Public Works Department Tender

Patch repairing/ Maintenance of bituminous surface road using jhamma brick aggregate & Vioscocity graded bitumen (VG-30) Repairing pot holes and making up small depressions with ramming or power rolling after removal/ Disposal of disintegrated materials within a lead of 50m, cutting potholes to regular shapes with vertical edges and levelling the bottom, cleaning the same with compressed air or any appropriate method including screening, cleaning of aggregates; filling up with hama chips using bitumen of VG-30 Grade @ 54 Kg per m3 of loose volume of Jhama brick chips, after applying tack coat of bitumen on sides and and bottom @0.75 Kg/Sqm and finishing the top of repaired surface levelled with adjoining area in proper grade and camber including spreading of sand @ 0.006 cum/sqm of prepared road surface as per direction of the Engineer-in-charge and all as per MoRD technical specification Clauses 1900, 502, 503 and 504.

Brick Soling Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412

WBM Grading - 3 Providing, laying, spreading and compacting 53 mm to 0.075 mm jhama brick aggregates to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MoRD Technical Specification Clause 405. A) By Manual Means.