Tripura Tourism Development Corporation Limited Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Costs
EMD
₹ 7,13,175Document Cost
₹ 8,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_TTDC_30390_1Bid Award Id
ViewTender No
92/MD/TTDCL/ASI-UnakotiTender Authority
Tripura Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://http://tripuratourism.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Tender document on Conservation and development works under SD - II sanctioned by Ministry of Tourism, Government of India in ASI protected areas in Tripura - Unakoti (2nd Call)
Notice Inviting Tender of Conservation and development works under SD - II sanctioned by Ministry of Tourism, Government of India in ASI protected areas in Tripura - Unakoti (2nd Call)
BoQ on Conservation and development works under SD - II sanctioned by Ministry of Tourism, Government of India in ASI protected areas in Tripura - Unakoti (2nd Call)
BOQ Items
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-
-
-
All kinds of soil
2205.43
-
134.9
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
All kinds of soil
340.72
-
169.5
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
-
-
-
All kinds of soil
680.45
-
120.3
Extra for additional lift of 1.5m or part thereof.
8
-
49.8
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
204.08
-
887.5
ANTITERMITE TRAEMENT
-
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
Chlorpyriphos/Lindane emulsifiable concentrate of 20%
147.59
-
212.1
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment as per IS: 6313 (Part III)- Latest revision (excluding the cost of chemical emulsion):
-
-
-
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.
-
-
-
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
168.48
-
17.1
Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling:
-
-
-
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
226.92
-
94.9
SUB-HEAD : CEMENT CONCRETE WORK
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level:
-
-
-
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
36.91
-
10456.6
1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
269.43
-
9872.1
Providing and laying cement concrete in retaining walls, return walls (any thick-ness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. upto floor five level, excluding the cost of centring shuttering and finishing -
-
-
-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
aggregate 20 mm nominal size)
100.69
-
11874.5
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
Foundations, footings, bases for columns.
167.34
-
238.6
including attached pilasters, but-tresses plinth and
string courses fillets etc.
136.91
-
308.4
Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm/20mm nominal size).
-
-
-
D.P.C. 40 mm thick
73.44
-
445.9
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification
18.69
-
61.5
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
101.54
-
810.5
SUB-HEAD : Reinforced Cement Concrete Work
-
-
-
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement -All work upto plinth level:
-
-
-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
109.34
-
10974.6
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-
-
-
-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
198.52
-
11791.9
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-
-
-
-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
102.91
-
12104.7
Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with
-
-
-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
60.65
-
12430.1
Centering shuttering including struttings, propping etc.
-
-
-
Foundations, footings, bases for columns etc. for mass concrete with timber plank
322.59
-
268.9
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
804.26
-
370
Suspended floors, roofs, landings, balconies and access platform with timber planks
851.54
-
464.3
Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank
857.5
-
317.7
Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
518.11
-
483
Stairs (excluding landings) except spiral-staircases with wooden plank
94.28
-
477.8
Extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at alllevels, over a height of 3.5 m, for every additional height of 1 metre or part thereof Suspended floors, roofs, landing, beams and balconies (Plan area to be measured).
356.1
-
214.2
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars
55238.1
-
78.2
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.
-
-
-
Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars
42094.66
-
78.2
SUB-HEAD : BRICK WORK
-
-
-
First class brick work in foundation and plinth including cost of all materials as required complete.
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
50.01
-
8888.4
First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete.
-
-
-
In cement mortar 1:6 ( 1 cement : 6 fine sand ).
127.45
-
9859.7
Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
77.36
-
1187.9
Half brick masonry with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
219.01
-
1363.1
Sub-Head: Marble & Granite Work
-
-
-
Providing and fixing gang saw cut of approved thickness mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, windows sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 (1 cemebnt : 4 fine sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, inlcuding rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels:-
-
-
-
14 mm thick Rajnagar Plain white marble/ Udaipur green marble/ Zebra black marble or equivalent duly approved:-
-
-
-
Area of slab over 0.50 sqm.
Page No. 57
27.63
-
3211.8
Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-Charge:-
-
-
-
14 mm thick Granite work.
40.65
-
228.5
SUB-HEAD : WOOD WORK
-
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :
-
-
-
Local Teak wood
0.88
-
87719.7
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
38.22
-
1786.6
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.Fixed to steel windows by welding.
-
-
-
Fixed to openings /wooden frames with rawl plugs screws etc.
962.69
-
126.4
Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size)
187.1
-
162.4
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete
-
-
-
125 × 65 × 2.12 mm
136
-
41.5
Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.
Page No. 59,97,136
24
-
1094.5
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
300 x 16 mm
17
-
259.9
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
250 x 10 mm
34
-
104.9
100x10 mm
22
-
66.5
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
125 mm
48
-
64.7
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
-
-
-
Twin rubber stopper
24
-
61.8
Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws.
54.45
-
468.8
Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter).
33.84
-
3094.4
Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive.
11.76
-
704.6
SUB-HEAD : STEEL WORK
-
-
-
Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.
17
-
146.2
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-
-
-
-
In stringers, treads, landing etc. of stair cases including use of chequered plate wherever required, all complete.
1224.27
-
95.4
Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:-
-
-
-
M.S. tube
674.67
-
121.4
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
188.83
-
532.7
SUB-HEAD : FLOORING
-
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
290.61
-
792
Providing and laying 1st quality ceramic glazed floor tiles of approved size conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades as approved by Engineer-in-charge over 20 mm thick bed of cement mortar 1 : 4 (1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
-
-
-
Anti-Skid Tiles
-
-
-
Ceramic Glazed Tiles 1st quality 300 x 300mm in all shades and designs
174.67
-
841.2
Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 % and conforming to IS : 15622 of approved make in all colours, shades over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
-
-
-
Double charged Stainfree vitrified tiles
-
-
-
Size of tile 60x60 cm
386.57
-
1118.2
Providing and laying Vitrified tiles in different es(thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
Double charged Stainfree vitrified tiles
-
-
-
Size of tile 60x60 cm
150.44
-
1178.5
Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer- in -charge.
83.11
-
573.6
SUB-HEAD : ROOFING WORK
-
-
-
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 fine sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand) and finished neat complete
513.1
-
462.8
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre,one flange fixed to the ceiling with dash fastener 12.5 mm dia x50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings,grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
12.5 mm thick tapered edge gypsum moisture resistant board
228.14
-
1025.4
SUB-HEAD : FINISHING WORK
-
-
-
12 mm cement plaster of mix
-
-
-
In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
1477.36
-
174.8
In cement mortar 1 : 6 ( 1 cement : 6 fine sand )
1127.94
-
159.6
15 mm cement plaster on the rough side of single or half brick wall of mix:
-
-
-
In cement mortar 1 : 6 ( 1 cement : 6 fine sand )
553.85
-
185.3
6 mm cement plaster of mix:
-
-
-
In cement mortar 1 : 3 ( 1 cement : 3 fine sand )
588.89
-
144.5
Neat cement punning.
302.65
-
45.1
Extra for plastering done on moulding cornices or architraves including neat finish to line and level.
-
-
-
In two layer
1620.04
-
517.1
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1897.19
-
101.6
Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
-
-
-
New work ( two or more coats) over and including water
thinnable priming coat with cement primer.
1701.84
-
95.7
Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.43 litre/10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
-
-
-
New work ( two or more coats applied @ 1.43 litre/10 sqm
over and including priming coat of exterior primer
applied @ 2.20 kg/10 sqm)
1066.51
-
119.3
Applying priming coat: [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
-
-
-
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron / steel work.
24.36
-
31.7
Painting on wood work with oil type wood preservative ( two or more coats) of approved brand and manufacture on new work complete.
-
-
-
New work (two or more coats)
48.3
-
34.7
Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade.[Payment shall be made after submission of Test Certificate issued by the Manufacturer]
-
-
-
Two or more coats on new work
163.44
-
82.8
SUB-HEAD : ALUMINIUM WORK
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-
-
-
-
For fixed portion of approved quality:-
-
-
-
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
352.78
-
400.2
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):-
-
-
-
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
329.17
-
471.6
Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board grade-I, type II conforming to IS : 12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P. brass / stainless steel screws all complete as per architectural drawing and the direction of Engineer-in-charge :-
-
-
-
Prelaminated particle board of approved quality with decorative lamination on both side.
4.48
-
1309.9
Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-
-
-
-
With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )
46.24
-
1058.2
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embrossed on the body / plate with double spring mechanism and door weight upto 125 kg. for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the sting floor finishing and cover plates with brass pivot and single piece MS sheet outer box with slide plate etc. complete as per direction of the Engineer-in-charge:-
-
-
-
With stainless steel cover plate minimum 1.25 mm thickness
6
-
2391.4
Filling the gap in between aluminium frame and adjacent RCC/brick work by providing weather silicon sealant over backer rod of approved quality etc. complete as per architectural drawing and direction of the Engineer-in charge:- (i) Upto 5 mm depth and 5 mm width.
197.1
-
105.6
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved quality complete as per direction of Engineer-in-charge:-
-
-
-
Anodised aluminium of grade AC 15.
8
-
79.9
Providing and fixing 100 mm brass locks ( best make of approved quality ) with 6 levers without pair of handles for aluminium doors including necessary cutting and making good etc. complete as per direction of Engineer-in-charge.
5
-
472.4
SUB-HEAD : WATER PROOFING WORKS
-
-
-
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of :
(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 fine sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound.
(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 fine sand) mixed with water proofing compound in recommended proportions.
(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.[Payment shall be made after submission of the product performance shall carry guaranteed for 10 years against any
leakage]
-
-
-
Using rough kota stone.
25.04
-
1165.6
Page No. 73,113,144
-
-
-
17.2 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in
recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with
cement mortar 1:3 (1 cement : 3 fine sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : [Payment shall be made after submission of the product performance shall carry guaranteed for 10 years against any leakage].
-
-
-
Using rough kota stone
121.09
-
1356.3
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like as required as per direction of the Engineer-in-charge, consisting of : (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with water Proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm). [Payment shall be made after submission of the product performance shall carry guaranteed for 10 years against any leakage]
62.75
-
551.7
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound, as directed by Engineer-in-Charge and consisting of applying :
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and fine sand @ 1.289 kg/sqm.This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. [Payment shall be made after submission of the product performance shall carry guaranteed for 7 years against any leakage] For the purpose of measurement the entire treated surface will be measured.
262.71
-
482.6
II. PLUMBING WORKS
-
-
-
SUB-HEAD : SANITARY WORKS
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.
6
-
4634.9
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
6
-
4398.3
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:
-
-
-
Kitchen sink with drain board
-
-
-
510x1040 mm bowl depth 250mm.
1
-
5073.3
Kitchen sink without drain board
-
-
-
610x510 mm bowl depth 200 mm.
1
-
3264.7
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
27
-
108.6
Providing and fixing White vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively
3
-
1036.9
Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.
2
-
2366.2
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:
-
-
-
Flat back wash basin of size 550x400mm.
11
-
1139.9
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Flexible pipe
-
-
-
40 mm dia
21
-
100.9
Providing and fixing 100 mm sand cast Iron grating for gully trap.
19
-
66.1
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
11
-
834.1
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
11
-
485
Providing and fixing toilet paper holder :
-
-
-
C.P. brass
12
-
436.2
Providing and fixing soil, waste and vent pipes:
-
-
-
100 mm dia.
-
-
-
Sand cast iron S&S pipe as per IS: 1729.
176.5
-
882
Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) in S.C.I./C.I. Pipes:
-
-
-
100 mm dia pipe
52
-
76.4
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :
-
-
-
For 100 mm dia. Pipe
19
-
196.7
Providing and fixing heel rest sanitary bend
-
-
-
100 mm dia
-
-
-
Sand cast iron S&S as per IS - 1729
12
-
543.8
Providing and fixing double equal plain junction of required degree.
-
-
-
100x100x100x100 mm
-
-
-
Sand cast iron S&S as per IS - 1729
16
-
849
Providing and fixing single equal plain junction of required degree
-
-
-
100x100x100 mm
-
-
-
Sand cast iron S&S as per IS - 1729
16
-
563.7
Providing and fixing terminal guard:
-
-
-
100 mm
-
-
-
Sand cast iron S&S as per IS - 1729
18
-
334.1
Providing and fixing collar:
-
-
-
100 mm
-
-
-
Sand cast iron S&S as per IS - 1729
66
-
302.7
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter:
-
-
-
100mm
66
-
365.1
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:
-
-
-
100 mm inlet and 100 mm outlet
-
-
-
Sand Cast Iron S&S as per IS: 1729.
25
-
911.7
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 ement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand):
-
-
-
100 mm dia.
24
-
337.9
Providing and fixing PTMT Waste Coupling for washbasin and sink, of approved quality and colour.
-
-
-
Waste coupling 3.1 mm of 79mm length and 62mm breadth weighing not less than 45 gms
21
-
125
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms
9
-
222.4
Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms.
13
-
261.8
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60gms.
3
-
299.1
Providing and fixing PTMT urinal cock of approved quality and colour.
-
-
-
15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48gms
3
-
184.7
SUB-HEAD : WATER SUPPLY
-
-
-
Providing and fixing G.I pipes complete with G.I. fittings and clamps, including making good the walls/floor etc. concealed pipe including painting two coats or more with anticorrosive bitumastic paint, cutting chases and making good the same.
Internal
-
-
-
15 mm dia nominal bore
55.2
-
421.5
20 mm dia nominal bore
63.5
-
484.2
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
External
-
-
-
25 mm dia. nominal bore
93.5
-
345.3
40 mm dia. nominal bore
125
-
472.8
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
25 to 40 mm nominal bore
7
-
437.5
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
40 mm nominal bore
9
-
695.9
Providing and fixing ball valve (brass) of approved quality complete :
-
-
-
25 mm dia. nominal bore
22
-
584.6
Providing and fixing gun metal non-return valve of approved quality (screwed end):
-
-
-
40 mm nominal bore
-
-
-
Horizontal
4
-
779.4
Constructing masonry Chamber 30x30x50 cm, inside , in brick work in cement mortar 1:4 (1 cement :4 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
With Second Class bricks
5
-
2172.4
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 190 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design
-
-
-
With Second Class bricks
8
-
10581.3
Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 190 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
With Second Class bricks
16
-
17902.6
Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work :
-
-
-
25 mm diameter pipe.
96.5
-
14.2
40 mm diameter pipe.
125
-
21.2
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
25 mm diameter pipe.
123.5
-
9.9
40 mm diameter pipe.
131
-
13.9
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
6000
-
10
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
-
-
-
15 mm nominal bore
12
-
478.1
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
-
-
-
15 mm nominal bore
17
-
629.1
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
15 mm nominal bore
3
-
629.1
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15 mm nominal bore
34
-
548.4
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
41
-
62.6
Providing and fixing PTMT pillar cock of approved quality and colour .
-
-
-
15mm nominal bore, 107mm long, weighing not less than 110 grams.
17
-
187.9
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately):
-
-
-
50 mm dia
3
-
5638.6
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.
13
-
122.5
Page No. 83,121,148
-
-
-
Cutting holes upto 30x30 cm in walls including making good the same :
-
-
-
With 1st class bricks.
25
-
304.6
Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.
20
-
245.9
Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
34.5
-
294.4
SEWAGE AND DRAINAGE WORKS
-
-
-
Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete :
-
-
-
100 mm diameter
122.7
-
252.5
Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design:
-
-
-
100 mm diameter S.W, pipe
122.7
-
1288.3
Supplying and fixing C.I. cover without frame for manholes :
-
-
-
500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg.
21
-
4874.5
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
16
-
8492.8
Extra for depth beyond 450 mm of brick masonry chamber for underground C.I. inspection chamber with same specification as mentioned in item no 20.330 complete as per standard design :
-
-
-
For 500x700 mm size
6
-
7319.4
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
1
-
60699.8
Constructing seak pit 1.20X1.20X120m with brickbats S.W. drain pipe 100mm
2
-
7072.8
III. MISCELLANEOUS & MARKET RATE ITEM WORKS
-
-
-
Signage & Road Work
-
-
-
Direction and Place Identification Signs more than 0.9 sqm Size Board.
-
-
-
Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over luminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRT&H Technical Specification Clause 801
70
-
3754.7
Direction and Place Identification Signs more than 0.9 sqm Size Board.
-
-
-
Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over luminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRT&H Technical Specification Clause 801
Page No. 150
50
-
7055.3
Providing and laying factory made kerb Stone
-
-
-
Providing and laying at or near ground level factory made kerb Stoneof M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 (1cement : 3 sand), including making joints with or without grooves ( thickness of joints except at sharp curve shall not more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-In -Charge (length of finished kerb edging shall be measured for payment). (Precast C.C kerb stone shall be approved by Engineer-in- Charge).
0.29
-
11371.5
60mm thick factory made C.C interlocking paver block of M-35 Grade ['SoR(R&B) 2017]
-
-
-
Case 1- Type -A
-
-
-
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-35 Grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of sand , filling the joints with fine sand etc. all complete as per specification and approval/direction of Engineer-in-Charge.
900
-
1113.9
WASTE BIN, OUT DOOR GARDEN BENCH, IRP, WATER PUMP ETC.
-
-
-
Providing and laying tactile tile/paver tiles (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting thejoints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
216.25
-
1811.28
Supplying, providing and fixing of Out Door Garden Bench of height 27 Inch wide 25 inch and seating area of M.S hollow rectangle section (50mmx25mm) and seating pedistal of cast Iron, including primer and painting ,having seat capacity of 3 members complete in all respect.
44
-
20743.37
Supplying,Providing,installation of Safari Tent with Straight Room Size: 12’ x 12’, Verandah: 4’ x 12’, Centre Height: 9’, Wall Height: 6’, Detachable Lining Rain fly: Double PVC coated, 100% Polyester, 580 GSM, water-proof and anti-rot. Heat sealed seams. Protects the tent body from heavy rain. Tent body (Main roof and walls): 440 GSM 100% polyester ripstop canvas, water resistant and anti-fungal treated. Specially manufactured to resist inclement weather. Lining (Interior): Detachable, using dupion silk.Net (Windows and door): 150 GSM, 50% shade, anti-rot. Frame (Structure): Heavy mild steel with a diameter of 38 mm, wall thickness 1.6 mm. Powder coated. 5mm square base plates. Accessories: Tension straps, standard zip up doors and windows- screened with storm flaps.complete in all respect .
5
-
81901.85
Supplying and providing various type of waste bins at site are as follows wheel based bin model no- GBRW 66-04-660 - 5 nos, GBRW-110-04-1100 - 10 nos, Model No- wheel based community bins model no- GBRW-24-04 -5nos, Litre bin with permanent structure model no-GBRSS 06-022(with GBR 06-01)-05 nos, GBRSS 10-01(with GBR 10-01)-10 nos . complete in all respect.
1
-
497438.53
Supplying , installation, testing & commisioning of Water pump self priming monoblock pump D series MHPB DS1X00 D1 model, pipe size 25x25 mm, head range 6-41 mtr, dischrage range 4000-800 litre/ hour having capacity 1HP complete in all respect.
4
-
20280.46
Providing installation and commisioning of Oximax Iron removal system 1000 litre/hour. Capacity comprising of Iron removal filter standard composite pressure vessel made of corrosion resistance high quality FRP . The Filter media comprises silica dy oxide 90% menganise dyoxide and other non leaching chemicals. All chemicals are infused and thereby ensure long life of media (5 to 8) years. The system also comproses onside chlorine generator MMb-5 electro chloronator producess hypo chlorite solution using comon salt as raw materials for oxidation and dis infection through metering pump and multi port Valve provided to operate the system very easily by changing the knob in to back wash, Rinse and filtration mode whenever needed. all nessesary pipe line for raw water, interconnecting all chambers delivery out let as necessary with suitable enguneering plastic.
2
-
315753.29
SMALL BORE DEEP TUBE WELL WITH MINI RIG.
-
-
-
Drilling and boring pilot hole in any soil strata by mini drilling rig, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the pilot hole properly as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge.
-
-
-
with contractor's mini rig
-
-
-
150 mm dia
172
-
738.5
Reaming of pilot hole to an enlarged bore hole in any soil strata by mini drilling rig, disposal of excess soil or mud,including the cost for bentonite, water etc. as required to maintain the bore hole properly as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge.
-
-
-
with contractor's mini rig
-
-
-
From 150 mm dia pilot hole to 350 mm bore hole
172
-
311.7
Washing of enlarged bore hole of 350 - 550 mm dia in any soil strata by mini drilling rig, disposal of excess soil or mud,including the cost for bentonite, water etc. as required to maintain the bore hole properly, including lifting of drill pipes as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge.
-
-
-
with contractor's mini rig
172
-
60.9
Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by mini drilling rig as per specification and direction of the Engineer - in - charge.
-
-
-
UPVC 'CM' casing pipes
-
-
-
150 mm dia
172
-
1107.1
Providing and fixing of UPVC end cap / well cap suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge.
-
-
-
150 mm dia
2
-
468.4
Providing and fixing of UPVC reducer suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge.
-
-
-
150 X125 mm dia
58
-
913.5
Providing and fixing of housing clamp ( made with 12 mm thick MS sheet ) along with well cap (made with 10 mm thick MS sheet ) with necessary arrangements for SBDTW as per specification and direction of the Engineer - in - charge
-
-
-
150 mm dia
2
-
2421.7
Charges for lowering of UPVC pipe as per IS:12818 (issued from the department free of cost) after washing of the bore hole by mini drilling rig as per specification and direction of the Engineer - in - charge.
-
-
-
with contractor's mini rig
-
-
-
UPVC 'CM' casing pipes
-
-
-
150 mm dia
172
-
189.4
Providing and shrouding of the deep tube well assembly with washed pea gravels ( 2.0 - 4.75 mm effective size ) as per specification ( IS : 4097) using deep drilling rig and direction of the Engineer - in - charge.
-
-
-
with contractor's air compressor
-
-
-
with pea gravels obtained from Golaghat, Assam.
13.5
-
9950.5
Washing and development of tube well by using air compressor, and testing of the well as per specification ( IS : 11189 ) and direction of the Engineer - in - charge.
-
-
-
with contractor's air compressor
-
-
-
Using air compressor of 300 - 450 cfm output for SBDTW
2
-
38325.4
Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as equired as per specification and direction of the Engineer-in-charge.
-
-
-
6.0 Sqmm
180
-
294.8
Supply and erection of submersible pump of HP rating capacity with starter for lifting of water from well KS 6B Series KS6B-0511 model, pipe size 50 mm, head range 97 mtr, dischrage range 120LPM, Power rating 3.7 KW having capacity 5HP complete in all respect.
2
-
54587.86
ELECTRICAL WORKS
-
-
-
Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated copper conductor cable (FR) in pvc casing and capping complete with surface modular switch board with cover plate and modular switch including connection etc as required.
-
-
-
Medium Point :-
224
-
593
Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required.
330
-
329
Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required.
330
-
502
Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC casing capping etc. as required:-
-
-
-
3 X 1.5 sq mm
980
-
88
3 X 4 sq mm
345
-
165
3 X 6 sq mm
300
-
245
3 X 16 sq mm
50
-
533
Supplying and fixing of the following electrical accessories including necessary connection etc. as required.
-
-
-
5/6 amps piano type switch
40
-
33
5/6 amps piano type 2-way switch
10
-
51
16/20 amps piano type switch
22
-
126
3 pin 5/6 amps piano type socket
32
-
73
3/6 pin 16/20 amps piano type socket
16
-
132
Electronic fancy type 5 step fan regulator with cover plate
30
-
366
Angle/batten holder
24
-
51
Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required.
-
-
-
1-2 module GI switch board:-
35
-
179
3 module GI switch board:-
37
-
191
4 module GI switch board:-
18
-
201
6 module GI switch board:-
14
-
242
8 module GI switch board:-
10
-
264
12 module GI switch board:-
7
-
302
Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required.
-
-
-
1-2 module :-
35
-
88
3 module :-
37
-
104
4 module :-
18
-
122
6 module :-
14
-
162
8 module :-
10
-
209
12 module :-
7
-
263
Supplying and fixing of the following modular accessories including necessary connection etc. as required.
-
-
-
6/10 amps one way SP switch (1M) :-
75
-
73
6/10 amps Two way SP switch (1M) :-
9
-
122
16/20 amps one way SP switch (1M) :-
23
-
145
Bell push SP (1M) :-
6
-
144
3 pin 6/10 amps socket outlet (2M):-
65
-
139
3/6 pin 16/20 amps socket outlet (2M):-
28
-
204
RJ11 telephone socket outlet (1M):-
7
-
118
RJ45 LAN socket outlet (1M):-
7
-
396
TV socket outlet (1M):-
6
-
118
Switch board indicator lamp (1M):-
31
-
93
Buzzer call bell (1M):-
5
-
242
Blank plate (1M):-
50
-
40
20/25 amps single phase motor starter switch (2M):-
5
-
401
Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12"x 12" having locking arrangement including CC work, holes on earth pipe etc. as required.
5
-
3829
Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required.
5
-
780
Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required.
170
-
24
Supply and fixing of 25mm x 5mm GI strip on wall/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals.
130
-
291
Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated copper conductor cable(FR) conforming to IS 374 (1979), BEE 5 star.
30
-
2234
Installation, testing and commissioning of ceiling fan i/c wiring the down rod of standard length (up to 30 cm) by 2 x 1.5 Sq.mm PVC insulated copper conductor cable etc as required.
30
-
99
Carriage of ceiling fan from store to work site.
30
-
19
Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:-
32
-
1617
Supplying & installation of 450 mm sweep 1400 rpm metalic body exhaust fan including connection etc as required:-
7
-
5555
Supplying & installation of shutter for 230/300 mm sweep metalic body exhaust fan in the existing hole as required:-
32
-
359
Supplying & installation of shutter for 380/450 mm sweep metalic body exhaust fan in the existing hole as required:-
7
-
506
Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required:
39
-
240
Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-
-
-
-
Surface mounted integrated 10 watt LED batten with polycarbonate diffuser:-
40
-
672
Surface mounted integrated 20 watt LED batten with polycarbonate diffuser:-
30
-
953
Recessed/Surface mounted 2ft x 2ft decorative 36 watt LED panel light with integral driver and high quality polycarbonate diffuser:-
30
-
5620
Recessed/Surface mounted 1ft x 1ft decorative 16/18 watt LED panel light with integral driver and high quality polycarbonate diffuser:-
40
-
3211
Surface mounted round/Square shaped 6/7 watt LED downlight with integral driver and high quality polycarbonate diffuser:-
44
-
1204
Surface mounted round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:-
40
-
1305
Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-
-
-
-
6 watt/10 watt LED Bulkhead light with high quality polycarbonate diffuser (IP 65):-
34
-
1832
Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-
-
-
-
9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-
17
-
158
12 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-
17
-
289
Supplying and fixing of powder coated sheet steel enclosure on surface/recess, suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.
-
-
-
2+10 / 12 way MCB DB (double door):-
7
-
2081
4 way TPN MCB DB (double door):-
4
-
3254
4 way vertical TPN MCB DB suitable for MCCB as incomer upto 125 amps (Double door):-
2
-
9944
Supplying & fixing of following ratings MCB B/C curve having breaking capacity 10 KA in the existing MCB DB including connection as required:-
-
-
-
6 to 32 amps SP MCB:-
70
-
218
40/50/63 amps TP MCB:-
5
-
1647
Supplying & installation of TP/FP MCCB of following ratings in the existing MCCB enclosure/ panel board including connection etc as required (Ics=100% of Icu with adjustable settings):-
-
-
-
125 amps TP MCCB, Breaking capacity 25KA (Thermal Magnetic):-
2
-
8440
Supplying and laying of the following XLPE insulated PVC sheathed alluminum armoured cable including connection etc as required.
-
-
-
3.5 core 35 Sq mm
250
-
281
WIRING ACCESSORIES
-
-
-
Supplying and fixing of the following PVC casing capping with all accessories etc. as required.
-
-
-
20 x 12mm
370
-
39
25 x 12mm
140
-
45
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements