Rural Development Department Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Rural Development Department - RDD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date19 Dec 2023
Closing Date10 Jan 2024
Tender Amount₹ 2,49,05,625
Costs
EMD
₹ 4,98,113Document Cost
₹ 8,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_CERDD_45054_1Bid Award Id
ViewTender No
eDT58/CE/RDD/KCP-DIV/DNITTender Authority
Rural Development Department ViewPurchaser Address
-Website
http://https://rural.tripura.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
2.13 Earth work in excavation by mechanical means (Hydraulic
excavator) / manual means in foundation trenches or
drains (not exceeding 1.5 m in width or 10 sqm on plan)
including dressing of sides and ramming of bottoms, lift
upto 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soil as directed, within a lead
of 50 m.
-All kinds of soil
612.48
103815
169.5
... More
2.16 Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not
exceeding 20cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift
upto 1.5 m.
-All kinds of soil
544.17
65464
120.3
... More
2.19 Supplying and filling in plinth, under floor, foundations etc.
with sand (fine) from local quarry with all lifts including
spreading in horizontal layers, watering, grading to
required slope, ramming, consolidating and compacting
each layer by using plate compactor or by any suitable
method complete.
183.43
162794
887.5
... More
2.20 Supplying chemical emulsion in sealed containers including delivery as specified.
2.20.1 Chlorpyriphos/Lindane emulsifiable concentrate of 20%
124.75
26459
212.1
... More
2.21.3 Treatment of soil under plinth filling using chemical
emulsion @ one litre per hole, 300 mm apart including
drilling 12 mm diameter holes and plugging with sand
filling:
2.21.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
457.52
43419
94.9
... More
2.21.1 Along external wall where the apron is not provided using
chemical emulsion @ 7.5 litres/sqm of the vertical surface
of the substructure to a depth of 300 mm including
excavation channel along the wall & rodding etc. complete:
2.21.1.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
92.2
1300
14.1
... More
4.1 Providing and laying in position cement concrete of
specified grade excluding the cost of centring and
shuttering -
-All work upto plinth level:
4.1.15 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt
brick aggregate 40 mm nominal size)
107.86
846140
7844.8
... More
4.1.14 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt
brick aggregate 40 mm nominal size)
7.62
61536
8075.6
... More
4.4 Centering shuttering including struttings, propping
etc. and removal of form work for:
4.4.1 Foundations, footings, bases for columns.
7.58
1809
238.6
... More
4.12 Extra for providing and mixing water proofing
material in cement concrete work in doses by weight
of cement as per manufacturer's specification
96.11
5911
61.5
... More
4.17 Making plinth protection 50mm thick of cement
concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well
burnt brick aggregate 20 mm nominal size) over
75mm bed of dry brick ballast 40mm nominal size
well rammed and consolidated and grouted with fine
sand including finishing the top smooth.
34.24
27752
810.5
... More
5.1 Providing and laying in position specified grade of
reinforced cement concrete excluding the cost of
centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
5.1.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
aggregate 20 mm nominal size)
172.72
1895533
10974.6
... More
5.2 Reinforced cement concrete work in walls (any
thickness), including attached pilasters, buttresses,
plinth and skirting courses, fillets, columns, pillars,
piers, abutments, posts and struts etc. upto floor five
level excluding cost of centring, shuttering, finishing
and reinforcement-
5.2.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
aggregate 20 mm nominal size)
46.19
544668
11791.9
... More
5.3 Reinforced cement concrete work in beams, suspended
floors, roofs having slope upto 15° landings, balconies,
shelves, chajjas, lintels, bands, plain window sills,
staircases and spiral stair cases upto floor five level
excluding the cost of centring, shuttering, finishing
and reinforcement-
5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
aggregate 20 mm nominal size)
184.61
2234649
12104.7
... More
5.7 Reinforced cement concrete work in vertical and
horizontal fins individually or forming box louvers,
facias and eaves boards above plinth level up to floor
five level, excluding the cost of centering, shuttering,
finishing and reinforcement with
5.7.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
aggregate 20 mm nominal size)
2.21
26320
11909.3
... More
5.8 Centering shuttering including struttings, propping etc.
and removal of form work for:
5.8.1.1 Foundations, footings, bases for columns etc. for mass concrete with timber plank
98.08
26374
268.9
... More
5.8.6.1 Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
550.68
265978
483
... More
5.8.5.1 Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
966.31
372223
385.2
... More
5.8.4.2 Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
953.2
513775
539
... More
5.8.12.1 Edges of slabs and breaks in floors and walls under 20 cm. wide
488.29
48585
99.5
... More
5.8.13 Weather shade, Chajjas, corbels etc., including edges.
35.21
14707
417.7
... More
5.8.3 Walls (any thickness) including attached pilasters,
buttresses, plinth and string courses etc. using shuttering
ply
38.4
14208
370
... More
5.8.7.1 Stairs (excluding landings) except spiral-staircases with wooden plank
69.26
33092
477.8
... More
5.8.11 Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards.
50.2
17776
354.1
... More
5.19 Reinforcement for R.C.C. work including straightening,
cutting, bending, placing in position and binding all
complete upto plinth level.
