Public Works Department Tender

20 mm thick open - graded premix carpet using Bituminous ( penetration grade / modified bitumen ) Binder. Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 KN Static rollar capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per Technical MoRD Specification Clause 508. By Manual means 1) Bitumen (60/70 Grade) VG-30

Providing and laying seal coat sealing the voids in a bituminious surface laid to the specified levels, grade and cross fall using Type A, or Type B or Type C or type D as per MoRD Techinical Specification Clause 510. A. By Manual Means. Case IV Type D (Premix with fine sand). 1) Bitumen (60/70 Grade) VG-30

A. Without dewatering Earth work in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50m, dressing of sides & bottom and back filling in trenches with excavated suitable material. a) Ordinary Soil: - i) 3.00 metre depth

Filling in foundation trenches as per drawing & MoRD Technical specification Clause 305.3.9, 1200. ( i ) Sand filling

Providing concrete for plain concrete ( Using Jhama Brick aggregate ) in open foundations complete as per drawings & MoRd technical specificatioins Clauses 802, 803, 1202 & 1203.( in/c. centering and shuttering, staging etc. but ex/c. reinforcement.) ( I ) P.C.C grade M10 ( Using Jhama Brick aggregate ) (a) Nominal Mix 1:3: 6

Brick Masonry work in cement morter in Sub structure complete excluding pointing and plastering as per drawing and Mord technical specification clauses 602,603,604,1202, & 1204 (i) In 1: 4 cement morter

Plastering with cement mortar (1:4) 12 mm thick on brickwork / C.C. work including a finishing coat of neat cement punning with 2.75 Kg of cement per sqm in substructure as per MoRD technical specification Clauses 613.4 & 1204

Patch repairing/ Maintenance of bituminous surface road using Jhama brick aggregate & Viscocity Graded bitumen (VG-30). Repairing pot-holes and making up small depressions with ramming or power rolling after removal/ disposal of disintegrated materials within a lead of 50 m, cutting pot holes to regular shapes with vertical edges and levelling the bottom, cleaning the same with compressed air or any other appropriate method including screening, cleaning of aggregates; and filling up with with jhama chips using bitumen of VG-30 @ 54 kg per m3 of loose volume of jhama brick chips, after applying tack coat of bitumen on sides and bottom @ 0.75 kg/ sqm and finishing the top of repaired surface levelled with adjoining area in proper grade and camber including spreading of sand @ 0.006 cum/ sqm of prepared road surface as per direction of the Engineer-in-Charge and all as per MoRD technical specification Clauses 1900, 502, 503 and 504.