Public Works Department Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Costs
EMD
₹ 15,85,735Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Infrastructure Development Of Ramakrishna Siksha Pratisthan, Kls Unakoti, Tripura Sanctioned Under Ridfxxix Sh Construction Of New Double Storied School Building Portion Including Internal Water Supply, Sanitary Installation, Sewage, Drainage Works.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CEPWD_52011_1Tender No
CE(Buildings)/PWD/ACE/Project Unit/DNIeT/32/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.tripura.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
All kinds of soil
331.12
76687
231.6
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
-
-
-
All kinds of soil
3913.25
631207
161.3
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
14
4740
338.6
Extra for additional lift of 1.5m or part thereof.
-
-
-
All kinds of soil
1300
85930
66.1
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
1543.46
1817115
1177.3
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
Chlorpyriphos/Lindane emulsifiable concentrate of 20%
397.71
89723
225.6
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment as per IS: 6313 (Part III)- Latest revision (excluding the cost of chemical emulsion):
-
-
-
(i) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. - With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
251.55
5760
22.9
(ii) Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling: - With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
1300
165490
127.3
SUB-HEAD : CEMENT CONCRETE WORK
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level:
-
-
-
1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size)
251.44
2504518
9960.7
1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
21.57
228008
10570.6
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
14.58
165566
11355.7
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
Foundations, footings, bases for columns.
32.78
9936
303.1
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification
471.9
36667
77.7
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
150.93
134977
894.3
SUB-HEAD : RCC WORK
-
-
-
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level:
-
-
-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
654.94
7907615
12073.8
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-
-
-
-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
214.55
2854759
13305.8
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-
-
-
-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
634.89
8624663
13584.5
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with
-
-
-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
24.4
328868
13478.2
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more
103086.52
10710689
103.9
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more
124461.07
12931505
103.9
Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits
-
-
-
50 mm thick
56.7
84024
1481.9
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in vertical & horizontal fins, individually or forming box louvers, setting in cement mortar 1:2 (1 cement : 2 coarse sand), including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size).
7.07
100843
14263.5
Centering shuttering including struttings, propping etc. and removal of form work for:
-
-
-
Foundations, footings, bases for columns etc. for mass concrete with timber plank
118.65
39617
333.9
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
663.7
329262
496.1
Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply
2075.43
1514026
729.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply
3140.83
1568531
499.4
Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
1919.48
1200635
625.5
Stairs (excluding landings) except spiral-staircases with wooden plank
133.21
78621
590.2
Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards.
13.2
5762
436.5
Edges of slabs and breaks in floors and walls under 20 cm. wide
635.14
77297
121.7
Weather shade, Chajjas, corbels etc., including edges.
151.86
80683
531.3
Providing and fixing in position 12mm thick bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints.
65.92
45650
692.5
Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour /shade of wall treatment.
-
-
-
Aluminium fluted strips 3.15mm thick : 200 mm wide
29.7
21613
727.7
SUB-HEAD : BRICK WORK
-
-
-
First class brick work in foundation and plinth including cost of all materials as required complete.
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
95.98
944942
9845.2
In cement mortar 1:6 ( 1 cement : 6 fine sand ).
140.43
1336220
9515.2
First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete.
-
-
-
In cement mortar 1:6 ( 1 cement : 6 fine sand ).
232.69
2574668
11064.8
Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
20
26236
1311.8
Half brick masonry with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
915.37
1403720
1533.5
Extra for providing & placing in position 2 nos 6mm dia MS bars at every 4th course of half brick masonry work including anchorage in joints of 75mm in each side in superstructure for all level including cost of all materials as required complete:-
-
-
-
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
915.37
230765
252.1
SUB-HEAD : CLADDING WORK
-
-
-
Providing and fixing gang saw cut of approved thickness mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 ( 1 cement : 4 fine sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing , curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels:-
-
-
-
(i) 14 mm thick Granite of any colour and shade duly approved. - Area of slab upto 0.50 sqm.
51.9
206567
3980.1
Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge:-
-
-
-
14 mm thick Granite work.
