Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Construction Of Cluster 24 (twenty Four) Nos Lift Irrigation Schemes In Different Block Areas In Tripura (job No. Tr/03/special Assistance For Capital Investment /2024-25)/li Scheme At Telkajla Near The Land Of Sri Govinda Das Over Gomati River Under in West Tripura, Tripura, with an estimated contract value of Rs. 54,11,265. The bid opening date for this tender is 25-03-2025 and the last date for bid submission is 16-04-2025. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Public Works Department - PWD Tender
Opening Date25 Mar 2025
Closing DateCancelled
Tender Amount₹ 54,11,265
Costs
EMD
₹ 1,08,225Document Cost
₹ 4,000Tender Fee
Refer Documents
Summary
Construction Of Cluster 24 (twenty Four) Nos Lift Irrigation Schemes In Different Block Areas In Tripura (job No. Tr/03/special Assistance For Capital Investment /2024-25)/li Scheme At Telkajla Near The Land Of Sri Govinda Das Over Gomati River Under
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEWR_59771_1Tender No
127_SE_WRC_I_DNIET_2024_25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.tripura.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
140 mm dia
546
646
352880
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement. - All work upto plinth level.- a) 1 : 2 : 4 ( 1 cement : 2 fine sand : 4 graded well burnt brick aggregate of 20 mm nominal size)
0.42
11080
4654
... More
110 mm dia
600
380
228324
... More
iv)160 mm dia
2
1434
2869
... More
Providing Ridge or Hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers including a coat of approved steel primer and two coats of approved paint complete. 0.63 mm thick with zinc coating not less than 275 gm / m2.
10
730
7308
... More
125 mm dia PVC Pipe
4
1121
4488
... More
Providing and fixing plain bend of required degree. 100mm dia Sand cast iron S&S as per IS - 1729
1
558
559
... More
ii) 110 mm dia.
6
940
5645
... More
Supplying and fitting fixing of Indicator bulb (Flush type containig 3 nos batton holder with bulb)) on the panel board of approved quality.
3
117
352
... More
Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. i. 125 mm dia.
4
2309
9237
... More
Providing, fixing and fabricated UPVC end cap conforming to I.S. 10124 (Part-4) with solvent cement conforming to I.S. 14182 including testing of joints complete as per CPWD specification and direction of the Engineer-in -Charge.
i) 90 mm dia.
10
148
1487
... More
ii) 125 mm dia.
4
1121
4488
... More
Providing and laying different dia rigid UPVC pipes of Working Pressure 4.0 kg/ sq.cm. complete with necessary coupler and solvent cement as per CPWD Specification & direction of Engineer-in-charge.
90 mm dia
1440
272
392674
... More
iii) 140 mm dia.
2
250
501
... More
Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge.
1
7837
7837
... More
250 mm dia
180
2081
374738
... More
Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-incharge.
2
1135
2271
... More
150 mm dia.
2
7395
14790
... More
Providing and fixing G.I. pipes of Heavy class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.
i. 125mm dia.
90
2026
182340
... More
Centring shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platforms with timber planks
19.65
577
11340
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: (i) Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture
22.32
154
3446
... More
i. 150 mm dia.
30
588
17652
... More
Providing and fitting G.C.I sheet (0.63 mm thick) for walling including Vertical/curved surface fixed with galvanized steel J or L hooks 8 mm diameter, bolts and nuts with bitumen and G.I limpet washers or with G.I. limpet Washers filled with white lead and including a coat of appoved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/Verticle or curved surfaces ) excluding the cost of G.S. sheet purlins rafters and trusses and including cutting to size and shape wherever required as per direction of Engineer -in-Charge.
64.2
773
49632
... More
Providing and fixing in position 1 mm thick M.S. sheet door/windows with frame of (40 x 40 x 6) mm angle iron and 3 mm thick M.S. gusset plates at the junctions and corners and with cleats with bolts and nuts, revet locking arrangements, handles, hooks and eyes, pin lets including embedding in cement concrete of required grade for fixing in position, all necessary fittings including applying a coat of priming coat of approved steel primer etc. complete as required.
9.81
4711
46222
... More
Providing and fixing C.I. sluice valves ( with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) as per CPWD specification and direction of the Engineer - in - charge.
(PN-1.0)
125 mm dia.
2
5426
10853
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
75
103
7793
... More
Neat cement punning .
89.21
56
5067
... More
A. PN - 1.0 200 mm dia.
2
14423
28847
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level a) 1 : 4 : 8 ( 1 cement : 4 fine sand : 8 graded well burnt brick aggregate of 40 mm nominal size)
18.74
8980
168285
... More
b)140 x 110mm dia
6
731
4388
... More
iii) 140 mm dia.
6
1249
7497
... More
Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm (slope-1 in 200)including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in Charge
A) All kinds of soil.
ii) For pipes exceeding 90 mm dia but not
exceeding 300 mm dia
180
106
19152
... More
Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) ( 12 mm dia perforation ) , laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-incharge. For 3 phase connection with 4.00 mtr long G.I. pipe.
1
23655
23656
... More
110 x 110 x 110 mm dia
4
1125
4502
... More
Providing and fitting fixing PVC suction hose pipes of wall thickness 6 mm. as per relevant IS specification and direction of Engineer-in charge. (a)150 mm dia
30
859
25797
... More
Providing and fitting fixing of G.I hydrant suitable for PVC pipes as per standard specification complete as per direction of Engineer-incharge (Rate excluding the cost of NTP control valve).
a) 80 x 50mm dia.
50
2864
143228
... More
Providing and fixing soil, waste and vent pipes. Sand cast iron S&S pipe as per IS: 1729.
2.5
1220
3051
... More
Supplying & fitting fixing power capacitor (ISI Marked) of approved quality.
(i) 20 KVAr
2
12959
25918
... More
160 mm dia
396
826
327266
... More
First class brick work in foundation and plinth including cost of all materials as required complete in Cement mortar 1:4 ( 1 cement : 4 fine sand)
37.71
9845
371262
... More
Providing and fixing single equal plain junction of requires degree.
1
768
768
... More
Providing & fitting fixing MS tail piece with MS flange suitable for pipes complete as per CPWD Specification & direction of Engineerin-charge.
80 mm dia PVC Pipe
8
759
6073
... More
12 mm cement plaster of mix in Cement mortar 1:4 ( 1 cement : 4 fine sand).
89.21
224
20001
... More
Providing & fitting fixing of MS flange (8 mm wall thickness) by welding with G.I. / MS pipe and placing position as per spe-cification and the direction of the Engineer-in-charge.
i. 125 mm dia.
30
512
15381
... More
Earthwork in excavation by Mechanical means (Hydraulic excavator)/ manual meams over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan ) including disposal of excavated earth, lead up to 50 m and lift upto 1.5 m, disposed earth to be leveled and neatly dressed. - all kinds of soil
101.25
179
18215
... More
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete
In cement mortar 1:4(1cement:4 fine sand)
24.3
1533
37264
... More
90 x 90 x 90 mm dia
4
1012
4051
... More
Providing and fitting fixing MS Foot valve as per relevant IS specification and the direction of the Engineer-in-charge.
i) 150 mmdia
4
3377
13508
... More
Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineerin- charge. i) 63 Amps.
2
4540
9082
... More
Providing and fixing C.I. non-return valve of approved quality as per CPWD specification and direction of the Engineer - in - charge.
i) 125 mm
2
9367
18736
... More
c)110 x 90mm dia
8
597
4781
... More
d)140 x 90mm dia.
4
395
1583
... More
Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge.
i) 63 - 80 Amps
1
5263
5263
... More
Filling available excavated earth (excluding rock) in trenches, plinth, under floor, sides of foundations etc. in layers, not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift up to 1.50 m.
21.57
161
3479
... More
Supplying and fitting fixing of selector switch on the panel board of approved quality.
2
564
1129
... More
Providing and fitting fixing rigid UPVC Reducing socket (one size lower at one end, both end socketted) suitable for pipes of Working pressure 4.0 kg/sq.cm. as per CPWD Specification & direction of Engineer-in-charge.
a)160 x 140mm dia
6
888
5331
... More
Sub-Head : ( A) Construction of Pump House
Earthwork in excavation by Mechanical means (Hydraulic excavator)/ manual meams in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mtr. - all kinds of soil
32.78
231
7592
... More
ii. 150 mm dia.
90
2380
214236
... More
Providing and fitting fixing M.S. clamp for hose pipes with nuts & bolts complete as per relevant IS specification and direction of Engineer-in-charge. a)150 mm dia,
4
191
764
... More
Welding by gas or electric plant including transportion of plant at site etc. complete as per standard design.
300
4
1440
... More
Providing corrugated G.S. Sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks , bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( upto any pitch in horizontal/vertical or curved surfaces ) excluding the cost of the purlins, rafters and trusses and including cutting to size and shape wherever required.
For Roof & walls.
0.63 mm thick with zinc coating not less than 275 gm / m2
63.75
1205
76844
... More
Sub-head : (B) Installation of 2 (Two)Nos. of Pump-Motor sets with proper electrification.
Providing and Installation of Horizontal pump motor set (Centrifugal) with allied equipments by maintaining proper level/slope, alignment etc. in/c all necessary nuts & bolts, washers etc. at site of work and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run for 10hrs. in two spell as per direction of the Engineer-in-charge.
(i) 25 HP motor with 60 LPS 22 m head pump
2
243208
486417
... More
Providing & fitting fixing MS tail piece with MS flange suitable for pipes complete as per CPWD Specification & direction of Engineer-incharge.
i) 150 mmdia
4
1348
5394
... More
Supplying & fitting fixing of PVC insulated Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality.
(i) 7/16 Copper Wire
95
285
27105
... More
Providing and laying cement concrete 1:2:4 ( 1 cement : 2 fine sand : 4 graded well burnt brick aggregate ) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. complete. 40 mm thick with 20 mm wel burnt brick aggregate
35.25
597
21058
... More
Providing and fitting fixing of CI(Cast Iron) NTP control valve (40 mm) suitable for fitting fixing with GI hydrant point as per CPWD Specification & direction of Engineer-in-charge.
50
876
43818
... More
First class brick work in superstructure above plinth level & upto floor five level including cost of all materials as required In Cement mortar 1:4 ( 1 cement : 4 fine sand )
1.8
11410
20538
... More
Providing & fixing MS bolts with nuts & washer complete as per standard design.
Upto 300 mm length
12
139
1674
... More
Providing & fitting fixing rigid UPVC bend (30 degree,45 degree,60 degree, 90 degree) for UPVC pipes as per IS specification of Working pressure 4.0 kg/sq.cm as per CPWD Specification & direction of Engineer-in-charge.
i) 90 mm dia.
8
838
6709
... More
160x 160 x 160 mm dia
4
1614
6456
... More
Sub-head: ( C )Distribution system of UPVC pipes.
Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm (slope-1 in 200)including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in Charge
A) All kinds of soil.
ii) For pipes exceeding 90 mm dia but not
exceeding 300 mm dia
3527
106
375273
... More
Providing and fixing water closet squatting pan ( Indian type W.C.Pan ) with 100 mm Sand cast iron P or S trap 10 litre low level white PVC flushing cistern with manually controlled device (Handle lever)conforming to IS 7231 with all fittings and fixtures complete i/c cutting and making good the walls and floors wherever required :-
a) White vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rest.
1
5680
5680
... More
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required.
50
142
7115
... More
200 mm dia
300
1313
394056
... More
Providing and fitting fixing of moving iron type, Range 0- 100/0-200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer in-charge.
2
1964
3930
... More
Providing and fixing terminal guard.
Sand cast iron S&S as per IS - 1729
2
490
980
... More
b) 1 : 2 : 4 ( 1 cement : 2 fine sand : 4 graded well burnt brick aggregate of 20 mm nominal size)
10.06
10742
108071
... More
i. 150 mm dia.
30
142
4267
... More
150 mm dia PVC Pipe
4
1348
5394
... More
Providing and fitting fixing of M.S shore manifold made with 3mm thick MS sheet of size one way 315 mm dia & three way 125 mm dia made with suitable flange(all end) including coating with steel primer(tailpiece if required will be paid separately) including proper alignment with pipe line & earth cutting, backfilling complete as per direction of Engineer-in-charge.
1
19892
19893
... More
315 mm dia
65
3211
208764
... More
Providing & fixing 200 Amps busbar of size 600X 450X100 mm with 4 nos. copper strip of size 450X40X4 mm of approved quality.
1
5944
5945
... More
Providing and fixing M.S. round holding down bolts with nuts and washer plates complete as per standard design for Tubular Post.
95.2
103
9891
... More
ii) 110 mm dia.
6
174
1048
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
10.16
1177
11961
... More
ii) 100 Amps.
1
4936
4937
... More
250 mm dia.
2
20884
41769
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses includng cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes.
weight of 275 kg per bay considered including bracings in walls, nut bolts and clamps etc. complete.
1100
143
157520
... More
Supplying & fitting fixing manually operated oil immerged starter of approved quality.
30HP Osco/BCH Make
2
15456
30912
... More
Providing and fixing G.I. equal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
125 X 125 X 125 mm dia
4
1486
5946
... More
100 mm dia PVC Pipe
6
830
4981
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
West Tripura, Tripura