Public Works Department Tender
... More
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Costs
EMD
₹ 3,70,226Document Cost
₹ 8,000Tender Fee
Refer Documents
Summary
Construction Of Innovative Water Tank Project Based On Existing Cherra At Budhi Chandra Para Under Deo Rf Vc Within The Jurisdiction Of Manu R.d Block Under Dws Sub-division, Manu (phase-ii)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CEDWS_59154_1Tender No
13/CE/PWD(DWS)/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.tripura.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Sedimentation tank (20,000 Gallon Capacity)
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds os soil.
63.79
179
11475
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete
4.53
1177
5333
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-All work upto plinth level:
1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size)
4.71
9295
43783
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
12.5
14075
175945
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
5.95
15780
93896
... More
Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth an d skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
13.71
15502
212535
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
a) Foundations, footings, bases for columns etc. for mass concrete with timber plank
7.83
333
2614
... More
b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
134.34
496
66646
... More
c) Suspended floors, roofs, landings, balconies and access platform with timber planks
4.2
577
2424
... More
d) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank
13.31
391
5204
... More
A) Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level.all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
1884
103
195748
... More
B) Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
4020
103
417678
... More
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).
4.1
1572
6437
... More
6 mm cement plaster of mix In cement mortar 1:3 ( 1 cement : 3 fine sand ).
197.22
185
36624
... More
Neat cement punning.(Quantity same as item no- 11)
197.22
56
11202
... More
Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
50.83
94
4824
... More
Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as
required:
478.69
173
82813
... More
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-In grating, frames, guard bar, railing, brackets, gates and similar works, all complete.
120
142
17076
... More
Providing and laying S&S centrifugally cast(spun) Ductile iron Class K-7 pipes conforming to IS:8329 as per CPWD specification and direction of the Engineer-In-Charge. ii) 150 mm dia Ducctile Iron K-7 pipes
18
2602
46836
... More
Providing and fixing C.I. sluice valves ( with cap ) completewith bolts, nuts, rubber insertions etc. ( the tail pieces if
required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
i. 150 mm dia. A) PN- 1.6
1
8238
8239
... More
Charges for cutting D.I. pipe with steel saw by manual means as per CPWD specification and direction of the Engineer - in - charge.
ii) 150 mm dia
5
185
926
... More
Providing and fixing DI specials as per CPWD specification and direction of the Engineer-In-Charge.
A. D.I. all socketted Bend 90 degree
ii. 150 mm dia
2
3495
6990
... More
J. D.I flanged socketted tail piece.
i. 150 mm dia
2
2617
5234
... More
K. D.I flanged spigotted tail piece.
i. 150 mm dia
2
3593
7186
... More
Constructing masonry Chamber 90 x 90 x 100 cm, inside with 75 class designationbrick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 190 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 coarse sand
) 12 mm thick finished with a floating coat of neat cement complete as per standard design
A). With Second class bricks
1
20432
20433
... More
Extra for Providing and mixing water proofing material in cement concrete work in doses by weight of cement manufacturer's specification
401.14
77
31168
... More
Construction of HRF / SSF (5000 litre/hr)
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil
129.42
179
23283
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
All kinds of soil
86.28
161
13917
... More
Supplying and filling in plinth, under floor, foundations etc. With sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
10.68
1177
12574
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering: All work upto plinth level: 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size)
20.43
9295
189911
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification
958
77
74437
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
21.35
14075
300514
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-
1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
36.75
15502
569706
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-
i) 1:1:2 ( 1 Cement: 1fine sand : 2 graded stone aggregate 20 mm nominal size)
1.49
15780
23514
... More
Reinforcement for R.C.C. work including straightening,cutting, bending,placing in position and binding all complete above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
8938.5
103
928710
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
i) Foundations, footings, bases for columns etc. for mass concrete with steel formwork
12.32
401
4943
... More
ii) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
347.71
496
172499
... More
iii) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
13.82
729
10082
... More
12 mm cement plaster of mix
396.3
224
88850
... More
Neat cement punning.
396.3
56
22510
... More
First class brick work in foundation and plinth including cost of all materials as required complete:-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
0.58
9845
5710
... More
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-
In grating, frames, guard bar, railing, brackets, gates and similar works, all complete.
187.96
142
26747
... More
Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required
G.I.pipes.
3650
173
631450
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 find : 6 graded well burnt brick aggregate 200 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
81.76
894
73118
... More
Providing and fixing G.I. Full way valve as per CPWD specification and direction of the Engineer - in - charge.
ix. 100mm dia
3
743
2231
... More
Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
ii. 100mm dia
A. PN-1.6
12
5561
66733
... More
Providing and fixing G.I. pipes of medium class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. A. External work. i) 100 mm dia nominal bore
12
1466
17597
... More
Providing and fixing G.I. equal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
ix. 100 x 100 x 100 mm dia
2
1225
2450
... More
Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required.
250
109
27400
... More
Providing, fixing and laying ASTM-D 1785 PVC pipe SCH-80 in the filter bed includin testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
100 mm dia
132
1431
189006
... More
Labour charge for making 10 mm dia perforation in 90/110/140 mm dia UPC/ASTM pipes in staggeed manner @ 20 nos nos/ meter as per direction of Engineer-in-charge.
132
78
10378
... More
Providing and fixing of UPVC end cap suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge. 100 mm dia
20
560
11208
... More
Providing, fixing and laying fabricated UPVC equal tee conforming to IS : 10124 ( Part 5 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
vi. 110 x 110 mm dia
25
580
14510
... More
Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. A. Class - 3 ( working pressure 6.0 kg / cm2)
ii. 110 mm OD
6
372
2233
... More
2.3.Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
ii. 110 mm dia
1
174
175
... More
Providing and fixing G.I. Unequal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
xxv. 100 x 100 x 40 mm dia
1
1130
1131
... More
Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
v. 40 mm dia
1
343
343
... More
Providing and placing filter sand(local quarry) in/c. washing the bed etc. complete as per direction of Engineer - in - charge.
30
2108
63240
... More
Providing and placing filter gravel having effective size of 3.00 mm to 25 mm and uniformity co-efficient of not more than 1.70 and or less than 1.30 obtained from Barakar river, west bengal as per specification and the direction of engineer-in-charge.
47.5
28038
1331819
... More
Clear Water Reservoir(10,000 Gallon)
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-All kinds of soil
51.66
179
9294
... More
Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-All kinds of soil
2.13.1) By manual means
83.11
231
19249
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
5.54
1177
6523
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-All work upto plinth level:
4.1.14) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size)
5.63
9295
52344
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
12.54
14075
176494
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
8.28
15502
128358
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring,shuttering, finishing and reinforcement- 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
11.15
15780
175910
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
Foundations, footings, bases for columns etc. for mass concrete with timber plank
9.29
333
3103
... More
Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
38.47
729
28060
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
85.27
496
42301
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
42.73
499
21339
... More
A) Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level.all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
1880.88
103
195423
... More
B) Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
2913.93
103
302757
... More
First class brick work in foundation and plinth including cost of all materials as required complete:-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
0.25
9845
2491
... More
12 mm cement plaster of mix
Cement mortar 1 : 4 ( 1 cement : 4 fine sand )
31.65
224
7096
... More
6 mm cement plaster of mix :
Cement mortar 1 : 3 ( 1 cement : 3 fine sand )
218.98
185
40664
... More
Neat cement punning
78.03
56
4432
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work
63.78
106
6818
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
All kinds of soil
27.7
161
4469
... More
Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge.
100 mm dia Ductile Iron Class K-7 pipes.
12
1861
22333
... More
Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per CPWD specification and direction of the Engineer - in - charge.
i)100 mm dia
5
93
469
... More
Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
i) 100 mm dia
PN-1.6
2
5561
11122
... More
Providing & installation and commissioning of 5000 GPH capacity 220 mtr head water lubricated submerssible pump with 3Ph, 415 V AC 30.00 HP motor with star delta connection upto the depth of 10 ft by 50 mm dia GI column pipe (conforming to IS:1239 medium class) with tailpiece welded with 10 mm thick GI flange in/c providing fitting fixing by necessary rubber washer, nuts & bolts, MS safety clamp etc. as per required size and making necessary electrical connection with main switch/starter with motor in/c commissioning & trial run as per direction of the Engineer-in-charge (Excluding the cost of Electrical Flat for submerssible pump)
1
110448
110448
... More
Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge
1
9372
9372
... More
Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. vii. 10 sqmm
100
269
26960
... More
Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge
1
1135
1135
... More
Providing and fitting fixing of moving iron type, Range 0-100/0200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge
1
1964
1965
... More
Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.
ii. 35 HP/26 kw Relay range within 20-32 + 10%
1
27556
27556
... More
Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge
iii. 100 amps
1
10274
10275
... More
Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) ( 12 mm dia perforation ) , laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge.
ii. for 3-phase connection with 4.00 mtr. Long G.I. pipe
1
23655
23656
... More
Providing and installation of necessary arrangements of disinfection of clear water by chlorination through metering pump in/c all necessary equipment complete as per specifications and direction of the Engineer-in-charge (1 no. Metering pump with motor 0.30 to 30 lph capacity of Swellore/ Milton Ray/ TosconJesco make, 1 no. 50 ltr. capacity SS solution tank of 5mm shell thickness with 6mm bottom plate, 1 no. DOL Motor Starter of L&T/ BCH make 3phase, 50Hz, 415 volt, 10 mtr. PP-R pipe PN-16, 50 mm dia NB, 4kg of Sodium Hypochlorite solution etc. complete will be supplied by the agency at his own cost & risk).
1
65060
65061
... More
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-
In cement mortar 1:3 ( 1 cement : 3 fine sand ).
31.65
1572
49754
... More
Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
31.65
94
3004
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved
steel primer etc. complete as required:-
Using M.S. angels 40x40x6 mm for diagonal braces
Door & Windows
4.68
4711
22051
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
11.1.2) 0.63mm thick with zinc coating not less than 275gm/m2
16
1205
19286
... More
Finishing walls with water proofing cement paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
New work ( two or more coats applied @ 3.84 kg/10 sqm)
132.01
78
10336
... More
Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : 12.30.1) New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm
132.01
160
21240
... More
Providing and fixing G.I. pipes of medium class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. A) External work. ix) 100 mm dia. Nominal bore
12
1466
17597
... More
Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
100 mm dia.
1
2147
2148
... More
Providing & fitting fixing of MS flange ( 8 mm wall thickness ) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge.
100 mm dia
2
420
841
... More
8.46 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. 8.46.2) Fixed to openings /wooden frames with rawl plugs screws etc.
30
169
5091
... More
Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. all complete as per direction of Engineer-in-charge.
40 mm thick with 20 mm well burnt brick aggregate
9
597
5377
... More
Providing and laying cement plaster skirting upto 300 mm height with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) finished with a floating coat of neat cement including rounding of junctions etc. complete
10.13.1) 18 mm thick
5.22
453
2368
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
9.12.1) Hot finished welded type tubes
Truss 50 mm dia
174.27
146
25478
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification
300
77
23310
... More
Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 190 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
A). With Second Class bricks
1
20432
20433
... More
Clear Water Reservoir (20,000 Gallon Capacity)
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds os soil
64.15
179
11541
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to
required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable
method complete.
4.58
1177
5386
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-All work upto plinth level: 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size)
12.5
9295
116196
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
12.5
14075
175945
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement.
1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
6.32
15780
99735
... More
Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth an d skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
13.71
15502
212535
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
a) Foundations, footings, bases for columns etc. for mass concrete with timber plank
7.83
333
2614
... More
b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
134.34
496
66646
... More
c) Suspended floors, roofs, landings, balconies and access platform with timber planks
32.06
577
18502
... More
d) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank
13.31
391
5204
... More
A) Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level.all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
1884
103
195748
... More
B) Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
3144
103
326662
... More
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).
4.1
1533
6280
... More
6 mm cement plaster of mix Cement mortar 1:3 ( 1 cement : 3 fine sand ).
456.29
185
84733
... More
Neat cement punning.
456.29
56
25917
... More
Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:
478.69
173
82813
... More
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-In grating, frames, guard bar, railing, brackets, gates and similar works, all complete.
120
142
17076
... More
Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design.
9.48
103
985
... More
Providing structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required.
50
107
5360
... More
Providing and laying S&S centrifugally cast(spun) Ductile iron Class K-7 pipes conforming to IS:8329 as per CPWD specification and direction of the Engineer-In-Charge. ii) 150 mm dia Ducctile Iron K-7 pipes
18
2602
46836
... More
Providing and fixing C.I. sluice valves ( with cap ) completewith bolts, nuts, rubber insertions etc. ( the tail pieces if
required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
i. 150 mm dia. A) PN- 1.6
1
8238
8239
... More
Charges for cutting D.I. pipe with steel saw by manual means as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
i) 150mm dia
5
185
926
... More
Constructing masonry Chamber 90 x 90 x 100 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand : 4 brick aggregate 1st class 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 brick aggregate 1st class 40 mm nominal size) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer- in - charge.
A). With First class bricks
1
20432
20433
... More
Extra for Providing and mixing water proofing material in cement concrete work in doses by weight of cement manufacturer's specification
300
77
23310
... More
12 mm cement plaster of mix a) In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
12
224
2690
... More
Providing & installation and commissioning of 5000 GPH capacity 220 mtr head water lubricated submerssible pump with 3Ph, 415 V AC 30.00 HP motor with star delta connection upto the depth of 10 ft by 50 mm dia GI column pipe (conforming to IS:1239 medium class) with tailpiece welded with 10 mm thick GI flange in/c providing fitting fixing by necessary rubber washer, nuts & bolts, MS safety clamp etc. as per required size and making necessary electrical connection with main switch/starter with motor in/c commissioning & trial run as per direction of the Engineer-in-charge (Excluding the cost of Electrical Flat for submerssible pump)
1
110448
110448
... More
Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge
1
9372
9372
... More
Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. vii. 10 sqmm
100
269
26960
... More
Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge
1
1135
1135
... More
Providing and fitting fixing of moving iron type, Range 0-100/0200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge
1
1964
1965
... More
Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.
ii. 35 HP/26 kw Relay range within 20-32 + 10%
1
27556
27556
... More
Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge
iii. 100 amps
1
10274
10275
... More
Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) ( 12 mm dia perforation ) , laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge.
ii. for 3-phase connection with 4.00 mtr. Long G.I. pipe
1
23655
23656
... More
Clear Water Reservoir(10,000 Gallon)
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-All kinds of soil
51.66
179
9294
... More
Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-All kinds of soil
2.13.1) By manual means
83.11
231
19249
... More
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
5.54
1177
6523
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-All work upto plinth level:
4.1.14) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size)
5.63
9295
52344
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
-All work upto plinth level:
1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
12.54
14075
176494
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
8.28
15502
128358
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring,shuttering, finishing and reinforcement- 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size)
11.15
15780
175910
... More
Centering shuttering including struttings, propping etc. and removal of form work for:
Foundations, footings, bases for columns etc. for mass concrete with timber plank
9.29
333
3103
... More
Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
38.47
729
28060
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
85.27
496
42301
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
42.73
499
21339
... More
A) Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level.all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
1880.88
103
195423
... More
B) Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
2913.93
103
302757
... More
First class brick work in foundation and plinth including cost of all materials as required complete:-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
0.25
9845
2491
... More
12 mm cement plaster of mix
In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
31.65
224
7096
... More
6 mm cement plaster of mix :
In cement mortar 1 : 3 ( 1 cement : 3 fine sand )
218.98
185
40664
... More
neat cement punning
78.03
56
4432
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work
63.78
106
6818
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
All kinds of soil
27.7
161
4469
... More
Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge.
100 mm dia Ductile Iron Class K-7 pipes.
12
1861
22333
... More
Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
100 mm dia
5
93
469
... More
Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
100 mm dia
PN-1.6
2
5561
11122
... More
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-
In cement mortar 1:3 ( 1 cement : 3 fine sand ).
31.65
1572
49754
... More
Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
31.65
94
3004
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved
steel primer etc. complete as required:-
Using M.S. angels 40x40x6 mm for diagonal braces
Door & Windows
4.68
4711
22051
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
11.1.2) 0.63mm thick with zinc coating not less than 275gm/m2
16
1205
19286
... More
Finishing walls with water proofing cement paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
New work ( two or more coats applied @ 3.84 kg/10 sqm)
132
78
10336
... More
Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : 12.30.1) New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm
132.01
160
21240
... More
Providing and fixing G.I. pipes of medium class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. A) External work. ix) 100 mm dia. Nominal bore
12
1466
17597
... More
Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
100 mm dia.
1
2147
2148
... More
Providing & fitting fixing of MS flange ( 8 mm wall thickness ) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge.
100 mm dia
2
420
841
... More
8.46 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. 8.46.2) Fixed to openings /wooden frames with rawl plugs screws etc.
30
169
5091
... More
Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. all complete as per direction of Engineer-in-charge.
40 mm thick with 20 mm well burnt brick aggregate
9
597
5377
... More
Providing and laying cement plaster skirting upto 300 mm height with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) finished with a floating coat of neat cement including rounding of junctions etc. complete
10.13.1) 18 mm thick
5.22
453
2368
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
9.12.1) Hot finished welded type tubes
Truss 50 mm dia
174.27
146
25478
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification
300
77
23310
... More
Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 190 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
A). With Second Class bricks
1
20432
20433
... More
Providing and Laying of CI/DI/GI pipe
-
-
-
... More
Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm (slope-1 in 200)including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge. A. For UPVC pipes in new work a). In all kinds of soil
i. For pipes not exceeding 90 mm dia
1000
87
87600
... More
i.For pipes exceeding 90 mm dia but not exceeding 300 mm dia
900
106
95760
... More
B.For G.I. /C.l./ D.I. pipes in new work
. In all kinds of soil
ii. For pipes exceeding 90 mm dia but not exceeding 300 mm dia
600
133
80280
... More
i. For pipes not exceeding 90 mm dia
400
100
40160
... More
Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS :10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
A) Class - 3 ( working pressure 6.0 kg / cm2)
ii). 90 mm OD
800
271
217120
... More
iii). 110 mm OD
500
372
186050
... More
i). 40 mm.
100
89
8980
... More
ii). 50 mm.
100
112
11280
... More
iv). 140 mm OD
400
612
245120
... More
Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge
v). 90 mm dia
16
298
4779
... More
vi). 110 mm dia
10
356
3564
... More
i. 40mm dia
4
161
644
... More
ii. 50 mm dia
4
190
760
... More
vii. 140 mm dia
10
466
4668
... More
Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
v) 90 mm dia
10
148
1487
... More
i. 40 mmdia
4
96
384
... More
i. 50mmdia
4
102
408
... More
vi. 110 mm dia
4
174
698
... More
vii. 140 mm dia
4
250
1002
... More
Providing, fixing and laying fabricated UPVC equal tee conforming to IS : 10124 ( Part 5 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge
v) 90 x 90 mm dia
8
352
2818
... More
i. 40x40mmdia No.
4
232
928
... More
ii. 50x50mmdia No.
4
262
1050
... More
vi. 110 x 110 mm dia
4
580
2322
... More
vii. 140 x 140 mm dia
4
818
3272
... More
Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS :8329 as per CPWD specification and direction of the Engineer - in - charge.
iii. 125 mm dia Ductile Iron Class K-7 pipes.
200
2278
455600
... More
i 80 mm dia Ductile Iron Class K-7 pipes.
400
1827
731040
... More
ii. 100 mm dia Ductile Iron Class K-7 pipes.
300
1861
558330
... More
iv. 150 mm dia Ductile Iron Class K-7 pipe
100
2602
260200
... More
Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per CPWD specification and direction of the Engineer - in - charge.
ii.100 mm dia
109
93
10213
... More
i. 80 mm dia
145
81
11847
... More
iii.125 mm dia
73
98
7169
... More
iv.150 mm dia
36
144
5202
... More
Providing and fixing DI specials as per CPWD specification and direction ofthe Engineer -in-charge.
A. D.I. all socketted Bend 90 degree
i. 100 mm dia
4
2167
8669
... More
i. 80 mm dia
4
1765
7061
... More
i. 150 mm dia
4
3495
13980
... More
B.D.I. all socketted Bend 45 degree
ii.100 mm dia
4
2080
8323
... More
i. 80 mm dia
4
1482
5929
... More
iii. 125 mm dia
4
3195
12782
... More
iv. 150 mm dia
4
3418
13674
... More
F.D.I. al socketted tee
i. 80x80x80 mm dia
4
2376
9506
... More
iii. 100 x 100 x 100 mm dia
4
2963
11853
... More
V. 150 x150 x100 mm dia
4
4326
17305
... More
vi. 150 x150 x150 mm dia
4
5605
22422
... More
Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in – charge
(i) 80 mm dia. A. PN-1.6
4
4319
17279
... More
(ii) 100 mm dia. A. PN-1.6
4
5561
22244
... More
iii. 125 mm dia A. PN-1.6.
4
6662
26648
... More
vi.150 mm dia.
A. PN-1.6
4
8238
32954
... More
Providing and fixing C.I double action air valve of approved quality with nuts, bolts, rubber insertion complete etc. as per CPWD specification and direction of engineer in charge(the tailpiece, tapper etc. if required will be paid separately.
iii) 100 mm dia.
2
10317
20635
... More
i. 80 mm dia
2
7853
15707
... More
iv. 125 mm dia
2
13151
26302
... More
v. 150 mm dia
2
15015
30032
... More
Providing and fixing C.I non-return valve of approved quality as per chapter 20 of CPWD Specification and direction of the Engineer-in-charge.
iv) 100 mm nominal bore
2
7504
15010
... More
iii. 80 mm nominal bore
2
4200
8402
... More
v. 125 mm nominal bore
2
9367
18736
... More
vi. 150 mm nominal bore
2
11207
22415
... More
Providing and fixing G.I pipe medium class as per IS:1239 with latest amendment complete with G.I fittings including trenching and refilling cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Engineer-in-charge.
A. External works
i. 15mm dia. nominal bore
210
254
53340
... More
v. 40 mm dia. nominal bore
200
549
109820
... More
vi. 50mm dia. nominal bore
200
653
130780
... More
vii. 65 mm dia. nominal bore
200
830
166000
... More
viii. 80 mm dia. nominal bore
200
1021
204380
... More
ix. 100 mm dia. nominal bore
150
1466
219960
... More
x.125 mm dia. nominal bore
120
1648
197760
... More
xi. 150 mm dia. nominal bore
60
1931
115890
... More
Providing and fixing G.I union as per CPWD specification and direction of the engineer-in-charge.
i) 15 mm dia
180
131
23580
... More
v. 40 mm dia
67
387
25936
... More
vi. 50 mm dia
10
490
4905
... More
vii. 65 mm dia
10
816
8165
... More
viii. 80 mm dia
10
962
9628
... More
ix. 100 mm dia
10
1227
12270
... More
Providing and laying of flexible PVC pipe (conforming to IS:7634) complete including earth work as per specification and direction of the Engineer - in - charge (cost of fittings will be paid separately).
i. 15 mm dia
3450
57
197685
... More
i) 25 mm dia
100
74
7470
... More
Providing and fixing G.I socket as per CPWD specification and direction of the engineer-in-charge.
i) 15 mm dia
230
78
18078
... More
v. 40 mm dia
20
133
2672
... More
vi. 50mm dia
20
168
3370
... More
vii. 65 mmdia
20
213
4266
... More
viii. 80mm dia
20
241
4820
... More
ix. 100 mm dia
20
319
6386
... More
x. 125 mm dia
20
404
8098
... More
xi. 150 mm dia
20
506
10122
... More
Providing and fixing of brass ferrule with C.I cover conforming t o IS 2692 in/c boring and tapping the main as per CPWD specification and direction of the engineer-in-charge.
a) 15 mm nominal bore.
115
382
44011
... More
Providing, fixing and laying fabricated UPVC straight reducer conforming to IS : 10124 ( Part 3 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. i. 50x40 mm dia
4
172
688
... More
v. 110x90 mm dia
4
321
1284
... More
vi. 140 x 110 mm dia
4
426
1707
... More
vi. 140x90 mm dia
4
395
1583
... More
Providing & fitting fixing of G.I. flange ( 10 mm wall thickness ) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge.
i. 150 mm dia
20
688
13774
... More
ii. 125 mm dia
40
583
23320
... More
iii. 100 mm dia
50
495
24765
... More
iv. 80 mm dia
67
440
29507
... More
v. 65 mm dia
67
385
25835
... More
vi. 50 mm dia
67
332
22264
... More
Providing and fixing U.P.V.C. service saddle as per CPWD specification and direction of the Engineer - in - charge.
i. 40 mm dia with 15 mm dia opening
4
362
1451
... More
i. 50 mm dia with 15 mm dia opening
4
384
1539
... More
v. 90 mm dia with 15 mm dia opening
27
447
12088
... More
vi. 110mm dia with 15 mm dia opening
40
528
21128
... More
xi. 140 mm dia with 15 mm dia opening
40
589
23588
... More
Providing and fixing G.I. Nipple of medium class as per CPWD specification and direction of the Engineer - in - charge.
i. 15 mm dia 150 mm long
115
68
7889
... More
Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
vii. 40 x15 mm dia
4
169
677
... More
x. 50 x15 mm dia
4
227
908
... More
xiv. 65 x 15 mm dia
15
292
4391
... More
xix. 80 x 15 mm dia
15
397
5958
... More
xxiv. 80x65 mm dia
4
404
1618
... More
xxviii. 100 x 80 mm dia
4
574
2298
... More
xxxiii. 125 x 100 mm dia
4
711
2844
... More
xxxxv. 150 x 100 mm dia
4
828
3312
... More
Providing and fitting fixing PVC /plastic bib cock conforming to IS : 9763 in hydrant points at different location as per specification & direction of the Engineer-in-charge.
i. 15 mm dia PVC /plastic bib cock
115
119
13731
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%