Public Works Department Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Costs
EMD
₹ 13,20,968Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_CEPWD_33280_1Bid Award Id
ViewTender No
CE(Bld)/PWD/ACE/PU/61/2022-23Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.tripura.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. - All kinds of soil
2077.78
-
120.3
... More
Extra for additional lift of 1.5m or part thereof. - All kinds of soil
645.76
-
49.8
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
399.88
-
887.5
... More
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
... More
(i) Chlorpyriphos/Lindane emulsifiable concentrate of 20%
296.74
-
212.1
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment as per IS: 6313 (Part III)- Latest revision (excluding the cost of chemical emulsion):
-
-
-
... More
(i) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. - With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
205.82
-
17.1
... More
(ii) Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling: - With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
756.98
-
94.9
... More
SUB-HEAD : CEMENT CONCRETE WORK
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - - All work upto plinth level:
-
-
-
... More
(i) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size)
241.71
-
9324.5
... More
(ii) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
7.85
-
10456.6
... More
(iii) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
33.18
-
9872.1
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
(i) Foundations, footings, bases for columns.
253.59
-
238.6
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification
601.44
-
61.5
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
252.98
-
810.5
... More
SUB-HEAD : RCC WORK
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
-
-
-
... More
(i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
657.22
-
10974.6
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-
-
-
-
... More
(i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
152.01
-
11791.9
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-
-
-
-
... More
(i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
518.65
-
12104.7
... More
Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with
-
-
-
... More
(i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
3.12
-
12430.1
... More
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with
-
-
-
... More
(i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
9
-
11909.3
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
(i) Thermo-Mechanically Treated bars of grade Fe-500D or more
105685.08
-
78.2
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
(i) Thermo-Mechanically Treated bars of grade Fe-500D or more
102009.09
-
78.2
... More
Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits
-
-
-
... More
(i) 50 mm thick
84
-
1134.4
... More
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size).
9
-
15164.5
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
... More
(i) Foundations, footings, bases for columns etc. for mass concrete with timber plank
309.26
-
268.9
... More
(ii) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
163.6
-
370
... More
(iii) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
1807.68
-
539
... More
(iv) Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
3458.28
-
385.2
... More
(v) Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
2085.53
-
483
... More
(vi) Stairs (excluding landings) except spiral-staircases with wooden plank
129.39
-
477.8
... More
(vii) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards.
45
-
354.1
... More
(viii) Edges of slabs and breaks in floors and walls under 20 cm. wide
806.46
-
99.5
... More
(ix) Weather shade, Chajjas, corbels etc., including edges.
83.01
-
417.7
... More
Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour /shade of wall treatment.
-
-
-
... More
(i) Non-asbestos fibre cement board 6 mm thick as per IS: 14862 [150mm wide]
64
-
179.6
... More
SUB-HEAD : BRICK WORK
-
-
-
... More
First class brick work in foundation and plinth including cost of all materials as required complete:-
-
-
-
... More
(i) In cement mortar 1:4 ( 1 cement : 4 fine sand ).
79.3
-
8888.4
... More
(ii) In cement mortar 1:6 ( 1 cement : 6 fine sand ).
61.13
-
8624.1
... More
First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-
-
-
-
... More
(i) In cement mortar 1:6 ( 1 cement : 6 fine sand ).
398.52
-
9859.7
... More
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-
-
-
-
... More
(i) In cement mortar 1:4 ( 1 cement : 4 fine sand ).
2038.98
-
1363.1
... More
Extra for providing & placing in position 2 nos 6mm dia MS bars at every 6th course of full brick masonry work including anchorage in joints of 75mm in each side in superstructure for all level including cost of all materials as required complete:-
-
-
-
... More
(i) In cement mortar 1:6 ( 1 cement : 6 fine sand ).
398.52
-
517.1
... More
Extra for providing & placing in position 2 nos 6mm dia MS bars at every 4th course of half brick masonry work including anchorage in joints of 75mm in each side in superstructure for all level including cost of all materials as required complete:-
-
-
-
... More
(i) In cement mortar 1:4 ( 1 cement : 4 fine sand ).
1418.98
-
197.4
... More
SUB-HEAD : CLADDING WORK
-
-
-
... More
Providing and fixing gang saw cut of approved thickness mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 ( 1 cement : 4 fine sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing , curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels:-
-
-
-
... More
(i) 18 mm thick Rajnagar Plain white marble/ Udaipur green marble/ Zebra black marble or equivalent duly approved:- - Area of slab upto 0.50 sqm.
20.06
-
2131.2
... More
(ii) 18 mm thick Granite of any colour and shade duly approved:- - Area of slab upto 0.50 sqm.
10.58
-
3505.9
... More
Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge:-
-
-
-
... More
(i) 18 mm Marble work.
73.3
-
160.1
... More
(ii) 18 mm thick Granite work.
14.1
-
275
... More
SUB-HEAD : WOOD & PVC WORK
-
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :
-
-
-
... More
(i) Local Teak wood
5.59
-
87719.7
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mm thick.
-
-
-
... More
(i) Local Teak Wood 16mm. Thick
20.16
-
1624.2
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.
-
-
-
... More
(i) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
141.78
-
1786.6
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.
-
-
-
... More
(i) Fixed to openings /wooden frames with rawl plugs screws etc.
5415
-
126.4
... More
Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size)
426
-
162.4
... More
Providing and fixing bright finished brass door latch with necessary screws etc. complete :
-
-
-
... More
300 x 16 x 5 mm
104
-
280.5
... More
250 x 16 x 5 mm
38
-
266.8
... More
Providing and fixing bright finished brass towerbolts (barrel type) with necessary screws etc. complete :
-
-
-
... More
(i) 250 x 10 mm
104
-
389.3
... More
(ii) 200 x 10 mm
38
-
309.9
... More
Providing and fixing bright finished brass handles with screws etc. complete :
-
-
-
... More
(i) 125 mm
104
-
215
... More
(ii) 100 mm
38
-
201.3
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
113
-
111.6
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality)
33
-
788.2
... More
Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws.
100
-
468.8
... More
Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter).
30.24
-
3094.4
... More
Providing 50 × 50 × 50 mm Gamair wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) and making good the walls etc.
102
-
20.7
... More
SUB-HEAD : STEEL WORK
-
-
-
... More
Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required.
7854.55
-
91.2
... More
Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.
154
-
146.2
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required.
31.68
-
5836
... More
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-
-
-
-
... More
(i) In stringers, treads, landing etc. of stair cases including use of chequered plate wherever required, all complete.
100
-
95.4
... More
(ii) In grating, frames, guard bar, railing, brackets, gates and similar works, all complete.
1888.1
-
113.8
... More
Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:-
-
-
-
... More
(i) M.S. tube
967.36
-
121.4
... More
Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design.
25
-
76.5
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1611.15
-
532.7
... More
SUB-HEAD : ALUMINIUM WORK & STRUCTURAL GLAZING
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-
-
-
-
... More
(i) For fixed portion of approved quality:- - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
1320.75
-
400.2
... More
(ii) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
1704.18
-
471.6
... More
Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-
-
-
-
... More
(i) With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )
13.88
-
1058.2
... More
(ii) With float glass panes of 5.5 mm thickness ( weight not less than 13.50 kg / sqm )
219.74
-
1285.2
... More
Providing and fixing stainless steel ( SS 304 grade ) adjustable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-in-charge:-
-
-
-
... More
(i) 205 x 19 mm
142
-
276
... More
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved quality complete as per direction of Engineer-in-charge:-
-
-
-
... More
(i) Anodised aluminium of grade AC 15.
106
-
79.9
... More
Providing and fixing 100 mm brass locks (best make of approved quality) with 6 levers without pair of handles for aluminium doors including necessary cutting and making good etc. complete as per direction of Engineer-in-charge.
7
-
472.4
... More
SUB-HEAD : FLOORING AND SKIRTING WORK
-
-
-
... More
Providing and fixing Kota stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishing complete.
-
-
-
... More
(i) Kota stone slab 25mm thick
81.9
-
1551.9
... More
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1 : 3 ( 1 cement : 3 fine sand ) and joined with ordinary cement slurry mixed with pigment to match the shade of slabs, including rubbing and polishing complete.
14.06
-
1642.9
... More
Providing and fixing 25 mm thick pre-polished colored concrete designer tiles making by strong vibratory compaction technology using 50% white cement and 50% ordinary cement of size 300mm x 300mm, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete as per direction of the Engineer-in-charge.
266.88
-
870.6
... More
Providing and fixing Marble stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade, including rubbing and polishing complete.
-
-
-
... More
(i) 18mm thick Marble Stone - Rajnagar plain marble
129.42
-
1900.1
... More
Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 fine sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete.
-
-
-
... More
(i) 8mm thick Rajnagar marble tiles (polished)
57.49
-
1006.6
... More
Extra for prefinished nosing to treads of steps of marble stone.
214.18
-
353.5
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
... More
(i) Double charged Stainfree vitrified tiles - Size of tile 60x60 cm
975.06
-
1118.2
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622 - 2017, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete
-
-
-
... More
(i) Double charged Stainfree vitrified tiles - Size of tile 60x60 cm
171.06
-
1178.5
... More
Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete.
-
-
-
... More
(i) Mat Finish Tiles - Ceramic Tiles 1st quality 400 x 400mm in all shades and designs
256.81
-
804.1
... More
(ii) Anti-Skid Tiles - Ceramic Tiles 1st quality 400 x 400mm in all shades and designs
105.93
-
870.9
... More
Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
540.72
-
792
... More
Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-in-Charge.
83.04
-
573.6
... More
Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete.
-
-
-
... More
(i) 40 mm thick
65
-
526.4
... More
60 mm thick facotry made c.c. interlocking paver block of M-35 Grade Providing and laying factory made coloured chamfered edge cement concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per specifications & approval/ direction of Engineer-in-Charge.
-
-
-
... More
(i) 60 mmthick c.c paver block of M-35 grade with approved colour, design and pattern.
542.82
-
1113.9
... More
SUB-HEAD : ROOFING AND CEILING WORK
-
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
-
-
-
... More
(i) Single socketed pipe - 110 mm OD
355
-
268.5
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type-A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
-
-
-
... More
(i) Coupler - 110mm
65
-
123.6
... More
(ii) Single equal tee with door - 110 x 110 x 110 mm
35
-
231.2
... More
(iii) Single equal tee without door - 110 x 110 x 110 mm
35
-
224.4
... More
(iv) Bend 87.5 - 110mm
45
-
140.9
... More
(v) Plain shoe - 110 mm
45
-
118
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.
-
-
-
... More
(i) 110mm
310
-
190.5
... More
Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete.
-
-
-
... More
(i) 100mm
45
-
97.2
... More
SUB-HEAD : FINISHING WORK
-
-
-
... More
12 mm cement plaster of mix
-
-
-
... More
(i) In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
2328.56
-
174.8
... More
(ii) In cement mortar 1 : 6 ( 1 cement : 6 fine sand )
4051.34
-
159.6
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:
-
-
-
... More
(i) Cement mortar 1:6 (1 cement : 6 fine sand)
4156.66
-
185.3
... More
6 mm cement plaster of mix:
-
-
-
... More
(i) In cement mortar 1 : 3 ( 1 cement : 3 fine sand )
2154.69
-
144.5
... More
Neat cement punning.
2948.56
-
45.1
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
-
-
-
... More
(i) New work ( two or more coats) over and including water thinnable priming coat with cement primer.
6901.29
-
95.7
... More
Finishing walls with premium acrylic smooth exterior paint with Silicon additives of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
-
-
-
... More
(i) New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
4868.88
-
119.3
... More
Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
-
-
-
... More
(i) With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ).
348.57
-
37.9
... More
(ii) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
375.68
-
31.7
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]:
-
-
-
... More
(i) Two or more coats on new work
957.9
-
82.8
... More
SUB-HEAD:WATER PROOFING WORK
-
-
-
... More
Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with :
-
-
-
... More
(i) Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
42.25
-
10554.1
... More
(ii) Cement mortar 1:4 (1cement : 4 fine sand)
11.29
-
8274.1
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound, as directed by Engineer-in-Charge and consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
82.7
-
335.1
... More
SUB-HEAD : SANITARY WORKS
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
... More
(i) White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.
7
-
4634.9
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
... More
(i) W.C. pan with ISI marked white solid plastic seat and lid
17
-
4398.3
... More
Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
... More
(i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
20
-
3771.1
... More
Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.
11
-
2366.2
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:
-
-
-
... More
(i) Flat back wash basin of size 550x400mm.
35
-
1139.9
... More
Providing and fixing kitchen sink including making all connections excluding cost of fittings.
-
-
-
... More
(i) White glazed fire clay sink of size 600x450x250mm.
7
-
2103.8
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
(i) Semi rigid pipe - 32 mm dia
39
-
87
... More
(ii) Flexible pipe - 32 mm dia
39
-
93.9
... More
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
31
-
834.1
... More
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
31
-
485
... More
Providing and fixing toilet paper holder :
(i) C.P. brass
21
-
436.2
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.
-
-
-
... More
(i) 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms.
27
-
413.1
... More
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms.
34
-
222.4
... More
Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms.
27
-
261.8
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (working pressure 6 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
-
-
-
... More
(i) Single socketed pipe - 110 mm OD
320
-
321.2
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water, soil, waste & vent pipes pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
-
-
-
... More
(i) Coupler - 110mm
80
-
123.6
... More
(ii) Single pushfit Coupler - 110 mm
50
-
114.3
... More
(iii) Single equal tee with door - 110 x 110 x 110 mm
50
-
231.2
... More
(iv) Single equal tee without door - 110 x 110 x 110 mm
50
-
224.4
... More
(v) Double equal junction of required degree without door - 110x110x110 x110 mm
50
-
204.4
... More
(vi) Double equal junction of required degree with door - 110x110x110 x110 mm
50
-
246.6
... More
(vi) Bend 87.5 - 110mm
50
-
140.9
... More
(vii) Plain shoe - 110 mm
50
-
118
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water, soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.
-
-
-
... More
(i) 110mm
245
-
190.5
... More
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand):
-
-
-
... More
(i) 100 mm dia.
111
-
337.9
... More
SUB-HEAD : WATER SUPPLY
-
-
-
... More
Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. - Internal work - Exposed on wall.
-
-
-
... More
(i) 15 mm dia. nominal bore
132
-
228.8
... More
(ii) 20 mm dia. nominal bore
120
-
281.6
... More
(iii) 25 mm dia. nominal bore
108
-
369.6
... More
(iv) 40 mm dia. nominal bore
114
-
542.3
... More
(iv) 50 mm dia. nominal bore
66
-
669.1
... More
Providing and fixing G.I pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including making good the walls/floor etc. concealed pipe including painting two coats or more with anticorrosive bitumastic paint, cutting chases and making good the same complete as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
(i) 15 mm dia. nominal bore
108
-
421.5
... More
(ii) 20 mm dia. nominal bore
96
-
484.2
... More
Making connection of G.I. distribution branch with G.I. main following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete as per CPWD specification and direction of the Engineer - in - charge.
-
-
-
... More
(i) 25 to 40 mm nominal bore
65
-
437.5
... More
Providing and fixing brass bib cock of approved quality :
-
-
-
... More
(i) 15 mm nominal bore
54
-
299.2
... More
Providing and fixing brass stop cock of approved quality :
-
-
-
... More
(i) 15 mm dia nominal bore
84
-
299.2
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
... More
(i) 25 mm nominal bore
24
-
512.2
... More
(ii) 40 mm nominal bore
14
-
695.9
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end):
-
-
-
... More
(i) 25 mm nominal bore - Vertical
24
-
508
... More
(ii) 40 mm nominal bore - Vertical
14
-
988.2
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
14000
-
10
... More
Constructing masonry Chamber 30x30x50 cm, inside , in brick work in cement mortar 1:4 (1 cement :4 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
(i) With Second Class bricks
16
-
2172.4
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
-
-
-
... More
(i) 15 mm diameter pipe.
132
-
9.4
... More
(ii) 20 mm diameter pipe.
120
-
10.7
... More
(iii) 25 mm diameter pipe.
108
-
14.2
... More
(iv) 40 mm diameter pipe.
114
-
21.2
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
... More
(i) 15 mm diameter pipe
132
-
6.8
... More
(ii) 20 mm diameter pipe
120
-
8
... More
(iii) 25 mm diameter pipe
108
-
9.9
... More
(iv) 40 mm diameter pipe
114
-
13.9
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :
-
-
-
... More
(i) 15 mm nominal bore.
105
-
396.2
... More
(ii) 20 mm nominal bore.
66
-
410
... More
(iii) 25 mm nominal bore.
30
-
465.1
... More
(iv) 40 mm nominal bore.
30
-
589.1
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:
-
-
-
... More
(i) 100 mm diameter
24
-
111.3
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.
38
-
122.5
... More
SUB HEAD : SEWAGE AND DRAINAGE WORKS
-
-
-
... More
Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete :
-
-
-
... More
(i) 150 mm diameter
80
-
417.1
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design:
-
-
-
... More
(ii) 150 mm diameter S.W, pipe
80
-
1575.5
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
3
-
60699.8
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
... More
(i) Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
12
-
8492.8
... More
Extra for depth beyond 450 mm of brick masonry chamber for underground C.I. inspection chamber with same specification as mentioned in item no 20.330 complete as per standard design :
-
-
-
... More
(i) For 500x700 mm size
6
-
7319.4
... More
SUB HEAD : MISCELLANEOUS WORK
-
-
-
... More
Supplying and installation of 2 H.P Mono block Pump 50 x 40 mm Suction and delivery pipe complete fabricated to C:0 base .of standard size with holding down bolt with panel board, single phase connection motor and starter to main switch, indicator and earthening etc complete as per direction of the Engineer-ln-Charge (NO additional cost for electrification upto main switch will be paid seperately). Measurement to be taken after successful operation of the Pump.
3
-
23652
... More
SUB HEAD : INTERNAL ELECTRIFICATION WORK
-
-
-
... More
Wiring for light/ fan/ exhaust fan/ call bell point with 2x1.5 sq. mm PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall complete with 6/10 amps modular type switch, cover plate, GI box including necessary connection etc. as required.
540
-
955
... More
Wiring for 2 way controlling light point with 3x1.5 sq. mm PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall complete with 6/10 amps modular type 2 way switch, cover plate, GI box including necessary connection etc. as required.
6
-
1324
... More
Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2 x 1.5 sq. mm PVC insulated Copper conductor cable (FR) on modular concealed switch board with cover plate earthing the 3rd pin etc. as required.
246
-
412
... More
Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2 x 2.5 sq. mm PVC insulated Copper conductor cable (FR) on modular concealed switch board with cover plate earthing the 3rd pin etc. as required.
146
-
556
... More
Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:-
-
-
-
... More
(i) 2 X 1.5 + 1 X 1.5 sq mm
1460
-
98
... More
(ii) 2 X 2.5 + 1 X 1.5 sq mm
2000
-
118
... More
(iii) 2 X 4 + 1 X 1.5 sq mm
1010
-
166
... More
(iv) 4 X 4 + 2 X 1.5 sq mm
120
-
268
... More
(v) 4 X 6 + 2 X 2.5 sq mm
75
-
365
... More
Supplying and fixing of the following modular accessories including necessary connection etc. as required.
-
-
-
... More
(i) RJ45 LAN socket outlet (1M):-
42
-
396
... More
(ii) TV socket outlet (1M):-
7
-
118
... More
(iii) Blank plate (1M):-
200
-
32
... More
(iv) Louvers/opaque type LED foot lamp (4M):-
36
-
553
... More
(v) RJ11 telephone socket outlet (1M):-
42
-
118
... More
(vi) 20/25 amps single phase motor starter switch (2M):-
37
-
401
... More
Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked, BEE 1 star/minimum service value 4.0 m3/min/W) : -
58
-
2234
... More
Supplying and fixing of the following electrical accessories including necessary connection etc. as required.
-
-
-
... More
(i) Electronic 5 step fan regulator
58
-
322
... More
Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required:-
7
-
1790
... More
Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:-
24
-
1617
... More
Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:-
47
-
359
... More
Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required:
47
-
240
... More
Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-
-
-
-
... More
(i) Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp):-
62
-
602
... More
(ii) Surface mounted round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:-
37
-
1305
... More
Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-
-
-
-
... More
(i) 18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):-
62
-
816
... More
(ii) 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-
35
-
158
... More
(iii) 20 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-
74
-
429
... More
Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-
-
-
-
... More
(i) 36 watt LED street light fixture with integral driver and secondary lens (IP 66):-
14
-
5452
... More
(ii) 40 watt LED post top light fixture with integral driver and high quality polycarbonate diffuser (IP 65):-
2
-
10269
... More
Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:-
-
-
-
... More
(i) 40 mm dia
28
-
589
... More
Supplying and fixing of the following electrical accessories including necessary connection etc. as required.
-
-
-
... More
(i) Musical call bell
7
-
250
... More
(ii) 3mm thick bakelite sheet
7000
-
2
... More
Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.
-
-
-
... More
(i) 8 way horizontal TPN MCB DB (Double door):-
7
-
5047
... More
(ii) 4 way SPN MCB DB (double door):-
3
-
1426
... More
(iii) 2 way SPN MCB DB (single door):-
9
-
597
... More
Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:-
-
-
-
... More
(i) 6 to 32 amps SP MCB:-
182
-
218
... More
(ii) 6 to 32 amps DP MCB:-
3
-
664
... More
(iii) 40/50/63 amps FP MCB:-
3
-
2055
... More
(iv) 6 to 32 amps FP MCB:-
7
-
1441
... More
Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12"x 12" having locking arrangement including CC work, holes on earth pipe etc. as required.
6
-
3829
... More
Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required.
6
-
780
... More
Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required.
60
-
24
... More
Supplying and fixing of the following sizes wooden switch boards with 3mm thick bakelite cover etc. as required.
-
-
-
... More
(i) 300mm x 380mm (12" X 15") :-
7
-
199
... More
Supplying & fixing of 12mm thick marine plywood conforming to IS:710 with necessary painting etc as required:-
0.54
-
1069
... More
Supplying and fixing of following vertical storage water heater 5 star catagory complete with 15 amps top, connection pipes including necessary connection etc as required.
-
-
-
... More
(i) 15 litre storage capacity:-
17
-
11658
... More
Suppiying & fixing of UTP- 4 Pair Cat- 6E LAN Cable in existing PVC conduit i/c necessary connection etc as required.
850
-
29
... More
Supplying & installation of Surge Protection Device (SPD) of following ratings in the existing Panels/MCB DBs including necessay connections etc as required:-
-
-
-
... More
(i) Surge Protection Device (SPD, withdrawable) (Type-2) with Imax 15 KA (3P+N) :-
3
-
6657
... More
(ii) Catridge for Surge Protection Device (SPD) (Type-2) with Imax 15 KA (3P+N) :-
3
-
2223
... More
Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:-
-
-
-
... More
(i) 32 amps 415 volts four strip Copper busbar chamber 4 ways of size (300mmx240mmx80mm):-
3
-
1996
... More
Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required
-
-
-
... More
(i) 2 core 4 Sq mm
550
-
94
... More
Excavation of earth for cable trench of 800mm depth & 300mm width in all kinds of soil including back filling of cable trench with the excavated soil with 20cm layer of sand, 3.5 nos bricks per metre for protection including ramming, consolidating to the original shape as per dirrection of Site Engineer
520
-
150
... More
Drawing of armoured/un-armoured cable with proper saddling etc as required
30
-
23
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements