Public Works Department Tender

Providing and fitting fixing of 10,000 GPH Capacity & 20 HP, 76m Head minimum 3 star rating water lubricated submersible pump motor set of maximum 150/200mm outer dia. With maximum 8(eight) stages coupled with required water & non-over loading submersible pump & motor suitable for 340-440 volts,3 phase 50Hz A.C supply and star delta method of starting, along with 35m 1x2x3x10 sq.mm joint less PVC 3(three) core double length flat cable(continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non-return valve cum discharge case in/c supplying of 10Nos. suitable guard with clips & nuts &bolts,2(two) pair M.S column clamps in/c. installation of submersible pump and motor upto the depth of 100 ft by GI pipe(conforming to IS: 1239 medium class) for column assembly which will be supplied by the agency at his own cost as per direction of the Engineer-in-charge conforming to the terms & conditions of the contract(Each pump with motor shall consist of Stainless closed type impeller, C.I bowl, C.I discharge case, pump shaft(Stainless Steel), bush(Bronze), Shaft sleeve(Bronze/chromium),sand guard, winding motor, stator, counter thrust plate, thrust plate, thrust bearing segment etc conforming to related BIS codes) (GI Falnge, GI column pipe will be issued by the Department at free of cost.) (Approved Item)

Providing and fitting fixing of 7500 GPH & 15 HP,76mtr Head water lubricated submersible pump motor set of maximum 200mm outer dia with maximum 3(three) stages coupled with required wet and non-over loading submersible motor suitable for 340-440 volts,3 phase 50Hz A.C supply and star delta method of starting alongwith 35mx1x2x3x 10 sqmm joint less PVC 3(three) core double length flat cable(continuous length) of suitable size fitted with submersible motor,suction case,strainer,coupling key,vertical non-return valve cum discharge case in/c supplying of 10Nos. suitable guard with clips & nuts & bolts,2(two) pair M.S column clamps in/c. installation of submerssible pump and motor upto the depth of 100 ft by GI pipe(conforming to IS: 1239 medium class) for Column assembly which will be suppiled by the agency at his own cost as per direction of the Engineer-in-charge conforming to terms & conditions of the contract(each pump with motor shall consist of Stainless closed type impeller,C.I bowl,C.I discharge case,pump shaft(Stainless Steel ), bush(Bronze),Shaft sleeve(Bronze/chromium), sand guard,windening,motor,startor,counter thrust plate, thrust plate, thrust bearing segment etc conforming to related BIS codes. (Approved Item)

Providing and fitting fixing of 5,000 GPH capacity 7 10 HP, 76m Head minimum 3 star rating water lubricated submersible pump motor set of maximum 100 mm outer dia. With maximum 7(seven) stages coupled with required wet and non-over loading submersible motor suitable for 340-440 volts, 3 phase 50Hz A.C supply and star delta method of starting, along with 35m 1x2x4 sq.mm joint less PVC 3(three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non-return valve cum discharge case in/c supplying of 10 Nos. suitable guard with clips & nuts & bolts, 2(two) pair M.S. clamps in/c. installation of submersible pump and motor upto the depth of 100 ft GI pipe (conforming to IS: 1239 medium class) for column assembly which will be supplied by the agency at his own cost) as per direction of the Engineer-in-charge conformiing to the terms & conditions of the contract(Each pump with motor shall consist of Stainless closed type impeller, C.I bowl, C.I discharge case, pump shaft (Stainless Steel), bush (Bronze), Shaft sleeve (Bronze/chromium), sand guard, winding motor, stator, counter thrust plate, thrust plate, thrust bearing segment etc conforming to related BIS codes (GI flange, GI Column Pipe will be issued by the Dept free of cost) (Approed Item)