5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D or more
63758.3
4985899
78.2
... More
5.18 Providing precast cement concrete Jali 1:2:4 (1 cement:
2 coarse sand : 4 graded stone aggregate 6mm nominal
size) reinforced with 1.6 mm dia mild steel wire
including centring and shuttering, roughening
cleaning, fixing and finishing in cement mortar
1:3(1cement : 3 fine sand) etc. complete, excluding the
plastering of jambs, sills and soffits
5.18.2 40 mm thick
2.7
2743
1016
... More
6.1 First class brick work in foundation and plinth
including cost of all materials as required complete:-
6.1.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ).
52.18
450006
8624.1
... More
6.3 First class brick work in superstructure above plinth
level & upto floor-five level including cost of all
materials as required complete:-
6.3.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ).
128.77
1269634
9859.7
... More
6.6 Extra for brick masonry work in triangular, square and
rectangular pillars including cost of all materials as
required complete.
6.49
2720
419.1
... More
6.10 Half brick masonry work with first class bricks in
foundation and plinth including cost of all materials as
required complete:-
6.10.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ).
48.26
57328
1187.9
... More
6.12 Half brick masonry work with first class bricks in
superstructure upto floor five level including cost of
all materials as required complete:-
6.12.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ).
808.29
1101780
1363.1
... More
8.1 Providing wood work in frames of doors, windows,
clerestory windows and other frames, wrought
framed and fixed in position :
8.1.3 Local Teak Wood
0.65
56588
87719.7
... More
8.2 Extra for additional labour for circular works, such as
in frames of fan light:
8.2.3 Local Teak Wood
0.27
2402
8771.94
... More
8.17 Providing and fixing 25 mm thick shutters for
cupboards etc. including ISl marked black enamelled
M.S. butt hinges with necessary screws :
8.17.1 Panelled or panelled and glazed shutters
8.17.1.1 Gamair Wood
37.8
88985
2354.1
... More
8.19 Providing and fixing ISI marked flush door shutters
conforming to IS: 2202 (Part I) non-decorative type,
core of block board construction with frame of 1st
class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and
face veeners on both faces of shutters.
8.19.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
13.23
23637
1786.6
... More
8.5 Providing and fixing panelled / or panelled and
glazed shutters for doors, windows and clerestory
windows including ISI marked bright finished /
black enamelled M.S butt hinges with necessary
screws excluding panelling and or glazing, which
will be paid for separately but including the wooden
beading of 20 × 12 mm for fixing panelling and or
glazing as per direction of Engineer-In-Charge.
8.5.1 Local Teak wood
8.5.1.1 35 mm thick shutters
3.78
7800
2063.5
... More
8.120 Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with
homogenous fine cellular structure having smooth
outer integral skin having 60mm width & 30mm
thickness and shall be fixed to wall as per
instructions of Engineer-In-Charge using 100x8 sheet
metal CSK screws.
94.05
44091
468.8
... More
8.121 Providing and fixing 28 mm thick door shutter made
of solid PVC foam profile with homogenous fine
cellular structure having smooth outer integral skin
having 71mm width & 28mm thick as vertical &
horizontal styles. Joints are made using solvent
adhesive and GI ‘C sections (39mm x 19mm x 0.6mm
thick) or M S pipe (40mm x 20mm ) stiffener frame
insert & telescopic polymeric ‘L’ corners .The panel
shall be filled with 3mm thick high - pressure
compact laminate as per manufacturer’s
specifications and directions of the Engineer-incharge,
cover moulding shall be provided for
covering fixing screws and elegant look.( for W.C.
bathroom door shutter).
29.93
92615
3094.4
... More
8.51 Providing 40 × 5 mm flat iron hold fast 40 cm long
including fixing to frame with 10 mm diameter bolts,
nuts and wooden plugs and embedding in cement
concrete block 30 × 10 × 15 cm 1:3:6 mix
96
15590
162.4
... More
8.94 Providing and fixing aluminium sliding door bolts ISI
marked anodised (anodic coating not less than grade
AC 10 as per IS : 1868) transparent or dyed to
required colour or shade with nuts and screws etc.
complete :
8.94.1 300x16 mm
26
6757
259.9
... More
8.94.2 250x16 mm
19
4288
225.7
... More
8.95 Providing and fixing aluminium tower bolts ISI
marked anodised (anodic coating not less than grade
AC 10 as per IS : 1868 ) transparent or dyed to
required colour or shade with necessary screws etc.
complete :
8.95.1 300x10 mm
52
6666
128.2
... More
8.95.4 150x10 mm
38
3257
85.7
... More
8.98 Providing and fixing aluminium handles ISI marked
anodised (anodic coating not less than grade AC 10
as per IS : 1868) transparent or dyed to required
colour or shade with necessary screws etc. complete :
8.98.1 125 mm
90
5823
64.7
... More
8.99 Providing and fixing aluminium hanging floor door
stopper ISI marked anodised (anodic coating not less
than grade AC 10 as per IS : 1868) transparent or
dyed to required colour and shade with necessary
screws etc. complete.
8.99.1 Single rubber stopper
40.99
1525
37.2
... More
8.41 Providing and fixing 18 mm thick, 150 mm wide
pelmet of coir veneer board ISI marked IS : 14842 -
2000, including top cover of 6 mm coir veneer board,
nickel plated M.S. Pipe 20 mm dia (heavy type)
curtain rod with nickel plated brackets including
fixing with 25 × 3 mm M.S. flat 10 cm long and rawl
plugs 50 mm long (designation 10 no.) etc. all
complete.
