Tripura Tourism Development Corporation Limited Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Costs
EMD
₹ 35,27,199Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_TTDC_15646_1Bid Award Id
ViewTender No
58/MD/TTDCL/MTD-PRASAD/2020-21Tender Authority
Tripura Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://http://tripuratourism.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Draft Notice Inviting e-Tender for development of Tripura Sundari Temple under PRASAD Scheme.
Notice Inviting e-Tender for development of Tripura Sundari Temple under PRASAD Scheme.
BOQ Items
1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone
aggregate 40 mm nominal size)
973.02
-
9324.5
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
298.36
-
445.9
Applying a coat of residual petroleum bitumen of grade of VG-10 ofapproved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
268.92
-
124.7
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over75mm thick bed of dry brick ballast 40 mm nominal size, well rammedand consolidated and grouted with fine sand, including finishing the topsmooth.
488.06
-
810.5
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases for columns etc. for mass
concrete with timber plank
1512.09
-
268.9
Walls (any thickness) including attached pilasters,
buttresses, plinth and string courses etc. using shuttering ply
153.26
-
370
Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
8084.19
-
539
R.C.C. Cast-in-situ Shelves
85.66
-
260.5
Lintels, beams, plinth beams, girders, bressumers and
cantilevers with shuttering ply
7370.4
-
385.2
Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
4675.17
-
483
Cornices and mouldings
465.02
-
481.4
Edges of slabs and breaks in floors and walls under 20
cm. wide Under 20 cm wide
431.38
-
99.5
Weather shade, Chajjas, corbels etc., including edges.
48.6
-
417.7
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
369376.05
-
78.2
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
353258.54
-
78.2
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
1006.06
-
38.4
Providing and laying in position design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per the direction of Engineer-in-Charge. (Note :- Cement content considered in this item is @ 410 kg/cum. Excess/ less cement used as per design
mix is payable/recoverable separately). All works upto plinth level
1452.87
-
10418.2
All works above plinth level upto floor V level
2404.49
-
11235.6
Add for using extra cement or deduct for using less
cement in the items of design mix over and above the
specified cement content therein.
1186.79
-
790.8
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 40 mm thick
350
-
1016
First class brick work in foundation and plinth
including cost of all materials as required complete:- In cement mortar 1:6 ( 1 cement : 6 fine sand ).
460.67
-
8624.1
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in Charge. (The payment of RCC band and reinforcement shall be made for seperately). 230 mm thick
1405.11
-
8409.6
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in Charge. (The payment of RCC band and reinforcement shall be made for seperately). 150 mm thick
125.69
-
8409.6
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
114.7
-
52
Providing and fixing gang saw cut of approved thickness mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 ( 1 cement : 4 fine sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing , curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels:- 18 mm thick Granite of any colour and shade duly
approved:- Area of slab upto 0.50 sqm
33.75
-
3505.9
Area of slab over 0.50 sqm
1159.47
-
3544.6
Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge:- 18 mm thick Granite work.
198.42
-
275
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete
32
-
446.5
Providing and fixing Marble stone in floors over 20 mm
thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade, including rubbing and polishing complete. Raj Nagar plain marble
147.05
-
1900.1
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite
Brown, Cat Eye or equivalent.
4848.26
-
3528.4
Providing wood work in frames of doors, windows,
clerestory windows and other frames, wrought
framed and fixed in position : Local Teak Wood
3.95
-
87719.7
Sal wood
2.89
-
109431.4
Providing and fixing ISI marked flush door shutters
conforming to IS: 2202 (Part I) decorative type, core
of block board construction with frame of 1st class
hard wood and well matched teak 3 ply veneering
with vertical grains or cross bands and face veneers
on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt
hinges with necessary screws.
102.3
-
3007.1
Providing and fixing ISI marked flush door shutters
conforming to IS: 2202 (Part I) non-decorative type,
core of block board construction with frame of 1st
class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and
face veeners on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt
hinges with necessary screws.
70.14
-
1786.6
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Local Teak Wood 35 mm thick shutters
89.28
-
2639.2
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to openings /wooden frames with rawl plugs
screws etc.
1235.16
-
126.4
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
24
-
162.4
Providing and fixing IS : 3564 marked Aluminium die
cast body tubular type universal hydraulic door
closer with necessary accessories and screws etc.
complete.
18
-
1026
Providing and fixing 30mm thick wire gauge
shutters using galvanised M.S. wire gauge of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked Stainless Steel butt hinges with necessary screws. Local Teak Wood
79.65
-
2296.3
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm
312
-
98.75
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
85.2
-
99.6
Steel work welded in built up section/framed work
including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer using
steel etc. complete as required:- In stringers, treads, landing etc. of stair cases including use of chequered plate wherever required, all complete.
1317.26
-
95.4
In grating, frames, guard bar, railing, brackets, gates and
similar works, all complete.
87205.68
-
113.8
Providing, fabricating, transporting, assembling and erection in position of Steel members for steel colunms, built up beams using structural tubular sections (round, square or rectangular hollow tubes etc. confirming to IS 4923 / IS 1161, Yield strength 310 MPa as per latest IS Code) to the required profile & shape as called for as per the drawing & specifications and of approved make including the shear connectors /studs and fusion weld to top of horizontal member. This item also includes prepration of shop drawings and their approval, necessary templates, adequate temporary supports, scaffolding & staging, all cutting, grinding, sliding & all labour tools, plants & equipments & operations etc. required to complete the job as per drawing & specification. Every precaution to be taken to prevent rusting of sections. This item also includes all test on materials & welded fabricated parts as per specification and direction of Engineer - in - Charge. Temporary bolts & nuts ( grade EN 8 ) to be used during assembling & shall be removed before site erection. All site erection bolts shall be HSFG type only. The item to include cost of sand blasting on materials, application of primer and epoxy paint in internal & external in fabrication shop & final painting on site including all touch up works after erection as per technical specification. Scope of work includes:
i) Design & fabrication of any additional temporary structure
including all type of lifting brackets, supporting brackets ,which will be required for transportion & erection in position / launching of fabrication part or complete element in position.
ii) Making provision & arrangement for required opening / inserts for fixing lights fixtures & funning cable conduits.
iii) All incidentials labour, equipement & plants required to execute & complete the job from fabrication to erection at final position as per drawing, specification & direction of Engineer - in -Charge.
iv) Cleaning & removing of all spoil, temporary arrangementa for casting of deck slab/roofing. v) All safety measures required to execute & complete the work.
vi) Procurement of all materials from approved manufactures &
fabrication. Complete methodology for structural steel work, Name of workshop for fabrication works, Testing facilities & erection procedures etc.to be intimated for approval of Engineer - in - Charge.
vii) The provision of temporary bearing / sand jacks for supporting steel members during erection.
viii) Provision of stability during erection against wind load or any other type of loading on structural steel members during erection. ix) Measurement shall be only for structural steel which is erected & is part of permanent structure & paid as per approved shop drawings. All wastages, temporary works, Jigs, temporary assembly bolts etc. are deemed to be included in rates. No allowence or increse in weight for welding , nuts & bolts etc will be applicable
21870
-
136.5
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes
7.92
-
838.9
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
1758.01
-
1933.75
Providing and fixing rectified glazed wall tiles 300 x 450
mm or more conforming to IS : 15622 - 2017 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
417.5
-
1010.4
Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white
cement and matching pigment etc. complete. Anti-Skid Tiles Ceramic Tiles 1st quality 300 x 300mm in all shades and designs
451.73
-
841.2
Providing and fixing Kota stone in floors over 20 mm
thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishing complete. 25 mm thick
64.06
-
1551.9
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1 : 3 ( 1 cement : 3 fine sand ) and joined with ordinary cement slurry mixed with pigment to match the shade of slabs, including rubbing and polishing complete.
2.2
-
1642.9
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Double charged Stainfree vitrified tiles Size of Tile 600x600 mm
592.27
-
1118.2
Providing and laying cement concrete 1:2:4 (1 cement: 2
fine sand : 4 graded well burnt brick aggregate) flooring
finished with a floating coat of neat cement including
cement slurry, rounding of edges and strips and cost of
glass strips etc. complete. 40mm thick.
290.4
-
526.4
Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size well burnt brick aggregate and base course and filling with 150 mm thick fine sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as
per direction of Engineer-in-charge.
1745.25
-
1839.3
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m2
2275
-
1011.2
SUB HEAD : 12.0 FINISHING 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
13190.13
-
159.6
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)
458.06
-
203.4
1:6 (1 cement: 6 coarse sand)
2160.2
-
185.3
Providing and applying plaster of paris putty of 2 mm
thickness over plastered surface to prepare the surface
even and smooth complete.
2688.06
-
126.2
Finishing walls with premium acrylic smooth exterior paint with Silicon additives of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer
applied @ 2.20 kg/10 sqm)
6389.03
-
119.3
Painting with silicon & acrylic emulsion based water
thinnable sealer of approved brand and manufacture on
wet or patchy portion of plastered surfaces [Payment
shall be made after submission of Test Certificate issued by the Manufacturer]: Two coats
16137.18
-
100.7
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work
220.45
-
82.8
French spirit polishing [Payment shall be made after
submission of Test Certificate issued by the
Manufacturer]: Two or more coats on new works including a coat of wood filler
682.1
-
218
Finishing with Epoxy paint ( two or more coats) of approved brand and manufacture at all locations prepared and applied as per manufacturer's specification including appropriate priming coat, preparation of surface etc. complete [Payment shall be made after submission of Test Certificate issued by the Manufacturer]. On steel work
729
-
130.8
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
20514.29
-
101.6
6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.
4732.39
-
158.6
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct Mud Circulation (DMC) or Bailer and Chisel Technique by Tripod and Mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads. (Length of pile for payment shall be measured upto bottom of pile cap). Note: Truck Mounted rotary / TMR / Tubewell Boring Machine shall not be used. 600 MM DIA Pile
8520
-
3781.3
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer incharge:- Single pile above 50 tonne and upto 100 tonne capacity
pile:- Initial test (Test Load 2.5 times the safe Capacity)
5
-
60207.2
Routine test (Test Load 1.5 times the safe Capacity).
5
-
30772.6
Providing and fixing 12 mm thick frameless toughened
glass door shutter of approved brand and manufacture,
including providing and fixing top & bottom pivot &
spring type fixing arrangement and making necessary
holes etc. for fixing required door fittings, all complete
as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
83.9
-
5644.6
Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck, using integral crystalline admixture @ 0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufaturer’s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R- 2010 i.e. by reducing permeability of concrete by more than 90%,compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable
of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
233.3
-
387.2
Providing and applying integral crystalline slurry of
hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck
etc., prepared by mixing in the ratio of 5 : 2 (5 parts
integral crystalline slurry : 2 parts water) for vertical
surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush as required as per direction of the Engineer-in-charge. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm.
243.7
-
506.3
Providing and laying integral cement based water
proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc, as directed by Engineer-in-Charge and consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface
before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 fine sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer
of cement mortar of mix 1:5 (1 cement :5 fine sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and
slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 fine sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300
mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing
and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
4860.13
-
1356.5
Providing and fixing approved brand and manufacture SS 304 grade Sliding Door bolt 250mm long with 16 mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.
62
-
348
Providing and fixing approved brand and manufacture SS 304 grade Tower bolt 250mm long with 10mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.
176
-
209
Providing and fixing approved brand and manufacture SS 304 grade Tower bolt 150mm long with 10mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.
170
-
145
Providing and fixing approved brand and manufacture SS 304 grade wall mounted door buffer fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.
57
-
185
Providing and fixing approved brand and manufacture SS 304 grade Door Stopper - door mounted hanging type fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.
47
-
70
Supply and Installation of polycarbonate multi-layered system, a complete assembly of extruded multilayer UV protected polycarbonate panels incorporated into a complete system. Coextruded UV protected polycarbonate panel system of min 18 mm thick panel of 1050-1200 mm width for bigger spans and minimal junctions for better performance. Panels shall have minimum seven layers with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical offset standing seam at both sides of the panel. Panels shall provide angular daylight for better shading and variable day light transmission throughout the day with translucent and opaque combination of layers. Panels have to be fixed on Purlin with snap on connectors with grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate Panel which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.8 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Color: As per Approval. Approved Make: DPI Daylighting/ Bayer/ Polygal/ GE/ Vergola or Equivalent.
270
-
4250
HORTICULTURE & LANDSCAPING Supplying and stacking of good earth at site including royalty and carriage upto 1 km (earth measured in stacks will be reduced by 20% for payment).
1260
-
469.5
Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :
1260
-
442.1
Supplying and stacking at site dump manure from approved source,
including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20mm
630
-
229.95
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
1890
-
32.1
Grassing with ‘Doob’ grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately). In rows 5 cm apart in either direction.
84
-
15.55
Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost
of sludge or manure (the good earth shall be paid for separately).
84
-
30.25
Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, with in a lead of 50 m, lift upto 1.5 m complete.
151
-
195.9
Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil
210
-
79.3
Providing and fixing M.S flat iron tree guard 53 cm in plan and 1.3 m high, above ground and .4 m below ground lvl consisting 4 nos 25X25X3 mm, 1.6 m long and 8 nos 25X3 mm 1.2m long. The vertical members shall be welded to 4 nos 25X6 mm MS flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick MS sheet of size 250X100 mm shall be welded to the tree guard near the middle height and lettered CPWD/ PWD/any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and rammin. The tree guard shall be painted with two or more sythetic enamel paint of approved brand and manufacturer over a coat of primer, complete in all respect as per satisaction and direction of officer-n-charge.
168
-
1949.15
Supplying and stacking of Cassiafistula (Amaltash) plant of height 120 to 135 cm in big poly bag of size 25 cm as dir. of officer incharge.
30
-
65
Supplying and stacking of Delonix reia (Gulmohar) plant of height 150 to 165 cm in big poly bag of size 25 cm as dir. of officer incharge.
30
-
60
Supplying and stacking of Pride of India plant of height 150 to 165 cm in big poly bag of size 25 cm as dir. of officer incharge.
40
-
522
Supplying and stacking of Azadirachta indica (Neem) plant of height 120 to 130 cm in big poly bag of size 25 cm as dir. of officer incharge.
40
-
65
Detail of tree Washingtonia palm
40
-
14490
Foxtail palm
60
-
2318
Silver Oak 4 - 7 m folliage
100
-
562
Magnolia Rosie 2- 4 m folliage
100
-
927
Anar (30) 2-7 m folliage
100
-
116
Chiku (24) 3 -8m folliage
100
-
290
Bougainvillea 2-4m folliage
100
-
522
Sassia Siamea 3-8m folliage
100
-
562
Rudraksha Tree 5-15m Folliage
20
-
580
White Sandal 2-5 m Folliage
30
-
522
Rain Tree
80
-
290
Peepal tree
6
-
638
Alostonia
80
-
562
Mango (50)
80
-
116
Guava (30)
80
-
116
Hamelia
80
-
174
Weeping Willow
80
-
116
Cassia Javanica
80
-
93
Alternanthera
80
-
12
Kadam 6'-8' ht
20
-
325
Chitwan 6-8' ht
100
-
336
Ashok pendula 6'-8' ht
100
-
562
Jacarnda 6'-8' ht
100
-
562
Tabebuia 2'-3' ht
100
-
406
Plumeria 6'-8' ht
80
-
1739
Pink plumeria 6'-8' ht
100
-
811
SHRUS (have several woody item) Coral Hibiscus 2'-3' ht
100
-
151
Massanda Pink 2'-3' ht
100
-
151
Kachnar 5'-6' ht
100
-
232
Bottle Brush 5'-6' ht
100
-
232
Ixora 2'-3' ht
100
-
151
Hamelia 2'-3' ht
100
-
52
Calistemon 5'-6' ht
100
-
151
Ficus black Tapori 3'-4' ht
80
-
1055
Ficus Prestige Boll 3'-4' ht
80
-
1055
Ficus Panda Bolll 3'-4' ht
80
-
1055
Ground edging Plant Eranthemum
100
-
209
Verbena
100
-
151
Setcreasea
100
-
272
Verbena Mix
100
-
151
Providing & laying RCC bench
20
-
11592
Electrical Lawn mover power Grass cutter & power weed shear
2
-
40572
Supplying and fixing Vertical garden ( Wall) along with drip irrigation system, fixation of frame, planter, manure, fertilizer, soil mixing, supply of plants filling and plantation.
40
-
10433
Steel work welded in built up section/framed work
including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer using
steel etc. complete as required:- In stringers, treads, landing etc. of stair cases including use of chequered plate wherever required, all complete.
1200
-
95.4
ELUMINATED SIGNAGE Providing and fixing of signages, modular curved frame technology,of various widths and lengths, to form suggested usages,made of aluminium extruded sections , duly anodised ,all signages shall be provided with 0.6-0.8mm polycarbonate protecting film over the prints, of appropriate size, Model : Illusion by SIGNSUTRA or Equivalent. ILLUSION C-80,ROOM NUMBER (SIZE=80X120)
15
-
200
ILLUSION C-80, NAME PLATE (SIZE=80X300)
4
-
483.6
ILLUSION C-210(BOTH SIDE)WALL PROJECTED TOILET ILLUSION C-210(BOTH SIDE)WALL PROJECTED LADIES TOILET (SIZE=210X250)
8
-
2679.6
ILLUSION C-210(BOTH SIDE)WALL PROJECTED GENTS TOILET (SIZE=210X250)
8
-
2679.6
ILLUSION C-210(BOTH SIDE)WALL PROJECTED HANDICAP TOILET (SIZE=210X250)
4
-
2679.6
ILLUSION C-120,DOOR PLATE TOILET ILLUSION C-80, ELECTRICAL PANEL (SIZE=80X400)
2
-
644.8
DRINKING WATER (SIZE=150X300)
4
-
1267.2
AUTHORISED PERSONAL ONLY (SIZE=120X120)
6
-
422.4
Providing and fixing of signages,customised to the architect's design,the signage to be made of 10 mm casted clear acrylic sheet duly cut by laser, all text to be of 2 mm thick acrylic duly laser cut, partially housed and pasted on to engraved surface of the text in the clear acrylic base, the 10mm acrylic sheet to be fixed on 25x25mm section of teak wood with help of crafted SS pins, and further fixed to the priscribed location with the help of wooden dowels,and required adhesive,as per drawing. MAIN DIRECTORY (SIZE=1200X600)
4
-
23040
FOOD COURT (SIZE=375X300)
4
-
3600
RECREATION (SIZE=375X300)
4
-
3600
MISSC, (SIZE=375X300)
4
-
3600
Providing and fixing of Photoluminescent, 1mm rigid pvc based sheet containg lumingen 3, as base chemical,with high intensity luminous glow capacity. PHOTOLUMINESCENT SIGN , FIRE HOSE (SIZE=250X200)
6
-
1024
PHOTOLUMINESCENT SIGN,FIRE ALARM CALL POINT (SIZE=150X200)
4
-
614.4
PHOTOLUMINESCENT SIGN, EVACUATION PLAN(SIZE=200X300)
7
-
1500
PHOTOLUMINESCENT SIGN,PULL AND PUSH (90 MM DIA)
20
-
204
Providing and fixing of electrocut casted vinylof approved design, of 3M, or equivalent make VINYL STICKER, FIRE HOSE(SIZE=375X250)
8
-
350
Providing and fixing prohibition signage,made of aluminium composite panel, and all text and pictograms as screen printed and malamine coated, all fixtures in 304 grade SS, all design as per architects approval. NO SMOKING(SIZE=200X200)
10
-
534
NO SPITING (SIZE=200X200)
20
-
534
KEEP SILENCE/PL SWITCH OFF MOBILE (SIZE=200X200)
8
-
534
Providing and fixing prohibition signage,made of casted acrylic, duly laser cutand all text and pictograms as 3M vinyl electrocut,all fixing arrangements in 304 grade stainless steel,as per design . CEILLING DRIECTION SIGN BOARD (SIZE=300X1200)
10
-
5650
EXTERIOR SIGNAGES Providing and fixing of exterior signage, to be fixed on the roof top with the help of MS framework, Signage to be made of MS pipe frame work, cladded with 3mm Aluminium composite panel, duly cut by CNC router, and the letters to be laser cut,10mm casted clear acrylic,inserted in a cut out fitted on 4 mm 040 casted acrylic, the letters front to be 3M day and night electrocut vinyl, The signage shall illuminated with back lit LED, of PHILLIPS/GE make of atleast 5Yrs gurantee, (certificate to be provided, by the makers of LED), complete in all respects Tample discription in english (SIZE=8000X1000)
1
-
384000
Tample discription in hindi (SIZE=8000X1000)
1
-
384000
Tample discription in Regional (SIZE=8000X1000)
1
-
384000
Providing and fixing of main entrance sign , made of laser cut 2mm ,304 grade brush Stainless steel,and letters to be laser cut in black acylic partially inserted in SS cut outs, the plate to be fixed on exsisting Granite with the help of SS studs (SIZE=1200X2400)
2
-
25500
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials
within 50 metres lead.
8
-
668.15
Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres
Up to 150 mm diameter
4
-
239.05
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
60
-
39
Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.
6
-
2130
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
8
-
138.85
SANITARY INSTALLATIONS & C.P FITTINGS Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid
21
-
5149.9
Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
9
-
4634.9
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
24
-
3070.6
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia
6
-
87
40 mm dia
10
-
93.9
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
24
-
834.1
Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required. Kitchen sink with drain board Size 510x1040 mm bowl depth 250mm
8
-
5073.3
Range of two half stall urinals with 5 litre PV.C. automatic flushing cistern.
9
-
10905.2
Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
16
-
2734.2
CP Brass fittings Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
72
-
96.1
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre
long with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and make as approved by Engineer - in - charge.
21
-
297.55
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 a) 15 mm nominal bore
44
-
487.1
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. ( for sink) a) 15 mm nominal bore
8
-
562.3
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
62
-
548.4
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
34
-
883.05
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
20
-
222.4
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
20
-
413.1
C.I. SOIL WASTE & VENT PIPES AND FITTINGS Providing & fixing soil, waste and vent pipes. a) 100mm dia centrifugally cast iron S & S pipe.
345
-
1050.3
b) 75mm dia centrifugally cast iron S & S pipe.
235
-
959.5
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. ( for wash basin waste ) 32mm dia nominal bore
130
-
455.6
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. a) 100mm
51
-
365.1
b)75mm
33
-
315.4
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc. a) for 100mm dia pipe.
86
-
196.7
b) for 75mm dia pipe.
50
-
193.8
Providing & fixing cast iron coller. a) 100mm dia.
56
-
365.4
b) 75mm dia.
48
-
302.7
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : a) 100mm inlet & 100mm outlet.
9
-
1148.3
a) 100mm inlet & 75mm outlet.
24
-
1190
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. a) 100mm
6
-
507.1
b) 75mm
5
-
431.9
Providing and fixing plain bend of required degree. a) 100mm
3
-
433.3
b) 75mm
7
-
342.8
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100mm
32
-
773.2
Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 100x100x100mm
6
-
730.7
75x75x75mm
8
-
446.8
Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75mm
20
-
1078.5
Providing and fixing single unequal plain invert branch of required degree : 100x100x75mm
8
-
870.8
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.) a) 100mm
10
-
573.5
b) 75mm
2
-
464.9
Providing and fixing cast iron terminal guard. 100 mm
50
-
410.6
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) 110 mm dia
540
-
1288.3
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm
1660
-
268.5
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Bend 87.5 degree 110 mm Bend
212
-
140.9
Shoe (Plain) 110 mm Shoe
106
-
118
Providing and fixing to the inlet mouth of rain water,soil, waste & vent pipes pipe PTMT grating withthickness of 8mm and weighing not less than 100gm.
106
-
97.2
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
324
-
190.5
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
54
-
254
INTERNAL WATER SUPPLY WORKS Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 20mm dia nominal outer dia pipes
295
-
422.6
25mm dia nominal outer dia pipes
230
-
467.1
32mm dia nominal outer dia pipes
150
-
570
25mm dia nominal bore
70
-
369.6
32mm dia nominal bore
149
-
455.6
50mm dia nominal bore
100
-
669.1
25mm dia nominal bore
70
-
14.2
32mm dia nominal bore
149
-
17.3
50mm dia nominal bore
100
-
23.6
Terrace and external work 65mm dia nominal bore
8
-
23.1
25mm dia nominal bore
12
-
237.7
32mm dia nominal bore
12
-
292.9
40mm dia nominal bore
5
-
361.8
65mm dia nominal bore
4
-
733.8
Providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore
14
-
512.2
32mm dia nominal bore
18
-
598.5
40mm dia nominal bore
4
-
695.9
65mm dia nominal bore
6
-
1503.2
Providing and fixing brass stop cock of approved quality. b) 20 mm nominal bore
4
-
410.6
Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. Capcity in Per Liters
16000
-
10
INTERNAL SEWERAGE SYSTEM Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 100mm diameter
70
-
252.5
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design 100mm dia SW pipe
70
-
1288.3
Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type With Sewer bricks conforming to IS : 4885
22
-
2321.45
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design With 20x20 mm square bar
50
-
422.2
RO PLANT - Raw Water Characteristics - As per Water Test Analysis Report of Shriram Test Laboratory to be got done by the supplierTreated Water Quality Turbidity : 1NTU pH : 6.5-7.0 Chlorides : 10 ppm Sulphates : 5 ppm TDS : 150 ppm TDS : 150 ppm TDS : 150 ppm FRP Dual Media Filter Antiscalant Dosing System including pump chemical dosing pump, tanks etc. Polypropylene Micron/cartridge Filter and SS housing Stainless steel vertical multistage inline high pressure pump including dry running protection Spirally wounded RO Membranes Composite FRP RO pressure tube/vessel Automatic RO Module Cleaning System including chemical pump, cartridge filter, tanks etc. Chemical dosing pump, tanks etc. Instrumentation including flow meters, digital TDS meter, digitaL pressure gauges, low pressure switch, high pressure switch etc. complete. uPVC (8 kg/cm2) piping and ABS valves for low pressur Providing, installation, testing and commissioning of vertical insulated and GI sheet cladded SS 316 tank suitable for storage of RO water tank shall be complete with inlet flange connection of 40 mm (with SS / Copper ball float value), drain, outlet connection of 40 mm, manhole. Volume of tank 500 Litres
4
-
583373.49
COST OF SEWERAGE WORKS Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. up to 1.50 m depth Pipes 80 mm to 300 mm diameter
1860
-
364.2
1.50 m to 3.00 m depth Pipes 80 mm to 300 mm diameter
700
-
491.2
Open timbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area timbered) Depth not exceeding 1.5 meter
2850
-
67
Depth 1.5 to 3.00 meter
4200
-
74.05
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
1390
-
697.3
250 mm. dia. RCC Pipes
375
-
893.1
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm. dia.
1390
-
992.3
250 mm. dia.
375
-
1357.9
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With common burnt clay FPS (non modular) bricks of class designation 75 (i) For Sewer Line
60
-
10905.05
Extra for depth for manholes: Size 90x80cm with With common burnt clay FPS (non modular) bricks of class designation 7.5
8
-
7503
Inside size 90x120cms and 90cms deep including CI cover with frame (MEDIUM duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58kg). With common burnt clay FPS (non modular) bricks of class designation 75 (i) For Sewer Line
17
-
22939.65
Extra for depth for manholes: Size 90x120cm with With common burnt clay FPS (non modular) bricks of class designation 7.5
4
-
8994.6
Constructing brick masonary circular manhole 1.22 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design: 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately): With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
7
-
21235.65
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68m to 2.29m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
8368.4
Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
200
-
463.05
COST OF EXTERNAL WATER SUPPLY WORKSProviding & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) 80mm nominal bore.
745
-
830.7
40mm nominal bore.
115
-
472.8
32mm nominal bore.
245
-
414.2
Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc. 80mm nominal bore.
4
-
2254.8
40mm nominal bore.
8
-
695.9
32mm nominal bore.
14
-
598.5
25mm nominal bore.
6
-
512.2
Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 190 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With Second Class bricks
16
-
17902.6
Constructing brick masonry chamber 600 x 600 x 750 mm inside with F.P.S. brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Sluice Valve / Air Valve, with C. I. surface box 100 mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design
24
-
10581.3
100mm dia Ductile iron double flanged
270
-
1627.5
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter.
270
-
364.2
100mm dia pipes
40
-
82.1
100mm diameter
14
-
4342.9
Provding and fixing C.I. Double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately. a) 50mm dia
4
-
5638.6
Water Transfer Pumps (Hydropneumatic systems) 1-nos, vertical stainless steel in-line pumps having stainless steel casing, stainless steel pump foot diffusers, stainless steel impellers, ceramic bearing, tungsten carbide shaft protection bushes and mechanical seal driven by appx 21.5 hp 2900 RPM,415volts 50 cycles, AC 3 phase TEFC vertical flange motor motor. Each pump shall be capable of delivering 9.0 lps @ 90 mtr head. With complete headers, fittings & foundation as per Specifications
2
-
467041.68
Constructing brick masonry open surface drain with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 fine sand) including earth excavation, 10cm thick bed concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) for filling haunches including 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design: Drain 300 wide average. Depth 45 cm with R.C.C. Slab
225
-
6304.11
Drain 450 wide average. Depth 60 cm with R.C.C. Slab
200
-
7466.46
RAIN WATER HARVESTING 12 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand).
30
-
174.8
Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete: 200 mm diameter
6
-
704.9
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer –in-charge.
2.4
-
4322.2
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450mm internal dimensions
4
-
1228.9
RECHARGE PIT (1 No.) 12 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand).
60
-
174.8
Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete: 200 mm diameter
6
-
704.9
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer –in-charge.
6.2
-
4322.2
Boring/drilling bore well of required dia for Casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia.
50
-
448.4
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge. 150 mm nominal size dia.
50
-
749.5
Supplying, filling, spreading & leveling gravels of size range 4.6 mm to 4.8 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
22.2
-
4322.2
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
9.8
-
4322.2
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450mm internal dimensions
10.8
-
1228.9
Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete.
18.84
-
1165.4
Providing & fixing on wall face unplasticised -Rigid PVC rain water pipes conforming to IS:13592 Tyape A included jointing with seal ring conforning to IS:5382 leaving 10 mm gap for thermal expansion. (i)Single socketed pipes. 110 mm diameter
60
-
268.5
a) Inside size 60x60 cm & 90 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.
155
-
8701.56
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design With 20x20 mm square bar
50
-
422.2
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil 350 mm dia
95
-
560.3
Rocky strata including Boulders 350 mm dia
45
-
1293.8
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (RMS) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150mm nominal size dia
95
-
746.15
`Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
20
-
1497.7
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia having minimum wall thickness 5.00 mm.
95
-
1661.85
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS:8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia
45
-
1769.6
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
12
-
857.6
Supplying & Installation of suitable Hp submersible pump B.S or K.S.B or equivalent make with finolex cable 1x3x2.5 squmm(upto 75mtr) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as MCB of 0-25Amp (Havell or Indocopp or MDS make), Volt & Ampere meter (AE make), single phase preventer (Minilac or VSP -1 make) starter (L&T or BCH make) etc of approved make, 40mm HDPE Pipe (25 mtr) and all accessories complete as per requirement of site. NOTES a) Contractor shall include the rate of electrical control panels complete with all accessories &controls, all Electrical/Mechanical items as required to operate the system automatic/manual. b) Contractor to select suitable HP of pumps . c) Level Controller with sufficient nos. of low / high level alarms, contacts with electrodes and control wiring for the automatic operation of water supply pumps, Submersible Sump Pumps, to achieve the functional requirement shall be provided. Control wiring between these pumps and water tanks shall be provided.Domestic water pumps must start at low water level in overhead domestic water tank & stop at high level in that water tank. Dry running protection shall be provided for all the pumps.Sequencing shall be provided for each set of pumps.
1
-
325155.6
Techno-commercial offer for 200KLD Sewage Treatment Plant with MBR based technology DESIGN BASIS:
Plant capacity 200 M3/day
The Treated water outlet quality will be as follows;
S.No Parameters Unit Inlet Parameters Outlet Parameters
1 pH 4.81 7.0 - 8.0
2 Total Suspended Solid
(TSS)
mg/l 100 30
3 Chemical Oxygen
Demand(COD)
mg/l 1089 150
4 Biological Oxygen
Demand (BOD)
mg/l 700 25
5 Total Dissolved Solid
(TDS)
mg/l 800 800
6 Oil & Grease mg/l 10 0.1
1
-
6621033.69
INTERNAL ELECTRICAL WORKS -WIRING- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
1079
-
1213
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
431
-
555
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
7600
-
265
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1520
-
392
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. earth wire
2305
-
208
2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire
13688
-
229
2 x 4 sq.mm. + 1 x 4 sq.mm. earth wire
8000
-
263
2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire
2950
-
356
2 X 16 sq. mm + 1 X 16 sq. mm earth wire
300
-
555
4 X 4 sq. mm + 1 X 4 sq. mm earth wire
500
-
406
4 X 6 sq. mm + 1 X 6 sq. mm earth wire
500
-
529
4 X 10 sq. mm + 2 X 10 sq. mm earth wire
500
-
670
4 X 16 sq. mm + 2 X 16 sq. mm earth wire
500
-
946
4 X 25 sq. mm + 2 X 16 sq. mm earth wire
1000
-
1250
Supplying and fixing following size/modules, GI box along with modular base and cover plate for modular switches in recess etc. as required.1 or 2 Module (75mm x 75mm)
56
-
243
3 Module (100mm x 75mm)
50
-
267
4 Module (125mm x 75mm)
50
-
287
6 Module (200mm x 75mm)
10
-
333
8 Module (125mm x 125mm)
5
-
383
12 Module (200mm x 150mm)
2
-
434
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module
56
-
114
3 Module
50
-
128
4 Module
50
-
138
6 Module
10
-
167
8 Module
5
-
196
12 Module
2
-
227
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required.5/6 amps switch
50
-
85
15/16 amp switch
50
-
132
3 pin 5/6 amp socket outlet
50
-
111
6 pin 15/16 amp socket outlet
10
-
175
Telephone socket outlet
25
-
119
TV antenna socket outlet
12
-
119
Bell Push
10
-
126
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
416
-
401
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
318
-
495
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.(Provided for AC Power Point)
70
-
639
Supplying and fixing call bell / buzzer suitable for single phase, 230 volts, complete as required.
10
-
92
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
100
-
342
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
131
-
32
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
102
-
203
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep
76
-
363
510 mm sweep
10
-
523
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.20 mm
250
-
146
25 mm
2610
-
165
32 mm
200
-
203
40 mm
100
-
292
50 mm
30
-
368
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
1000
-
84
25 mm
2000
-
90
32 mm
200
-
92
40 mm
100
-
130
50 mm
100
-
158
Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required.2 Pair
1620
-
20
4 Pair
810
-
29
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed PVC conduit as required.
1000
-
33
Supplying and fixing metal/ PVC box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.100 mm X 100 mm X 60 mm deep
40
-
160
150 mm X 150 mm X 60 mm deep
10
-
165
200 mm X 300 mm X 60 mm deep
10
-
387
DISTRIBUTION BOARD AND PANELS Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door
9
-
1760
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door
2
-
3068
6 way (4 + 18), Double door
2
-
3693
8 way (4 + 24), Double door
2
-
4601
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4 + 12), Double door
2
-
5651
8 way (4 + 24), Double door
6
-
7744
12 way (4 + 36), Double door
12
-
9828
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.For 6 way, Double door SPN MCBDB
6
-
629
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.
For 4 way, Double door TPN MCBDB
2
-
904
For 6 way, Double door TPN MCBDB
2
-
1062
For 8 way, Double door TPN MCBDB
2
-
1239
Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
20
-
764
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
756
-
199
Triple pole
29
-
820.3
Supplying and fixing single pole blanking plate in the existing
MCB DB complete etc. as required.
119
-
8
Supplying and fixing following rating, double pole, 240 V,
isolator in the existing MCB DB complete with connections,
testing and commissioning etc. as required.(63 A)
9
-
385
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(40 A)
4
-
832
63 A
10
-
839
100 A
12
-
1047
Supplying and fixing following rating, double pole, (single phase
and neutral), 240 V, residual current circuit breaker (RCCB),
having a sensitivity current 30 mA in the existing MCB DB
complete with connections, testing and commissioning etc. as
required.25 amps
6
-
1927
40 amps
18
-
2095
63 amps
45
-
2640
Supplying and fixing following rating, four pole, (three phase
and neutral), 415 volts, residual current circuit breaker (RCCB),
having a sensitivity current 30 mA in the existing MCB DB
complete with connections, testing and commissioning etc. as
required.40 amps
2
-
2626
63 amps
4
-
2777
Supplying and fixing DP sheet steel enclosure on surface/recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.
60
-
848
Supplying and fixing TPN sheet steel enclosure on surface/ recessed along with 25/32 A, 415 V “C” curve TPN MCB complete with connections, testing and commissioning etc. as required.
5
-
1146
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
15
-
1232
Supplying and fixing 30 amp, 415 Volts, TPN industrial type, socket outlet with 4 pole and earth, metal enclosed plug top along with 30 amps "C curve", TP , MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for socket outlet and complete with connections , testing commissioning etc. as required.
8
-
3048
Supplying, installation, testing and commissioning of cubical type MV Panel made out of 14 SWG CRCA sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switch gears (Floor Panel Light and Power).Meter and Distribution Panel For Shops INCOMER:-1 Nos. 630 Amps. 4P MCCB (36 KA) with electronic releases.1 Set phase indication lights (R, Y, B)1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.1 No. 0-630 Amp. Ammeter (digital type) with inbuilt ASS BUS BARS:-630 Amps. TP&N aluminium bus bars (36 KA)OUT GOINGS:-5 Nos 40Amp DP MCB with single Phase Electronic Energy meter in meter cubical 6 Nos.100 Amps. TPN MCB (25 KA) 6 Nos. 63A TPN, MCB (25KA).
2
-
450000
LIGHT FIXTURES & FANSSupply, installation, testing & commissioning of Recess mounted LED 2'x2' luminaire delivering an initial system lumen of 4300 lumens & the luminaire shall be with system efficacy ≥ 120 lm / W. Housing: CRCA, Optics: polycarbonate/PMMA/Polysterene, IP20 Protection. The operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.95, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Similar to Wipro Cat No.: CRCO10R036HP57HEG2 or equivalen
90
-
3246
Supply, installation, testing & commissioning of Recess Mounted Round Led Downlighter delivering minimum system lumen of 1650 lm & the luminaire shall be with system efficacy ≥ 110 lm / W. Housing: Die Cast Aluminium. IP40 , Optics: PMMA/Polysterene Diffuser. The operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.9, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacturer along with Photo Biological Safety Standard. Similar to Wipro Cat No.: LD06 15W or equivalent
125
-
1217
Supply, installation, testing & commissioning of surface/recessed Mounted Round Led Downlighter delivering minimum system lumen of 900 lm & the luminaire shall be with system efficacy ≥ 100 lm / W. Housing: Die Cast Aluminium. IP20 , Optics: PMMA/Polysterene Diffuser. The operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.9, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacturer along with Photo Biological Safety Standard. Similar to Wipro Cat No.: LD06-111-XXX-57WSM or equivalent
153
-
1148
Supply, installation, testing & commissioning of 4ft Linear LED luminaire delivering an initial system lumen of 4000 lumens &
the luminaire shall be with system efficacy ≥ 100 lm / W. The luminaire Housing shall be made of extruded Aluminium & the
diffuser shall be of polycarbonate/PMMA. The operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be with BIS
Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.95 , 50,000 Hrs LED Life with L70
Criteria, IP40. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire
shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED
manufacture along with Photo Biological Safety Standard. Similar to Wipro Cat No.: LL24-541-XXX-57-XX or equivalent
50
-
1600
Supply, installation, testing & commissioning of LED FLOOD Light Luminaire delivering minimum system lumen of 8000 lumens & the luminaire shall be with system efficacy ≥ 100lm/W. Housing: Die Cast Aluminium . IP66 , Optics: PC Reflector. The operating CCT shall be 5700K with CRI of ≥70. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.9, 50,000 Hrs LED Life with L70 Criteria.The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 4KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Similar to Wipro Cat No.: Alpha 80W or equivalent
100
-
5680
Supply, installation, testing & commissioning of Recessed Round Led Downlighter delivering an initial system lumen of 4100 lumens & the luminaire shall be with system efficacy ≥ 100 lm / W. Housing: Die Cast Aluminium. IP20 , Optics: Reflector with Glass . The operating CCT shall be 57000K with CRI ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , & PF ≥ 0.9, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be COB type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacturer along with Photo Biological Safety Standard. Similar to Wipro Cat No.: LD56-501-060-57-XX or equivalent
200
-
3825
Supply, installation, testing & commissioning of Recessed Round Led Downlighter delivering an initial system lumen of 2000
lumens & the luminaire shall be with system efficacy ≥ 100 lm / W. Housing: Die Cast Aluminium. IP20 , Optics: Reflector with
Glass . The operating CCT shall be 57000K with CRI ≥80. The luminaire shall be with BIS Registered electronic driver with input
voltage range of 150 to 270V , & PF ≥ 0.9, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be easily avaiable in India
for repair and service. The LED shall be COB type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall
be with following certifications: LM79 & LM80 issued by LED manufacturer along with Photo Biological Safety Standard.
Similar to Wipro Cat No.: LD56-251-060-57-XX or equivalent
180
-
3188
Supply, installation, testing & commissioning of (Mirror Light)2ft Linear LED luminaire delivering minimum system lumen of 900 lumens & the luminaire shall be with system efficacy ≥ 90 lm / W. The luminaire Housing shall be made of PC & the diffuser shall be of polycarbonate/PMMA. The operating CCT shall be 6500K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 20% & PF ≥ 0.95 , 50,000 Hrs LED Life with L70 Criteria, IP20. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Similar to Wipro Cat No.: LL20-111-XXX-65NE3 or equivalent
32
-
377
SITC of LED Wall bracket Luminaire with E27 base lamp holder suitable for LED bulb of wattage 12W with chrome lamp cup. Similar to Wipro LM91 or equivalent
50
-
1148
Supply, installation, testing & commissioning of 4ft Linear LED luminaire delivering an initial system lumen of 2000 lumens &
the luminaire shall be with system efficacy ≥ 100 lm / W. The luminaire Housing shall be made of extruded Aluminium & the
diffuser shall be of polycarbonate/PMMA. The operating CCT shall be 6500K with CRI of ≥80. The luminaire shall be with BIS
Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.95 , 50,000 Hrs LED Life with L70
Criteria, IP20. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire
shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED
manufacture along with Photo Biological Safety Standard. Similar to Wipro Cat No.: LL20-281-XXX-65AL5 or equivalent
50
-
510
Supply, installation, testing & commissioning of Bulk Head Luminare delivering an initial system lumen of 1000 lumens & the luminaire shall be with system efficacy ≥ 100 lm / W. Housing: Die Cast Aluminium. IP65 ,IK07 , Diffuser : OPAL Polycarbonate. The operating CCT shall be 5700K with CRI of ≥70. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.95, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2.5KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo
Biological Safety Standard. Similar to Wipro Cat No.: LW07-141-XXX-57-G1 or equivalent
76
-
1148
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
106
-
2688
Supplying, erection, connecting, testing and commissioning of 750 mm wall circulating fan complete in all respect including fixing wiring connection etc Similar to Havells Turbo Force
30
-
14560
Supply, installation, testing & Commissioning of non integral flexible LED strip light suitable for indoor applications. The strip shal be in 5m spools and shall be abe to cut at marked intervals to suit desired length.The wattage shall be 5W per metre. Similar to Wipro Cat No.: LS06-005-120-WH-50 + LG40-24 or equivalent
120
-
1565
Supply & Erection of following sizes of exhaust fan complete with louver, bird screen & with 3 core flexible wire as required. 300 mm 900 RPM (Single Phase)
66
-
4005
375 mm 900 RPM (Single Phase)
5
-
4741
450 mm 900 RPM (Single Phase)
5
-
6312
EARTHING-Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
5
-
5308
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
10
-
6216
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
1000
-
44
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
300
-
206
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
300
-
483
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
20
-
1844
Providing and fixing earth bus of 50 mm X 5 mm GI strip on surface for connections etc. as required.
20
-
412
Fire alarm & Public Address System Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per
specifications.Two Loop Panel.
1
-
238907
Supplying, installation, testing & commisssioning of intelligent addressable programmable loop powered sounder complete as required.
6
-
2638
Supplying, installation, testing & commissioning of addressable fire control module with inbuilt isolator or isolator module complete as required.
4
-
2990
Supplying, installation, testing & commissioning of addressable phone control module with inbuilt isolator or isolator module complete as required.
4
-
3255
Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector with inbuilt isolator or isolator base complete with base as required.
4
-
7801
Supplying, installation, testing & commissioning of addressable loop powered strobe complete as required.
4
-
3494
Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.
4
-
5727
Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.
4
-
1587
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector with inbuilt isolator or isolator base as per NFPA style 7 wiring complete with mounting base complete as required.
120
-
2846
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor with inbuilt isolator or isolator base as per NFPA Style 7 wiring complete with base as required.
30
-
2713
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
10
-
545
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.4 Zone
4
-
8468
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
1500
-
328
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.speaker cable Single pair, 2-core, 1.5 sqmm
1800
-
51
Supplying, installation, testing & commissioning of 6 zone, Digital EN-54 certifed voice alarm controller supportable 4 channel (including EN-54 certificated10 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation and shall be of same make as Fire Alarm Panel complete as required.
1
-
126399
Supplying, installation, testing & commissioning of 1.5/3/6W complete with metallic body and metalic grill celling speaker complete as required.
180
-
952
Supplying, installation, testing & commissioning of 1.5/3/6W metal box wall mount speakers complete as required.
20
-
1780
Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
1
-
145780
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
1
-
81743
FIRE HYDRANT & SPRINKLER SYSTEM - 1.NOC from fire authority shall be in the scope of Contractor . Only fee paid to the fire authority shall be reimbursed against the submission of the receipt and nothing shall be paid extra. 2. All the Fire Fighting works shall be done in compliance of Fire Fighting authority requirement. Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b)Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)Suitable cement concrete foundation duly plastered 2280 lpm at 56 m Head M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.
1
-
330204
2280 lpm at 56 m Head(diesel Pump)
1
-
607647
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 300 lpm at 56 m Head
1
-
114313
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
3
-
1508
Supplying and fixing Air Vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1
-
18009
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
4
-
1094
Air Release Valve, Gunmetal, having rubber ball with 1” (25mm) BSP Male threaded inlet
6
-
1876.55
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.150 mm. Dia
825
-
2376
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia
225
-
1499
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia
12
-
6454
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 80mm dia
1
-
10549
100mm dia
2
-
14428
150mm dia
6
-
22550
200mm dia
1
-
39133
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100mm dia
2
-
10836
150mm dia
2
-
17577
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.200mm dia
1
-
22052
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
1
-
1291
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal
6
-
7494
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal
12
-
5188
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m
6
-
8413
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal
6
-
2402
Fireman Axe-made of carbon steel with rubber insulated handle tested to 20,000 Volts as per IS:926 Make: NEWAGE
6
-
1423.59
Fire shaft door fabricated out of M.S. sheet and frame, door size of 1200 (W) x 2100 (h) with 4 mm thick glass, suitable Rubber beading and Locking arrangement and complete door shall be powder coated with red color powder coating
6
-
17613.67
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal
10
-
7494
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal
20
-
5188
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal
10
-
2402
FRP Hose Box single door (750X600X250) Make: Safex
10
-
5564.93
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way - 150 mm dia M.S. Pipe
2
-
13822
Providing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described below: Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand new seamless cylinder, as per IS: 7285 and CCE approval, fitted with Discharge hose and horn and wheel type valve with initial Charge as per IS: 15683:2018 specification, bearing ISI Mark & EIL approved. Make: SAFEX
10
-
10612.2
Co2 type Fire Extinguisher 6.5Kgs. Capacity, made from brand new seamless steel cylinder, as per IS: 7285 and CCE approval fitted with discharge, hose and horn with wheel type valve mounted on trolley wheels with initial charge as per IS: 16018 : 2012 specification, bearing ISI Mark & EIL approved. Make: SAFEX
10
-
15012.38
Co2 type Fire Extinguisher 9 Kgs. Capacity, made from brand new seamless steel cylinder, as per IS: 7285 and CCE approval fitted with discharge, hose and horn with wheel type valve mounted on trolley wheels with initial charge as per IS: 16018 : 2012 specification, bearing ISI Mark & EIL approved Make: SAFEX
10
-
17600.72
Dry Chemical Powder type 50 kgs. capacity Fire Extinguisher, Phosphate and Epoxy powder coated Bearing ISI Mark IS: 16018 : 2012 fitted with gunmetal cap, safety valve, hose with ABS squeeze grip nozzle, mounted on rubber tired wheels, initial charge of 50 kgs. Sodium – bi – carbonate base Dry Chemical Powder & fully charged Co2 cylinder. Dry Powder as per IS: 4308. Bearing ISI Mark: Co2 Cylinder approved by Explosives Dept. Extinguisher body as per IS: 2062. Gunmetal cap as per IS: 318. Valve as per IS 3224 Bearing ISI Marked. Siphon tube as per IS: 1239. Tested to 30 kgf/cm2 for 2 minutes
1
-
34942.61
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge.
12
-
841.21
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :Incomings
400/250A 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A Outgoings Main Fire Pump 200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.Jockey Pump 100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Diesel Engine Control Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications.
1
-
245730
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc 4 Core X 10 sqmm. Aluminium Armoured
175
-
176.88
3.5 Core, X 50 sqmm. Aluminium Armoured
165
-
393.08
3.5 Corex 240 sqmm. Aluminium Armoured
245
-
807.04
3.5 Corex 120 sqmm. Aluminium Armoured
135
-
1499.83
Supplying and making end termination with brass double compression gland and aluminium lugs for following size of XLPE insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. It should be complete as per specifications & directions of Engineer-in-charge. 4 Core X 10 sqmm. Aluminium Armoured
4
-
219
3 Core, X 50 sqmm. Aluminium Armoured
4
-
302
3.5 Corex 240 sqmm. Aluminium Armoured
4
-
480
3.5 Corex 120 sqmm. Aluminium Armoured
6
-
795
Supplying , installating, Testing & commissioning of XLPE insulated & PVC sheathed 1.1 KV grade armoured Copper control cables for various equipment through walls / ceilings with appropriate clamps / fixing arrangements and complete with termination as per manufacturer's specifications & as directed by Engineer-in-charge.6 C x 2.5 Sqmm
70
-
297.26
2 C x 4.0 Sqmm
65
-
176.88
2 C x 2.5 Sqmm
80
-
135.12
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm Conduit
30
-
165
32 mm Conduit
25
-
203
Supply, Installation ,Testing commissioning Single side Exit signage equivalent to Bajaj Model No. BESL 03LED SSD WBB
7
-
6904
Supply, Installation ,Testing commissioning Double side Exit signage equivalent to Bajaj Model No. BESL 03LED DSD WBB
2
-
6904
Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:-
a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules
used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and
suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE
insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as
required.
25
-
61060
Supply, laying and testing of undernoted sizes of aluminium conductor XLPE insulated PVC sheathed & sleeved armoured and overall PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification in ground (in existing trenches) through pipe or on wall / racks cable trays including dressing and clamping the cable with MS zinc passivated clamps etc. as required. 3.5 x 400 sq.mm
600
-
1682
3.5 x 300 sq.mm
700
-
1340
3.5 x 240 sq.mm
500
-
1109
3.5 x 185 sq.mm
800
-
899
3.5 x 150 sq.mm
800
-
738
3.5 x 120 sq.mm
1000
-
634
3.5 x 95 sq.mm
500
-
524
3.5 x 70 sq.mm
500
-
449
3.5 x 50 sq.mm
600
-
353
3.5 x 35 sq.mm
400
-
291
3.5 x 25 sq.mm
400
-
218
4 x 16 sq.mm
1500
-
182
4 x 10 sq.mm
1500
-
165
Laying of one number PVC insulated and PVC sheathed / XLPE
power cable of 1.1 KV grade of following size direct in ground
including excavation, sand cushioning, protective covering and
refilling the trench etc as required. Upto 35 sq. mm
3400
-
323
Above 35 sq. mm and upto 95 sq. mm
1600
-
338
Above 95 sq. mm and upto 185 sq. mm
2600
-
352
Above 185 sq. mm and upto 400 sq. mm
1800
-
396
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100mm dia
400
-
525
150 mm dia.
400
-
598
250mm dia
200
-
701
Supply and making end termination with brass double compression gland including providing and crimping of aluminium solderless lugs / ferrules for XLPE armoured power aluminium conductor cable 1.1 KV grade of following sizes:- 3.5 x 400 sq.mm
30
-
1209
3.5 x 300 sq.mm
60
-
936
3.5 x 240 sq.mm
20
-
809
3.5 x 185 sq.mm
20
-
702
3.5 x 150 sq.mm
50
-
555
3.5 x 120 sq.mm
50
-
489
3.5 x 95 sq.mm
20
-
473
3.5 x 70 sq.mm
40
-
368
3.5 x 50 sq.mm
20
-
329
3.5 x 35 sq.mm
20
-
300
3.5 x 25 sq.mm
20
-
250
4 x 16 sq.mm
30
-
250
4 x 10 sq.mm
200
-
219
Supply, laying, connecting, termination and testing of under noted sizes of flexible copper conductor flexible PVC sheathed & sleeved and overall PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification in ground (in existing trenches) through pipe or on wall / racks cable trays including dressing and clamping the cable with MS zinc passivated clamps etc. as required. 1 C x 70 sq.mm
10
-
749
1 C x 35 sq.mm
10
-
426
Supply, laying and testing of under noted sizes of copper conductor XLPE insulated PVC sheathed & sleeved armoured and overall PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification in ground (in existing trenches) through pipe or on wall / racks cable trays including dressing and clamping the cable with MS zinc passivated clamps etc. as required. 4 x 6 sq.mm
20
-
312
4 x 4 sq.mm
30
-
236
4 x 2.5 sq.mm
30
-
185
Supply and making end termination with brass double compression gland including providing and crimping of copper solderless lugs / ferrules for XLPE armoured power copper conductor cable 1.1 KV grade of following sizes:- 4 x 6 sq.mm
10
-
219
4 x 4 sq.mm
10
-
219
4 x 2.5 sq.mm
10
-
219
Supplying, laying, connecting,terminating, testing & commissioning of under noted sizes of PVC insulated, PVC sheathed unarmoured and overall PVC sleeved 1.1 KV grade control cables in pipe, wall, racks, cable trays, including, dressing, clamping with M.S Zinc passivated clamps etc as required conforming to relevant IS code and technical specifications. 8C x 1.5 sq.mm
50
-
185
10C x 1.5 sq.mm
50
-
213
14C x 1.5 sq.mm
50
-
275
Supply and fixing of cable tray/steel work in position including clamps, frame work of flats, angle iron, channel with fabrication work including cutting, bending, welding, drilling bolting etc. as per design as required. One coat of primer and 2 coats of enamel paint of approved shade shall be provided.
500
-
95
Supply and fixing of perforated 2mm thick CRCA sheet steel power coated cable tray of following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. including providing and fixing of M.S. painted hanger etc. as required. 150mm wide 50 mm depth
50
-
531
300mm wide 62.5mm depth
100
-
599
450mm wide 62.5mm depth
100
-
778
600mm wide 75mm depth
100
-
1000
900mm wide 75mm depth
100
-
1184
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
20
-
383
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width x 50 mm depth x 1.6 mm thickness
200
-
644
300 mm width x 50 mm depth x 1.6 mm thickness
250
-
875
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness
30
-
1168
300 mm width X 50 mm depth X 1.6 mm thickness
30
-
1713
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Tee” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness
10
-
1274
300 mm width X 50 mm depth X 1.6 mm thickness
10
-
1997
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Cross member” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness
5
-
1274
300 mm width X 50 mm depth X 1.6 mm thickness
5
-
2194
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness
4
-
1778
300 mm width X 50 mm depth X 1.6 mm thickness
4
-
2618
Supply, Installation testing and commissioning of MS powder coated , metallic adaptable raceway system in floor, passing through walls, ceiling as required, single sections of required sizes as per drawing. of below mentioned sizes , suitable for FRLS wires/unarmoured cables and extra low voltage cables for modular furnetur along with Z- section, hole with thread for cover screw, coupler plate, cover, fly cover, supports etc. as required but excluding the cost of junction box. 150 mm x 40 mm x 1.6 mm
40
-
519
200 mm x 40 mm x 1.6 mm
20
-
584
300 mm x 40 mm x 2 mm
10
-
770
Fabricating Installation testing and commissioning 2 mm thick M.S. powder coated, sheet steel 5 sided junction boxes along with 3 mm thick GI sheet steel cover, rubber gasket between the cover and the junction box, steel screws and all other accessories complete as required. Junction box suitable for 150 mm x 40 mm x 1.6 mm raceway
50
-
674
Junction box suitable for 200 mm x 40 mm x 1.6 mm raceway
50
-
830
Junction box suitable for 300 mm x 40 mm x 1.6 mm raceway
50
-
1036
SUBSTATION EARTHING-Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
20
-
5308
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
20
-
6216
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
20
-
11794
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
1000
-
44
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
750
-
206
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
350
-
483
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
200
-
1224
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
200
-
1009
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
20
-
1844
Providing and fixing earth bus of 50 mm X 5 mm GI strip on surface for connections etc. as required.
20
-
412
Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required. 200 Amps
2
-
7742
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
4
-
448
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
250
-
104
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
150
-
163
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
4
-
102
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
50
-
109
120 mm dia (OD-120 mm & ID-103 mm nominal)
50
-
240
200 mm dia (OD-200 mm & ID-175 mm nominal)
40
-
498
Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.
150
-
546
Providing, laying and fixing following dia RCC pipe NP2 classn (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required. 100 mm dia
50
-
525
150 mm dia
50
-
598
250 mm dia
50
-
701
300 mm dia
50
-
854
Providing, laying and fixing following dia G.I. pipe (medium
class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 50 mm dia
20
-
536
80 mm dia
20
-
803
100 mm dia
20
-
1113
150 mm dia
20
-
1687
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size(60X60 cm)
10
-
8634
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
22983
Supply and fixing of cable tray/steel work in position including clamps, frame work of flats, angle iron, channel with fabrication work including cutting, bending, welding, drilling bolting etc. as per design as required. One coat of primer and 2 coats of enamel paint of approved shade shall be provided.
1000
-
95
SUBSTATION WORKS Main L.T. PANELS Supply, erection, testing & commissioning of IP -54 cubicle type Panel fabricated (folded joints construction) out of 14 SWG CRCA sheet steel floor mounted totally enclosed extendable on both sides switchboard of uniform width with top cable entry and suitable for use on 415 V 3 phase 4 wire 50 c/s having 50 KA fault capacity complete and housed with incomming and outgoing aluminium bus-bars,interconnection between feeders etc. and their accessories including supply and fixing of base channels of 100x50x6mm as required with provision for following incoming and outgoing switchgear with protection, metering etc. and terminals for scheduled cables and also compataible to PC/PLC/BMS with communiction port RS-485, complete as required and as per specification and schematic diagram complete as required.INCOMERS- TRANSFORMER INCOMER [2 No.] shall be equipped as: (2000 KVA) 1 No. 4000 A, 50KA FP, draw out type electrically operated air circuit breaker with 230 V A.C. spring charged motor and micro processor based O/C, S/C & E/F releases. 1 No. 24V D.C. shunt release 1 No. 230V A.C. closing coil 1 No. 230V A.C. under voltage & over Voltage release alongwith set of timers. 1 No. Multifunction meters with all parameters, communication through RS 485 port compatible with PLC/PC/BMS. 3 nos. CTs 4000/5A , 15 VA , Class - 1 for metering, with 50 KA Short circuit rating 1 Set CTs 4000/5A , 15 VA , Class - 1 for power factor, for metering, with 50 KA Short circuit rating 1 Set SURGE PROTECTION DEVICE/RELAY with associated accessories 1 Set Breaker Control Switch. ( TNC ) 1 Set Auto-Off- Manual Switch 1 Set push buttons 1 no Master trip relay 1 Set Potential Transformer. 1 Set of 24 V DC power pack unit VISUAL INDICATION Phases Breaker ON-OFF-TRIP, breaker in service, control ckt healthy (AC) & control ckt healthy (24V DC) Spring charged/discharged Breaker in Test Position. DG SETS INCOMER [1 No.] shall be equipped as: {2 Nos 750 KVA} 1 No. 1250 A, 50KA FP, draw out type electrically operated air circuit breaker with 230 V A.C. spring charged motor and micro processor based O/C, S/C & E/F releases.1 No. 24V D.C. shunt release 1 No. 230V A.C. closing coil 1 No. 230V A.C. under voltage & over Voltage release alongwith set of timers. 1 No. Multifunction meters with all parameters, communication through RS 485 port compatible with PLC/PC/BMS. 3 nos. CTs1250/5A , 15 VA , Class - 1 for metering, with 50 KA Short circuit rating 1 Set SURGE PROTECTION DEVICE/RELAY with associated accessories 1 Set Breaker Control Switch. ( TNC ) 1 Set Auto-Off- Manual Switch 1 Set push buttons 1 no Master trip relay 1 Set Potential Transformer. 1 Set of 24 V DC power pack unit VISUAL INDICATION Phases Breaker ON-OFF-TRIP, breaker in service, control ckt healthy (AC) & control ckt healthy (24V DC) Spring charged/discharged Breaker in Test Position. SOLAR PV (Total Capacity 25 KWp) INCOMER [1 Nos.] each shall be equipped as: 1 Nos. 160 A FP MCCB , 50 KA, with M.R.,O/C, S/C & E/F releases & indicating lamps (R.Y.B. Phase indication with ON/OFF & Trip Indication) , Multifunction meter and import/export meter aprroved from electricity board with all functions with set of CTs etc. with communication port through RS-485 compatible with PLC/PC/BMS. Bus Bar 5000 A,65 KA,electrolytic aluminium TPN bus bars complete as required as per SLD. BUS COUPLER:- 1 No. 4000A ,50KA, 4POLE ,EDO ACB with 230 V A.C. spring charged motor. 1 sets Breaker Control switch 1 Sets of phase indication lights R,Y,B. 1 sets of ON-OFF-TRIP ckt. Healthy. indication lights Interlocking: Transformer incomers,DG Set incommer and bus couplers shall be electrically and mechanically interlocked so that no different source can be paralled at any point of time.6 No. 1600A FP EDO ACB , 50KA, with M.R.,O/C, S/C & E/F releases & indicating lamps (R.Y.B. Phase indication with ON/OFF & Trip Indication) & Multifunction meter with all functions with set of CTs etc. with communication port through RS-485 compatible with PLC/PC/BMS. 4 No. 630A FP MCCB , 50KA, with M.R.,O/C, S/C & E/F releases & indicating lamps (R.Y.B. Phase indication with ON/OFF & Trip Indication) & Multifunction meter with all functions with set of CTs etc. with communication port through RS-485 compatible with PLC/PC/BMS. 6 No. 400A FP MCCB , 50KA, with M.R.,O/C, S/C & E/F releases & indicating lamps (R.Y.B. Phase indication with ON/OFF & Trip Indication) & Multifunction meter with all functions with set of CTs etc. with communication port through RS-485 compatible with PLC/PC/BMS. 2 No. 250A FP MCCB , 50KA, with M.R.,O/C, S/C & E/F releases & indicating lamps (R.Y.B. Phase indication with ON/OFF & Trip Indication) & Multifunction meter with all functions with set of CTs etc. with communication port through RS-485 compatible with PLC/PC/BMS. 6 Nos. 100 A FP MCCB , 50KA, with M.R.,O/C, S/C & E/F releases & indicating lamps (R.Y.B. Phase indication with ON/OFF & Trip Indication) & Multifunction meter with all functions with set of CTs etc. with communication port through RS-485 compatible with PLC/PC/BMS. PLC Operations PLC system for Auto mains failure, Auto Load Sharing Management, with Auto Synchronization (For 2 Nos Transformer + 2 Nos.DG Sets + 1 No. Solar Power Panel)
1
-
7585315
(AUTOMATIC POWER FACTOR CORRECTION PANEL) APFC PANEL Supplying, installation, testing and commissioning of free standing, front operated cubical type capacitor control panel with aluminium bus bars of current density 0.8Amps/sq.mm.& rupturing capacity(50KA), LED indicating lamps interconnections with under noted switch gears as per technical specifications and drawings complete as required. All MCCB shall have rotary operating handles. (capacitor control panel) 900 kvar capacitor control panel 1 No.1600A ,TPN ,50KA,MDO ACB with releases for O/C,S/C&E/F.protection.. 1 No. Ammeter (digital type) with inbuilt ASS 1 No.Volt Meter (digital type) with inbuilt VSS & control fuses. 1 No.12 step A.P.F.C.Relay (intelligent micro-processor based with current sensitivity less than 1%) 3 Nos. CTs- 1600/5 Amps. Cl-1 1 Set phase indication lights (R, Y, B) 1600 Amps. TP&N aluminium bus bars (50 KA) 3 No.200Amps. TPN MCCB(50 KA) with electronic releases. 9 No.100 Amps. TPN MCCB(50 KA) with electronic releases. 3 No. 120 KVAR TP Shunt capacitor Heavy duty MPP type with discharge resistor and 7% D-tuned Harmonic reactor filter 9 No. 60 KVAR TP Shunt capacitor Heavy duty MPP type with discharge resistor and 7% D-tuned Harmonic reactor filter 3 No.240 Amps. TP capacitor duty contactors. 9 No. 120 Amps. TP capacitor duty contactors. 1 No. Auto-Off-Manual selector switch. 12 Sets self illuminated Red-Green ON-OFF push buttons. 2 Sets of Axial flow fans with thermostate.
1
-
2140188
Supplying, installing by suspension on ceiling, testing and commissioning of following capacity outdoor type IP-65, Sandwich Type Bus Trunking for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with oudoor 1.2 mm GI sheet canopy, 4 Nos aluminium bus bars, necessary joints, elbow joints & expansion joints and bends, fire barrier, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required(IP 65) 5000 amps 150 KA SC for 1 sec
20
-
67285
Supply, erection, testing & commissioning of 230 V, single phase, 2 wire, A.C. to 24V D.C. 180 AH sealed maintenance free batteries with semiconductor/ IGBT (half wave rectifier) with auto-manual trickle boost facility battery charging units complete including 1 No. Distribution board having 63 Amps DP MCB incomer and 12 No. 16/ 20 Amps DP MCBs (D.C. duty) as outgoing complete as required as per technical specifications.
1
-
140016
Supplying and fixing of non-skid rubber mat 25mm thick and 900mm width as required including cutting to required lengths of approved make with Test Certificates for H.T. 11 KV panels.
2
-
2562
Supplying and fixing of non-skid rubber mat 16mm thick and 900mm width as required including cutting to required lengths of approved make with Test Certificates for L.T. panels.
8
-
1209
Supplying and fixing of fire bucket painted red and duly filled with sand conforming to IS: 2546-1974.
4
-
758
Supplying and fixing of MS stand suitable for supporting two buckets (Pedestal type)
1
-
1037
Supplying and fixing of MS stand suitable for supporting four buckets (Pedestal type)
1
-
1538
Supplying and fixing of shock restoration chart written in English and Hindi duly framed in as required.
1
-
823
Supplying and fixing of carbon dioxide fire extinguisher type 4 kgs. Capacity of approved make with wall mounting bracket as required conforming to IS: 2878/1976 (Push type).
6
-
5524
Supplying and fixing of first aid box as approved complete with standard kit as prescribed by Indian Red Cross.
1
-
565
Supply and fixing of H.T. Danger notice plate of 250x200mm made of mild steel at least 2mm thick and vitreous enameled white on both side with inscription in signal red colour on front side as required.
4
-
163
Providing, Installing, Testing and Commissioning of ‘Silent Type’ Diesel Generating set alongwith having Prime Power Rating of following KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor and consisting of the followings: Diesel Engine
Diesel engine 4 stroke water cooled, selectric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories.Engine mounted Instrument Panel fitted with and having digital display for following: (i) Start-stop switch with key (ii) Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v) Battery charging indication (vi) RPM indication (vii) Over speed indication (viii) Low lub. Oil trip indication (ix) Engine Hours indication Alternator
Synchronous alternator rated at following KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class- F/H insulation. Base Frame & Foundation:
Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer.Fuel Tank:
Daily service fuel tank of 990 liters capacity fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. Exhaust System:
Dry exhaust mainfold with hospital exhaust silencer and catalytic convertor. 12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (25 plates, 180 Amp. Hour capacity lead acid type) as required as per specifications. Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications. Fabricating, Installing, Testing & Commissioning of automatic mains failure control including auto by-pass panel, suitable for following KVA silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all complete and inter locking including the following: Auto/Manual/Test/Off selector switch Emergency push buttons Suitable CTs Energy analyser unit to indicate current voltage frequency power factor and KWH Indicating lamps for load on mains and load on set Fuse for instruments Battery charger, complete with transformer/ rectifier, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment. Main supply failure monitor Supply failure timer Restoration timer Control unit with three impulse automatic engine start/stop and failure to start lockout. Impulse counter with locking and reset facility. ON/OFF/Control circuit switch with indicatorAudio/Video annunciation for (i) High water temperature (ii) Low lubricating oil pressure (iii) Engine over speed (iv) Engine fails to start (v) Full load/maximum load warning Supplying and fixing exhaust gas piping of suitable dia. welded black MS, B Class pipe conforming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with mineral wool/Rockwool,50 mm thick wiremesh & aluminum cladding etc., as required as per specifications. 750 KVA
1
-
7556533.84
Supplying, installation, testing and commissioning of L.T. panel fully compartmentalized cubical type sheet clad floor mounted totally enclosed , extensible on both sides, switch board suitable for use on 415 Volts 3-phase, 4 wire, 50 Hz system having required fault capacity, housed with incoming and outgoing, Aluminium bus bars with current rating of 0.8 Amp/sq.mm, interconnection etc. with indication lamps, accessories etc, as required as per specification and schematic diagram as required. (Street lighting Panel) INCOMER:-1 Nos.100 Amps. TPN MCCB(25 KA) with electronic releases.1 Set phase indication lights (R, Y, B) 1 No. Volt Meter (digital type) with inbuilt VSS & control fuses. 1 No. 0-200 Amp. Ammeter (digital type) with inbuilt ASS BUS BARS:- 200 Amps. TP&N Aluminium bus bars (25 KA) OUT GOINGS:- 10 Nos. 32A TPN, MCB (10KA). 6 Nos. 24 Hr Timer Switch 6 Nos. 32A TPN contactor
4
-
111131
Supply, installation, testing & commissioning of post top Luminaire along with 4m pole delivering minimum system lumen of 3325 lumens & the luminaire shall be with system efficacy ≥ 95lm/W. The Luminaire Housing: Die Cast Aluminium . IP66 , Optics: Acrylic Clear Diffuser. The operating CCT shall be 5700K with CRI of ≥70. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.9, 50,000 Hrs LED Life with L70 Criteria.The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 4KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Similar to Wipro Cat No.:LP07-431-XXX-57-CL or equivalent
40
-
20316
Supply, installation, testing and commissioning of 800mm long IP65 LED Bollard with dark grey pure polyester powder coated Aluminium extruded housing, and specially designed injection moulded seamless asymmetric PC diffuser to have 20 Bollard download asymmetrical distribution with more light on walkways/pathways and suffecient light all around. The have a CCT of 6500K with System Wattage of 11 W with minimum system lumen of 565lm. The LEDs shall be LM80 Compliant with TM21 report for life of 50000 hrs @L70 criteria and CRI 70.The Driver shall be IP65 potted driver having rated voltage range of 230V,Surge protection 2kV.Similar to Wipro Cat No.: LB12-131-XXX-65-08 or equivalent
160
-
7399
Supply, installation, testing & commissioning of 8W LED Bush LIGHT luminaire with compact, aesthetic, pure polyester powder coated Die cast Aluminium housing and in built electronic driver with 2kV surge protection, high efficiency COB LED mounted on black anodised aluminium heat sink for effective heat dissipation. The luminaire shall be front maintainable with vandal resistant toughened glass giving access to driver and the same shall have special high efficiency optical grade UV stabilized engineering plastic reflector, Beam Angle 36°, with a nominal system lumen output of 600 lumens , Power factor 0.9 or higher and CCT 2700k. The luminaire shall meet IP67 rating and shall be along with directional shield and earth spike in die cast Aluminium. Similar to WIPRO LF05-600-036-27-XX or equivalent.
200
-
3602
Supply Installation Testing Commissioning of IP 65 LED Step Light with all fixing arrangement and copper wiring Equivalent to Philips cat no. BWG 150 LED 50
100
-
6627
Supply, installation, testing & commissioning of LED FLOOD Light Luminaire delivering minimum system lumen of 8000 lumens & the luminaire shall be with system efficacy ≥ 100lm/W. Housing: Die Cast Aluminium . IP66 , Optics: PC Reflector. The operating CCT shall be 5700K with CRI of ≥70. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.9, 50,000 Hrs LED Life with L70 Criteria.The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 4KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Similar to Wipro Cat No.: Alpha 80W or equivalent
100
-
5700
Supply Installation Testing Commissioning of LED based Street light, housing made up of Pressure Die Cast Housing LM 6 Alloy/ Anti Dust Exposed Lens,sturdiness and embossed brand name/logo name of manufacturer. The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of 16000 lumens and maximum system wattage of 140Watts.The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK =08.The fixture driver should have an operating voltage range of 140-270 V, surge protection of =3KV, PF 0.9 , THD10% and SDCM5. The fixture should be top openable & easy access to the Gear Compartment. The driver should be BIS approved, fully potted and encapsulated with 440V Stress Voltage protection for 8 Hrs. High Cut off : 325V(+/- 15V) and Auto Restart function should also be available within the fixture.The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to Philips CAT No. - BRP340 including providing copper wire and connection.
14
-
7080
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. 4.0 metre and upto 6.5 metre
40
-
4492
Supply and erection of 8 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, made of 3 mm thick sheet along with base plate of size 260 X 260 X 16 mm , small door opening for junction box mounting with MCB & connector, cement concrete of 1:3:6 including excavation, refilling and suitable size foundation bolts with template and all complete job as
required. Single arm, 1500 mm
10
-
24181
Double arm, 1500 mm
2
-
25656
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
500
-
200
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal)
640
-
249
120 mm dia (OD-120 mm & ID-103 mm nominal)
200
-
341
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 80 mm dia
100
-
803
100 mm dia
100
-
1113
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
4
-
5308
Supply, laying and testing of undernoted sizes of aluminium conductor XLPE insulated PVC sheathed & sleeved armoured and overall PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification in ground (in existing trenches) through pipe or on wall / racks cable trays including dressing and clamping the cable with MS zinc passivated clamps etc. as required. 3.5 x 70 sq.mm
500
-
449
4 x 16 sq.mm
500
-
182
4 x 10 sq.mm
2500
-
165
4 x 6 sq.mm
3000
-
141
Supply and making end termination with brass double compression gland including providing and crimping of aluminium solderless lugs / ferrules for XLPE armoured power aluminium conductor cable 1.1 KV grade of following sizes:- 3.5 x 70 sq.mm
10
-
368
4 x 16 sq.mm
50
-
250
4 x 10 sq.mm
100
-
219
4 x 6 sq.mm
400
-
219
Supplying and fixing of polyester (SMC) 160x160x90 mm street lighting junction box with hinged cover of approved design complete with 8 way 63A elmex connector with din rail mounting plate, assembly kit for looking the cables and connection of luminaries, one no.16A SP MCB (10 KA) including painting and connecting the cable etc. as required as per HENSEL or as approved.
50
-
4000
SITC of 2 MP , 20X Zoom Speed Dome Camera PTZ Camera 1/2.8" progressive scan CMOS Up to 1920 x 1080 resolution, 30fps 20x optical zoom (5.2~104mm) Ultra 265,H.265,ONVIF Smart IR, up to 150m IR distance All-weather design Alarm I/O,Audio I/O AC24V,DC24V,9~42W IP66, PoE.
7
-
68036
SITC of IP CCTV : IP DOME (Indoor): 2 Megapixel H.265/H.264 / MJPEG Compression, 1/2.7" Cmos, 2.8 - 12mm Varifocal Lens, upto 30,rest all features of IP camera such as Multi Streaming, Image Snapshot, Full Screen Monitoring, Supports CBR & VBR, Online Users upto 6, Video Format in AVI & JPEG, Supports Video Playback IP address filtering, video mask, password protection. ONVIF Support. IP67 & IK10 Protection Rating. Supports POE.
25
-
16322
SITC of IP CCTV IP BULLET (Outdoor): 2 Megapixel H.265/H.264 / MJPEG Compression, 1/2.7" Cmos, 2.8 - 12mm Varifocal Lens, upto 30,rest all features of IP camera such as Multi Streaming, Image Snapshot, Full Screen Monitoring, Supports CBR & VBR, Online Users upto 6, Video Format in AVI & JPEG, Supports Video Playback IP address filtering, video mask, password protection. ONVIF Support. IP67 & IK10 Protection Rating. Supports POE.
10
-
18702
SITC of NVR For Main Control Rooms- H.264 / MPEG4 decoding. -32 Channel IP cameras inputs, 1 Video out @ VGA(1080P), 1 HDMI out (1080P). Real-time Display & Playback, Recording Mode in Manual, Schedule & Alarm, Recording & Playback Up to 720P @ PAL per CH, 8x SATA HDD port, 8 alarm input & 1 output, Network ethernet Interface supports 10/100/1000, Multi-Remote Client upto 4, backup by USB, DVD-WR, With remote control. PS2 interface for mouse. Supports DDNS, PTZ Control, RS-485, Digital Zoom, Motion Detection, Video Loss, Alarm recording, Buzzer, Each Channel Backup, Password Control, Firmware Update and Mobile applications. Power- 12VDC. etc. all complete.
2
-
98893
SITC of Special Surveillance 4TB 3.5" SATA HDD internal etc. all complete.
8
-
13035
SITC of RJ-45 outlets near the cameras etc. all complete. etc. all complete.
42
-
540
SITC of 43" LCD narrow Bazel for Monitoring for each NVR Server etc. all complete.
2
-
62339
SITC of 20 U RACK STANDARD RACK with ventilation, sliding shelves, power strips, etc. all complete.
2
-
20969
SITC of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments: 24 Port 10/100 Mbps Switch, Rack Mountable etc. all complete.
2
-
96342
SITC of Cat6 Unarmoured Cable for POE purpose. Ethernet speed with frequency upto 250 MHz. Max cable length of 90 meters (Quantity in running Meter) etc. all complete.
Approved Makes : Siemon, Corning, Actassi, Panduit
4000
-
52
SITC of armoured optical fiber 6 core cable for switch to switch and camera connectivity.
500
-
110
Incinerator Oil Fired Dual chamber Incinerator, Auto feeding system Air Pollution Control Device, Combustion Fan, Control Panel ,Chimney Model RE-2200 DS
1
-
2428550
Artistic Illumination of temple Complex Supply,Installation,Testing and Commissioning of LEDRGB/RGBW flood lighting luminaire for facade lighting with Die-cast aluminium housing , powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/ Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage with out any separate power supply from 100-270V AC, 50 Hz with power factor 0.9. Fixture shall be suitable to operate at anambient temperature range of-10°C to +50°C and shall be IP65 and IK06 rated. Life time shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, waterproof connectors etc. as required 45 W/40 W
120
-
32652
30 W
60
-
17553
Supply, Installation, Testing and Commissioning of LED RGB/ RGBW Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage. Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX/ Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage with out any separate power supply from 100 to 270 VAC, 50Hz, power factor 0.9. Fixture shall be suitable tooper at eat ambient temperature range of-10° C to +50° C and shall be IP65 and IK06 rated. Life time should be atleast L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required40 W
30
-
34239
25 W
30
-
20281
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements