Public Works Department Tender

Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification Clause 301.5.

Single bamboo palasiding/walling of whole 2nd class bamboo (Jati or Bethua) 65 to 75 mm dia and closely packed & driven @ 150 mm c/c including fitting fixing with half bamboo kamis horizontally in three rows with cane or tying with wire complete and struts 1.5 m apart longitudinally and providing bitumen drum sheet walling fixed with nails as per drawing and MoRD technical specification Clause 1302.5. A) Driven at least 900 mm below ground and 1200 mm above ground on average.

Patch repairing/ Maintenance of bituminous surface road using jhamma brick aggregate & Vioscocity graded bitumen (VG-30) Repairing pot holes and making up small depressions with ramming or power rolling after removal/ Disposal of disintegrated materials within a lead of 50m, cutting potholes to regular shapes with vertical edges and levelling the bottom, cleaning the same with compressed air or any appropriate method including screening, cleaning of aggregates; filling up with hama chips using bitumen of VG-30 Grade @ 54 Kg per m3 of loose volume of Jhama brick chips, after applying tack coat of bitumen on sides and and bottom @0.75 Kg/Sqm and finishing the top of repaired surface levelled with adjoining area in proper grade and camber including spreading of sand @ 0.006 cum/sqm of prepared road surface as per direction of the Engineer-in-charge and all as per MoRD technical specification Clauses 1900, 502, 503 and 504.