86.7
47529
548.2
... More
8.45 Providing and fixing nickel plated M.S. pipe curtain
rods with nickel plated brackets:
8.45.1 20 mm dia (heavy type)
69
6983
101.2
... More
8.46 Providing and fixing M.S. grills of required pattern in
frames of windows etc. with M.S. flats, square or
round bars etc. all complete.
8.46.2 Fixed to openings /wooden frames with rawl plugs
screws etc.
1664.1
210342
126.4
... More
16.1 Providing and fixing aluminium work for doors,
windows, ventilators and partitions with extruded built
up standard tubular sections/ appropriate Z sections
and other sections of approved make conforming to
IS: 733 and IS : 1285, fixing with dash fasteners of
required dia and size, including necessary filling up of
gaps at junctions, i.e. at top, bottom and sides with
required EPDM rubber/neoprene gasket etc. Aluminium
sections shall be smooth, rust free, straight, mitred and
jointed mechanically wherever required including cleat
angle, aluminium snap beading for glazing / paneling,
C.P. brass / stainless steel screws, all complete as per
architectural drawing and the direction of
Engineerincharge.
(Glazing and paneling and dash
fasteners to be paid for separately) :-
16.1.2 For shutters of doors, windows & ventilators including
providing and fixing hinges / pivots and making
provision for fixing fittings wherever required including
the cost of EPDM rubber / neoprene gasket required (
Fittings shall be paid for separately ):-
16.1.2.1 Anodised aluminium (anodised transparent or dyed to
required shade according to IS: 1868, Minimum anodic
coating of grade AC 15).
273.38
128926
471.6
... More
16.1 Providing and fixing aluminium work for doors,
windows, ventilators and partitions with extruded built
up standard tubular sections/ appropriate Z sections
and other sections of approved make conforming to
IS: 733 and IS : 1285, fixing with dash fasteners of
required dia and size, including necessary filling up of
gaps at junctions, i.e. at top, bottom and sides with
required EPDM rubber/neoprene gasket etc. Aluminium
sections shall be smooth, rust free, straight, mitred and
jointed mechanically wherever required including cleat
angle, aluminium snap beading for glazing / paneling,
C.P. brass / stainless steel screws, all complete as per
architectural drawing and the direction of
Engineerincharge.
(Glazing and paneling and dash
fasteners to be paid for separately) :-
16.1.1 For fixed portion of approved quality:-
16.1.1.1 Anodised aluminium (anodised transparent or dyed to
required shade according to IS: 1868, Minimum anodic
coating of grade AC 15).
19.44
7780
400.2
... More
16.3 Providing and fixing glazing of approved quality in
aluminium doors, windows, ventilator, shutters and
partition etc. with EPDM rubber / neoprene gasket etc.
complete as per architectural drawing and the direction
of Engineer-in-charge (Cost of snap beading shall be paid
in basic item) :-
16.3.1 With float glass panes of 4.0 mm thickness ( weight not
less than 10.0 kg / sqm )
65.07
68857
1058.2
... More
16.10 Providing and fixing stainless steel ( SS 304 grade )
adjustable friction window stay of approved quality with
necessary stainless steel screws etc. to the side hung
windows etc. complete as per direction of Engineer-incharge:-
16.10.1 205 x 19 mm
123
33948
276
... More
9.3 Providing and fixing in position collapsible steel shutters
with vertical channels 20x10x2mm at 100 mm centre to
centre and braced with flat iron diagonals 20x5mm size
with top and bottom rail of T-iron 40x40x6mm with
40mm dia. steel pulleys & with riveted bolts, nuts,
locking arrangement, stoppers, handles, hold fast
/anchor bolt including embedding in cement concrete of
required grade for fixing in position, all necessary
fittings, including applying a priming coat of approved
steel primer etc. complete as required.
13.18
76918
5836
... More
9.10 Providing and fixing T-iron frames for doors, windows
and ventilators of mild steel Tee-sections, joints mitred
and welded, including fixing of necessary butt hinges
and screws and applying a priming coat of approved
steel primer.
9.10.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement
concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3
coarse sand : 6 graded stone aggregate 20 mm nominal
size)
540
53784
99.6
... More
9.13 Providing and fixing fan clamp type-I of 16 mm dia M.S.
bar bent to shape with hooked ends in R.C.C. slabs
during laying including painting the exposed portion of
loop, all as per standard design complete.
80
11696
146.2
... More
9.12 Steel work in built up tubular (round, square or
rectangular hollow tubes etc.) trusses etc., including
cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer, including welding
and bolted with special shaped washers etc. complete.
9.12.1 Hot finished welded type tubes
351.48
43197
122.9
... More
9.22 Providing and fixing stainless steel (Grade 304) railing
made of Hollow tubes, channels, plates etc., including
welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete,
including fixing the railing with necessary accessories &
stainless steel dash fasteners , stainless steel bolts etc., of
required size, on the top of the floor or the side of waist
slab with suitable arrangement as per approval of
Engineer-in-charge, (for payment purpose only weight of
stainless steel members shall be considered excluding
fixing accessories such as nuts, bolts, fasteners etc.).
105
55934
532.7
... More
11.42 Providing and fixing on wall face unplasticised
Rigid PVC rain water pipes (working pressure 4
kg/cm2) conforming to IS : 13592 Type A including
jointing with seal ring conforming to IS : 5382
leaving 10 mm gap for thermal expansion:
11.42.2 Single socketed pipe - 110 mm OD
188.4
50585
268.5
... More
11.15 Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of
corrugation as approved by Engineer-in-charge) in
550mpa steel grade, made out of Cold Rolled Steel
coated with Zinc-Aluminium alloy coating of 43.5% Zn,
55% Al and 1.5% Silicon confirming to ASTM
A792/A792M and AS1397, Alloy coating AZ150/AZ70,
colour coated with high quality Polyester coating, top
coated of modified polyester of 20 micron, back side
coat of 5 micron, having epoxy primer coat of 5 micron
on both side. Sheet should have protective guard film
of 25 microns minimum to avoid scratches while
transportation and should be supplied in single
length upto 12 metre or as desired by Engineer-incharge.
The sheet shall be fixed using self drilling
/self tapping screws of size (5.5x 55mm) with EPDM
washers filled with white lead complete upto any
pitch in horizontal/ vertical or curved surfaces
excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required.
11.15.3 0.50mm thickness
77.76
66874
860
... More
17.14 Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with :
17.14.1 Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
16.02
169077
10554.1
... More
10.9 Providing and laying cement concrete 1:2:4 (1 cement : 2
fine sand : 4 graded well burnt brick aggregate) flooring
finished with a floating coat of neat cement including
cement slurry, rounding of edges and strips etc.
complete.
10.9.2 40 mm thick with 20 mm well burnt brick aggregate
37.99
19375
510
... More
10.9.1 25 mm thick with 12.5 mm well burnt brick aggregate
28.25
11167
395.3
... More
10.55 Providing and fixing precast chequered cement concrete
tiles 18 mm thick, laid in footpath & courtyard, on 20
mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine
sand ) jointed with neat cement slurry including rubbing
and cleaning complete as per direction of the Engineer-in-
Charge.
34.36
19709
573.6
... More
10.38 Providing and fixing 1st quality ceramic glazed wall tiles
(minimum 200 x 300) conforming to IS : 15622 - 2017
(thickness to be specified by the manufacturer) of
approved make in all colours, shades of any size as
approved by Engineer-in-charge in skirting, risers of
steps and dados, laid over 12 mm thick bed of cement
mortar 1 : 3 (1 cement : 3 fine sand) jointed with
ordinary cement slurry including pointing with white
cement mixed with pigment of matching shade complete.
880.04
696992
792
... More
10.39 Providing and laying ceramic floor tiles in different sizes
(thickness to be specified by the manufacturer) of 1st
quality conforming to IS : 15622 - 2017 of approved
make in colours such as White, Ivory, Grey, Fume Red
Brown, laid over 20 mm thick cement mortar 1:4 (1
cement : 4 fine sand), Jointing with grey cement slurry @
3.3 kg/sqm including pointing the joints with white
cement and matching pigment etc. complete.
10.39.1 Anti-Skid Tiles
10.39.1.1 Ceramic Tiles 1st quality 300 x 300mm in all shades and designs
89.3
75119
841.2
... More
10.28 Providing and fixing Marble stone in floors over 20 mm
thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand
) jointed with ordinary cement slurry including pointing
with white cement mixed with of matching shade,
including rubbing and polishing complete.
10.28.1 18 mm thick Marble stone
10.28.1.2 Raj Nagar plain marble
341.64
649150
1900.1
... More
10.29 Extra for prefinished nosing to treads of steps of marble stone.
23.93
8459
353.5
... More
10.42 Providing and laying vitrified floor tiles in different sizes
(thickness to be specified by the manufacturer) with
water absorption less than 0.08% and conforming to IS:
15622 - 2017, of approved make, in all colours and
shades, laid over 20mm thick cement mortar 1:4 (1
cement : 4 fine sand), jointing with grey cement slurry @
3.3 kg/ sqm including grouting the joints with white
cement and matching pigments etc., complete.
10.42.2 Double charged Stainfree vitrified tiles
10.42.2.1 Size of tile 60x60 cm
567.98
635115
1118.2
... More
12.4 6 mm cement plaster of mix :
12.4.1 Cement mortar 1:3 (1 cement : 3 fine sand)
1147.6
165828
144.5
... More
12.1 12 mm cement plaster of mix
12.1.4 Cement mortar 1:6 (1 cement : 6 fine sand)
822.94
131341
159.6
... More
12.1 12 mm cement plaster of mix
12.1.2 Cement mortar 1:4 (1 cement : 4 fine sand)
1055.05
184423
174.8
... More
12.2 15 mm cement plaster on the rough side of single or
half brick wall of mix:
12.2.4 Cement mortar 1:6 (1 cement : 6 fine sand)
569.9
105602
185.3
... More
12.2 15 mm cement plaster on the rough side of single or
half brick wall of mix:
12.2.2 Cement mortar 1:4 (1 cement : 4 fine sand)
1055.05
214597
203.4
... More
12.5 Neat cement punning.
412.24
18592
45.1
... More
12.16 12 mm thick plain cement mortar bands in cement
mortar 1:4 (1 cement : 4 fine sand):
12.16.3 Raised Band
300.45
1322
4.4
... More
12.13 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
2753.16
347449
126.2
... More
12.24 Distempering with oil bound washable distemper of
approved brand and manufacture to give an even shade
[Payment shall be made after submission of Test
Certificate issued by the Manufacturer] :
12.24.1 New work ( two or more coats) over and including water thinnable priming coat with cement primer.
2753.16
263477
95.7
... More
12.31 Finishing walls with premium acrylic smooth exterior
paint with Silicon additives of required shade of
approved brand and manufacture [Payment shall be
made after submission of Test Certificate issued by the
Manufacturer] :
12.31.1 New work ( two or more coats applied @ 1.43 litre/10 sqm
over and including priming coat of exterior primer
applied @ 2.20 kg/10 sqm)
716.76
85509
119.3
... More
12.33 Applying priming coat [Payment shall be made after
submission of Test Certificate issued by the
Manufacturer] :
12.33.1 With ready mixed Pink or Grey primer of approved brand
and manufacture on wood work ( hard & soft wood ).
59.84
2268
37.9
... More
12.47 Painting with synthetic enamel paint of approved brand
and manufacture to give an even shade [Payment shall
be made after submission of Test Certificate issued by
the Manufacturer]:
12.47.1 Two or more coats on new work
165.48
13702
82.8
... More
19.10 Providing and fixing G.I. pipes of medim class as per
IS : 1239 with latest amendment complete with G.I.
fittings and clamps, including cutting and making
good the walls etc. complete as per CPWD
specification and direction of the Engineer - in -
charge.
Internal work - Exposed on wall.
19.10.1 15 mm dia. nominal bore
39.6
9060
228.8
... More
19.10.2 20 mm dia. nominal bore
72.96
20546
281.6
... More
19.10.3 25 mm dia. nominal bore
227.3
84010
369.6
... More
19.10.4 32 mm dia. nominal bore
80
36448
455.6
... More
19.46 Providing and fixing G.I. Union in G.I. pipe including
cutting and threading the pipe and making long
screws etc. complete as per CPWD specification and
direction of the Engineer - in - charge.(New work)
19.46.2 20 mm nominal bore
10
1826
182.6
... More
19.46.3 25 mm nominal bore
10
2377
237.7
... More
19.46.4 32 mm nominal bore
5
1465
292.9
... More
19.46.5 40 mm nominal bore
5
1809
361.8
... More
19.12 Providing and fixing G.I. pipes of medim class as per
IS : 1239 with latest amendment complete with G.I.
fittings including trenching and refilling etc. complete
as per CPWD specification and direction of the
Engineer - in - charge.
External work
19.12.5 40 mm dia. nominal bore
64.95
30708
472.8
... More
19.12.6 50 mm dia. nominal bore
50
27855
557.1
... More
19.17 Providing and fixing gun metal gate valve with C.I.
wheel of approved quality (screwed end):
19.17.2 32 mm nominal bore
3
1796
598.5
... More
19.19 Providing and fixing gun metal non-return valve of
approved quality (screwed end):
19.19.2 32 mm nominal bore
19.19.2.2 Vertical
3
2234
744.6
... More
19.18 Providing and fixing ball valve (brass) of approved
quality High or low pressure, with plastic floats
complete :
19.18.3 25 mm nominal bore
3
1754
584.6
... More
19.21 Providing and fixing uplasticised PVC connection
pipe with brass unions :
19.21.2 45 cm length
19.21.2.1 15 mm nominal bore
21
2018
96.1
... More
19.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and
weighing not less than 690 gm.
19.51.1 15mm nominal bore.
4
2249
562.3
... More
19.58 Providing and fixing PTMT grating of approved
quality and colour.
19.58.1 Circular type.
19.58.1.1 100 mm nominal dia.
50
1670
33.4
... More
19.76 Cutting holes upto 30x30 cm in walls including
making good the same :
19.76.1 With 1st class bricks.
30
9138
304.6
... More
19.77 Cutting holes upto 15x15 cm in R.C.C. floors and
roofs for passing drain pipe etc. and repairing the
hole after insertion of drain pipe etc. with cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) including
finishing complete so as to make it leak proof.
30
7377
245.9
... More
19.65 Providing and fixing PTMT soap Dish Holder having
length of 138mm, breadth 102mm, height of 75mm
with concealed fitting arrangements weighing not
less than 106 gm.
14
1715
122.5
... More
19.48 Providing and placing on terrace (at all floor levels)
polyethylene water storage tank ISI : 12701 marked
with cover and suitable locking arrangement and
making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for
tank.
10000
100000
10
... More
18.1 Providing and fixing water closet squatting pan (Indian
type W.C. pan ) with 100mm sand cast Iron P or S trap,
10 litre low level white P.V.C. flushing cistern with
manually controlled device (handle lever) conforming
to IS : 7231, with all fittings and fixtures complete
including cutting and making good the walls and floors
wherever required :
18.1.1 White Vitreous china Orrisa pattern W.C. pan of size
580x440 mm with integral type foot rests.
8
37079
4634.9
... More
18.2 Providing and fixing white vitreous china pedestal
type water closet (European type W.C. pan) with seat
and lid, 10 litre low level white P.V.C. flushing
cistern with manually controlled device (handle lever),
conforming to IS : 7231, with all fittings and fixtures
complete including cutting and making good the walls
and floors wherever required :
18.2.1 W.C. pan with ISI marked white solid plastic seat and lid
3
13195
4398.3
... More
18.5 Providing and Fixing white vitreous china flat back
half stall urinal of size 580x380x350mm with white
PVC automatic flushing cistern, with fittings,
standard size C.P. brass flush pipe, spreaders with
unions and clamps (all in C.P. brass) with waste fitting
as per IS : 2556, C.I. trap with outlet grating and other
couplings in C.P. brass including painting of fittings
and cutting and making good the walls and floors
wherever required :
18.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.
24
169195
7049.8
... More
18.6 Providing and Fixing one piece construction white
vitreous china squatting plate with an integral
longitudinal flushing pipe, white P.V.C. Automatic
flushing cistern, with fittings, standard size G.I.
flush pipe for back and front flush with standard
spreader pipes with fittings, G.I clamps and C.P. brass
coupling complete including painting of fittings and
cutting and making good the walls and floors etc.
wherever required :
18.6.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern.
1
5059
5059.4
... More
18.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of
standard pattern, including painting of fittings and
brackets, cutting and making good the walls
wherever require :
18.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps.
19
46558
2450.4
... More
18.10 Providing and fixing Stainless Steel AISI 304 (18/8)
kitchen sink as per IS 13983 with C.I. brackets and
stainless steel plug 40 mm including painting of fittings
and brackets, cutting and making good the walls
wherever required:
18.10.1 Kitchen sink with drain board
18.10.1.1 510x1040 mm bowl depth 250mm.
2
10147
5073.3
... More
18.31 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
14
11677
834.1
... More
18.33 Providing and fixing 600x120x5mm glass shelf with
edges round of supported on anodised aluminium angle
frame with C.P. brass brackets and guard rail complete
fixed with 40 mm long screws, rawl plugs etc., complete.
14
6790
485
... More
18.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
18.28.2 Flexible pipe
18.28.2.1 32 mm dia
21
1972
93.9
... More
18.83 Providing and fixing on wall face unplasticised Rigid
PVC rain water, soil, waste & vent pipes (working
pressure 6 kg / cm2) conforming to IS : 13592 Type A
including jointing with seal ring conforming to IS :
5382 leaving 10 mm gap for thermal expansion:
18.83.1 Single socketed pipe - 110 mm OD
289.85
93100
321.2
... More
18.84 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid
PVC rain water, soil, waste & vent pipes pipes
conforming to IS : 13592 Type A including jointing
with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion:
18.84.1 Coupler
18.84.1.2 110 mm
70
8652
123.6
... More
18.84.3 Single equal tee without door
18.84.3.2 110x110x110mm
12
2693
224.4
... More
18.84.4 Single equal tee with door
18.84.4.2 110x110x110mm
15
3468
231.2
... More
18.84.5 Bend 87.5°
18.84.5.2 110mm
90
12681
140.9
... More
18.85 Providing and fixing unplasticised -PVC pipe clips of
approved design to unplasticised - PVC rain water,
soil, waste & vent pipes by means of 50x50x50mm
hard wood plugs, screwed with M.S. screws of
required length including cutting brick work and
fixing with cement mortar 1 : 4 (1cement : 4 fine sand)
making good the wall etc. complete.
18.85.2 110mm
240
45720
190.5
... More
18.86 Providing and fixing to the inlet mouth of rain water,
soil, waste & vent pipes pipe PTMT grating with
thickness of 8mm and weighing not less than 100gm.
18.86.2 100mm
20
1944
97.2
... More
20.8 Constructing brick masonry chamber for
underground C.I. inspection chamber and
bends with 1st class bricks in cement mortar
1:4 (1 cement : 4 fine sand) C.I. cover with
frame (light duty) 455x610 mm internal
dimensions, total weight of cover with frame
to be not less than 38 kg (weight of cover 23
kg and weight of frame 15 kg) R.C.C. top slab
with 1:2:4 mix (1 cement :2 fine sand : 4
graded stone aggregate 20 mm nominal size)
foundation concrete 1:5:10 (1 cement: 5 fine
sand : 10 graded stone aggregate 40 mm
nominal size), inside plastering 12 mm thick
with cement mortar 1:3 (1 cement: 3 fine sand)
finished smooth with a floating coat of neat
cement on walls and bed concrete etc.
complete as per standard design :
20.8.1 Inside dimensions 455x610 mm and 45 cm deep
for single pipe line :
5
37125
7424.9
... More
20.8.2 Inside dimensions 500x700 mm and 45 cm deep
for pipe line with one or two inlets :
2
16986
8492.8
... More
20.9 Extra for depth beyond 450 mm of brick
masonry chamber for underground C.I.
inspection chamber with same specification as
mentioned in item no 20.330 complete as per
standard design :
20.9.1 For 455x610 mm size
0.75
5042
6722.6
... More
20.9.2 For 500x700 mm size
0.4
2928
7319.4
... More
20.3 Providing and laying cement concrete 1:5:10 (1
cement : 5 fine sand : 10 graded stone
aggregate 40 mm nominal size) upto haunches
of S.W. pipes including bed concrete as per
standard design :
20.3.1 100 mm diameter S.W. pipe
145.5
89090
612.3
... More
20.10 Making soak pit 2.5 m diameter 3.0 metre deep
with 45 x 45 cm dry brick honey comb shaft
with well burnt 2nd class bricks and S.W. drain
pipe 100 mm diameter, 1.8 m long complete as
per standard design.
1
60700
60699.8
... More
301.4 Compacting Original Ground
303 (ii) Compacting original ground supporting subgrade
Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables
300.1 and 300.2 for subgrade construction as per MoRD Technical Specification Clause 303.5.2.
67.52
1742
25.8
... More
Brick soling
ii) Flat Brick soling
Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412.
225
123390
548.4
... More
iii) Brick edging laid in full brick width
Providing and laying brick edging on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412.
150
35349
235.66
... More
2.13 Earth work in excavation by mechanical means (Hydraulic
excavator) / manual means in foundation trenches or
drains (not exceeding 1.5 m in width or 10 sqm on plan)
including dressing of sides and ramming of bottoms, lift
upto 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soil as directed, within a lead
of 50 m.
-All kinds of soil
63.14
10702
169.5
... More
2.16 Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not
exceeding 20cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift
upto 1.5 m.
-All kinds of soil
42.09
5064
120.3
... More
2.19 Supplying and filling in plinth, under floor, foundations etc.
with sand (fine) from local quarry with all lifts including
spreading in horizontal layers, watering, grading to
required slope, ramming, consolidating and compacting
each layer by using plate compactor or by any suitable
method complete.
6.68
5929
887.5
... More
4.1 Providing and laying in position cement concrete of
specified grade excluding the cost of centring and
shuttering -
-All work upto plinth level:
4.1.15 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt
brick aggregate 40 mm nominal size)
16.69
130930
7844.8
... More
4.4 Centering shuttering including struttings, propping
etc. and removal of form work for:
4.4.1 Foundations, footings, bases for columns.
16.08
3837
238.6
... More
5.1 Providing and laying in position specified grade of
reinforced cement concrete excluding the cost of
centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
5.1.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
aggregate 20 mm nominal size)
17.14
188105
10974.6
... More
5.2 Reinforced cement concrete work in walls (any
thickness), including attached pilasters, buttresses,
plinth and skirting courses, fillets, columns, pillars,
piers, abutments, posts and struts etc. upto floor five
level excluding cost of centring, shuttering, finishing
and reinforcement-
5.2.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
aggregate 20 mm nominal size)
7.27
85727
11791.9
... More
5.3 Reinforced cement concrete work in beams, suspended
floors, roofs having slope upto 15° landings, balconies,
shelves, chajjas, lintels, bands, plain window sills,
staircases and spiral stair cases upto floor five level
excluding the cost of centring, shuttering, finishing
and reinforcement-
5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone
aggregate 20 mm nominal size)
3.32
40188
12104.7
... More
5.8 Centering shuttering including struttings, propping etc.
and removal of form work for:
5.8.1.1 Foundations, footings, bases for columns etc. for mass
concrete with timber plank
24.12
6486
268.9
... More
5.8.6.1 Columns, Pillars, Piers, Abutments, Posts and Struts with
shuttering ply
141.02
68113
483
... More
5.8.5.1 Lintels, beams, plinth beams, girders, bressumers and
cantilevers with shuttering ply
70.8
27272
385.2
... More
5.19 Reinforcement for R.C.C. work including straightening,
cutting, bending, placing in position and binding all
complete upto plinth level.
5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D or
more
4185.7
327322
78.2
... More
6.1 First class brick work in foundation and plinth
including cost of all materials as required complete:-
6.1.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ).
10.68
92105
8624.1
... More
6.12 Half brick masonry work with first class bricks in
superstructure upto floor five level including cost of
all materials as required complete:-
6.12.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ).
159.3
217142
1363.1
... More
8.46 Providing and fixing M.S. grills of required pattern in
frames of windows etc. with M.S. flats, square or
round bars etc. all complete.
8.46.2 Fixed to openings /wooden frames with rawl plugs
screws etc.
759.15
95957
126.4
... More
12.1 12 mm cement plaster of mix
12.1.2 Cement mortar 1:4 (1 cement : 4 fine sand)
314.15
54913
174.8
... More
15 mm cement plaster on the rough side of single or
half brick wall of mix:
12.2.2 Cement mortar 1:4 (1 cement : 4 fine sand)
253.15
51491
203.4
... More
12.5 Neat cement punning.
61
2751
45.1
... More
12.31 Finishing walls with premium acrylic smooth exterior
paint with Silicon additives of required shade of
approved brand and manufacture [Payment shall be
made after submission of Test Certificate issued by the
Manufacturer] :
12.31.1 New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer
applied @ 2.20 kg/10 sqm)
567.3
67679
119.3
... More
12.47 Painting with synthetic enamel paint of approved brand
and manufacture to give an even shade [Payment shall
be made after submission of Test Certificate issued by
the Manufacturer]:
12.47.1 Two or more coats on new work
37.8
3130
82.8
... More
G.I Barbed Wire Fencing 1.8 m high.
Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m RCC M15 grade 150 mm x 150 mm concrete post placed every 3 m centre-to-centre founded in M15 grade cement concrete, 0.6 m below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc. complete as per MoRD technical specification Clause 1705.
150
111015
740.1
... More
Armless Chair Superior Clear Varnish
55
147620
2684
... More
Armed Chair Colour Varnish
10
30210
3021
... More
VIP Chair Colour Varnish (Half Back Cushion)
2
7654
3827
... More
Reading Table(3'x2') Colour Varnish
10
45260
4526
... More
Teachers Common Room Table(8'x4') With (8) eight side Drawer, Color Varnish.
1
25577
25577
... More
Center Tool with Superior glass top
colour
1
3334
3334
... More
Computer Table,Standard,Colour Varnish (L-42xW-22)
1
11434
11434
... More
Almirah with mirror,Superior Colour varnish three shelves(5'x3'x22")
1
35759
35759
... More
Book Rack with Sutter (4'x3'x18")
colour varnish
2
27828
13914
... More
Dining Table Ply Board top with 6mm glass top(8'x3') 8 Seated,Colour varnish.
4
78572
19643
... More
Dining Table ply board top with 6 mm glass (6' x 3'), 6 seated,colour vernish
1
12192
12192
... More
Dining Chair, Rexine & 2" foam
Superior seat colour vamish
30
101100
3370
... More
Bed Single (6.5'x3')for Hostel &
Dormitory Superior Colour Varnish
50
619850
12397
... More
Bed Semi Double (6.5'x4') for Guest House Colour Varnish with stand
1
18463
18463
... More
Drilling and boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at variuse suitable levels, preservation of samples in polythene bags/ sample box and disposal of excess soil or mud, including the cost of water etc, as required to mantain the pilot hole properly as per specification and direction of the Engineer-in charge.
100 MM
90
33048
367.2
... More
Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means, disposal of excess soil or mud, including the cost of water etc, as required to mantain the pilot hole properly as per specification and direction of the Engineer-in charge.
i) From 100mm dia pilot hole to 250mm bore hole
90
31329
348.1
... More
Providing and lowering of PVC pipe of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-in-charge. A) CM Casing pipe (UPVC) 150 MM
36
38088
1058
... More
Providing and lowering of PVC pipe of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-in-charge. A) CM Casing pipe (UPVC) 100 MM
24
11669
486.2
... More
Providing and lowering of PVC pipe of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-in-charge. A) RS pipe
27
20588
762.5
... More
Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer in charge.
87.01
3089
35.5
... More
Providing and shrouding of the deep tube well assembly with washed pea gravels (2.0 - 4.75 mm effective size) as per specification (IS: 4097) and direction of the Engineer in charge.A) With contractor rig
i) with pea gravels obtained from Durgapur, West Bengal
3.4
41273
12139.2
... More
Providing and fixing of UPVC end cap/ well cap suitable for UPVC 'CM' casing or 'CS' casing or RS pipe as per specification and direction of the Engineer in charge.
i) 100mm dia
1
449
449.5
... More
Providing and fitting fixing GI pipe (Medium class) conforming to IS 1239 for column pipe assemble for instalation of submersible pump motor as per direction of Engineer in charge. d) 40mm NB
27
10584
392
... More
Providing and fitting fixing GI bend/ elbow in the pipe line including testing of joints complete as per direction of Engineer in charge. v) 40mm NB
1
282
281.8
... More
Providing and fitting fixing of GI flange (10mm wall thickness) by welding with GI/ MS pipe as per placing position as per specification and the direction of Engineer in charge. v) 50mm dia
2
528
264.5
... More
Providing and fitting fixing of CI non return valve of approved quality as per CPWD pecification and the direction of Engineer in charge.
i) 50mm nominal bore
1
2889
2888.8
... More
Providing and fitting fixingof 6feet x 4feet x1 inch (thickness)gamai wood/ plywood/ plypanel board for fitting fixing of electric items in/c 2no's MS angle post (size 2 inch x 2inch x 9feet) nut & bolts for irrection of the same by 1:1.5:3 cement concrete casting (1 feet x 1feet x 2feet) below the ground level and painting two or more coats & plastic paint as per specification and the direction of Engineer in charge
1
7848
7847.8
... More
Installation of submerssible pump and suitable motor upto requirede depth with GI column pipe in/c providing fitting fixing by necessaqry rubber washer , nuts & bolts, Ms safety clamp etc. As per required size and making necessary electrical connection with main switch/starter with motor in/c commissioning & trial run as per direction of the Engineerin charge (pump, motor with cable, GI Pipe will be issued by the Department at free of cost and fabrication of GI column pipe will be paid separately)
i. 2500 GPH capacity
27
10633
393.8
... More
Providing 2 HP submerssiblepump as per direction of Engineer in charge
1
21420
21420
... More
Providing and fixing of UPVC reducer suitable for UPVC 'CM' casing or 'CS' casing or RS pipe as per specification and direction of the Engineer in charge. SOR-2015
1
869
869.1
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements