricading arrangements during construction and dewatering arrangements etc complete as per approved design, drawings, and specification and as directed by the Engineer in charge. Supplying, laying, jointing, testing and commissioning 250 mm diameter DI K9 pumping main with necessary accessories, valves, valve chambers from collection well to Inlet chamber of STP in Teliamura

Effluent Disposal arrangment Design, supplying, laying, testing to the required pressure and commissioning of DI K9 pipes pumping main from treated water sump at STP site to the river with proper bedding arrangement. The cost includes the earth work excavation, refilling charges and removal of surplus earth, necessary barricading arrangements during construction and dewatering arrangements etc complete as per approved design, drawings, and specification and as directed by the Engineer in charge. Supplying, laying, jointing, testing and commissioning 250 mm diameter DI K9 pumping main with necessary accessories, valves, valve chambers from collection well to Inlet chamber of STP in Teliamura

Operation and Maintenance for Teliamura Town O & M Fee for 5 year Operation Service Period for cleaning and maintaining for new STP 1.30 MLD conforming to the relevant Service Levels including all necessary tasks, activities and obligations as necessary for operations, maintenance and management of waste water and sludge drying system and all related infrastructure comprising of Ramp, inlet Chamber, screen chamber, Grit Chamber, Primary settling tank, MBBR Reactor 2 Nos, Mechanical sludge dewatering unit with polymer dosing unit, Secondary settling tank, manure yard, repair, sludge collection management, all commercial services including collection of the ULB’s revenue, customer services including recording and redressing customer complaints, including all administrative tasks, management tasks and all services to be provided as a prudent etc., as well as cost of management, wages, incentives, operations, maintenance, spares, administration, equipment, transport, taxes and levies, including all necessary preventive and reactive maintenance of all civil, mechanical, electrical and instrumentation units, administration, transport, communications, management information systems, reporting, including cost of all wages, chemicals, electricity*, consumables, administration, transport, spares, insurance, taxes levies etc., complete but excluding statutory payments. *Electricity: Bidders shall note the arrangements for pricing and payment of electricity charges will be borne by ULB's. The bidder shall separately provide the break-up of salaries and wages, consumables, electricity, preventive maintenance for civil, mechanical, electrical and instrumentation, insurance and all other costs in a separate sheet for analysis by Employer. i) Ist year

ii) 2nd Year

iii) 3rd year

IV) 4th year

v) 5th year