Tripura State Electricity Corporation Limited Tender
... More
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Costs
EMD
₹ 4,12,931Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Shifting Of Existing 33 Kv, 11 Kv, Lt Line And Service Connection From Sidong Cherra 343 Km To 82 Miles 352 Km In Connection With Construction And Widening Of Nh 8 44 A.a. Road Within The Jurisdiction Of Electrical Sub Division, Kumarghat.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_POWER_3952_1Tender No
GM Tech./2018-19/ 22 dated 01-03-2019Tender Authority
Tripura State Electricity Corporation Limited ViewPurchaser Address
-Website
http://https://www.tsecl.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Erection of 12.0 mtr. long Steel Tubular pole with base plate,direct in earth including excavation, refilling and ramming etc. as required complete (1/6th of the length of the pole to be embedded in earth) as per direction of the Engineer-in-Charge.
18
-
-
... More
Supply of 11 mtr long Steel Tubular Pole conforming to ISS 2713 (P-I & II) 1980 with base plate (Designation 410 - SP - 56)Pole are painted with red oxide primer on top and middle section,conforming to IS:2074/1979 and hot dip galvanized on both surfaces of the bottom section of the pole and base plate conforming to IS-4736-1986,as per Technical specification of Section-V (A)
514
-
-
... More
Erection of 11 mtr. long Steel Tubular pole with base plate,direct in earth including excavation, refilling and ramming etc. as required complete (1/6th of the length of the pole to be embedded in earth) as per direction of the Engineer-in-Charge.
514
-
-
... More
Supply of 9 mtr long Steel Tubular Pole conforming to ISS 2713 (P-I & II) 1980 with base plate , (Designation 410 - SP - 32)Pole are painted with red oxide primer on top and middle section,conforming to IS:2074/1979 and hot dip galvanized on both surfaces of the bottom section of the pole and base plate conforming to IS-4736-1986,as per Technical specification of Section-V (A)
100
-
-
... More
Erection of 9.0 mtr. long Steel Tubular pole with base plate,direct in earth including excavation, refilling and ramming etc. as required complete (1/6th of the length of the pole to be embedded in earth) as per direction of the Engineer-in-Charge.
100
-
-
... More
Supply of Painted stay set complete (for HT & LT line)as per Specification of Section-V of the bid document
532
-
-
... More
Supply of Galvanized stranded stay wire (7/2.5 mm)conforming to IS-209-1966,IS-2141-1968, IS-2629, IS-2633, IS-4826, IS-6745 & IS-12776.
3
-
-
... More
Supply of 33 KV Stay Insulator, conforming to IS:5300/1969.
50
-
-
... More
Supply of 11 KV Stay Insulator conforming to IS:5300/1969.
400
-
-
... More
Supply of LT Stay Insulator conforming to IS:5300/1969.
82
-
-
... More
Supply of Strain screw
32
-
-
... More
Erection of painted stay set complete direct in earth with 16 mm. dia. 1.8 mtr. long painted stay rod, anchor plate of size 300 X 300 X 8 mm. thick, turn buckle of length 356 mm. with 300 mm. long threaded adjustable 16 mm. dia. MS rod , thimble, guy insulator as per IS specification, hot dip (heavy duty) galvanized stay stranded wire of size 7/2.5 mm. fastened with stay clamps as required. ( including supply of MS clamp & Nuts & Bolts as reqd)
532
-
-
... More
Supply of triple pole (3 phase), 12 KV, 200 Amp. Manually gang operated, air brake switch, as per technical specification of Section-V of the bid document with and supply of clamps, nuts and bolts as par relevant IS.
20
-
-
... More
Erection of 11 KV, 200 Amps. 3-phase GO Switch complete i/c fixing horizontally & vertically operating pipe & operating handle with nuts & bolts etc. as required.
20
-
-
... More
Supply of 12 KV,3 phase 200 Amp. drop out fuse unit conforming to IS:-9385(Part-I to III) as amended till to date ,all farous part shall be hot dip galvanized as per IS:- 2633 along with Supply of nuts & bolts and bimetallic lugs as per relevant IS.
20
-
-
... More
Erection of 11 KV DOF Set of three nos i/c necessary connection complete as per Technical Specification
20
-
-
... More
Supply of 9 KV, 5 KN single pole metal oxide gapless surge type LA conforming to IS: 3070 (Part-III)& IS-2071(methods for H.V test)
48
-
-
... More
Erection of 9 KV, 5 KA single pole metal oxide gapless surge type LA suitable for nominal system voltage of 11 KV, 3 phase, 50 Hz, AC supply. Normal Creepage distance 600 mm. conforming to ISS:3070/1993 (Set of 3 (three) nos.)
16
-
-
... More
Supply of ACSR conductor conforming to IS:-398(Part-I & II) of 1996 with latest amendment and as per technical specification attached at Section-V of the bid document a) 6 /4.72 + 7/1.57 mm ACSR (Dog).
3
-
-
... More
b) 6/1/2.59 mm ACSR (Weasel)
91
-
-
... More
Laying, hoisting & stringing including binding, jumpering, etc. as required of ACSR (7/1.57/6/4.72 mm) DOG conductor ,as per direction of the Engineer-in-Charge.
3
-
-
... More
Laying, hoisting & stringing including binding, jumpering, etc. as required of 6/1/2.59 mm ACSR (Weasel) conductor as per direction of the Engineer-in-Charge.
90
-
-
... More
Supply, of 8 SWG G.I. wire as per ISS : 280/1978 amended latest with heavy coating as per ISS : 4826 / 1968 of tensile strength 55 to 95 Kgf /mm. and as per technical specification attached at Section-V of the bid document.
5.5
-
-
... More
Laying, hoisting & stringing of 8 SWG G.I. wire as per ISS : 280/1978 amended latest with heavy coating as per ISS : 4826 I 1968 of tensile strength 55 to 95 Kgf/mm i/c fastening with cross arm & metallic parts for earth continuity wire and metal parts to earth electrode as per direction of the Engineer-in-Charge.
51
-
-
... More
Supply of fabricated Sub-station Cross arm , 2.8 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
55
-
-
... More
Erection of Sub-station Cross arm , 2.8 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts & washers complete.
55
-
-
... More
Supply of fabricated Transformer support Cross arm , 0.6 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
34
-
-
... More
Erection of Transformer support Cross arm , 0.6 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
34
-
-
... More
Supply of fabricated MS channel bracket for G.O.S & D.O. fuse unit on double steel tubular pole or PCC pole or RS joist structure , 2.8 mtr. long made of 75 X 40 X 40 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
84
-
-
... More
Erection of fabricated MS channel bracket for G.O.S & D.O. fuse unit on double steel tubular pole or PCC pole or RS joist structure, 2.8 mtr. long made of 75 X 40 X 40 X 6 mm. MS channel with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts & washers complete.
84
-
-
... More
Supply of fabricated MS Angle bracket for Gang operating bkt. of Sub-Station on double steel tubular pole or PCC pole or RS joist structure , 2.8 mtr. long made of 65x65x6 mm. MS Angle painted with Steel primer of approved quality along with drilling of holes as required with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
24
-
-
... More
Erectionof fabricated MS Angle bracket for Gang operating bkt. of Sub-Station on double steel tubular pole or PCC pole or RS joist structure , 2.8 mtr. long made of 65x65x6 mm. MS Angle with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
24
-
-
... More
Supply of fabricated Sub-station Cross arm , 2.2mtr. long made of 100 X 50 X 50 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required for 33 KV line on double Steel Tubular pole or PCC pole or R.S Joist with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
4
-
-
... More
Erection of fabricated Sub-station Cross arm , 2.2mtr. long made of 100 X 50 X 50 X 6 mm. MS channel for 33 KV line with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
4
-
-
... More
Supply of fabricated Sub-station Cross arm , 2.5 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required for 33 KV line on double Steel Tubular pole or PCC pole or R.S Joist with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
4
-
-
... More
Erection of fabricated Sub-station Cross arm , 2.5 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel for 33 KV line on double Steel Tubular pole or PCC pole or R.S Joist with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
4
-
-
... More
Supply of fabricated Pole Top Cross arm , 0.3 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required for 33 KV line on single Steel Tubular pole or PCC pole or R.S Joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
10
-
-
... More
Erection of fabricated Pole Top Cross arm , 0.3 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel for 33 KV line on single Steel Tubular pole or PCC pole or R.S Joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
10
-
-
... More
Supply of fabricated bottom Cross arm , 2.2 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required for 33 KV line on single Steel Tubular pole or PCC pole or R.S Joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
10
-
-
... More
Erection of fabricated bottom Cross arm , 2.2 mtr. long made of 100 X 50 X 50 X 6 mm. MS channel for 33 KV line on single Steel Tubular pole or PCC pole or R.S Joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
10
-
-
... More
Supply of fabricated Cross arm , 3.0 mtr. long made of 75 X 40 X 40 X 6 mm. MS channel painted with Steel primer of approved quality along with drilling of holes as required for 33 KV line on double Steel Tubular pole or PCC pole or R.S Joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
4
-
-
... More
Erection of fabricated Cross arm , 3.0 mtr. long made of 75 X 40 X 40 X 6 mm. MS channel for 33 KV line on double Steel Tubular pole or PCC pole or R.S Joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
4
-
-
... More
Supply of fabricated 2.0 mtr. long guard bracket by 75 X 40 X 40 X 6 mm. MS channel cross arm for 33 KV line on steel tubular pole or PCC pole or RS joist painted with Steel primer of approved quality along with drilling of holes as required with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
10
-
-
... More
Erection of fabricated 2.0 mtr. long guard cross arm by 75 X 40 X 40 X 6 mm. MS channel for 33 KV line on steel tubular pole or PCC pole or RS joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
10
-
-
... More
Supply of fabricated 2.2 mtr. long bottom cross arm by 75 X 40 X 40 X 6 mm. MS channel, for 11 KV line on double steel tubular pole or PCC pole or RS joist painted with Steel primer of approved quality along with drilling of holes as required with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
83
-
-
... More
Erection of fabricated 2.2 mtr. long bottom cross arm by 75 X 40 X 40 X 6 mm. MS channel for 11 KV line on double steel tubular pole or PCC pole or RS joist with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
83
-
-
... More
Supply of fabricated 1.3 mtr. long top cross arm 75 X 40 X 40 X 6 mm. MS channel for 11 KV line on double steel tubular pole or PCC pole or RS joist painted with Steel primer of approved quality along with drilling of holes as required with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
83
-
-
... More
Erection of fabricated 1.3 mtr. long top cross arm by 75 X 40 X 40 X 6 mm. MS channel for 11 KV line on double steel tubular pole or PCC pole or RS joist with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
83
-
-
... More
Supply of fabricated 1.2 mtr. long bottom cross arm by 75 X 40 X 40 X 6 mm. MS channel for 11 KV line on single steel tubular pole or PCC pole or RS joist painted with Steel primer of approved quality along with drilling of holes as required with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
327
-
-
... More
Erection of fabricated 1.2 mtr. long bottom cross arm by 75 X 40 X 40 X 6 mm. MS channel for 11 KV line on single steel tubular pole or PCC pole or RS joist with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
327
-
-
... More
Supply of fabricated 0.3 mtr. long top cross arm by 75 X 40 X 40 X 6 mm. MS channel for 11 KV line on single steel tubular pole or PCC pole or RS joist painted with Steel primer of approved quality along with drilling of holes as required with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
327
-
-
... More
Erection of fabricated 0.3 mtr. long top cross arm by 75 X 40 X 40 X 6 mm. MS channel for 11 KV line on single steel tubular pole or PCC pole or RS joist , with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers complete.
327
-
-
... More
Supply of fabricated ,2.5 mtr. long guard bracket by 65x65x6mm MS Angle for 11 KV line on double steel tubular pole or PCC pole or RS joist structure painted with Steel primer of approved quality along with drilling of holes as required with 2 (two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
80
-
-
... More
Erection of fabricated ,2.5 mtr. long guard bracket by 65x65x6mm MS Angle for 11 KV line on double steel tubular pole or PCC pole or RS joist structure , with 2( two) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
80
-
-
... More
Supply of fabricated ,1.7 mtr. long guard bracket by 65x65x6mm MS Angle for 11 KV line on single steel tubular pole or PCC pole or RS joist structure, painted with Steel primer of approved quality along with drilling of holes as required with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
327
-
-
... More
Erection of fabricated ,1.7 mtr. long guard bracket by 65x65x6mm MS Angle for 11 KV line on single steel tubular pole or PCC pole or RS joist structure with 1 (one) nos. clamp of 50x6 mm. MS flat, ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
327
-
-
... More
Supply of fabricated diagonal cross bracing (1.7m long M.S. angle of size 65x65x6mm) on steel tubular pole or PCC pole or RS joist, for 11 KV/ 33 KV line, painted with Steel primer of approved quality along with drilling of holes as required with , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
166
-
-
... More
Erection of fabricated diagonal cross bracing (1.7m long M.S. angle of size 65x65x6mm) on steel tubular pole or PCC pole or RS joist, for 11 KV/ 33 KV line, along with drilling of holes as required with , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
166
-
-
... More
Supply of fabricated Horizontal cross bracing (1.3m long M.S. angle of size 65x65x6mm) on steel tubular pole or PCC pole or RS joist , for 11 KV/ 33 KV line, painted with Steel primer of approved quality along with drilling of holes as required with 2(two) nos clamp of 50x6 mm MS flat, , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
166
-
-
... More
Erection of fabricated Horizontal cross bracing (1.3m long M.S. angle of size 65x65x6mm) on steel tubular pole or PCC pole or RS joist, for 11 KV/ 33 KV line, along with drilling of holes as required with 2(two) nos clamp of 50x6 mm MS flat, , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
166
-
-
... More
Supply of fabricated LT 2 wire bracket ,0.55 mtr. long made off 50 X 50 X 6 mm. MS angle on steel tubular pole or PCC pole or RS joist, painted with Steel primer of approved quality along with drilling of holes as required with 1(one ) nos clamp of 50x6 mm MS flat, , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
186
-
-
... More
Erection of fabricated LT 2 wire bracket ,0.55 mtr. long made off 50 X 50 X 6 mm. MS angle on steel tubular pole or PCC pole or RS joist, along with drilling of holes as required with 1(one ) nos clamp of 50x6 mm MS flat, , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
186
-
-
... More
Supply of fabricated LT 4 wire 'C' bracket , 1.1 mtr. long made off 50 X 50 X 6 mm. MS angle on steel tubular pole or PCC pole or RS joist, painted with Steel primer of approved quality along with drilling of holes as required with 2(two ) nos clamp of 50x6 mm MS flat, , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
186
-
-
... More
Erection of fabricated LT 4 wire 'C' bracket , 1.1 mtr. long made off 50 X 50 X 6 mm. MS angle on steel tubular pole or PCC pole or RS joist, with 2(two ) nos clamp of 50x6 mm MS flat, , ISI marked 65 mm x 16 mm (length x diameter) (38 mm thread) M.S.hexagonal head round nack bolts with hexagonal nuts with two washers
186
-
-
... More
Supply of Composite Polymeric Disc Insulator, ball and socket type for 11 KV and 33 KV system (EMS-70 KN) as per technical specification of Section-V of the bid document.
700
-
-
... More
Supply of , ball and socket type tension fittings of EMS-70 KN for 11 KV and 33 KV system (EMS-70 KN) complete, as per technical specification of Section-V of the bid document,
390
-
-
... More
Erection of Composite Polymeric Disc Insulator, ball and socket type for 11 KV and 33 KV system (EMS-70 KN) including tension fittings of EMS-70, to accommodate the relevant ACSR conductor size along with nuts and bolts, washer etc. as required in complete as per direction of the Engineer-in-Charge.
390
-
-
... More
Supply of Polymeric Pin insulator set complete for 11 KV system as per Technical specification of Section-V of the bid document.
1200
-
-
... More
Erection of Polymeric Pin insulator set complete for 11 KV system as per direction of the Engineer-in-Charge.
1200
-
-
... More
Supply of Polymeric Pin insulator set complete for 33 KV system as per Technical specification of Section-V of the bid document.
42
-
-
... More
Erection of Polymeric Pin insulator set complete for 33 KV systemh necessary binding ctc. complete.
42
-
-
... More
Supply of Porcelin Shackle insulator of size 3"x3.1/2" for LT line conforming to IS: 1445/ 1977 with up to date amendment. including supply of nuts, straps & bolt etc. as required.
1488
-
-
... More
Erection of Porcelain Shackle Insulator (4x4.5" ) for LT system with mechanical strength of 5 KN conforming to ISS:731/1971 with hot dip galvanized M.S G.I Straps with bolts in complete (suitable for Rabbit/DOG conductor) as per direction of the Engineer-in-Charge
1488
-
-
... More
Supply and erection of earthing set as per ISS : 3043 of 1966 and with latest amendment if any, 2.5 mtr long G.I. pipe (ISI marked) of 40 mm diameter with suitable holes on pipe circumference including a pair of clamps (made of 50 X 6 mm M.S. flat), galvanized nuts & bolts alongwith alternate layers of salt & charcoal including supply of 4.0 mtr long, 12mm dia PVC pipe for each earthing set etc. as required and as per direction of the Engineer-in-Charge.
132
-
-
... More
Supply 11/0.433 KV, BIS certified, Energy efficiency level-II, Distribution transformer of following ratings, conforming to IS:-1180(Part-I) 2014,with bimetallic terminal connector and as per technical specification pf Section-V of the bid document. 25 KVA, 3-phase, 11/0.443 KV Distribution Transformer
6
-
-
... More
Supply 11/0.433 KV, BIS certified, Energy efficiency level-II, Distribution transformer of following ratings, conforming to IS:-1180(Part-I) 2014,with bimetallic terminal connector and as per technical specification pf Section-V of the bid document. 63 KVA, 3-phase 11/0.443 KV Distribution Transformer
6
-
-
... More
Supply 11/0.433 KV, BIS certified, Energy efficiency level-II, Distribution transformer of following ratings, conforming to IS:-1180(Part-I) 2014,with bimetallic terminal connector and as per technical specification pf Section-V of the bid document. 100 KVA, 3-phase, 11/0.443 KV Distribution Transformer
5
-
-
... More
Erection & Commissioning of 25 KVA, 3-phase, 11/0.443 KV Distribution Transformer on pole structure at a height of 2440 mm (approx) above GL in double MS Channel support (100X50X50X6 mm Channel) with all necessary accessories and fittings as per Technical Specification.
6
-
-
... More
Erection & Commissioning of 63 KVA, 3-phase, 11/0.443 KV Distribution Transformer on pole structure at a height of 2440 mm (approx) above GL in double MS channel support (100X50X50X6 mm Channel) with all necessary accessories and fittings as per Technical Specification.
6
-
-
... More
Erection & Commissioning of 100 KVA, 3-phase 11/0.443 KV Distribution Transformer on pole structure at a height of 2440 mm (approx) above GL in double MS channel support (100X50X50X6 mm channel) with all necessary accessories and fittings as per Technical Specification.
5
-
-
... More
Supply of single circuit rewireable porcelain Kit-kat fuse unit of 500V grade as per IS:- 2086/1993:- 200 Amps Cut-Out
60
-
-
... More
Supply of single circuit rewireable porcelain Kit-kat fuse unit of 500V grade as per IS:- 2086/1993:- 100 Amps Cut-Out
36
-
-
... More
Supply of 1100 Volt LT unarmoured single core , extruded PVC compound type ST-2, conforming to IS:- 5831/1984, testing specification- ISS: 1554 (P - I) / 1988 & IS:- 10810(method of test of cable) and supply of bimetallic lugs conforming to IS:- 8309: 1993, as required to meet the site condition:- 120 sqmm. PVC Cable
0.32
-
-
... More
Supply of 1100 Volt LT unarmoured single core , extruded PVC compound type ST-2, conforming to IS:- 5831/1984, testing specification- ISS: 1554 (P - I) / 1988 & IS:- 10810(method of test of cable) and supply of bimetallic lugs conforming to IS:- 8309: 1993, as required to meet the site condition:- 70 sqmm PVC Cable
0.68
-
-
... More
120 sqmm. Bi-metallic Lugs conforming to IS:- 8309: 1993
120
-
-
... More
Supply of Straps with Nuts & Bolts as per technical specification detailed at Section_v of the bid document.
290
-
-
... More
Fabricated D-Clamp made of 50X 6 mm MS flat.
200
-
-
... More
Suppy of PVC insulated & PVC sheathed stranded Aluminium conductor with inner & outer sheath of extruded PVC compound type ST-2 conforming to IS:- 5831-1994 and conforming to testing standard of 1554(part-I) and IS:- 10810, for providing Single phase/ Three phase Service connection:- 4 sq mm PVC Cable
5
-
-
... More
Suppy of PVC insulated & PVC sheathed stranded Aluminium conductor with inner & outer sheath of extruded PVC compound type ST-2 conforming to IS:- 5831-1994 and conforming to testing standard of 1554(part-I) and IS:- 10810, for providing Single phase/ Three phase Service connection:- 10 sq mm PVC Cable
2
-
-
... More
Making connection from Transformer LT side to overhead LT Line via fuse unit of unarmored PVC cable 1100-V grade conforming to ISS: 1554 (P-I) /1988 of the following sizes and the cables shall be properly crimped by bi-metallic lugs at contact areas as per direction of the Engineer-in-Charge.
20
-
-
... More
Supply and Erection of Protective Guarding by 8 SWG GI Wire as per technical specification along with 33 KV/ 11 KV Line across road/river/telecom line etc. in horizontal formation complete
900
-
-
... More
Supply and Erection of Protective Guarding by 8 SWG GI Wire as per technical specification along with LT Line across road/river/telecom line etc. in horizontal formation complete
500
-
-
... More
Supply of Danger Plate (HT) as per technical specification detailed in section-V of the bid document.
400
-
-
... More
Supply of Danger Plate (LT) as per technical specification detailed in section-V of the bid document.
140
-
-
... More
Erection of Danger Plate on HT/LT Poles
540
-
-
... More
Supply of barbed wires as per relevant IS, for use as anti-climbing devices on pole structures in helical form 7.5 cm. apart starting from ground level (1.5 Kg. / pole) as per direction of Engineer-in-charge.
1
-
-
... More
Erection of Anti-climbing devices viz barbed wire on existing pole structures including supply of barbed wire confirming to IS:278 having four points barbed spaced 75 (+/- 12) mm apart shall be wrapped helically with a pitch of 75 mm around the limb of support and firmly commencing from the height of 3.5 M and up to 5 or 6 M (1.5 Kg. / pole) as per direction of the Engineer-in-Charge.
620
-
-
... More
Supply and erection of Polythin pipe, 1/2" dia for drawing of GI wire for earthing connection.
170
-
-
... More
Grouting with CC of ratio 1:2:4 (1 cement : 2 river sand : 4 jhama brick aggregate of 20 mm. nominal size) ilc supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shuttering as required (@ 0.119 Cum per Steel Tubular Pole & @ 0.119 Cum per Stay Set, inclusive the cost of centering , Shuttering , propping and removal of forms etc .
105
-
-
... More
Applying priming coat with ready mixed primer of approved quality on top and middle section of Steel Tubular Poles along with brackets i/c. painting (two or more coats) with Aluminium paint of approved quality to give an even shade as per Technical Specification.
620
-
-
... More
Supply & erection of wooden plank (preferably karai wood) of size 24" x 10" x 1.5" for fitting, fixing of LT cut outs along with MS clamps, nuts & bolts and cable connections with termination by Lugs as per Specification.
20
-
-
... More
Supply & erection of fabricated copper strip size of 50x8 mm, 20 cm long with 4 nos hole to connect the cable/DT LT Stud as required as per direction of the Engineering-in-Charge.
18
-
-
... More
Providing Sub-Station protective fencing of 2.5 Mtr X 3.0 Mtr area,with Galvanized Steel (G.I.) chain link fence fabric conforming to IS:2721:2003, as per technical specification detailed in section-V of the bid document.
14
-
-
... More
Hiring of Maruti van for supervision of proposed & dismantled HT/LT line
100
-
-
... More
Schedule-B (Civil works)
-
-
-
... More
Earth work in excavation by manual means in foundation trenches or drains (nor exceeding 1.5 m in width or 10 sqmm on plan ) i/c dressing of sides and ramming of bottom, lift upto 1.5m i/c getting out the excavation soil and disposal of surplus excavated soil as directed within a lead of 50 m. for All kinds of soil , Boundary = 4x4x4.00x0.508x0.9 = 29.26 cum, Txr. Base = 4x2.1X2.1x0.45 = 7.938 cum.
37.2
-
-
... More
Supplying and Filling in plinth , under floor, foundation etc with sand from local querry with all lifts i/c spreading in horizontal layers, watering, grading to required slope,ramming, consulidating and compacting each layer , complete 4x4x4.00x0.508x0.075=2.44cum, 4x2.10x2.10x0.075= 1.32 cum. 4x 1.75x1.75x 1.1=13.5 cum.
17.27
-
-
... More
Providing and laying in foundation and plinth cement concrete 1:5:10 (1 cement:5river sand:10 jhama brick aggregate 40mm nominal size) excluding the cost of centering and shuttering 4x4x4.00x0.508x0.075 = 2.44 cum, Txr. Base= 4x2.10x 2.10 x0.075=1.32 cum, step = 4x0.90x0.90x0.075= 0.244 cum , total = 85.084 cum.
4
-
-
... More
Reinforced cement work in wall 1:2:4 (1 cement:2 river sand: 4 Jhama brick aggregate 20mm nominal size) excluding the cost of centering, shuttering and reinforcement including Lintels, Beams, plinth beam, griders, upto floor five level,(i) 4x4x4.00x0.25x0.15 = 2.4 cum.(ii) 4x 2x2x 0.10= 1.6 cum
4
-
-
... More
Mild steel & Medium / Tensile steel reinforcement for RCC work i/c straightening,cutting, bending, placing in position and binding all complete upto floor five level (i)10 mm dia cold twisted steel bar: 4x2x 14x 2x 0.6167 =70 kg (ii) 4x4x4x4x0.6167= 158 kg. lap & westage=10 % . Total 251 kg, (iii) 6mm dia plain bar, 4x4x40x0.65x0.22kg= 92 kg, Add wastage 10% , Total 100 Kg(Rounded).
351
-
-
... More
Centering & shuttering i/c struting, proping etc. and removing of the same for (b) Lintels, beam, girders, bresummers and cantilever with shuttering Ply.(i) 4x4x2x4.00x0.15=19.2 sqm. (ii) 4x4x2.1x. 0.15= 5.04 sqm. Total= 24.3 Sq m
24.3
-
-
... More
First class brick work in foundation and plinth in cement morter 1:5 (1 Cement: 5 River sand). Boundary=4x4x4x 0.60 x 0.254 = 9.75 cum, Txr. Base = 4x2.00x2.00x1.2x 0.254 =4.9 cum, Step=4x0.90x0.25x0.30=0.27cum and in side= 4x0.90x0.25x0.45=0.405cum, 4x0.90x0.254x0.60=0.54cum, 4x0.9x0.254x0.75=0.68cum, Total=38.992cum
16.6
-
-
... More
12mm cement mortar plaster of mix 1:5 (1 Cement: 5 river sand, boundary=4x4x4x1.45= 92.8 sqm and Txr. Base=4x4x2.00x1.05=33.6 sqm, 4x2.00x2.00=16sqm, Steps 4x 0.9x 1.4= 5.04, steps side 4x2x 0.3= 2.4 sqm, Total=150 sqm.
150
-
-
... More
Providing structural Steel work revited, bolted or welded in built up sections trusses & framed work, i/c cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required (a) in tees, angles and channels. Size of angle 65x65x6mm (W/m=5.8Kg), 4x12x2.0x 5.8 = 560 kg, Size of angle 50x50x6mm (W/m=4.54Kg) 4x2x 14.5 x 4.54 = 527 Kg, 4x 2x 5.5x 4.54= 200 Kg, Total= 1290 kg.(rounded)
1290
-
-
... More
Providing & fixing of hard drawn steel wire fabrick 75x25 mesh of weight not less than 7.75kg per sqm to frames ,bolted or welded i/c cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required etc. 4x 14.5x1.25=72.5 sqm, , 4x2x1.25x 0.75 = 7.5 sqm, Total = 80 sqm.
80
-
-
... More
Cutting, clearing & disposal of jungle/tree of any girth from 3(three) meter either side of HT/LT line of providing required vertical and horizontal clearance as per provision of I.E. Rule.
18
-
-
... More
Numbering of Pole/DT with black Japper paint after applying priming coats by red oxide primer followed by a painting 2 or more coats with synthetic enamel paint (Yellow Colour) of approved quality within a area of 8"X14" on pole /DT as reqd. as per direction of the Engineer-in-Charge. 3-phase 11/0.433 KV Distribution Transformers
17
-
-
... More
LT/HT Composit pole
250
-
-
... More
Schedule - C Uprooting / Dismantling and Re Erection with carrying of the items upto work side/ site storeyard of TSECL.
-
-
-
... More
Uprooting of 9 mtr. Long PCC Pole.
201
-
-
... More
Re erection of 9 mtr. Long PCC Pole.
90
-
-
... More
Uprooting of 8 Mtr. Long PCC pole.
90
-
-
... More
Re erection of 8 Mtr. Long PCC pole.
25
-
-
... More
Up rooting of Stud by 9 mtr. Long PCC Pole
2
-
-
... More
Up rooting of 9 mtr. Long S.T Pole.
45
-
-
... More
Re erection of 9 mtr. Long S.T Pole.
5
-
-
... More
Up rooting of 11 mtr. Long S.T Pole.
18
-
-
... More
Up rooting of 8 mtr. Long S.T Pole.
28
-
-
... More
Up rooting of Rail Pole 90 lb
10
-
-
... More
Dismantaling & Up rooting of Stay set complete.
60
-
-
... More
Re erection of Stay set complete.
14
-
-
... More
Dismantaling of SP top bracket including clamp nuts & bolts., for 11 KV / 33 KV line
75
-
-
... More
Re erection of SP top bracket (0.3 m long of channel size 75x40x40x6mm) for 11 KV / 33 KV line.
58
-
-
... More
Dismantaling of SP bottom bracket including clamp nuts & bolts for 11 KV / 33 KV line.
75
-
-
... More
Re erection of SP bottom bracket (1.3 m long of channel size 75x40x40x6mm) for 11 KV line.
58
-
-
... More
Dismantling of SP guard bracket including clamp nuts & bolts.forfor 11 KV / 33 KV line.
66
-
-
... More
Re erection of SP guard bracket including clamp nuts & bolts.for for 11 KV / 33 KV line.
58
-
-
... More
Dismantling of DP top / bottom bracket including clamp nuts & bolts, for 11 KV / 33 KV line.
64
-
-
... More
Re erection of DP top / bottom bracket including clamp nuts & bolts, for 11 KV / 33 KV line.
44
-
-
... More
Dismantling of DP guard bracket including clamp nuts & bolts,for 11 KV / 33 KV line.
30
-
-
... More
Re erection of DP guard bracket including clamp nuts & bolts,for 11 KV / 33 KV line.
24
-
-
... More
Dismantling of 1.7 m long Channel of size 75x40x40x6mm of 11 KV double feeder line bracket.including clamp nuts & bolts.
360
-
-
... More
Re erection of of 1.7 m long Channel of size 75x40x40x6mm of 11 KV double feeder line bracket.including clamp nuts & bolts.
74
-
-
... More
Dismantling of 2.2 m long Angle of size 65x65x6mm of 11 KV double feeder line bracket.including clamp nuts & bolts.
120
-
-
... More
Re erection of 2.2 m long Angle of size 65x65x6mm of 11 KV double feeder line bracket.including clamp nuts & bolts.
74
-
-
... More
Dismantling of Sub-station bracket (2.8 m long of Channel of size 100x50x50x6mm).including clamp nuts & bolts.
38
-
-
... More
Re erection of Sub-station bracket (2.8 m long of Channel of size 100x50x50x6mm).including clamp nuts & bolts.
32
-
-
... More
Dismantling of Sub-station bracket (2.8 m long of Channel of size 75x40x40x6mm).including clamp nuts & bolts.
56
-
-
... More
Re erecton of Sub-station bracket (2.8 m long of Channel of size 75x40x40x6mm).including clamp nuts & bolts.
48
-
-
... More
Dismantling of Sub-station bracket (2.8 m long of Angle of size 65x65x6mm).including clamp nuts & bolts.
14
-
-
... More
Re erection of Sub-station bracket (2.8 m long of Angle of size 65x65x6mm).including clamp nuts & bolts.
9
-
-
... More
Dismantling of Sub-station bracket (0.6 m long of Angle of size 100x50x50x6mm).including clamp nuts & bolts.
24
-
-
... More
Re erection of Sub-station bracket (0.6 m long of Angle of size 100x50x50x6mm).including clamp nuts & bolts.
24
-
-
... More
Dismantling of Horizontal/ diagonal cross bracing (angle of size 65x65x6mm)including clamp nuts & bolts.
20
-
-
... More
Re erection of Horizontal/ diagonal cross bracing (angle of size 65x65x6mm)including clamp nuts & bolts.
20
-
-
... More
Dismantling of DP bracket (2.2m long of channel size 75x40x40x6mm/ Angle size 65x65x6mm) for 11 KV GOS/DOF.including clamp nuts & bolts.
10
-
-
... More
Re erection of DP bracket (2.2m long of channel size 75x40x40x6mm / Angle size 65x65x6mm) for 11 KV GOS/DOF.including clamp nuts & bolts.
10
-
-
... More
Dismantling of LT 4 wire bracket (1.1m long of Angle of size 50x50x6mm).including clamp nuts & bolts.
186
-
-
... More
Re erection of LT 4 wire bracket (1.1m long of Angle of size 50x50x6mm).including clamp nuts & bolts.
186
-
-
... More
Re erection of LT 2 wire bracket (0.55m long of Angle of size 50x50x6mm).including clamp nuts & bolts.
186
-
-
... More
Dismantling of LT 2 wire bracket (0.55m long of Angle of size 50x50x6mm).including clamp nuts & bolts.
186
-
-
... More
Dismantling of Height extension bracket (2.5m long of Channel 75x40x40x6 mm).including clamp nuts & bolts.
10
-
-
... More
Dismantling of 315 KVA Transformer with PVC cable connection & Cut out circuits
1
-
-
... More
Re erection & commissionng of 315 KVA Transformer with all necessory accessories and fittings.
1
-
-
... More
Dismantling of 200 KVA Transformer with PVC cable connection & Cut out circuits
3
-
-
... More
Re erection & commissionng of 200 KVA Transformer with all necessory accessories and fittings.
3
-
-
... More
Dismantling of 100 KVA Transformerwith PVC cable connection & Cut out circuits
6
-
-
... More
Re erection & commissionng of 100 KVA Transformer with all necessory accessories and fittings.
6
-
-
... More
Dismantling of 63 KVA Transformer
4
-
-
... More
Re erection & commissionng of 63 KVA Transformer with all necessory accessories and fittings.
3
-
-
... More
Dismantling of 25 KVA Transformer with PVC cable connection & Cut out circuits
3
-
-
... More
Re erection & commissionng of 25 KVA Transformer with all necessory accessories and fittings.
3
-
-
... More
Dismantling of triple pole 11 KV GOS with necessary connections.
18
-
-
... More
Re erection of triple pole 11 KV GOS with necessary connections.
3
-
-
... More
Dismantling of triple pole 11 KV DO fuse unit with necessary connections.
18
-
-
... More
Re erection of triple pole 11 KV DO fuse unit with necessary connections.
3
-
-
... More
Dismantling of triple pole 11 KV LA set with necessary connections.
15
-
-
... More
Re erection of triple pole 11 KV DO fuse unit with necessary connections.
15
-
-
... More
Dismantling of Shackle insulator of 3"x3.1/2" size with straps & bolts.
968
-
-
... More
Re erection of Shackle insulator of 3"x3.1/2" size with straps & bolts.
98
-
-
... More
Dismantling 11 KV Porcelin Disc insulator (45 KN) with fittings..
684
-
-
... More
Re erection of 11 KV Porcelin Disc insulator (45 KN) with fittings..
56
-
-
... More
Dismantling of 11 KVPorcelin Pin insulator (45 KN) with GI pin.
900
-
-
... More
Re erection of of 11 KVPorcelin Pin insulator (45 KN) with GI pin.
66
-
-
... More
Dismantling of 33 KVPorcelin Pin insulator with GI Pin..
24
-
-
... More
Re erection of 33 KVPorcelin Pin insulator with GI Pin..
9
-
-
... More
Dismanltling and coiling of ACSR Dog (7/1.57/64.72 mm/AAAC.
2.4
-
-
... More
Dismanltling and coiling of ACSR (6/1/2.59 mm.
88
-
-
... More
Dismanltling and coiling of GI guard wire (8SWG).
58
-
-
... More
Dismanltling of Cradle guard (HT/LT).
950
-
-
... More
Re erection of Cradle guard (HT/LT).
150
-
-
... More
Dismantling and re erection of Service connection (single phase).
2210
-
-
... More
Dismantling and re erection of Service connection (three phase).
45
-
-
... More
Dismantling of Sub-station fencing i/c gate, barbed wire etc.
7
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements