Tripura State Electricity Corporation Limited Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Tripura State Electricity Corporation Limited - TSECL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date23 Oct 2024
Closing Date30 Oct 2024
Tender Amount₹ 11,74,023
Costs
EMD
₹ 23,480Document Cost
₹ 590Tender Fee
Refer Documents
Summary
Maintenance Of Existing Office Building Of The Dgm Ed Dharmanagar And Construction Of Attached Toilet Blockfor The Staff Of Ed Dharmanagar At Chandrapur Dharmanagar North Tripura
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_POWER_54031_1Tender No
NIT/DGM/ED-DMR/24-25/01Tender Authority
Tripura State Electricity Corporation Limited ViewPurchaser Address
-Website
http://https://www.tsecl.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level. (1 : 3 : 6 (1 cement : 3 fine sand : 6 graded stone aggregate of 40 mm nominal size))
0.76
-
-
Reinforcement for RCC works including straightening, cutting, bending, placing in position & binding all complete upto and above plinth level. Thermo -Mechanically Treated bars 16mm dia bar 151.6m ( 1.58 kg/m)
239.53
-
-
Reinforcement for RCC works including straightening, cutting, bending, placing in position & binding all complete upto and above plinth level. Thermo -Mechanically Treated bars 12mm dia bar 111.2m (0.89 kg/m)
98.96
-
-
Reinforcement for RCC works including straightening, cutting, bending, placing in position & binding all complete upto and above plinth level. Thermo -Mechanically Treated bars 10mm dia bar 1147.5m (0.62 kg/m)
711.45
-
-
Reinforcement for RCC works including straightening, cutting, bending, placing in position & binding all complete upto and above plinth level. Thermo -Mechanically Treated bars 8mm dia bar 451m (0.39 kg/m)
175.89
-
-
Reinforcement for RCC works including straightening, cutting, bending, placing in position & binding all complete upto and above plinth level. Thermo -Mild steel bars. 6mm dia plain 183m (0.22 kg/m)
40.26
-
-
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level . (1 : 2 : 4 ( 1 cement : 2 fine sand : 4 graded stone aggregate of 20 mm nominal size)).
1.34
-
-
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement -(1:2:4 ( 1 Cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size)).
1.13
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, cjajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement - (1:2:4 ( 1 Cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size)).
8.29
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering , lead upto 50 m and lift upto 1.5m. All kinds of soil
4.8
-
-
First class brick work in foundation and plinth including cost of all materials as required complete. In Cement mortar 1:6 ( 1 cement : 6 fine sand )
6.95
-
-
Providing and laying damp proof course with cement concrete 1 : 2 : 4 ( 1 cement : 2 fine sand : 4 graded stone aggregate of 12.5 mm nominal size) . D.P.C. 40mm thick
4.25
-
-
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete. In Cement mortar 1:4 ( 1 cement : 4 fine sand ) Deduct Doors & Windows
61.02
-
-
Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete. 40mm thick with 20 mm stone aggregate
16
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to openings
115.83
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Local Teak Wood
0.73
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass ( weight not less than 10ks/Sqm) panes including black enamelled ISI marked MS butt hinges with necessary screws. Local Teak Wood , 30 mm thick shutters.
12.72
-
-
Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position : Local Teak Wood
0.02
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part-I) decorative type, core of block board construction with frame of I class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked stainless steel butt hinges with necessary screws.
2.18
-
-
Providing and fixing factory made door frame ( single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60 mm width & 30 mm thickness and shall be fixed to wall as per instructions of Engineer-in-charge using 100 x 8 mm sheet metal CSK screws complete.
13.05
-
-
Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71 mm width & 28 mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI 'C' sections ( 39 x 19 x 0.6 mm thick) stiffener frame insert & telescopic polymeric 'L' corners. The panel shall be filled with 3 mm thick high pressure compact laminate as per manufacturer's specifications and direction of Engineer-in-charge, cover moulding shall be provided for covering, fixing screws and elegant look.
4.05
-
-
Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.
2
-
-
Providing 40 x 5 mm flat iron hold fast 40cm long including fixing to frame with 10 mm diameter bolts, nuts & wooden plugs and embedding in cement concrete block 30x10x15cm. 1:3:6 mix (1 cement: 3 fine sand: 6 graded stone aggregate 20 mm nominal size) .
16
-
-
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 300 x 16 mm.
4
-
-
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete . 250 x 10 mm
24
-
-
Providing and fixing aluminium work for doors, sliding doors, windows, ventilators, stair railing with hand rail and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS : 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws all complete as per architectural drawings and the direction of Engineer-in-charge and as per clauses of chapter-24 of CPWD specification. (Glazing and panelling to be paid for separately). For fixed portion of approved quality: Anodised aluminium (anodised transparent or dyed to required shade according to IS : 1868 , minimum anodic coating of grade AC 15 )
2.1
-
-
Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition frames with PVC / neoprene gasket etc. complete as per architectural drawings and the direction of Engineer-in-charge . With glass panes of 4.0 mm thickness (weight not less than 10.00kg/sqm)
0.81
-
-
Providing precast cement concrete jali 1 : 2 : 4 ( 1 cement : 2 fine sand : 4 graded stone aggregate 6 mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centring and shuttering, roughening, cleaning, fixing in position and finishing with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) etc. complete as per design excluding plastering of the jambs, sills and soffits . 25 mm thick
0.54
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
20
-
-
12 mm cement plaster of mix: Cement mortar 1:4 ( 1 cement : 4 fine sand )
202.59
-
-
12 mm cement plaster of mix: Cement mortar 1:6 ( 1 cement : 6 fine sand )
10.2
-
-
6 mm cement plaster of mix : Cement mortar 1:4 ( 1 cement : 4 fine sand )
27.06
-
-
Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862 : 2000 with suitable screws for fibre cement board in ceiling etc. complete as per direction of Engineer-in-charge (frame work to be paid separately) : 6 mm thick cement board
60.48
-
-
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete as per direction of Engineer- in-charge. 0.63 mm thick with zinc coating not less than 275 gm/sqm
74.29
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm and braced with flat iron diagonals 20 x 5 mm with top and bottom rail of T - iron 40 x 40 x 6 mm with 40 mm dia steel pulleys complete with riveted bolts, nuts, locking arrangements, stoppers, handles etc. including applying a coat of priming coat of approved steel primer all complete .
3.6
-
-
Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brick bats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design .
1
-
-
Supplying & fitting, fixing water pump complete with 1H.P. motor (Crompton make) i/c. fitting, fixing of necessary check valve, full way valve etc. in suction line and providing the earthing arrangement as per direction of the Engineer-in-charge.
1
-
-
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams / litre of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer.
418.61
-
-
Finishing walls with premium acrylic smooth exterior paint with Silicon additives of required shade of approved brand and manufacture. New work ( two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
340.28
-
-
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10sqm over an under coat of primer applied @ 0.75 ltr/ 10 sqm of approved brand and manufacture.
218.15
-
-
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10sqm over an under coat of primer applied @ 0.80 ltr / 10 sqm of approved brand and manufacture.
12.06
-
-
Providing and fixing CPVC pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling & testing of joints complete as per direction of Engineer in Charge (External work). 25 mm dia nominal bore
52
-
-
Providing and fixing CPVC pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge ( Internal work - Exposed on wall). 15 mm dia nominal bore
30
-
-
Providing and fixing G.I union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete as per CPWD specification and direction of the Engineer -in - charge. 15 mm dia.
4
-
-
Providing and fixing G.I union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete as per CPWD specification and direction of the Engineer -in - charge. 25 mm dia.
8
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931: 15 mm dia
5
-
-
Providing and fixing C.P. brass stop cock of standard design and of approved make conforming to IS:8931. 15 mm dia
4
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, wiyh all fittings and fixtures complete including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
2
-
-
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.
1
-
-
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550 x 400 mm.
1
-
-
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 450 x 300 mm
2
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white PVC automatic flushing cistern.
1
-
-
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality)complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete .
2
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality and colour. 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170 gms.
2
-
-
Providing and fixing UPVC connection pipe of approved quality with brass unions : 15 mm dia nominal bore 45 cm long.
4
-
-
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc. complete . 125 mm
15
-
-
Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 6 kg / sq.cm.) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion : Single socketed pipe - 110 mm OD
50.3
-
-
Making plinth protection 50mm. thick of cement concrete 1:3:6 (1cement : 3 river sand : 6 jhama brick aggregate 20mm. nominal size) over 75mm. bed of dry brick ballast 40mm. nominal size well rammed and consolidated and grouted with river sand including finishing the top smooth.
7.65
-
-
Providing and fixing Exhaust fan all complete as per direction of the Engineer - in - charge.
3
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer - in - charge. 450 mm x300 mm in all shades and design
28.8
-
-
Providing and laying 1st quality ceramic floor tiles in different sizes conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in colours such as white, ivory, grey, fume red, brown laid over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. all complete as per direction of the Engineer - in - charge. Anti skid Tiles 300 mm x 300 mm in all shades and designs
8
-
-
Providing and laying in position cement concrete of specified grade including the cost of Form work . 1 : 3 : 6 ( 1 cement : 3 fine sand : 6 graded stone aggregate of 20 mm nominal size).
0.15
-
-
Neat cement punning .
27.08
-
-
Centering shuttering including strutting, propping etc. and removal of form work for : (a) Foundations, footings, bases for columns etc. for mass concrete with timber plank.
2.4
-
-
Centering shuttering including strutting, propping etc. and removal of form work for : b)Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank.
36.25
-
-
Centering shuttering including strutting, propping etc. and removal of form work for : c)Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank.
18.6
-
-
Centering shuttering including strutting, propping etc. and removal of form work for : d)Suspended floors, roofs, landings,balconies and access platform with timber plank.
36.34
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements