Tripura Tourism Development Corporation Limited Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Costs
EMD
₹ 4,11,383Document Cost
₹ 8,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_TTDC_30382_1Bid Award Id
ViewTender No
93/MD/TTDCL/ASI-South/22-23Tender Authority
Tripura Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://http://tripuratourism.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Tender documents on Conservation and Development works under SD-II sanctioned by Ministry of Tourism, Government of India in ASI protected areas in Tripura at Bhubaneswari Temple, Mahadev bari and Pilak site - 02 (2nd Call)
Notice Inviting Tender for Conservation and Development works under SD-II sanctioned by Ministry of Tourism, Government of India in ASI protected areas in Tripura at Bhubaneswari Temple, Mahadev bari and Pilak site - 02 (2nd Call)
BoQ of Conservation and Development works under SD-II sanctioned by Ministry of Tourism, Government of India in ASI protected areas in Tripura at Bhubaneswari Temple, Mahadev bari and Pilak site - 02 (2nd Call)
BOQ Items
... More
All kinds of soil
2494.89
-
13.5
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-
-
-
... More
All kinds of soil
2264.6
-
134.9
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
All kinds of soil
441.22
-
169.5
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
-
-
-
... More
All kinds of soil
2226.38
-
120.3
... More
Extra for additional lift of 1.5m or part thereof.
8
-
49.8
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
277.05
-
887.5
... More
ANTITERMITE TRAEMENT
-
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
... More
Chlorpyriphos/Lindane emulsifiable concentrate of 20%
37.26
-
212.1
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment as per IS: 6313 (Part III)- Latest revision (excluding the cost of chemical emulsion):
-
-
-
... More
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.
-
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
65.91
-
17.1
... More
Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling:
-
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
99.72
-
94.9
... More
SUB-HEAD : CEMENT CONCRETE WORK
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level:
-
-
-
... More
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
0.65
-
10456.6
... More
1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
285.97
-
9872.1
... More
Providing and laying cement concrete in retaining walls, return walls (any thick-ness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. upto floor five level, excluding the cost of centring shuttering and finishing -
-
-
-
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
aggregate 20 mm nominal size)
122.57
-
11874.5
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
Foundations, footings, bases for columns.
78.51
-
238.6
... More
including attached pilasters, but-tresses plinth and
string courses fillets etc.
260.55
-
308.4
... More
Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm/20mm nominal size).
-
-
-
... More
D.P.C. 40 mm thick
17.26
-
445.9
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification
4.37
-
61.5
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
40.38
-
810.5
... More
SUB-HEAD : Reinforced Cement Concrete Work
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement -All work upto plinth level:
-
-
-
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
32.49
-
10974.6
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-
-
-
-
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
89.29
-
11791.9
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-
-
-
-
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
29.19
-
12104.7
... More
Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having
slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with
-
-
-
... More
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
19.62
-
12430.1
... More
Centering shuttering including struttings, propping etc.
-
-
-
... More
Foundations, footings, bases for columns etc. for mass concrete with timber plank
78.78
-
268.9
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
517.6
-
370
... More
Suspended floors, roofs, landings, balconies and access platform with timber planks
288.02
-
464.3
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank
217.99
-
317.7
... More
Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
151.18
-
483
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars
36108.6
-
78.2
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.
-
-
-
... More
Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars
9661.42
-
78.2
... More
SUB-HEAD : BRICK WORK
-
-
-
... More
First class brick work in foundation and plinth including cost of all materials as required complete.
-
-
-
... More
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
29.11
-
8888.4
... More
First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete.
-
-
-
... More
In cement mortar 1:6 ( 1 cement : 6 fine sand ).
44.58
-
9859.7
... More
Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-
-
-
-
... More
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
26.82
-
1187.9
... More
Half brick masonry with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-
-
-
-
... More
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
48.47
-
1363.1
... More
Sub-Head: Marble & Granite Work
-
-
-
... More
Providing and fixing gang saw cut of approved thickness mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, windows sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 (1 cemebnt : 4 fine sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, inlcuding rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels:-
-
-
-
... More
14 mm thick Rajnagar Plain white marble/ Udaipur green marble/ Zebra black marble or equivalent duly approved:-
-
-
-
... More
Area of slab over 0.50 sqm.
6.06
-
3211.8
... More
Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-Charge:-
-
-
-
... More
14 mm thick Granite work.
9.85
-
228.5
... More
SUB-HEAD : WOOD WORK
-
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :
-
-
-
... More
Local Teak wood
0.21
-
87719.7
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
7.98
-
1786.6
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.Fixed to steel windows by welding.
-
-
-
... More
Fixed to openings /wooden frames with rawl plugs screws etc.
283.69
-
126.4
... More
Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size)
32
-
162.4
... More
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete
-
-
-
... More
125 × 65 × 2.12 mm
32
-
41.5
... More
Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.
4
-
1094.5
... More
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
... More
300 x 16 mm
4
-
259.9
... More
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
250 x 10 mm
8
-
104.9
... More
100x10 mm
14
-
66.5
... More
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
125 mm
22
-
64.7
... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
-
-
-
... More
Twin rubber stopper
4
-
61.8
... More
Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws.
34.65
-
468.8
... More
Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter).
3.15
-
3094.4
... More
Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive.
7.98
-
704.6
... More
SUB-HEAD : STEEL WORK
-
-
-
... More
Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.
1
-
146.2
... More
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-
-
-
-
... More
In stringers, treads, landing etc. of stair cases including use of chequered plate wherever required, all complete.
408.09
-
95.4
... More
Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:-
-
-
-
... More
M.S. tube
337.35
-
121.4
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
78.91
-
532.7
... More
SUB-HEAD : FLOORING
-
-
-
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
162.11
-
792
... More
Providing and laying 1st quality ceramic glazed floor tiles of approved size conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades as approved by Engineer-in-charge over 20 mm thick bed of cement mortar 1 : 4 (1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
-
-
-
... More
Anti-Skid Tiles
-
-
-
... More
Ceramic Glazed Tiles 1st quality 300 x 300mm in all shades and designs
108.81
-
841.2
... More
Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 % and conforming to IS : 15622 of approved make in all colours, shades over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
-
-
-
... More
Double charged Stainfree vitrified tiles
-
-
-
... More
Size of tile 60x60 cm
29.28
-
1118.2
... More
Providing and laying Vitrified tiles in different es(thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
... More
Double charged Stainfree vitrified tiles
-
-
-
... More
Size of tile 60x60 cm
4.85
-
1178.5
... More
Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer- in -charge.
13.56
-
573.6
... More
SUB-HEAD : ROOFING WORK
-
-
-
... More
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 fine sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand) and finished neat complete
206.7
-
462.8
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre,one flange fixed to the ceiling with dash fastener 12.5 mm dia x50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings,grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
12.5 mm thick tapered edge gypsum moisture resistant board
47.1
-
1025.4
... More
SUB-HEAD : FINISHING WORK
-
-
-
... More
12 mm cement plaster of mix
-
-
-
... More
In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
391.94
-
174.8
... More
In cement mortar 1 : 6 ( 1 cement : 6 fine sand )
445.66
-
159.6
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:
-
-
-
... More
In cement mortar 1 : 6 ( 1 cement : 6 fine sand )
229.29
-
185.3
... More
6 mm cement plaster of mix:
-
-
-
... More
In cement mortar 1 : 3 ( 1 cement : 3 fine sand )
201.4
-
144.5
... More
Neat cement punning.
102.64
-
45.1
... More
Extra for plastering done on moulding cornices or architraves including neat finish to line and level.
-
-
-
... More
In two layer
308.37
-
517.1
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
387.51
-
101.6
... More
Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
-
-
-
... More
New work ( two or more coats) over and including water
thinnable priming coat with cement primer.
106.36
-
95.7
... More
Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.43 litre/10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
-
-
-
... More
New work ( two or more coats applied @ 1.43 litre/10 sqm
over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
319.18
-
119.3
... More
Applying priming coat: [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
-
-
-
... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron / steel work.
18.31
-
31.7
... More
Painting on wood work with oil type wood preservative ( two or more coats) of approved brand and manufacture on new work complete.
-
-
-
... More
New work (two or more coats)
7.98
-
34.7
... More
Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade.[Payment shall be made after submission of Test Certificate issued by the Manufacturer]
-
-
-
... More
Two or more coats on new work
182.3
-
82.8
... More
SUB-HEAD : ALUMINIUM WORK
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-
-
-
-
... More
For fixed portion of approved quality:-
-
-
-
... More
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
126.16
-
400.2
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):-
-
-
-
... More
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
127.35
-
471.6
... More
Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-
-
-
-
... More
With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )
12.96
-
1058.2
... More
Filling the gap in between aluminium frame and adjacent RCC/brick work by providing weather silicon sealant over backer rod of approved quality etc. complete as per architectural drawing and direction of the Engineer-in charge:- (i) Upto 5 mm depth and 5 mm width.
66.6
-
105.6
... More
SUB-HEAD : WATER PROOFING WORKS
-
-
-
... More
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of :
(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 fine sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound.
(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 fine sand) mixed with water proofing compound in recommended proportions.
(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.[Payment shall be made after submission of the product performance shall carry guaranteed for 10 years against any
leakage]
-
-
-
... More
Using rough kota stone.
6
-
1165.6
... More
Page No. 62
-
-
-
... More
17.2 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in
recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with
cement mortar 1:3 (1 cement : 3 fine sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : [Payment shall be made after submission of the product performance shall carry guaranteed for 10 years against any leakage].
-
-
-
... More
Using rough kota stone
32.48
-
1356.3
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like as required as per direction of the Engineer-in-charge, consisting of : (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with water Proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm). [Payment shall be made after submission of the product performance shall carry guaranteed for 10 years against any leakage]
44.52
-
551.7
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound, as directed by Engineer-in-Charge and consisting of applying :
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and fine sand @ 1.289 kg/sqm.This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. [Payment shall be made after submission of the product performance shall carry guaranteed for 7 years against any leakage] For the purpose of measurement the entire treated surface will be measured.
201.4
-
482.6
... More
II. PLUMBING WORKS
-
-
-
... More
SUB-HEAD : SANITARY WORKS
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
... More
White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.
2
-
4634.9
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
6
-
4398.3
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
15
-
108.6
... More
Providing and fixing White vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively
2
-
1036.9
... More
Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.
1
-
2366.2
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:
-
-
-
... More
Flat back wash basin of size 550x400mm.
5
-
1139.9
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Flexible pipe
-
-
-
... More
40 mm dia
5
-
100.9
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
8
-
66.1
... More
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
5
-
834.1
... More
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
5
-
485
... More
Providing and fixing toilet paper holder :
-
-
-
... More
C.P. brass
8
-
436.2
... More
Providing and fixing soil, waste and vent pipes:
-
-
-
... More
100 mm dia.
-
-
-
... More
Sand cast iron S&S pipe as per IS: 1729.
100.75
-
882
... More
Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) in S.C.I./C.I. Pipes:
-
-
-
... More
100 mm dia pipe
32
-
76.4
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :
-
-
-
... More
For 100 mm dia. Pipe
8
-
196.7
... More
Providing and fixing heel rest sanitary bend
-
-
-
... More
100 mm dia
-
-
-
... More
Sand cast iron S&S as per IS - 1729
8
-
543.8
... More
Providing and fixing double equal plain junction of required degree.
-
-
-
... More
100x100x100x100 mm
-
-
-
... More
Sand cast iron S&S as per IS - 1729
8
-
849
... More
Providing and fixing single equal plain junction of required degree
-
-
-
... More
100x100x100 mm
-
-
-
... More
Sand cast iron S&S as per IS - 1729
8
-
563.7
... More
Providing and fixing terminal guard:
-
-
-
... More
100 mm
-
-
-
... More
Sand cast iron S&S as per IS - 1729
10
-
334.1
... More
Providing and fixing collar:
-
-
-
... More
100 mm
-
-
-
... More
Sand cast iron S&S as per IS - 1729
32
-
302.7
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter:
-
-
-
... More
100mm
32
-
365.1
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:
-
-
-
... More
100 mm inlet and 100 mm outlet
-
-
-
... More
Sand Cast Iron S&S as per IS: 1729.
11
-
911.7
... More
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand):
-
-
-
... More
100 mm dia.
10
-
337.9
... More
Providing and fixing PTMT Waste Coupling for washbasin and sink, of approved quality and colour.
-
-
-
... More
Waste coupling 3.1 mm of 79mm length and 62mm breadth weighing not less than 45 gms
5
-
125
... More
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms
5
-
222.4
... More
Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms.
5
-
261.8
... More
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60gms.
2
-
299.1
... More
Providing and fixing PTMT urinal cock of approved quality and colour.
-
-
-
... More
15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48gms
2
-
184.7
... More
SUB-HEAD : WATER SUPPLY
-
-
-
... More
Providing and fixing G.I pipes complete with G.I. fittings and clamps, including making good the walls/floor etc. concealed pipe including painting two coats or more with anticorrosive bitumastic paint, cutting chases and making good the same.
-
-
-
... More
Internal
-
-
-
... More
15 mm dia nominal bore
30.2
-
421.5
... More
20 mm dia nominal bore
28.5
-
484.2
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
-
-
-
... More
External
-
-
-
... More
25 mm dia. nominal bore
41.5
-
345.3
... More
40 mm dia. nominal bore
99
-
472.8
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
... More
25 to 40 mm nominal bore
3
-
437.5
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
... More
40 mm nominal bore
5
-
695.9
... More
Providing and fixing ball valve (brass) of approved quality complete :
-
-
-
... More
25 mm dia. nominal bore
14
-
584.6
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end):
-
-
-
... More
40 mm nominal bore
-
-
-
... More
Horizontal
2
-
779.4
... More
Constructing masonry Chamber 30x30x50 cm, inside , in brick work in cement mortar 1:4 (1 cement :4 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With Second Class bricks
1
-
2172.4
... More
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 190 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design
-
-
-
... More
With Second Class bricks
2
-
10581.3
... More
Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 190 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With Second Class bricks
2
-
17902.6
... More
Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work :
-
-
-
... More
25 mm diameter pipe.
44.5
-
14.2
... More
40 mm diameter pipe.
99
-
21.2
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
... More
25 mm diameter pipe.
59.5
-
9.9
... More
40 mm diameter pipe.
99
-
13.9
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
-
10
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
-
-
-
... More
15 mm nominal bore
8
-
478.1
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
-
-
-
... More
15 mm nominal bore
12
-
629.1
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
... More
15 mm nominal bore
2
-
629.1
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
15 mm nominal bore
21
-
548.4
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
23
-
62.6
... More
Providing and fixing PTMT pillar cock of approved quality and colour .
-
-
-
... More
15mm nominal bore, 107mm long, weighing not less than 110 grams.
11
-
187.9
... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately):
-
-
-
... More
50 mm dia
1
-
5638.6
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.
5
-
122.5
... More
Cutting holes upto 30x30 cm in walls including making good the same :
-
-
-
... More
With 1st class bricks.
13
-
304.6
... More
Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.
10
-
245.9
... More
Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
15
-
294.4
... More
SEWAGE AND DRAINAGE WORKS
-
-
-
... More
Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete :
-
-
-
... More
100 mm diameter
69.15
-
252.5
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design:
-
-
-
... More
100 mm diameter S.W, pipe
69.15
-
1288.3
... More
Supplying and fixing C.I. cover without frame for manholes :
-
-
-
... More
500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg.
8
-
4874.5
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
... More
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
10
-
8492.8
... More
Extra for depth beyond 450 mm of brick masonry chamber for underground C.I. inspection chamber with same specification as mentioned in item no 20.330 complete as per standard design :
-
-
-
... More
For 500x700 mm size
4.8
-
7319.4
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
1
-
60699.8
... More
III. MISCELLANEOUS & MARKET RATE ITEM WORKS
-
-
-
... More
Signage
-
-
-
... More
Direction and Place Identification Signs more than 0.9 sqm Size Board.
-
-
-
... More
Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over luminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRT&H Technical Specification Clause 801
220
-
3754.7
... More
Direction and Place Identification Signs more than 0.9 sqm Size Board.
-
-
-
... More
Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over luminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRT&H Technical Specification Clause 801
160
-
7055.3
... More
Providing and laying factory made kerb Stone
-
-
-
... More
Providing and laying at or near ground level factory made kerb Stoneof M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 (1cement : 3 sand), including making joints with or without grooves ( thickness of joints except at sharp curve shall not more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-In -Charge (length of finished kerb edging shall be measured for payment). (Precast C.C kerb stone shall be approved by Engineer-in- Charge).
3.42
-
11371.5
... More
60mm thick factory made C.C interlocking paver block of M-35 Grade
-
-
-
... More
Case 1- Type -A
-
-
-
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-35 Grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of sand , filling the joints with fine sand etc. all complete as per specification and approval/direction of Engineer-in-Charge.
2276.48
-
1113.9
... More
WASTE BIN, OUT DOOR GARDEN BENCH, IRP, WATER PUMP ETC.
-
-
-
... More
Supplying, providing and fixing of Out Door Garden Bench of height 27 Inch wide 25 inch and seating area of M.S hollow rectangle section (50mmx25mm) and seating pedistal of cast Iron, including primer and painting ,having seat capacity of 3 members complete in all respect.
40
-
20743.37
... More
Supplying , installation, testing & commisioning of Water pump self priming monoblock pump D series MHPB DS1X00 D1 model, pipe size 25x25 mm, head range 6-41 mtr, dischrage range 4000-800 litre/ hour having capacity 1HP complete in all respect.
2
-
20280.46
... More
ELECTRICAL WORKS
-
-
-
... More
Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated copper conductor cable (FR) in pvc casing and capping complete with surface modular switch board with cover plate and modular switch including connection etc as required.
-
-
-
... More
Medium Point :-
54
-
593
... More
Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required.
150
-
329
... More
Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required.
150
-
502
... More
Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC casing capping etc. as required:-
-
-
-
... More
3 X 1.5 sq mm
570
-
88
... More
3 X 4 sq mm
180
-
165
... More
3 X 6 sq mm
180
-
245
... More
3 X 10 sq mm
-
-
342
... More
3 X 16 sq mm
30
-
533
... More
Supplying and fixing of the following electrical accessories including necessary connection etc. as required.
-
-
-
... More
5/6 amps piano type switch
10
-
33
... More
5/6 amps piano type 2-way switch
3
-
51
... More
16/20 amps piano type switch
6
-
126
... More
3 pin 5/6 amps piano type socket
10
-
73
... More
3/6 pin 16/20 amps piano type socket
6
-
132
... More
Electronic fancy type 5 step fan regulator with cover plate
6
-
366
... More
Angle/batten holder
8
-
51
... More
Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required.
-
-
-
... More
1-2 module GI switch board:-
15
-
179
... More
3 module GI switch board:-
9
-
191
... More
4 module GI switch board:-
6
-
201
... More
6 module GI switch board:-
6
-
242
... More
8 module GI switch board:-
6
-
264
... More
12 module GI switch board:-
3
-
302
... More
Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required.
-
-
-
... More
1-2 module :-
15
-
88
... More
3 module :-
9
-
104
... More
4 module :-
6
-
122
... More
6 module :-
6
-
162
... More
8 module :-
6
-
209
... More
12 module :-
3
-
263
... More
Supplying and fixing of the following modular accessories including necessary connection etc. as required.
-
-
-
... More
6/10 amps one way SP switch (1M) :-
30
-
73
... More
6/10 amps one way SP switch (1M) :-
-
-
122
... More
16/20 amps one way SP switch (1M) :-
15
-
145
... More
Bell push SP (1M) :-
3
-
144
... More
3 pin 6/10 amps socket outlet (2M):-
15
-
139
... More
3/6 pin 16/20 amps socket outlet (2M):-
15
-
204
... More
RJ11 telephone socket outlet (1M):-
3
-
118
... More
RJ45 LAN socket outlet (1M):-
3
-
396
... More
TV socket outlet (1M):-
3
-
118
... More
Switch board indicator lamp (1M):-
15
-
93
... More
Buzzer call bell (1M):-
3
-
242
... More
Blank plate (1M):-
15
-
40
... More
20/25 amps single phase motor starter switch (2M):-
1
-
401
... More
Buzzer call bell (1M):-
3
-
242
... More
Blank plate (1M):-
15
-
40
... More
20/25 amps single phase motor starter switch (2M)(1M):-
1
-
401
... More
Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12"x 12" having locking arrangement including CC work, holes on earth pipe etc. as required.
3
-
3829
... More
Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required.
3
-
780
... More
Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required.
60
-
24
... More
Supply and fixing of 25mm x 5mm GI strip on wall/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals.
40
-
291
... More
Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated copper conductor cable(FR) conforming to IS 374 (1979), BEE 5 star.
6
-
2234
... More
Installation, testing and commissioning of ceiling fan i/c wiring the down rod of standard length (up to 30 cm) by 2 x 1.5 Sq.mm PVC insulated copper conductor cable etc as required.
6
-
99
... More
Carriage of ceiling fan from store to work site.
6
-
19
... More
Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:-
24
-
1617
... More
Supplying & installation of 450 mm sweep 1400 rpm metalic body exhaust fan including connection etc as required:-
3
-
5555
... More
Supplying & installation of shutter for 230/300 mm sweep metalic body exhaust fan in the existing hole as required:-
24
-
359
... More
Supplying & installation of shutter for 380/450 mm sweep metalic body exhaust fan in the existing hole as required:-
3
-
506
... More
Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required:
27
-
240
... More
Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-
-
-
-
... More
Surface mounted integrated 10 watt LED batten with polycarbonate diffuser:-
15
-
672
... More
Surface mounted integrated 20 watt LED batten with polycarbonate diffuser:-
10
-
953
... More
Recessed/Surface mounted 2ft x 2ft decorative 36 watt LED panel light with integral driver and high quality polycarbonate diffuser:-
10
-
5620
... More
Recessed/Surface mounted 1ft x 1ft decorative 16/18 watt LED panel light with integral driver and high quality polycarbonate diffuser:-
15
-
3211
... More
Surface mounted round/Square shaped 6/7 watt LED downlight with integral driver and high quality polycarbonate diffuser:-
20
-
1204
... More
Surface mounted round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:-
15
-
1305
... More
Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-
-
-
-
... More
6 watt/10 watt LED Bulkhead light with high quality polycarbonate diffuser (IP 65):-
12
-
1832
... More
Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-
-
-
-
... More
9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-
6
-
158
... More
12 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-
6
-
289
... More
Supplying and fixing of powder coated sheet steel enclosure on surface/recess, suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.
-
-
-
... More
2+10 / 12 way MCB DB (double door):-
3
-
2081
... More
Supplying & fixing of following ratings MCB B/C curve having breaking capacity 10 KA in the existing MCB DB including connection as required:-
-
-
-
... More
6 to 32 amps SP MCB:-
30
-
218
... More
40/50/63 amps TP MCB:-
3
-
1647
... More
Supplying and laying of the following XLPE insulated PVC sheathed alluminum armoured cable including connection etc as required.
-
-
-
... More
3.5 core 35 Sq mm
150
-
281
... More
WIRING ACCESSORIES
-
-
-
... More
Supplying and fixing of the following PVC casing capping with all accessories etc. as required.
-
-
-
... More
20 x 12mm
150
-
39
... More
25 x 12mm
60
-
45
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements