Tripura State Electricity Corporation Limited Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Costs
EMD
₹ 11,99,932Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Augmentation By Capacity Addition Of 1 X 10/16 Mva, 132/33 Kv Transformer With Associated Equipments And Civil Works At 132 Kv Sub Station, Garodtilla, Kamalpur Under Ipds
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_POWER_4021_1Bid Award Id
ViewTender No
59/GM(Tech)/TSECL/IPDS/KMP SS(Ph-II)/2018-19Tender Authority
Tripura State Electricity Corporation Limited ViewPurchaser Address
-Website
http://https://www.tsecl.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
132 KV, 2500 Amp horizontally centre rotating type double break isolator with post insulator mechanical inter locking arrangement. With out earth switch
5
-
-
132 KV single phase out-door type oil cooled wound primary type 4 core CT as per IS 2705. 100/1-1-1-0.577A
4
-
-
132 KV Control relay and meter panel duplex corriodor type sheet steel cubicle complete with wiring links fuses internal illumination, ammeter, voltmeter, frequency meter, Tri-vector Meter, Numerical differential relay, Numerical over current and earth fault relay, auxiliary relay, master trip relay, etc. for Transformer.
1
-
-
132 KV Control relay and meter panel duplex corriodor type sheet steel cubicle complete with wiring links fuses internal illumination, ammeter, voltmeter, frequency meter, Tri-vector Meter, auxiliary relay, master trip relay, etc. for Bus-coupler.
1
-
-
120 KV,single phase, 50Hz station type 10KA heavy duty type LA solidly grounded neutral system for 132 KV system with surge counter and terminal connectors suitable to moose conductor.
4
-
-
Sub- Station Bus Bar materials for 132 KV, i/nc equipment bus materials, complete with Al. Tube of OD 60mm, in/c Disc & Post Insulators, Earth bonds, nuts & bolts, conductors, connectors, Clamps etc.complete with required ACSR conductor, all accessories and fittings to complete the bus bar arrengements as per direction of the Engineer-In-Charge. ACSR Moose conductor 7/3.15mm GI Sheilding wire Al. Tube of OD 60mm, 132 KV Post Insulator 11KV 120KN Disc Insulator Clamps and connectors, fittings etc. as per requirement to complete the 132 KV bus-bar and bay.
1
-
-
30 KV,single phase, 50Hz station type 10KA heavy duty type LA solidly grounded neutral system for 33 KV system with surge counter and terminal connectors suitable to ACSR Panther conductor.
15
-
-
33 KV,1250 Amp horizontally centre rotating type double break isolator with post insulator mechanical inter locking arrangement. With earth switch
2
-
-
Without earth switch
9
-
-
33 KV, 1250A, 750MVA breaking capacity, Outdoor type SF6 Circuit Breaker complete with motor operated spring closing (Local / Remote) arrangement with all accessories and supporting structure complete operative on 110V DC.
4
-
-
33KV, Single Phase, Outdoor type CT with suitable burden & class of accuracy complete with associated terminal box connecting link etc. 4 Core CT of ratio 400/1-1-1-.577A .
4
-
-
3 Core CT of ratio 400-200 /1-1-1 A .
9
-
-
33 KV Control & Relay Panel, simplex type, sheet steel cubicles complete with internal wiring, Numerical over current and earth fault relay, auxiliary relay, master trip relay, Tri-vector Meter suitable for 3 phase, 4wire unbalanced load, 3- ammeters, 1-volt meter with selector switch, links, fuses, interior illumination etc for Transformer.
1
-
-
33 KV Control & Relay Panel, simplex type, sheet steel cubicles complete with internal wiring, one set of Numerical over current and earth fault relay, auxiliary relay, master trip relay, Tri-vector Meter suitable for 3 phase, 4wire unbalanced load, 3- ammeters, 1-volt meter with selector switch, links, fuses, interior illumination etc for outgoing feeder.
2
-
-
33 KV Control & Relay Panel, simplex type, sheet steel cubicles complete with internal wiring, auxiliary relay, master trip relay, Tri-vector Meter suitable for 3 phase, 4 wire unbalanced load, 3- ammeters, 1-volt meter with selector switch, links, fuses, interior illumination etc for bus-coupler feeder.
1
-
-
Sub- Station Bus Bar materials for 33KV, complete with Al. Tube of OD 40mm for equipment bus, in/c Disc & Post Insulators, Earth bonds, nuts & bolts, ACSR Panther conductors, connectors, Clamps etc.complete with all accessories and fittings to complete the bus bar arrengements as per direction of the Engineer-In-Charge. ACSR Panther Conductor (30/7/3.00 mm) 7/3.15mm GI Sheilding wire 33 KV Post Insulator 11KV 120KN Disc Insulator Clamps and connectors, fittings etc. as per requirement to complete the 33KV Bus-bar and Bay.
1
-
-
33KV single phase outdoor type PT 33KV / √3 / 110V / √3 / 110V / √3 (PS) volt with suitable burden and class of accuracy.
4
-
-
Design, Engineering, manufacturing, Supply & Laying of Single Core, 19 / 33 KV, 300 Sq. mm. XLPE insulated, screened armoured power cable as per TSECL approved design, drawing, specification and as reqd. as per direction of Eng-In-Charge and detailed herein after in the bid document.
1
-
-
Design, Engineering, Supply of Outdoor type heat shrink end jointing kit for Single core, 300 Sq.mm. Size, XLPE insulated Power Cable of grade 19//33KV(E), as per IS 7098 Part-II 1985 and latest ammended.
8
-
-
Supply,Testing and commissioning of 1.1KV graded PVC Insulated (sheathed) 2.5 sq.mm. copper (Stranded) armoured control cable. 12 core
2250
-
-
7 core
2375
-
-
4 core
2000
-
-
2 core
1275
-
-
Galvanised Steel Structure for gantry & equipments with Hot Dip Nut Bolts and washer etc. for fastener and foundation nut bolts.
53
-
-
60 Nos. Lead Acid battery for 110V DC supply of capacity 300AH at 10 hour discharge rate complete in all respect with connectors, wooden standard stand etc.
1
-
-
Battery Charger suitable for 110 V DC VRLA 300 AH capacity Battery Bank complete with protective and control gear.
1
-
-
Supply, testing and commissioning of 11 KV Incoming Vaccum Circuit breaker, Control & relay panel simplex type, 350 MVA rupturing capacity, 1250A rated current, complete with electrical closing mechanism with internal wiring, one set of Numerical over current & earth fault relay, master trip relay, AC & DC Supervision Relay, 1- volt meter with selector switch, 3- ammeter, Tri-vector Meter, 4- core CT with ratio 1200-600 / 1-1-1-0.577 A. with P.T. of PTR 11 KV / √3 / 110V / √3 with integral earthing facility and internal arc tested for Incomer Panel.
1
-
-
Supply, testing and commissioning of 11 KV Outgoing Vacuum Circuit breaker, Control & relay panel simplex type, 350 MVA rupturing capacity, 1250A rated current, complete with electrical closing mechanism with internal wiring, one set of Numerical over current & earth fault relay, master trip relay, 3-ammeter, power factor meter, AC & DC Supervision Relay, Tri-vector Meter, 2- core CT with ratio 400-200 / 1-1 A with integral earthing facility and internal arc tested for Outgoing Panel.
5
-
-
AC LT distribution board 430 V, 3-ph, 4-W power supply, 200A capacity (Make - Amaraja)
1
-
-
110V DC distribution board totally enclosed metal clad type complete (Make - Amaraja)
1
-
-
Sub Station Earthing materials complete as per requirement of installed Transformer & electrical equipments fault calculation design. 40 mm Dia, 6 mtr long MS Rod Earthing Electrode
40
-
-
40 mm dia MS Rod for isolator Aux Mat with Dimension of 1500 x 1500 mm having 300 mm spacing
8
-
-
50 x 10 mm GS Flat for equipement and structure earthing for main earth mat and risers
3500
-
-
Fire fighting equipments with complete accessories. i) G.I. bucket of capacity 10 Ltr. With wooden stand
6
-
-
ii) Portable fire extinguisher using halogen.
6
-
-
iii) Dry chemical powder type fire extinguisher a) 5 Kg.
4
-
-
b) 2 Kg.
4
-
-
(iv) Soda acid type portable extinguisher (wall mounting type)
6
-
-
Laminated Shock treatment chart and fitted in a frame for display on wall as per direction of Engineer-in-charge.
1
-
-
Rubber mat of size 2M x 1M
5
-
-
First aid box with first aid materials & fixing arrangement on wall as per direction of Engineer-in-charge.
2
-
-
90 lb/yard rail for transformer track
2
-
-
Digital Oil testing set (Megger Make)
1
-
-
SF6 Gas Leakage Detector
1
-
-
Digital Earth resistance tester (Megger Make)
1
-
-
Thermo Vision Camera for detection of hot spot
1
-
-
MiliAmp AC Clamp Meter (Fluke/Megger Make)
1
-
-
Discharge Rod three section made of glass tube complete with all accessories.
4
-
-
Digital Clamp Meter: AC /DC Voltage : 600V, AC Current : 1000A, Resistance : 40 MΩ, Display : LCD (Fluke / Megger Make)
1
-
-
Switchyard Ligthing complete with 250 W LED Light fittings complete
17
-
-
11KV outgoing Bus-bar material
1
-
-
Dismantling of old 11KV outgoing Bus-bar material
1
-
-
SCHEDULE - B (Erection, installation & commissioning of Sub-Station equipments, control gear and structures)
-
-
-
Erection,testing and commissioning of 132/33 KV, 10/16 MVA ONAN/ONAF YNyn0 two winding Power Transformer with off load tap changer at HV side with tapping range ± 10.0% in equal steps of 2.5 % complete with First filling of EHV grade oil.
1
-
-
145 KV, 3 pole outdoor class SF6 Circuit Breaker of 2500 A rated normal current and breaking capacity 7500 MVA rated symmetrical breaking current 40 KA with required motor operated spring charge mechanism with supporting Structure and standard accessories & tools complete with all accessories.
2
-
-
132 KV, 2500 Amp horizontally centre rotating type double break isolator with post insulator mechanical inter locking arrangement. With out earth switch
5
-
-
132 KV single phase out-door type oil cooled wound primary type 4 core CT as per IS 2705. 100/1-1-1-0.577A
4
-
-
132 KV Control relay and meter panel duplex corriodor type sheet steel cubicle complete with wiring links fuses internal illumination, ammeter, voltmeter, frequency meter, Tri-vector Meter, Numerical differential relay, Numerical over current and earth fault relay, auxiliary relay, master trip relay, etc. for Transformer.
1
-
-
132 KV Control relay and meter panel duplex corriodor type sheet steel cubicle complete with wiring links fuses internal illumination, ammeter, voltmeter, frequency meter, Tri-vector Meter, auxiliary relay, master trip relay, etc. for Bus-coupler.
1
-
-
120 KV,single phase, 50Hz station type 10KA heavy duty type LA solidly grounded neutral system for 132 KV system with surge counter and terminal connectors suitable to moose conductor.
4
-
-
Sub- Station Bus Bar materials for 132 KV, i/nc equipment bus materials, complete with Al. Tube of OD 60mm, in/c Disc & Post Insulators, Earth bonds, nuts & bolts, conductors, connectors, Clamps etc.complete with required ACSR conductor, all accessories and fittings to complete the bus bar arrengements as per direction of the Engineer-In-Charge. ACSR Moose conductor 7/3.15mm GI Sheilding wire Al. Tube of OD 60mm, 132 KV Post Insulator 11KV 120KN Disc Insulator Clamps and connectors, fittings etc. as per requirement to complete the 132 KV bus-bar and bay.
1
-
-
30 KV,single phase, 50Hz station type 10KA heavy duty type LA solidly grounded neutral system for 33 KV system with surge counter and terminal connectors suitable to ACSR Panther conductor.
15
-
-
33 KV,1250 Amp horizontally centre rotating type double break isolator with post insulator mechanical inter locking arrangement. With earth switch
2
-
-
Without earth switch
9
-
-
33 KV, 1250A, 750MVA breaking capacity, Outdoor type SF6 Circuit Breaker complete with motor operated spring closing (Local / Remote) arrangement with all accessories and supporting structure complete operative on 110V DC.
4
-
-
33KV, Single Phase, Outdoor type CT with suitable burden & class of accuracy complete with associated terminal box connecting link etc. 4 Core CT of ratio 400/1-1-1-.577A .
4
-
-
3 Core CT of ratio 400-200 /1-1-1 A .
9
-
-
33 KV Control & Relay Panel, simplex type, sheet steel cubicles complete with internal wiring, Numerical over current and earth fault relay, auxiliary relay, master trip relay, Tri-vector Meter suitable for 3 phase, 4wire unbalanced load, 3- ammeters, 1-volt meter with selector switch, links, fuses, interior illumination etc for Transformer.
1
-
-
33 KV Control & Relay Panel, simplex type, sheet steel cubicles complete with internal wiring, one set of Numerical over current and earth fault relay, auxiliary relay, master trip relay, Tri-vector Meter suitable for 3 phase, 4wire unbalanced load, 3- ammeters, 1-volt meter with selector switch, links, fuses, interior illumination etc for outgoing feeder.
2
-
-
33 KV Control & Relay Panel, simplex type, sheet steel cubicles complete with internal wiring, auxiliary relay, master trip relay, Tri-vector Meter suitable for 3 phase, 4 wire unbalanced load, 3- ammeters, 1-volt meter with selector switch, links, fuses, interior illumination etc for bus-coupler feeder.
1
-
-
Sub- Station Bus Bar materials for 33KV, complete with Al. Tube of OD 40mm for equipment bus, in/c Disc & Post Insulators, Earth bonds, nuts & bolts, ACSR Panther conductors, connectors, Clamps etc.complete with all accessories and fittings to complete the bus bar arrengements as per direction of the Engineer-In-Charge. ACSR Panther Conductor (30/7/3.00 mm) 7/3.15mm GI Sheilding wire 33 KV Post Insulator 11KV 120KN Disc Insulator Clamps and connectors, fittings etc. as per requirement to complete the 33KV Bus-bar and Bay.
1
-
-
33KV single phase outdoor type PT 33KV / √3 / 110V / √3 / 110V / √3 (PS) volt with suitable burden and class of accuracy.
4
-
-
Design, Engineering, manufacturing, Erection & Laying of Single Core, 19 / 33 KV, 300 Sq. mm. XLPE insulated, screened armoured power cable as per TSECL approved design, drawing, specification and as reqd. as per direction of Eng-In-Charge and detailed herein after in the bid document.
1
-
-
Design, Engineering, Erection of Outdoor type heat shrink end jointing kit for Single core, 300 Sq.mm. Size, XLPE insulated Power Cable of grade 19//33KV(E), as per IS 7098 Part-II 1985 and latest ammended.
8
-
-
Erection,Testing and commissioning of 1.1KV graded PVC Insulated (sheathed) 2.5 sq.mm. copper (Stranded) armoured control cable. 12 core
2250
-
-
7 core
2375
-
-
4 core
2000
-
-
2 core
1275
-
-
Galvanised Steel Structure for gantry & equipments with Hot Dip Nut Bolts and washer etc. for fastener and foundation nut bolts.
53
-
-
60 Nos. Lead Acid battery for 110V DC supply of capacity 300AH at 10 hour discharge rate complete in all respect with connectors, wooden standard stand etc.
1
-
-
Battery Charger suitable for 110 V DC VRLA 300 AH capacity Battery Bank complete with protective and control gear.
1
-
-
Erection, testing and commissioning of 11 KV Incoming Vaccum Circuit breaker, Control & relay panel simplex type, 350 MVA rupturing capacity, 1250A rated current, complete with electrical closing mechanism with internal wiring, one set of Numerical over current & earth fault relay, master trip relay, AC & DC Supervision Relay, 1- volt meter with selector switch, 3- ammeter, Tri-vector Meter, 4- core CT with ratio 1200-600 / 1-1-1-0.577 A. with P.T. of PTR 11 KV / √3 / 110V / √3 with integral earthing facility and internal arc tested for Incomer Panel.
1
-
-
Erection, testing and commissioning of 11 KV Outgoing Vacuum Circuit breaker, Control & relay panel simplex type, 350 MVA rupturing capacity, 1250A rated current, complete with electrical closing mechanism with internal wiring, one set of Numerical over current & earth fault relay, master trip relay, 3-ammeter, power factor meter, AC & DC Supervision Relay, Tri-vector Meter, 2- core CT with ratio 400-200 / 1-1 A with integral earthing facility and internal arc tested for Outgoing Panel.
5
-
-
AC LT distribution board 430 V, 3-ph, 4-W power supply, 200A capacity (Make - Amaraja)
1
-
-
110V DC distribution board totally enclosed metal clad type complete (Make - Amaraja)
1
-
-
Sub Station Earthing materials complete as per requirement of installed Transformer & electrical equipments fault calculation design. 40 mm Dia, 6 mtr long MS Rod Earthing Electrode
40
-
-
40 mm dia MS Rod for isolator Aux Mat with Dimension of 1500 x 1500 mm having 300 mm spacing
8
-
-
50 x 10 mm GS Flat for equipement and structure earthing for main earth mat and risers
3500
-
-
Fire fighting equipments with complete accessories. i) G.I. bucket of capacity 10 Ltr. With wooden stand
6
-
-
ii) Portable fire extinguisher using halogen.
6
-
-
iii) Dry chemical powder type fire extinguisher a) 5 Kg.
4
-
-
b) 2 Kg.
4
-
-
(iv) Soda acid type portable extinguisher (wall mounting type)
6
-
-
Laminated Shock treatment chart and fitted in a frame for display on wall as per direction of Engineer-in-charge.
1
-
-
First aid box with first aid materials & fixing arrangement on wall as per direction of Engineer-in-charge.
2
-
-
90 lb/yard rail for transformer track
2
-
-
Switchyard Ligthing complete with 250 W LED Light fittings complete
17
-
-
11KV outgoing Bus-bar material
1
-
-
Dismantling of old 11KV outgoing Bus-bar material
1
-
-
SCHEDULE -C Internal Electrification
-
-
-
Wiring for light/fan/exhaust fan/callbell point with 1.5 sq mm pvc insulated. Cu condoctor cable in pvc casing capping etc. as reqd. a) Short Point:-
50
-
-
b) Medium Point :-
30
-
-
c) Long Point :-
30
-
-
Wiring for 3 pin 5/6 amps plug point with 1.5 sq mm pvc insu. allu. condo cable in pvc casing capping ilc providing & fixing 3 pin 5/6 amps socket outlet & 5/6 amps piano type switch earthing the 3rd pin etc. as reqd
28
-
-
Wiring for 3 pin 15/16 amps plug point with 4 sq mm pvc insu. allu. condo cable in pve casing capping ilc providing & fixing 3 pin 5/6 amps socket outlet & 5/6 amps piano type switch earthing the 3rd pin etc. as reqd
28
-
-
Supplying and fixing of accessories for PVC casing and capping in/c. necessary connection as required. Make: - Anchor / Precision / Cona (Nice) / SSK / J.J. Deluxe (Fancy). a) Ceiling rose.
80
-
-
b) Angle lamp holder.
80
-
-
c) 5/6 Amp. piano switch.
100
-
-
Supplying and fixing of accessories for PVC casing and capping in/c. necessary connection as required. a) 102 mm X 102 mm, size wooden formica board with bakelite cover.
60
-
-
b) 102 mm X 178 mm, size wooden formica board with bakelite cover.
16
-
-
c) 152 mm X 203 mm, size wooden formica board with bakelite cover.
8
-
-
d) 203 mm X 300 mm, size wooden formica board with bakelite cover.
12
-
-
e) 254 mm X 300 mm, size wooden formica board with bakelite cover.
8
-
-
Wiring for circuital submain wiring with the following sizes pvc insulated ISI marked. Cu. cable in pvc casing capping etc. as reqd( Finolex/Havells) a) 2 x 1.5 sq mm
880
-
-
b) 2 x 4 sq mm
350
-
-
c) 4 x 10 sq mm
110
-
-
d) 2 x 6 . sq mm
70
-
-
Earthing with G.I. earth pipe 4.5 mtrs long & 40 mm dia with masonary enclosure on the top etc as reqd.
5
-
-
Extra for using salt & charcoal, coke for pipe earth electrode as reqd
4
-
-
Providing & fixing of 4.06mm (8SWG) dia G.I. wire in 19 mm dia polythene pipe in recess for loop earthing
60
-
-
Supplying & drawing 4 sq mm Allu.. condo cable for loop earthing along with other wires as reqd
870
-
-
Supply, Installation, testing & commissioning of ceiling fan (48 inch sweep) with all accessories i/c speed regulator, canopy, down rod of standard length( upto 30 cm )etc. as reqd and also required supplying, fixing and fabrication of extra down rod wherever necessary.(Usha / Khaitan/ Cromptom / Orient )
37
-
-
Supplying & fixing of busbar chamber with 4 strips busbar of length 300 mm made of allu. alloy or wrought alloy suitable for 100 amps capacity with all accessories i/c painting etc. as reqd (GECD make)
2
-
-
Supplying & fixing of 25mm x 25mm x 6mm size MS angle frame with 20 cm long 4 nos legs grouted on wall by 1 :2:4 cc work i/c providing & fixing 25 mm gamair wooden plank ile painting etc as reqd
4
-
-
Supplying & fixing of following TPN main switch (rew) 450 volts i/c drilling holes on board/M.S. Clamp connections etc. as reqd.(cat-B) (Havells/HPL) a) 100 amps TPN
2
-
-
b) 63ampsTPN
2
-
-
Supplying & fixing of following metal enclosure for 240/415 volts MCB single pole or Isolator complete with busbar, earth bar, neutral link, dinrail etc i/c conn. as reqd (cat-B) (Havells/HPL) a) 8 way
2
-
-
b) 6 way DB
2
-
-
c) 4 way DB
6
-
-
Supplying & fixing of 5 to 32 amps rating 240 volts 'G' series MCB of' single pole in the existing MCB DB complete with connection etc; as reqd. (Cat:-B)
50
-
-
Supplying & fixing of 230 mm sweep exhaust fan in existing hole i/c conn
4
-
-
Supplying & fixing of necessary shutter for 230 mm sweep exhaust fan in existing hole i/c necessary conn. as reqd
4
-
-
Supplying & fixing of Ding Dong callbell i/c necessary conn. etc as reqd.
4
-
-
Supplying & fixing of electronic musical call bell i/c necessary conn. etc as rcqd
2
-
-
Supplying & fixing of 32 amps DP switch (kitkat) i/c necessary connections as reqd.
7
-
-
Supplying and fixing of single box type FTL fittings complete with 1 no. 40 / 36 watt copper ballast, 40/36 watt flurosent tube, starter, holder, pf improving capacitor etc. in/c. connection as required. (Make: - Phillips / Havells/ Crompton / Bajaj).
30
-
-
Supplying and fixing of double box type T 5 rated energy efficent FTL fittings complete with 2 nos. 40 / 36 watt copper ballast, 2 nos. 40/36 watt flurosent tube, starter, holder, pf improving capacitor etc. in/c. connection as required. (Make: - Phillips /Havells/ Crompton / Bajaj).
24
-
-
Supplying & fixing of fancy bracket light tittings complete with 1 no 11 watt CFL light glass cover, holder etc i/c conn. as reqd:- (Crompton/Havells make)
24
-
-
Erection of IPDS Sign board with providing 1.6mm thickness MS Sheet (6X4) ft-(lengthX bradth) size of Iron sheet i/c painting of board by screen printing method,6ft height board from ground level,support L type angle(3'' X3'',6mm thickness),1.50 ft length of angle to be buried in the ground with 1ft hole pass inside with grouting etc as per approved drawing,design & technical specification and scope of work.
4
-
-
(CIVIL WORKS) i) Equipment foundations:
-
-
-
Earth work in excavation over areas exceeding 30 cm. in depth 1.5 m in width as well as 10 sqm. on plan in/c. disposal of excavated earth lead upto 50 m and lift upto 1.5 m disposed earth to be levelled and neatly dressed. a) All kinds of soil
150.5
-
-
Earth work in excavation in foundation trenches or drains (not exceeding 1.52 m in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift up to 1.5m , including getting out the excavated soil and disposal of surplus excavated soil. All kinds of soil. i) by manual means.
632.5
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering , lead up to 50m and lift up to 1.5m.All kinds of soil.
421.33
-
-
Supplying and filling in plinth , under floor ,foundations etc. with sand (fine) from local quarry with all lifts including spreding in horizontal layers, watering , greading to required slope, reamming, consolidating and compacting each layrt by using pl
29.74
-
-
Providing and laying in position cement concrete of specfied grade excluding the cost of centering and shuttering. All work up to plinth level. i) 1:2:4 ( 1cement:2 fine sand:4 graged stone aggregate 20mm nominal size)
2.5
-
-
ii) 1:3:6(1cement:3fine sand :6 graded stone aggregate 20mm nominal size)
38.9
-
-
iii) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size)
225.75
-
-
Providing and laying in position specified grade of reinfroced cement concrete excluding the cost of centerting ,shuttering , finishing and reinforcement .All work upto plinth level: i) 1:1.5:3 ( 1 Cement 1.5 fine sand :3 graded stone aggragate 20mm nominal size.)
325.75
-
-
Centering shuttering including strutting, propping etc. and removal of form work for :- Foundations, footings, bases for columns etc. for mass concrete with steel formwork
325
-
-
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to floor five level. i) Thermo -Mechanically treated bars/ Cold twisted deformed steel bars.
8250.5
-
-
First class brick work in foundation and plinth including cost of all materials as requied complete:- i) In cement mortor 1:6 (1 Cement :6 fine sand)
85.75
-
-
Half brick masonary work with first class bricks in foundation and plinth including cost of all materials as required complete:- i) In cement mortor 1:4 (1 Cement :4 fine sand)
25.75
-
-
12mm Cement plaster in single layer including cost of materials required and even and smooth and curing complete. i) In cement mortor 1:6 (1 Cement :6 fine sand)
175.5
-
-
Neat cement punning.
175.5
-
-
Providing structural steel work in single section fixed with out connection plate including cutting, hoisting , fixing in position and applying a priming coat of approved steel primer all complete as required.
450.45
-
-
Providing , hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses , bands copings, bed plates , anchor blocks , plain window sills and the like including the cost of required centering, shuttering, finishing.
7.5
-
-
Supplying and spreading of stone HG metel 20 mm to 40 mm size having electrical resistivity not less than 2500 kilo-ohm in switch yard with thickness 100 over PCC including antiweed treatment complete as per direction of the Engineer-In-Charge.
652.5
-
-
Providing and fixing hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 Kg per sqm to out side fancing filled with M.S. angle or flat framed by electric welding as per direction of the Engineer- In- Charge.(Frame work to be paid separately.)
75
-
-
Labour charge for collection, stacking, screening and spreading of stone gravel on 132KV switchyard at Garod Tilla, Kamalpur.
2175
-
-
ii) Control Building Extension:
-
-
-
Earth work in excavation over areas exceeding 30 cm. in depth 1.5 m in width as well as 10 sqm. on plan in/c. disposal of excavated earth lead upto 50 m and lift upto 1.5 m disposed earth to be levelled and neatly dressed. a) All kinds of soil
75
-
-
Earth work in excavation in foundation trenches or drains (not exceeding 1.52 m in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift up to 1.5m , including getting out the excavated soil and disposal of surplus excavated soil: i) by manual means.
245.5
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering , lead up to 50m and lift up to 1.5m.All kinds of soil.
550.75
-
-
Supplying and filling in plinth , under floor ,foundations etc. with sand (fine) from local quarry with all lifts including spreding in horizontal layers, watering , greading to required slope, reamming, consolidating and compacting each layrt by using pl
75.25
-
-
Providing and laying in position cement concrete of specfied grade excluding the cost of centering and shuttering. All work up to plinth level. i) 1:2:4 ( 1cement:2 fine sand:4 graged stone aggregate 20mm nominal size)
2.5
-
-
iii) 1:4:8(1cement:3 fine sand :6 graded stone aggregate 40mm nominal size)
35.7
-
-
Providing and laying damp proof course with cement concrete 1;2:4( 1 Cement :2 coarse sand :4 graded stone aggregate 12.5mm /20mm nominal size) i) DPC.40mm thick
5
-
-
Providing and laying in position specified grade of reinfroced cement concrete excluding the cost of centerting ,shuttering , finishing and reinforcement . All work upto plinth level: i) 1:1.5:3 ( 1 Cement 1.5 fine sand :3 graded stone aggragate 20mm nominal size.)
41.5
-
-
Reinforced cement concrete work in walls(any thickness) ,including attached pilasters, buttresses, plinth and skirting courses, fillets, columns , pillars, piers, abutments, posts and struts etc. up to five level excluding cost of centering , shuttering ,finishing and reinforcement. A) In plinth and skirting courses, fillets, columns, pillers posts and struts. i) 1:1.5:3 ( 1 Cement 1.5 fine sand :3 graded stone aggragate 20mm nominal size.)
17.5
-
-
Reinforced cement concrete work in beams, suspended floors roofs having slope up to 15* landing , balconies, shelves , chajja, lintels, bands, plain window sills, staircase and spiral stair cases up to floor five level excluding the cost of centering , shuttering , finishing and reinforcement . A) RCC work in suspended floors, roofs having slope up to 150 landings , balconies , shelves and chajjas. i) 1:1.5:3 ( 1 Cement 1.5 fine sand :3 graded stone aggragate 20mm nominal size.)
29.85
-
-
B) RCC work in beams , lintels, bands, plain window sills, staircases and spiral staircase excluding precast spiral staircase. i) 1:1.5:3 ( 1 Cement 1.5 fine sand :3 graded stone aggragate 20mm nominal size.)
32.25
-
-
Centering shuttering including strutting, propping etc. and removal of form work for :- i) Foundation , footings bases for columns etc. for mass concrete with timber plank
45.5
-
-
ii) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
215
-
-
iii) Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
145
-
-
iv) Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
185
-
-
iv) shade, Chajjas, corbels etc., including edges.
27.7
-
-
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to floor five level. i) Thermo -Mechanically treated bars/ Cold twisted deformed steel bars.
11575.4
-
-
First class brick work in foundation and plinth including cost of all materials as requied complete:- i) In cement mortor 1:6 (1 Cement :6 fine sand)
17.35
-
-
First class brick work in superstructure above plinth level & up to five level including cost of all materials as requied complete:- i) In cement mortor 1:6 (1 Cement :6 fine sand)
85.75
-
-
Half brick masonary work with first class bricks in foundation and plinth including cost of all materials as required complete:- i) In cement mortor 1:4 (1 Cement :4 fine sand)
10
-
-
Half brick masonary work with first class bricks in superstructure up to floor five level including cost of all materials as required complete:- i) In cement mortor 1:4 (1 Cement :4 fine sand)
35.5
-
-
Providing wood work in frames of doors, windows, clerestory windows and others frames, wrought framed and fixed in position: i) Karai wood.
0.25
-
-
Providing and fixing ISI marked flush door shutters conforming to IS;2202(part1) decorative type , core of block board construction with frame of 1st class hard wood and well matched teak 3ply veneering with vartical grains or cross bands and face veneers: i) 35 mm thick including ISI marked stainless steel butt hinges with necessary screws.
7.56
-
-
Providing and fixing MS grills of required pattern in frames of window etc. with MS flats, square or round bars etc. all complete. i) Fixed to openings /wooden frames with rawl plugs screws etc.
675.85
-
-
Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter botls, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement :3 fine sand: 6 graded stone aggregate20 mm nominal size)
9
-
-
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS;1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: i)300x16 mm
3
-
-
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS;1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: i)300x10mm
6
-
-
ii) 200x10mm
10
-
-
Providing and fixing aluminium handle ISI marked anodised (anodic coating not less than grade AC 10 as per IS;1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: i)125mm
8
-
-
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS;1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: i) Twin rubber stopper
3
-
-
Providing and fixing factory made UPVC door frame made of UPVC extruded , section having an overall diamension, as below (tolerance +/- 1mm) with wall thickness 2.0mm. Conners of the door frame to be jointed with galvanised brackets and stainless screws, i) Extruded section profile size 42x50mm.
9.9
-
-
Providing and fixing to existing door frames. 30mm thick factory made solid both side prelam panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles, top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5mm thick heat moulded prelam PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, button and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5mm thick both side Prelam PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture’s specification & drawing.
6.3
-
-
Providing and fixing IS:3564 marked alluminium die cast body tubular type universal hydrolic door closser with necessary accessories and screw etc. complete.
1
-
-
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality)
3
-
-
Prividing and fixing position callapsible steel shutters with vertical channels 20X10X2mm at 100mm centre to centre and braced with flat iron diagonals 20X5mm size with top & bottom rail of T-iron 40X40X6mm with 40mm dia steel pulleys and with reveted bol
9
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 275mm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters & with handles, hold fast including embedding in cement concrete of required grade required for fixing in position, all necessary fittings, including applying of approved steel primer etc. complete as required:- 80xl.25mm M.S. laths with 1.25 mm thick top cover.
6
-
-
Providing and fixing fan clamp type-1 of 16mm dia MS bar bent to shape with hooked ends in RCC slabs during laying in painting the exposed portion of loop , all as per standrad design complete.
6
-
-
Providing and laying cement concrete 1:2:4( 1 cement :2 fine sand :4 garded stone aggt.) flooring , finished with floating coat of neat cement including cement slurry , rounding of edgs and strips etc. complete. i) 40mm thick with 20mm stone aggt.
15
-
-
Providing and fixing precast chequered cement concrete tiles 22 mm thick , laid in footpath and court yard, on 20mm thick bed of cement motor 1:4 (1 cement :4 fine sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles includ: i) In dark shade using ordinary cement.
17.5
-
-
12mm Cement plaster in single layer including cost of materials required and even and smooth and curing complete. i) In cement mortor 1:6 (1 Cement :6 fine sand)
375.5
-
-
15mm Cement plaster in single layer including cost of materials required and even and smooth and curing complete. i) In cement mortor 1:6 (1 Cement :6 fine sand)
385.75
-
-
6mm Cement plaster in single layer including cost of materials required and even and smooth and curing complete. i) In cement mortor 1:4 (1 Cement :6 fine sand)
175
-
-
Neat cement punning.
35
-
-
Distempering with oil bound washable disterper of approved brand and manufacture and of required shade on new work (two or more coats), over and including a priming coat of cement primer to give an even shade complete.
600.5
-
-
Finishing wall with acrylic smooth exterior paint of required shade of approved branf and manufacture on new work (two or more coats applied @1.67kg/10sqm) over and including base coat water proofing cement paint applied @ 2.20Kg/10sqm complete.
750.75
-
-
Painting with synethetic enamel paint (two or more coats) of required colour of approved brand and manufacture on new work too give an even shade over an under coat of suitable shade with ordinary paint of approved btand and manufacture.
85
-
-
Varnishing with varnish of approved brand and manufacture i) Two or more coats of glue with copal varnish over an under coat of flatting varnish.
10.5
-
-
Providing and fixing water closet squatting pan ( Indian type W.C pan) with 100mm sand cast iron P or S trap, 10 liter low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with alll fittings and fixtur: i) White Vitreors china Orissa pattern W.C pan of size 585x480mm with integral foot rests.
2
-
-
Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and340x410x265mm size respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreader with brass union and G.I clamps comple i) Range of tow urinal basins with 5 litre white PVC automatic flushing cistern.
2
-
-
Providing and fixing wash basin with CI brackets ,15mm C.P. brass piller taps,32mm CP brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever required: i) White viterous China wash basin size 630x450mm with a single 15mm CP brtass pillar taps.
2
-
-
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete.
2
-
-
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall. i)15mm dia. nominal bore.
15
-
-
ii)25 mm dia. Nominal bore.
50
-
-
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. External work. ii)25 mm dia. Nominal bore.
25
-
-
Providing and fixing CP brass bib cock of approved quality conforming to IS:8931. i)15mm dia. nominal bore.
4
-
-
Providing and fixing CP brass stop cock(concealed)of standard design and of approved quality conforming to IS:8931. i)15mm dia. nominal bore.
4
-
-
Providing and fixing ball valve (brass) of approved quality complete. i)15mm dia. nominal bore.
2
-
-
ii)25 mm dia. Nominal bore.
2
-
-
Providing and fixing uplasticised PVC connection pipe with barss union: A) 450cm length. i)15mm dia. nominal bore.
8
-
-
Providing and placing on terrace (at all floor levels) polythylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank.
1000
-
-
Providing and fixing aluminium work for doors, windows, ventilators, stair railing including hand rail and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling to be paid for separately) :- For fixed portion of approved quality:- i) Anodised aluminium (anodised transparent or dyed to required shade accoringto IS:1868, minimum anodic coating of gradeAC15)
95.75
-
-
For shutters /sliding shutters of doors, windows & ventalators including providing and fixing hignes /pivots /rollers and making provision for fixing fittings wherever required including the cost of PVC /neoprene gasket required of approved quality (fitti i) Anodised aluminium (anodised transparent or dyed to required shade accoringto IS:1868, minimum anodic coating of gradeAC15)
125.5
-
-
Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition frames with PVC/neoprene gasket etc. complete as per architectural drawing and the direction of Engineer in Charge: i) With glass/float glass panes of 4.0mm thickness (wetght not less than 10.0Kg/Sqm)
45.75
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS:6315) for aluminium doors including cost of cutting floors as required , embedding in floors and cover plates etc. complete as oer direction of t i) with stainless steel cover plate.
1
-
-
Providing and fixing aluminium round shape handle of outer dia 100 with SS screws etc. of approved quality complete as per direction of Engineer in Cgarge:- i) Anodised aluminium of gradeAC15.
2
-
-
Providing and fixing 100mm brass locks (best make of approved quality) with 6 levers without pair of handles for aluminium doors including necessary cutting and making good etc. complete as per direction of Engineer in Charge.
2
-
-
Providing and fixing G.I. Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work): i) 15 mm nominal bore
4
-
-
i) 25 mm nominal bore
5
-
-
Providing and fixing G.I. union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation , refilling the earth or cutting of wall and makuing good the same complete whereever required: i) 15 mm nominal bore
5
-
-
i) 25 mm nominal bore
5
-
-
Providing and laying rectified glazed ceramic floor tiles 300x300 mm or more ( thickness to be specified by the manufacturer ) of 1st quality conforming to IS:15622of approved make in colours, shades such as white, ivory, grey, fume red, brown over 20m thick bed of cement mortor 1:4 ( !1 Cement :4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
25
-
-
Providing and laying polished vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours, shades over 20m thick bed of cement mortor 1:4 ( !1 Cement :4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. i) Size of tile -60x60 cm
185.5
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 ( thickness to be specified by the manufacturer ) of approved make in all except burgundy , bottel green , black of any size as approved by Engineer in Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortor 1:3 ( !1 Cement :3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
35
-
-
Providing and fixing PVC. Low level flushing cistern with manually controlled device ( handle lever) conforming to IS:7231, with all fittings and fixtures complete. i) 10 liters capacity - white.
2
-
-
Providing, fixing and laying rigid UPVC pipes conforming to IS :4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. Class - 3 ( working pressure 6.0 kg / cm2). 75 mm OD
25
-
-
110 mm OD
20
-
-
Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. 75 mm OD
5
-
-
110 mm OD
6
-
-
Providing, fixing and laying fabricated UPVC equal tee conforming to IS : 10124 ( Part 5 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. 75 x 75 mm dia
5
-
-
110 x 110 mm dia
5
-
-
Providing, fixing and laying fabricated UPVC straight reducer conforming to IS : 10124 ( Part 3 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. 75 x 63 mm dia
2
-
-
110 x 90 mm dia
2
-
-
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 100 mm dia. Pipe
25
-
-
Providing & fixing of false ceiling shall be provided with Armstrong Lay in (Hot dipped galvanished steel) metal ceiling system 600 x 600 x 5 mm with standard perforation of 2.5 mm dia (16% open space) and fleece with NRG of 70 & CAC 36 to be laid on Armatrong Grid system. Armstrong Orcal lay in metal ceiling system consisting of 600 x 600 mm lay in tiles of pre coated galvanized steel in 0.5 mm thickness in white colour with standerd perforation of 2.5 mm dia and open area of 16%. The back of tiles should have black acoustical fleece with NRG of 70 & CAC 36 to be laid on Armstrong Grid system with 15 mm wide T section flanges colour white having rotary stitching on main runner, 1200 mm & 600 mm cross Tees, fixed to the structrul soffit by Butterfly clip hangers, suspension wires & anchor fasteners as per manufacturers specification. Suspension wires to be provided at every 600 mm c/c with two numbers ties on each anchor fastener, perimeter trim of Trulok wall angle in white colour secured to wall at 450 mm maximum centers.
165.7
-
-
Providing and laying grading of roof for water proofing treatment complete as required as per direction of the Engineer-in-charge:- Cement concrete 1:2:4 ( 1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size ).
21.26
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements