Public Works Department Tender

Providing and fitting fixing of 10000 GPH capacity & 20 HP, 76 mtr. Head minimum 3 star rating water lubricated submersible pump motor set of maximum 150/200 mm outlet dia, with maximum 8(Eight) stages coupled with required water and non-overloading submersible pump & motor suitable for 340-440 volts, 3 ph. 50Hz, AC supply and star delta method of starting along with 35 mtr x 1x2x3x10 sqmm joint less PVC 3(three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non return valve cum discharge case in/c. supplying of 10 Nos suitable guard with clips and nuts and bolts, 2(two) pair M.S clamps in/c. installation of submertsible pump & motor upto the depth of 100 ft by GI pipe(conforming to IS: 1239 medium class) as per direction of the Engineer-in-charge conforming to terms and condition of the contract(each pump with motor shall consist of stainless closed type impeller, CI bowl, CI discharge case, pump shaft(stainless steel), bush(bronze), shaft sleeve(Bronze/Chromium), sand guard widening, motor, starter, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant BIS codes)(GI flange, GI column pipe will be issued by the Department at free of cost)

Providing and fitting fixing of 7500 GPH capacity & 15 HP, 76 mtr. Head minimum 3 star rating water lubricated submersible pump motor set of maximum 150/200 mm outlet dia, with maximum 8(Eight) stages coupled with required water and non-overloading submersible pump & motor suitable for 340-440 volts, 3 ph. 50Hz, AC supply and star delta method of starting along with 35 mtr x 1x2x3x10 sqmm joint less PVC 3(three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non return valve cum discharge case in/c. supplying of 10 Nos suitable guard with clips and nuts and bolts, 2(two) pair M.S clamps in/c. installation of submertsible pump & motor upto the depth of 100 ft by GI pipe(conforming to IS: 1239 medium class) as per direction of the Engineer-in-charge conforming to terms and condition of the contract(each pump with motor shall consist of stainless closed type impeller, CI bowl, CI discharge case, pump shaft(stainless steel), bush(bronze), shaft sleeve(Bronze/Chromium), sand guard widening, motor, starter, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant BIS codes)(GI flange, GI column pipe will be issued by the Department at free of cost)

Providing, fitting fixing and installation of 5,000 GPH,10HP x 76 mtrs. Head water lubricated submersible pump of maximum 150 mm outer dia. With maximun 10(Ten) stages coupled with required water and non-cover loading submersible motor suitable for 340-440 volts, 3 phase 50Hz, AC supply and star delta method of starting along with 35 mtrs. x 2 x 3 x 4 sq.mm joint less PVC 3 (three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non- return valve cum discharge case including supplying of 10 Nos. suitable cable guard with clips and nuts & bolts, 2 (two) pair M.S. column clamps as per direction of Engineer-in-charge conforming to terms & conditions of the contract (Each pump with motor shall consists of stainless stell closed type impeller , C.I. bowl, C.I discharge case, pump shaft (styainless steel), bush (bronze), shaft sleeve (bronze/ chromium), sand guard, winding rotor, stator, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant BIS codes of made (GI flange, GI column pipe will be issued by the Department at free of cost)