93.5
28087
300.4
Providing and fixing stone slab with table rubbed, edges rounded and polished of size 75x50 cm deep and approved thickness fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth including rubbing, curing etc. complete at all levels as required (measurement should be of exposed finished work):-
-
-
-
White Agaria Marble Stone of approved shade of 14 mm thick (75 x 50 cm).
8.1
26562
3279.3
SUB-HEAD : WOOD WORK
-
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :
-
-
-
Local Teak wood
4.58
487258
106388.3
Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge.
-
-
-
Local Teak wood - 35 mm thick shutters
14.85
37415
2519.5
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
127.68
295439
2313.9
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.
-
-
-
Fixed to openings /wooden frames with rawl plugs screws etc.
7941.6
1347690
169.7
Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size)
324
61592
190.1
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
300 x 16 mm
44
12628
287
250 x 16 mm
10
2563
256.3
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
300 x 10 mm
88
11898
135.2
250 x 10 mm
20
2386
119.3
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
125 mm
88
6054
68.8
100 mm
20
1218
60.9
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
-
-
-
Single rubber stopper
88
3960
45
Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws.
110
65142
592.2
Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in- charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter).
36.96
135207
3658.2
Providing 50 × 50 × 50 mm Gamair wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) and making good the walls etc.
6
156
26
Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete.
2
2487
1243.4
SUB-HEAD : STEEL WORK
-
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required.
80.64
658571
8166.8
Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.
162
31234
192.8
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
371.7
258629
695.8
SUB-HEAD : ALUMINIUM WORK
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-
-
-
-
(i) For fixed portion of approved quality:- - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
3524.8
1671108
474.1
(ii) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
1490.35
827144
555
Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-
-
-
-
With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )
314.82
365789
1161.9
With float glass panes of 5.5 mm thickness ( weight not less than 13.50 kg / sqm )
103.95
156653
1507
Providing and fixing stainless steel (SS 304 grade) adjustable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-in-charge:-
-
-
-
255 x 19 mm
516
187721
363.8
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved quality complete as per direction of Engineer-in-charge:-
-
-
-
Anodised aluminium of grade AC 15.
50
5510
110.2
Providing and fixing 100 mm brass locks ( best make of approved quality ) with 6 levers without pair of handles for aluminium doors including necessary cutting and making good etc. complete as per direction of Engineer-in-charge.
24
13488
562
SUB-HEAD : FLOORING AND SKIRTING WORK
-
-
-
Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of Engineer-in-charge.
-
-
-
40mm thick.
10
6143
614.3
Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer in-charge.
-
-
-
600 mm X 300 mm in all shades and design
351.63
390415
1110.3
Providing and laying 1st class quality ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. all complete as per direction of the Engineer in-charge.
-
-
-
(i) Anti-skid Tiles - 300 mm x 300 mm in all shades and designs
128.23
136539
1064.8
(ii) Mat Finish Tiles - 600 mm x 600 mm in all shades and designs 1st class quality ceramic floor Porcelain tiles
598.32
704282
1177.1
Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 -2017, of approved make,in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etcall complete as per direction of the Engineer-in-charge..
-
-
-
(i) Double charged Stainfree vitrified tiles (Glossy) - Size of tile 1200 mm x 600 mm
779.3
1016909
1304.9
(ii) Glassed vitrified tiles (Mat Finih /Anti Skid) - Size of tile 1200 mm x 600 mm
650.27
965781
1485.2
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622 - 2017, of approved make, in all colours & shades, in skirting,riser of steps,over 12 mm thick bed of cement mortar 1:3)1 cement: 3 fine sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc all complete as per direction of the Engineer-in-charge.
-
-
-
Double charged Stainfree vitrified tiles(Glossy) - Size of tile 600 mm x 600 mm
4.41
6618
1500.6
Glazed vitrified tiles (Mat Finih /Anti Skid) - Size of tile 600mmx600 mm
51.08
77800
1523.1
Providing and laying flamed finish Granite stone flooring with border in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc for Granite stone flooring complete in treads of steps and risers using single length upto 2.00 metre. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
14mm thick Granite stone Slab
226.9
732637
3228.9
Extra for pre-finished nosing to treads of steps of Granite stone flooring
192.15
89158
464
Providing and fixing Precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning etc. all complete as per direction of Engineer-in-charge.
-
-
-
In dark shade using ordinary cement
43.5
36279
834
Providing and fixing tactiles of standardized designs conforming to RNIB (The Royal National Institute for the Blind, UK), DETR (Department of the Environment, Transport and the Regions, UK) & ADA (Americans with Disabilities Act, USA) of size 300 x 300 mm in floors, (thickness to be specified by the manufacturer) specially designed to assist the visually impaired - “foot braille”, with water absorption less than 0.5%, of approved brand & manufacturer, laid on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) including grouting of joints etc. all complete as per direction of Engineer-in-charge. (Payment for grouting of joints to be made separately)
71.33
268379
3762.5
80 mm thick factory made c.c. interlocking paver block of M-35 Grade Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge:.
-
-
-
80 mm thick factory made c.c. interlocking paver block of M-35 with approved colour, design and pattern.
40
62080
1552
Providing and fixing Kota stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishing etc. all complete as per direction of Engineer-in-charge. - Kota stone slab 25mm thick
162
285800
1764.2
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1 : 3 ( 1 cement : 3 fine sand ) and joined with ordinary cement slurry mixed with pigment to match the shade of slabs, including rubbing and polishing etc. all complete as per direction of Engineer-in-charge.
13.99
26402
1887.2
SUB-HEAD : ROOFING AND CEILING WORK
-
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
-
-
-
Single socketed pipe - 110 mm OD
86.7
27276
314.6
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
-
-
-
(i) Coupler - 110mm
15
2031
135.4
(ii) Single equal tee without door - 110 x 110 x 110 mm
10
2386
238.6
(iii) Single equal tee with door - 110 x 110 x 110 mm
10
2407
240.7
(iv) Bend 87.5o - 110mm
15
2276
151.7
(v) Plain shoe - 110 mm
10
1315
131.5
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.
-
-
-
110mm
150
36300
242
Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete.
-
-
-
100mm
10
925
92.5
SUB-HEAD : FINISHING WORK
-
-
-
12 mm cement plaster of mix
-
-
-
In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
475.37
106578
224.2
In cement mortar 1 : 6 ( 1 cement : 6 fine sand )
4956.7
1017115
205.2
15 mm cement plaster on the rough side of single or half brick wall of mix:
-
-
-
In cement mortar 1 : 6 ( 1 cement : 6 fine sand )
2034.44
483993
237.9
6 mm cement plaster of mix:
-
-
-
In cement mortar 1 : 3 ( 1 cement : 3 fine sand )
3261.93
605740
185.7
Neat cement punning.
475.37
27001
56.8
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
130.72
13150
100.6
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
(i) New work ( two or more coats) over and including water thinnable priming coat with cement primer.
7828.22
945649
120.8
Finishing walls with premium acrylic smooth exterior paint with Silicon additives of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
(i) New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
2424.84
375365
154.8
Applying priming coat: [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
-
-
-
With ready mixed pink primer of approved brand and manufacture on wood work ( hard & soft wood ).
324.68
15812
48.7
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
556.32
23588
42.4
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: (i) Two or more coats on new work
881
94179
106.9
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour [Payment shall be made after submission of Test Certificate issued by the Manufacturer]. Two coats
130.72
12235
93.6
SUB-HEAD:WATER PROOFING WORK
-
-
-
Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with :
-
-
-
Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
48.4
555676
11480.9
Cement mortar 1:4 (1 cement : 4 fine sand )
14.52
154687
10653.4
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound, as directed by Engineer-in-Charge and consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
81
35510
438.4
SUB-HEAD : SANITARY WORKS
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.
18
102242
5680.1
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
6
32243
5373.8
Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
Range of three urinal basins with10 litre white P.V.C. automatic flushing cistern.
6
58811
9801.8
Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.
2
6254
3127.2
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively.
2
2614
1307
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:
-
-
-
Flat back wash basin of size 550x400mm.
24
33888
1412
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:
-
-
-
(i) Kitchen sink without drain board - 610x460 mm bowl depth 200 mm.
1
3511
3511.3
Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings:
-
-
-
Size 600x450x200 mm.
9
55112
6123.6
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
(i) Semi rigid pipe - 32 mm dia
34
3682
108.3
(ii) Flexible pipe - 32 mm dia
34
4284
126
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
10
10420
1042
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
10
8503
850.3
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms
10
2453
245.3
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.
-
-
-
450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms
10
4873
487.3
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.
10
992
99.2
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand):
-
-
-
100 mm dia.
30
11658
388.6
Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 6 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
(i) Single socketed pipe - 110 mm
170.78
64043
375
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC soil, waste & vent pipes pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
-
-
-
(i) Coupler - 110mm
36
4874
135.4
(ii) Single pushfit Coupler - 110mm
15
1793
119.5
(iii) Single equal tee without door - 110 x 110 x 110 mm
20
4772
238.6
(iv) Single equal tee with door - 110 x 110 x 110 mm
20
4814
240.7
(v) Double equal junction of required degree without door - 110 x 110 x 110 mm
20
4526
226.3
(vi) Double equal junction of required degree with door - 110 x 110 x 110 mm
20
5512
275.6
(vii) Bend 87.5o - 110mm
25
3793
151.7
(viii) Plain shoe - 110 mm
15
1973
131.5
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.
(i) 110 mm
285
67631
237.3
SUB-HEAD : WATER SUPPLY
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. - Internal work - Exposed on wall
-
-
-
15 mm nominal outer dia .Pipes.
20
4918
245.9
20 mm nominal outer dia .Pipes.
20
6662
333.1
25 mm nominal outer dia .Pipes.
20
8844
442.2
32 mm nominal outer dia .Pipes.
20
10930
546.5
40 mm nominal outer dia .Pipes.
10
7377
737.7
50 mm nominal outer dia .Pipes.
10
10681
1068.1
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. - Concealed work including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia .Pipes.
90
42453
471.7
20 mm nominal outer dia .Pipes.
60
34290
571.5
25 mm nominal outer dia .Pipes.
25
17813
712.5
32 mm nominal outer dia .Pipes.
20
16546
827.3
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. - External work
-
-
-
15 mm nominal outer dia .Pipes.
20
4268
213.4
20 mm nominal outer dia .Pipes.
20
5688
284.4
25 mm nominal outer dia .Pipes.
10
4000
400
32 mm nominal outer dia .Pipes.
10
4798
479.8
40 mm nominal outer dia .Pipes.
50
31700
634
50 mm nominal outer dia .Pipes.
10
9556
955.6
Providing and fixing brass bib cock of approved quality :
-
-
-
15 mm nominal bore
30
15540
518
Providing and fixing brass stop cock of approved quality :
-
-
-
15 mm dia nominal bore
30
25884
862.8
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
25 mm nominal bore
4
2552
637.9
40 mm nominal bore
4
3404
851
Providing and fixing gun metal non-return valve of approved quality (screwed end):
-
-
-
(i) 25 mm nominal bore - Vertical
3
2042
680.8
(ii) 40 mm nominal bore - Vertical
3
3827
1275.7
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
10000
121000
12.1
Constructing masonry Chamber 30x30x50 cm, inside , in brick work in cement mortar 1:4 (1 cement :4 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
With Second Class bricks
5
12683
2536.5
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:
-
-
-
100 mm diameter
2
373
186.5
SUB HEAD : SEWAGE AND DRAINAGE WORKS
-
-
-
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
1
61473
61472.8
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
6
57989
9664.8
Supplying and installation of 2 H.P Mono block Pump 50x40 mm Suction and delivery pipe complete fabricated to C.0 base of standard size with holding down bolt with panel board, single phase connection motor and starter to main switch, indicator and earthening etc. complete as per direction of the Engineer-In-Charge (No additional cost for electrification upto main switch will be paid seperately) Measurement to be taken after successful operation of the Pump)
1
23652
23652
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements