Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Installation Of 10000 Ltr Per Hour Capacity Packaged Type Irp Including Installation Of 1 No Sbdtw With Electrical Equipments Etc in West Tripura, Tripura, with an estimated contract value of Rs. 28,43,605. The bid opening date for this tender is 06-06-2025 and the last date for bid submission is 26-06-2025. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Public Works Department - PWD Tender
Civil And Construction
Electrical and Electronics
Water Storage And Supply
Electrical Works
Eprocure
Opening Date6 Jun 2025
Closing Date26 Jun 2025
Tender Amount₹ 28,43,605
Costs
EMD
₹ 56,872Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Installation Of 10000 Ltr Per Hour Capacity Packaged Type Irp Including Installation Of 1 No Sbdtw With Electrical Equipments Etc
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_Urban_62431_1Tender No
04/SE/TJB/2025-26Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://tripuratenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
A. 'CM' Casing pipe i) 100mm dia.
40
607
-
... More
A. 'CM' Casing pipe i) 150mm dia.
30
1318
-
... More
B. 'RS' pipe i) 100mm dia.
30.5
951
-
... More
Providing and fixing of UPVC reducer suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engg-in-charge. i) 150 x 100mm dia
1
1082
-
... More
Providing and fixing of UPVC end cap suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge. i) 100mm dia.
1
560
-
... More
Washing and development of tube well by using hand pump or by any suitble method and testing of the well as per specification and direction of the Engineer - in - charge.
100
47
-
... More
Supplying and installation of water lubricated submersible pump having ISI mark of capacity 2000 GPH at total head up to 60 Mtr. Coupler with submersible motor 3 HP suitable for 240 Volts (+ 10% varitions single phase 50 HP, AC supply DOL starting method to run at 2880 RPM along with 35 Mtr., 2.50 Sqm. PVC insulated 3(Three) Crore flat copper cable in/c fitting, fixing and lowering it with 40mm dia GI pipe up to 100 ft. (30.00 Mtr.) etc. complete as per specification and direction of the Engg-in-charge. (40mm dia GI pipe and fitting will be paid separatelaly.
1
34721
-
... More
Providing and Shrouding of the deep tube well assembly with washed pea gravels ( 2.0 - 4.75 mm effective size) as per specification (IS : 4097) and direction of the Engineer - in - charge.i i) Pea gravels obtained from Golaghat, Assam.
4
13875
-
... More
Supplying and fitting, fixing of single phase motor starter pannel unit 3.0 HP capacity comprising with 2 pole conductor, over load relay capacitor, volts meter of BCH/ L&T make with necessary copper wire etc. complete as per direction of the Engg-in-charge.
1
4407
-
... More
Supplying and fitting, fixing of 32 Amps single phase Main Switch of BCH/L&T/ Havels make with necessary copper wire etc. complete as per direction of the Engineer-in-charge.
1
1394
-
... More
Providing and fixing G.I. pipes heavy class as per IS:1239 with latest amendment complete with G.I. fittings in/c trenching and refilling, cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Engg-in-charge. A. External work.
-
-
-
... More
i.15 mm dia nominal bore
15
301
-
... More
ii.20 mm dia nominal bore
15
369
-
... More
iii.25 mm dia nominal bore
30
494
-
... More
v. 40 mm dia. nominal bore
500
687
-
... More
Providing and fitting fixing of brass fullway valve with handle in the GI pipe line including cutting, threading etc. complete as per CPWD specification and direction of the Engineer-in-charge. v. 40 mm dia
8
885
-
... More
Providing and fixing G.I. Bend/elbow in the pipe line in/c testing of joints complete as per CPWD specification and direction of the Engg-in-charge. v. 40 mm dia
8
343
-
... More
Providing and fixing G.I. equal Tee with the pipe line in/c testing of joints complete as per CPWD specification and direction of the Engineer-in-charge. v. 40 X 40 X 40mm dia
8
289
-
... More
Providing and fixing of Brass Union Joints (Medium class) with the pipe line in/c testing of joints complete as per CPWD specification and direction of the Engineer-in-charge. v. 40 mm dia
6
395
-
... More
Providing and fixing G.I. Reducer with the pipe line in/c testing of joints complete as per CPWD specification and direction of the Engineer-in-charge. xxii. 80 X 40mm dia
1
401
-
... More
Providing & fixing of 10m clamp (made with 12mm thick MS sheet) along with well cap (made of with 10mm thick MS sheet) with necessary arrangement of SBDTW as per specification and direction of the Engineer-in-charge. (ii) 150mm dia
1
3909
-
... More
Earth work in excavation by mechanical means (Hydraulic excaator/ manual means in foundation trenches or drain (not exceeding 1.5m in width or 10sqm on plan) in/c dressingof sides and ramming of bottoms, lift up to 1.5m in/c gettting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil.
30
231
-
... More
Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. A) Class - 3 ( working pressure 6.0 kg / cm2)i) 40mm OD
75
89
-
... More
Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. i) 40mm OD
8
161
-
... More
Providing, fixing and laying fabricated UPVC equal tee conforming to IS:10124(part 5) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.(i.)40X40 mm dia
4
232
-
... More
Supplying and filling in plinth, under floor, foundation etc. with sand (fine) from local quarry with all lifts in/c spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
20
1177
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5m All kinds of soil.
20
161
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level:
-
-
-
... More
a) 1:3:6 (1cement : 3 fine sand : 6 graded well burnt brick aggregate of 20mm nominal size)
10
9938
-
... More
a) 1:2:4 (1cement : 2 fine sand : 4 graded well burnt brick aggregate of 20mm nominal size)
5
10742
-
... More
First class brick work in foundation & plinth in/c cost of all materials required complete. a) In cement mortar 1:4 (1 cement : 4 fine sand)
12
9845
-
... More
First class brick work in superstructure above plinth level in/c cost of all materials required complete. a) In cement mortar 1:4 (1 cement : 4 fine sand)
5
11410
-
... More
Half brick masonry work with first class bricks in superstructure up to floor five level including cost of all materials as required complete. In cement mortar 1:4 ( 1 cement : 4 fine sand )
80
1533
-
... More
Reinforcement for RCC works in/c straightening, cutting, bending, placing in position & binding all complete up to plinth level. Thermo-Mechanically Treated bars/Cold twisted deformed steel bars
450
103
-
... More
Centering shuttering in/c strutting, propping etc. and removal of form work for : i) Foundations, footings, bases for columns
3
333
-
... More
Centering shuttering in/c strutting, propping etc. and removal of form work for : i) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank.
25
391
-
... More
Providing and laying in position specified grade reinforced cement concrete ex/c the cost of centering and shuttering, finishing and reinforcement. All work up to plinth level: a) 1:1.5:3 (1cement : 1.5 fine sand : 3 graded stone aggregate of 20mm nominal size)
5
12073
-
... More
Providing and laying cement concrete 1:2:4 ( 1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement in/c cement at slurry, rounding of edges and strips and cost of glass strips etc. complete. a) 40 mm thick with 20mm stone aggregate
25
614
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
i) Hot finished welded type tubes
250
146
-
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. a) 0.63mm thick with zinc coating not less than 275gm/m2.
40
1205
-
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:- a) Using flats 40 X 40 X 6mm for diagonal braces.
6.5
4711
-
... More
12mm cement plaster of mix: In cement mortar 1:4 ( 1 cement : 4 fine sand )
200
224
-
... More
Neat cement punning.
65
56
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. (Payment shall be made after submission of test certificate issued by the Manufacturer) 12.48.1 Two or more coats on new works over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture.
45
154
-
... More
Finishing walls with water proofing cement paint of required shade of approved brand and manufacture (Payment shall be made after submission of test certificate issued by the Manufacturer) : 12.28.1 new work (two or more coats applied @3.84 Kg/10sqm).
175
78
-
... More
Providing, installation and commissioning of Iron Removal Plant comprising of Iron Removal Filter standard composit pressure vessel made of corrosion resistant high quality IRP filter media comprises Silica dioxide 90% Manganese Dioxide & other non-leaching chemicals. All chemicals are infused & thereby ensure long life of media fitted with and on site chlorine generator (25gm/ltr). Electro chlorinator producing hypochlorite solution using common salt as raw materials for oxidation & disinfection through metering pump & multiport value provided to operate the system very easily by changing the knob in to back wash, close filtration mode whenever needed in/c fitting, fixing of necessary pipe line for raw water, interconnection all chambers delivery outlet as required with suitable engineering plastic as per direction of Engineer-in-charge. A) 10,000 LTR per hour capacity
1
1351250
-
... More
Operation, upkeepment and maintenance of whole plants and other allied equipments etc. in/c supply of chemicals and consumable materials, filter media etc. as per direction of Engineer-in-charge.
30
166
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%