Public Works Department Tender
... More
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Costs
EMD
₹ 86,93,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWDTR_792687_1Tender No
22/EO/PMGSY-III (FDR)/TRRDA/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.tripura.gov.in/pwd/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Excavation in Cutting in soil by manual means with lead upto 50 m. Excavation in Roadway cutting in soil by using manual means and carrying of cut earth to embankment site with all lifts and lead upto 50 m as per Technical Specification Clause 302.3
5732
226
1295432
... More
Construction of Subgrade and Earthen Shoulders
-
-
-
... More
Construction of subgrade and earhen shoulders With approved materials obtained from borrow pits with all Lifts and leads, transporting to site, spreding, grading to required slope and compacted to meet requirement of Table 300.2 with as per Technical Specification clauses 303.1
-
-
-
... More
For Subgrade and Earthen Shoulders
8968
199
1790013
... More
Stabilised Base with FDR
-
-
-
... More
Stabilization of in-situ (existing pavement crust) or soil or otherwise sub base/ base course up to the required depth by cold in-situ recycling using cement and chemical additives / otherwise: Providing pulverizing, spreading, milling and mixing of chemical additives at the appropriate rate as per job mix design in accordance with IRC-SP-72-2015 , IRC-37-2012 & 2018 and IRC SP 89 (part II) 2018. Cementitious additive @ rate of minimum 4 - 6% and CCS/CS additive should be spread on the existing pavement using a mobile truck mounted containerized cement/ additive spreader with micro processor controlled weighing and spreading system. The additive spreader shall have variable working width sufficient to cover whole pavement lane. The in-situ stabilization process shall be carried out by a mobile and self propelled stabilizer / reclaimer of working width of 2.4 m and with minimum engine horse power of 440 kw with a variable working depth up to 50 cm. The resultant stabilized mix then would be profiled to the required grade, level and thickness using motor grader and the mix would be compacted using 20 tonne pad foot roller in combination with smooth wheel roller to achieve desired proctor density as per IRC 37-2012 & 2018 and complete in all respect and curing with water as required including all materials, labour and machinery etc. The entire in-situ process would be carried out in single pass with milling and pulverising of damaged asphalt pavement / soil/ aggregates / soil-aggregate mixture to the desired depth and with simultaneous addition of additives and water with machine integrated spray bars fitted on the wheeled self-propelled and vibratory pad foot roller to achieve the desired proctor density in all respects. The tandem roller be followed by Pneumatic Tyre Roller. The minimum unconfined compressive strength (UCS) of stabilized sub base/ base should be 4.5 to 7 MPa after 7 / 28 days of curing as per IRC-SP-72-2015 , IRC-37-2012 & 2018 . Also durability aspects (wet-dry cycles) of stabilized sub base should be satisfied as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The gradation mixes and materials should be as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The train of equipment's to be used are binder spreader- water Tanker- Additive Truck- Recycler- Padfoot Roller (20 Tonne) + Single Drum Compactor- Grader- Tandom Roller- Pneumatic Tyre Roller (20 Tonne)
13427.58
3828
51400776
... More
Construction of GSB
-
-
-
... More
Construction of granular sub-base by providing well graded material (Jhama Brick Aggregate, as per Table 400.1), spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
(A) By Mix in Place Method (ii) For Grading - II Material ( Jhama brick aggregate )
766.35
6151
4714141
... More
Prime coat
-
-
-
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
64573.01
48
3107899
... More
Tack coat
-
-
-
... More
Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503
64573.01
16
1038334
... More
Mix Seal Surfacing
-
-
-
... More
Providing , laying and rolling of close-graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.9 mm ( Type-A ) or 13.2 mm to 0.9 mm (Type-B) aggregates using viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller , finishing to required level and grades as per Technical Specification Clause 509.
64573.01
367
23743496
... More
Provision of 15 nos. rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint.
510
91
46451
... More
Chevron Signs at Bend
508
2415
1227272
... More
Chevron Signs at Sharp Bend(double)
10
2415
24159
... More
Providing and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings and as per MoRT&H Technical Specification Clause 805
20
568
11360
... More
Traffic Signs
-
-
-
... More
Semi Reflective Traffic Signs: Providing and fixing of Semi Reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS Sheet duly stove white colour in front and grey colour in black with red reflective border of 65mm width and required letter and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm x12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x450x600mm, 600mm below ground level as per approved drawing clause 1701.2.2.
-
-
-
... More
with 600 mm equilateral triangle MS sheeting
354
2415
855225
... More
with 600 mm circular MS sheeting
200
2497
499498
... More
with 600 mm x 600 mm square MS sheeting
6
2546
15282
... More
Semi Reflective Direction & Place Identification Sign: Providing and erecting direction and place identification of semi reflective sign board as per IRC: 67 made of 2mmThick M.S sheet duly stove enameled Paint white colour in front and grey colour in back with reflective border of 70mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specification of required shade and colour. Supported and welded on two nos. 47mm x 47mm of 12 SWG square tube of 3050mm height duly strengthened by 25mm x 5mm MS flat iron on edges on back firmly fixed to the ground by means of property design foundation with M – 15 grade cement concrete 450mm x 450mm x 600mm below ground level as per provided drawing and technical specification clause 1701.
2
3485
6972
... More
Pedestrian Crossing Markings: Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ color using hot thermoplastic material including reflectorising glass beads @ 250 gms per sqm area by fully / semi automatic thermoplast paint applicator machine fitted profile shoe, glass beads dispenser, propane tank heater and profile shoe heater including cost of cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per MoRT&H Technical Specification Clause 803
63
731
46053
... More
Painting lines, Dashes ,Arroes,etc. on Road in Two Coats on New Work: Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702
5119.2
158
810369
... More
PMGSY Informatory Sign Board with Logo
-
-
-
... More
Providing and fixing of typical PMGSY Informatory Sign Board with Logo as per MORD Specifications and Drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lowermost frame and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The topmost diamond plate will be welded to the middle plate 47mm x47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of frame post and steel tube will be painted with primer and two coats of epoxy paint as per Drawing Clause 1701 and Annexure 1700.1.
-
-
-
... More
Providing and Fixing 'Logo' of PMGSY Project
1
12873
12873
... More
(ii) Logo Board (As per fig. 5 of Road signage under PMGSY published by the NRRDA on Dec'06)
9
3160
28442
... More
Logo of Maintenance Board: Providing and fixing of typical PMGSY Informatory Sign Board with Logo as per MORD Specifications and Drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lowermost frame and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The topmost diamond plate will be welded to the middle plate 47mm x47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of frame post and steel tube will be painted with primer and two coats of epoxy paint as per Drawing Clause 1701 and Annexure 1700.1.
1
16690
16691
... More
Providing and Fixing 'Citizens' Information Board' of PMGSY / Bharat Nirman Project
-
-
-
... More
Providing and fixing typical “Citizen’s information Board” with Logo of PMGSY as per NRRDA Specifications and Drawing having two nos. MS plate of 1mm thick 900 x 750mm size each duly welded with 2 nos. vertical and 4 nos. Horizontal M.S. flat 50mm x 6mm size on back, the ends of the M.S. flats to be welded with 2x2450mm x 1150mm frame of M.S. square posts to be embedded in cement concrete M-15 grade of 600mm x 600mm size and 750mm below the ground level and keeping 50mm height above the ground level, two coats of epoxy painting MS square , flats and backside of the the M.S. sheets with a coat of primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of epoxy coated priming on rear side of the M.S. plates with bands and lettering of different approved shades as directed shown in the approved design with oil bound ready mixed synthetic paint and providing 70mm x 70mm size PMGSY Logo.
2
16690
33381
... More
Construction of 5th Kilometre Stone (Precast) : Reinforced cement concrete M15 grade kilometre stone / local stone of standard design as per IRC:8 fixing in position including painting and printing, etc. as per drawing and Technical Specification Clause 1703.
i) 5th Kilometre Stone(precast)
3
6011
18035
... More
Construction of Ordinary Kilometre Stone (Precast) : Reinforced cement concrete M 15 grade ordinary Kilometre stone with local stone of standard design as per IRC : 8 fixingin in position including painting and printing etc. as per drawing and technical specification clause 1703.
16
3756
60102
... More
Construction of 200 Metre Stone (Precast) : Reinforced cement concrete M 15 grade 200 metre stone with local stone of standard design as per IRC : 8 fixingin in position including painting and printing etc. as per drawing and technical specification clause 1703.
69
954
65829
... More
Boundary Pilar: Reinforced cement concrete M 15 grade Boundary pillars / local stone of standard design as per IRC : 25 fixed in position including finishing and lettering but excluding painting as per drawing and technical specification clause 1704.
176
841
148116
... More
Trapezoidal drain
-
-
-
... More
Trapezoidal drain ( top clear width 600 mm, bottom clear width 300 mm and clear depth of 400 mm
2130
3590
7648511
... More
Surface Drains
-
-
-
... More
Construction of unlined surface drains of average cross-sectional area 0.4 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307.
1733
120
208827
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
462.5
482
222971
... More
Providing Concrete (M-15) for Plain Concrete in open foundations complete as per drawing and Technical specification clause 802, 803, 1202,& 1203
38.44
11262
432942
... More
Brick masonry work in cement mortar in substructure complete excepting pointing & plastering, as per drawing & technical specification Clauses 602, 603, 604, 1202 and 1204 ( In 1:4 cement mortar)
500
9487
4743855
... More
Providing weepholes in brick masonry/stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or PVC pipe ( 110 mm OD of 6.0 Kg/cm2 pressure ) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7
500
329
164680
... More
Repairing of Slab Type Culverts by way of clearing, cleaning, erosion repair, repairs to cracks, parapet wall and protection work as per technical direction
5
22048
110240
... More
BRIDGE AT CH. 16246 M
-
-
-
... More
Dismantling
-
-
-
... More
Dismantling of Structures
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding whenever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and upto a lead of 1000 m as per MoRT&H Technical Specification Clause 202.
-
-
-
... More
Dismantling Steel Work in all Types of Sections upto a height of 5 m above Plinth Level excluding Cutting of rivet
A) Including dismembering
690.8
1715
1184929
... More
Foundation
-
-
-
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
I. Ordinary soil A. Manual means
-
-
-
... More
(I) upto 3.0m depth
416.22
514
214062
... More
Bored Cast-in-Situ piles 1000 mm dia , M-35 grade ( using fine sand ) RCC pile excluding reinforcement complete as per drawing and technical specification and removal of excavated earth with all lifts and lead upto 1000 m.
850
16452
13984498
... More
Pile Load Test on single Vertical Pile in accordance with IS:2911(Part-4) (Reference to MORT&H's specification
1113).
a) Initial and routine load test
225
770
173250
... More
Cement Concrete for Reinforced Concrete ( using fine sand ) in Pile Cap excluding reinforcement complete as per drawing and MoRTH technical specification.
-
-
-
... More
C. RCC Grade M30 (Using Concrete Mixer)
319.02
13648
4354129
... More
Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & technical specifications Clauses 802, 803, 900, 1202 and 1203.
II P.C.C grade M 15
II Nominal mix (1:2.5:5)
22.5
11860
266852
... More
Supplying, fitting & placing HYSD bar reinforcement in foundation complete as per drawings & technical specifications Clauses 1000 & 1202
103.61
91761
9507412
... More
Providing and construction of one span service road to reach island location from one pier location to another pier location
35
1962
68688
... More
Substructure
-
-
-
... More
Plain/reinforced cement concrete in substructure complete including formwork as per drawings & MoRT&H technical specification Clauses 1500, 1700, 2200. (including centering, shuttering, staging etc. but excluding reinforcement)
VII. R.C.C grade M-30
-
-
-
... More
a) upto 5 m height
157.18
11056
1737924
... More
b) Height 5.0m to 10.0m
91.8
11387
1045327
... More
III) For height above 10 m
31.05
11860
368256
... More
Supplying, fitting & placing HYSD bar reinforcement (Fe415) in substructure completed as per drawings & technical specification Clauses 1002, 1005, 1010 and 1202
32.97
92016
3033785
... More
Backfilling behind abutment, wing wall & return wall complete as per drawings & technical specification Clause 1204.3.8
(ii) Sandy material
157.69
2456
387365
... More
Supplying, fitting & fixing in position true to line & level elastomeric bearing conforming to IRC : 83 ( Part-II) Section IX complete including all accessories with additional steel fixtures as per drawings & technical specification with all lifts and lead upto 1000 m.
152182.8
1
243492
... More
Providing & laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8
30.63
4425
135538
... More
Super - Structure
-
-
-
... More
Providing & laying reinforced cement concrete in superstructure as per drawings & MoRD technical specifications Clauses 800, 900, 1205.4 & 1205.5 (including centering, shuttering, staging etc. but excluding reinforcement).
III R.C.C. Grade M 30
1 For height upto 5 m
159
15933
2533434
... More
Supplying, fitting, & placing HYSD bar reinforcement in superstructure complete as per drawing & technical specifications Clauses 1002, 1010 & 1202
26.25
93737
2460621
... More
Providing and laying Cement concrete wearing coat M-30 grade including all formworks & required reinforcement complete as per drawings & MoRT&H technical specification Clauses 2702. (including centering, shuttering, staging etc. but excluding reinforcement ).
33.91
16857
571651
... More
Construction of R.C.C railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line & grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm including reinforcement as per drawing and technical specifications Clauses 800, 900 and 1208.3
294.78
4225
1245563
... More
Providing and fixing in position Drainage spouts complete as per drawing & technical specifications Clause 1209
19
1550
29458
... More
Burried Joint Providing and laying a burried expansion joint, expansion gap being 20 mm, covered with 12 mm thick, 200 mm wide galvanised weldable structural steel plate as per IS: 2062, placed symmetrical to centre line of the joint, resting freely over the top surface of the deck concrete, welding of 8 mm dia. 100 mm long galvanised nails spaced 300 mm c/c along the centre line of the plate, all as per drawings and MoRT&H Technical Specification Clause 2604.
50.7
2089
105958
... More
P.C.C. M 15 oridinary grade (1:2.5:5) levelling course below approach slab complete as per drawing & technical specifications Clauses 800 and 1211
II P.C.C grade M 15
(i) Nominal mix (1:2.5:5)
8.87
12258
108729
... More
Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawings and MoRT&H Technical Specification Clause 2605.
50.7
238
12072
... More
Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawings and MoRT&H Technical Specification Clause 2704, 1500, 1600, 1700.
(A) RCC M 30 Grade
17.75
18917
335782
... More
Maintenance
-
-
-
... More
Total for 1st year maintenance (including 18% GST)
17.37
82683
1436121
... More
Total for 2nd year maintenance (including 18% GST)
17.37
89239
1549992
... More
Total for 3rd year maintenance (including 18% GST)
17.37
179754
3122147
... More
Total for 4th year maintenance (including 18% GST)
17.37
207254
3599795
... More
Total for 5th year maintenance (including 18% GST)
17.37
213992
3716827
... More
2. Atharabula Main road to Tulshiram via Warengbari . (Length= 5.3 km) under killa block.
-
-
-
... More
Clearing and grubbing road land
-
-
-
... More
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and of serviceable material to be used or auctioned upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification Clause 201.
1.38
32867
45358
... More
Cutting of Trees, including Cutting of Trunks , Branches and Removal of Stumps
Cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per Technical Specification Clause 201.
-
-
-
... More
Girth above 300 mm to 600 mm
26
382
9950
... More
Girth above 600 mm to 900 mm
32
605
19379
... More
Setting Out
-
-
-
... More
Construction of Subgrade and Earthen Shoulders
-
-
-
... More
Construction of subgrade and earhen shoulders With approved materials obtained from borrow pits with all Lifts and leads, transporting to site, spreding, grading to required slope and compacted to meet requirement of Table 300.2 with as per Technical Specification clauses 303.1
1787.74
199
356833
... More
Construction of Embankment with Material Obtained from Roadway Cutting
-
-
-
... More
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 of Specifications for Rural Roads (1st Revision).
For spreading beyond 100 m
3713.23
66
248044
... More
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 of Specifications for Rural Roads (1st Revision).
For spreading within 100 m
8664.21
48
421947
... More
Stabilised Base wit FDR
-
-
-
... More
Stabilization of in-situ (existing pavement crust) or soil or otherwise sub base/ base course up to the required depth by cold in-situ recycling using cement and chemical additives / otherwise: Providing pulverizing, spreading, milling and mixing of chemical additives at the appropriate rate as per job mix design in accordance with IRC-SP-72-2015 , IRC-37-2012 & 2018 and IRC SP 89 (part II) 2018. Cementitious additive @ rate of minimum 4 - 6% and CCS/CS additive should be spread on the existing pavement using a mobile truck mounted containerized cement/ additive spreader with micro processor controlled weighing and spreading system. The additive spreader shall have variable working width sufficient to cover whole pavement lane. The in-situ stabilization process shall be carried out by a mobile and self propelled stabilizer / reclaimer of working width of 2.4 m and with minimum engine horse power of 440 kw with a variable working depth up to 50 cm. The resultant stabilized mix then would be profiled to the required grade, level and thickness using motor grader and the mix would be compacted using 20 tonne pad foot roller in combination with smooth wheel roller to achieve desired proctor density as per IRC 37-2012 & 2018 and complete in all respect and curing with water as required including all materials, labour and machinery etc. The entire in-situ process would be carried out in single pass with milling and pulverising of damaged asphalt pavement / soil/ aggregates / soil-aggregate mixture to the desired depth and with simultaneous addition of additives and water with machine integrated spray bars fitted on the wheeled self-propelled and vibratory pad foot roller to achieve the desired proctor density in all respects. The tandem roller be followed by Pneumatic Tyre Roller. The minimum unconfined compressive strength (UCS) of stabilized sub base/ base should be 4.5 to 7 MPa after 7 / 28 days of curing as per IRC-SP-72-2015 , IRC-37-2012 & 2018 . Also durability aspects (wet-dry cycles) of stabilized sub base should be satisfied as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The gradation mixes and materials should be as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The train of equipment's to be used are binder spreader- water Tanker- Additive Truck- Recycler- Padfoot Roller (20 Tonne) + Single Drum Compactor- Grader- Tandom Roller- Pneumatic Tyre Roller (20 Tonne)
4427.51
3828
16948508
... More
Granular Sub-base with Well Graded Material ( Table 400.1 ) using Jhama Brick Aggregate
-
-
-
... More
(A) By Mix in Place Method
-
-
-
... More
Construction of granular sub-base by providing well graded material ( Jhama Brick Aggregate , as per Table 400.1 ), spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
497.25
6027
2996966
... More
Prime Coat with Bitumen Emulsion
-
-
-
... More
Low porosity - Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
20272.5
47
962133
... More
Tack Coat with Bitumen Emulsion
-
-
-
... More
(ii) Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503
20272.5
16
324563
... More
25 mm thick Mix Seal Surfacing
-
-
-
... More
Providing , laying and rolling of close-graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.9 mm ( Type-A ) or 13.2 mm to 0.9 mm (Type-B) aggregates using viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller , finishing to required level and grades as per Technical Specification Clause 509. By Mechanical Means
Type-B Bitumen VG-30
20272.5
346
7016312
... More
Brick Masonry Retaining-Wall(Height-2meter)
-
-
-
... More
Excavation for Structures
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
upto 3m depth
390
482
188019
... More
P.C.C grade M 15 ( using jhama brick aggregate )
Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & technical specifications Clauses 802, 803, 900, 1202 and 1203.
570
8690
4953534
... More
Providing weepholes in brick masonry/stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or PVC pipe ( 110 mm OD of 6.0 Kg/cm2 pressure ) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7.
500
328
164300
... More
Filling in foundation trenches as per drawing & technical specification Clause 305.3.9
I) Sand filling
45
2127
95758
... More
Construction of road side pucca drain with M10 ( 1:3:6 with jhama brick aggregate) to specified lines, grades, levels and dimensions as per approved design and Technical Specification Clause 307, 1606. Excavated material to be used in embankment at site.
Trapezoidal drain ( top clear width 600 mm, bottom clear width 300 mm and clear depth of 600 mm
(a) In Ordinary Soil
220
3152
693554
... More
Box culvert
-
-
-
... More
Excavation for Structures
-
-
-
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
I) Ordinary Soil
152.06
306
46637
... More
Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & technical specifications Clauses 802, 803, 900, 1202 and 1203.
-
-
-
... More
Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & technical specifications Clauses 802, 803, 900, 1202 and 1203. P.C.C grade M 15 ( using jhama brick aggregate ) i)Nominal mix (1:2.5:5)
14.38
8490
122092
... More
Brick masorny work in cement mortar in foundation completed excluding pointing & plastering as per drawing & technical specifications Clauses 600, 1202 & 1203.
-
-
-
... More
Brick masorny work in cement mortar in foundation completed excluding pointing & plastering as per drawing & technical specifications Clauses 600, 1202 & 1203. ii) Brick masonry in 1:4 cement mortar
32.82
8786
288363
... More
Brick masonry work in cement mortar in substructure complete excepting pointing & plastering, as per drawing & technical specification Clauses 602, 603, 604, 1202 and 1204 ii) In 1:4 cement mortar
16.36
9168
149996
... More
Pointing with cement mortar (1:3) on brickwork as per drawing & technical specification Clauses 613.3 & 1204
2.47
103
255
... More
Providing and laying reinforced cement concrete in superstructure for height upto 5m with coarse aggregates of appropriate nominal sizes and grading including screening and cleaning, fine aggregate (sand) conforming to proper grading zone, both of approved quality, cement and water reducing admixtures, as necessary and mixing in concrete mixwe of suitable capacity and cost of curing with water, including labour, including preparation of dsign mix approved of the same by the Engineer in charge, cost for quality control, sampling, testing etc. including cost of form work and staging upto 5m but excluding reinforcement complete as per drawings as per drawing and technical specifications Clauses 800, 1401.4.1 and 1401.4.3 of Specification for Rural Roads, MORD.
-
-
-
... More
II) R.C.C grade M 25 (Design Mix) Plain/reinforced cement concrete in substructure complete including formwork as per drawings & technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. VI)R.C.C grade M-25 i)upto 5 m height
19.59
11497
225240
... More
Providing & laying reinforced cement concrete (using fine sand) in superstructure as per drawings & technical specifications Clauses 800, 900, 1205.4 & 1205.5 RCC Grade M-25 Mix-
For height upto 5 m
9.21
12475
114899
... More
Providing PCC M 20 (with jhama brick aggregate) architectural coping on the top of wing wall, return wall etc. complete including formwork as per drawing & technical specification Clauses 615, 710 & 1204.3.11
17.08
901
15390
... More
Supplying, fitting, & placing HYSD bar reinforcement in superstructure complete as per drawing & technical specifications Clauses 1002, 1010 & 1202
(@ 100 kg/cum of RCC)
0.92
93661
86169
... More
Supplying,fitting, and placing HYSD bar reinforcement in superstructure including cost of steel materials and carriage, including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1mm in size and conforming to IS:280 at every intersection, hooked and bent to correct shape and place on forms etc. including cost of black annealed wire and cost of loading, unloading of all steel materials complete as per drawing and technical specifications Clauses 1002, 1006 and 1202 of Specification for Rural Roads, MORD.
2.24
91940
205946
... More
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards outward face complete as per drawing and technical specification Clauses 614, 709, 1206.3 of Specification for rural Roads including curing complete.
90
328
29574
... More
Backfilling behind abutment, wing wall & return wall complete as per drawings & technical specification Clause 1204.3.8 II) Sandy material
68.98
2434
167946
... More
Providing & laying filter media with jhama brick aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8
32.56
4084
133001
... More
Providing and fixing in position Drainage spouts complete as per drawing & technical specifications Clause 1209
4
1548
6195
... More
Providing bituminous wearing coat comprising of 20 mm thick premix carpet with seal coat Type D (with fine sand ) for culverts as per drawing & technical specifications Clauses 1206.2 and 500
2.34
364
854
... More
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per Technical Specification Clause 510
31.2
53
1671
... More
II) Maintainence of culverts slab type (EXISTING)
-
-
-
... More
Maintenance of Slab Type Culverts by way of clearing, cleaning, erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification 1908
8
5512
44096
... More
PMGSY Informatory Sign Board with Logo
-
-
-
... More
Providing and fixing of typical PMGSY "Logo board/Logo Board at starting point" as per drawing and specifications of NRRDA having 1.6 mm thick 2 nos. 600 x 600 mm MS Sheet and 1.6 mm thick 2 nos. 1100 x 300 mm MS plate facing both sides of the alignment duly welded all Board with vertical square Post and 2 nos horizontal MS flats on back, embedding leg of MS square post of 75mm x 75mm of 12 SWG sheet in M-15 grade cement concrete 600 mm square size and 750 mm below the ground level and keeping 50mm height above the ground level, two coats of Epoxy painting on MS square flats and back side of the MS sheets over a coat of primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of Epoxy coated priming of rearside of the MS plates with Bands and letterings of different shades and sizes as directed and specified in the approved design with oil bound ready mixed synthetic paint complete in all respect.
The rate of each Board is inclusive of M.S square, M.S flats, M.S plates, all labour, fabricating and welding charges, cost of paintings and primer, cost of carriage & fixing and all other incidental charges in this regard complete in all respect maintaining line and level as directed by the Engineer-in-Charge including cost of protection, barricading and lighting etc.
-
-
-
... More
(i) Logo Board at starting point (As per fig. 107 of Road signage under PMGSY published by the NRRDA on Dec'06)
4
12497
49989
... More
Providing and fixing 'Logo' of PMGSY Project
-
-
-
... More
Logo of PMGSY Project: Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
Using 0.252 cum M-15 Cement Concrete
3
12497
37492
... More
Providing and fixing "Citizen's Information Board" for PMGSY Project
-
-
-
... More
Providing and fixing of typical Citizens' Information board with Logo as per MORD specifications and drawing. Two MS Plates of 2.0 mm thick, duly welded with MS flat iron 50 mm x 5 mm size on back on edges. The flat iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 76.1 mm OD (horizontal) and 2 Nos. 76.1 mm OD (Vertical) steel tube posts { as per IS : 1161 - 1979, Medium Class } duly embedded in cement concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm , 750 mm below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube and flats will be painted with primer and two coats of epoxy paint as per drawing and specification Clause 1701 and Annexure 1700.1
3
16606
49818
... More
Kilometre Stone ( with RCC M15 grade using jhama brick aggregate ) :
-
-
-
... More
Reinforced cement concrete M15 grade ( using jhama brick aggregate ) kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc. as per drawing and Technical Specification Clause 1703.
-
-
-
... More
i) 5th Kilometre Stone (Precast) : Construction wing will add cost of 0.392 cum M-15 Cement Concrete and 3.68 Kg of Steel reinforcement for each post
1
5424
5425
... More
ii) Ordinary Kilometre Stone (Precast) : Construction wing will add cost of 0.269 cum M-15 Cement Concrete and 1.88 Kg of Steel reinforcement
5
3377
16888
... More
iii) 200 Metre Stone (Precast) :
Construction wing will add cost of 0.048 cum M-15 Cement Concrete and 2.00 Kg of Steel reinforcement
21
882
18523
... More
Boundary Pillar : Supplying, fitting and fixing boundary pillar as per type design IRC:25 with cement concrete 1:2:4 with stone chips including cost of providing 2 nos. of 6mm dia M.S. rods of length 1.84m in the form of inverted U-shape as main reinforcements placed crosswise to each uther and 5nos. of round shaped 6mm dia M.S. rods used as binder, the placing of 1st binder should be at 75mm below the top finished suface and the other 4 nos. of binders should be placed at 1.85mm c/c and to be 90cm long with 20cm dia at the base tapering to 15cm dia at the top with head properly round and sunk inscriptions (as directed) at the side with 60cm embedment into the ground after making hole in the ground of size 50cmx50cmx75cm and repacking the hole properly with cement concrete 1:4:8 with stone chips anf finishing the exposed portion of 30cm length with white wash & painting the inscriptio as directed including the carriage of the post to the site with loading & unloading etc. complete in all respect as per drawing and Technical Specification Clause 1704 of Specification for Rural Roads (1st Revision).
Construction wing will add cost of 0.022 cum M-15 Cement Concrete and 1.40 Kg of Steel reinforcement
108
823
88915
... More
Providing and fixing typical "Maintenance Information Board"
Providing and fixing of typical maintenance board with Logo as per MORD specifications and drawing with CC structure made with M-15 of Size 1150 mm in length, 300 mm in thickness and 2450 mm in height all above G.L. with foundation with M-15 concrete of size 1150 mm x 600 mm x 750 mm , 750 mm below ground level with skin reinforcemet with 8 mm dia TMT bars @ 200 cm C/C from bottom of the structure. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of structure will be painted with primer and two coats of epoxy paint as per drawing and specification Clause 1701 and Annexure 1700.1- Board "A".
1
12497
12497
... More
Guard Post
-
-
-
... More
Supplying, Fitting, and Fixing R.C. Guard Post: 1.37m long with cement concrete 1:2:4 with graded stone chips of 13.2mm down casting curing complete including cost of providing 4 nos of 12mm dia MS road of length 1.54m as main reinforcement and 6 nos of round shaped 6mm dia MS rods used as binders; the placing of the 1st binder should be at 75mm below the top finished surface and the other 5 nos of binders should be placed at 245 mm C/C ; the guard post is of octagonal section with inscribed circle of diameter 24cm at the base tapering to corresponding dimensions of 16cm at the top including 2 coats of painting with best quality synthetic enamel paint of approved make and brand to form 6 nos horizontal alternate brands in white/ tannery yellow and black to 90cm. length standing up above ground after mending good damages if any during sinking of shuttering, making hole in ground of 47cm depth and 30cm minimum dia, fixing the guard post in the same hole and replacing the earth thoroughly so as to keep the guard post standing properly erect in correct position true in line and length including carriage of R.C. guard post from stack yard to the site including loading into the truck and unloading at site complete in all respects.
96
540
51866
... More
Traffic Signs ( using jhama brick aggregate in CC/ PCC )
-
-
-
... More
Retero Reflective Traffic Signs:
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove, white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm x 12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 x 450 x 600mm, 600mm below ground level as per approved drawing Clause 1701.2.2.
-
-
-
... More
ii) with 600 mm equilateral triangle MS sheeting
156
2668
416342
... More
iii) with 600 mm circular MS sheeting
300
2782
834678
... More
vi) with 600 mm x 600 mm square MS sheeting
72
2850
205269
... More
Direction and place identification signs with size more than 0.9 sqm sign board ( using jhama brick aggregate in CC /PCC)
-
-
-
... More
Retero-Reflective Traffic signs : Providing and erecting direction and place identification of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and require message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47mm x 47mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 and annexure 1700.1 of Specification for Rural Roads.
20
4483
89663
... More
Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work
-
-
-
... More
(ii) Up to 10 cm in width - Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Reference to MORT&H's specification 803).
1060
158
167798
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic
compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per Clause 803 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
530
731
387430
... More
Maintenance
-
-
-
... More
Total for 1st year maintenance (including 18% GST)
5.3
39600
209880
... More
Total for 2nd year maintenance (including 18% GST)
5.3
46956
248867
... More
Total for 3rd year maintenance (including 18% GST)
5.3
140000
742000
... More
Total for 4th year maintenance (including 18% GST)
5.3
180000
954000
... More
Total for 5th year maintenance (including 18% GST)
5.3
240000
1272000
... More
3.Amarpur Natunbazar Rd Near Amar Sagar to Atam Bhagya Road via Kheya Ghat and Krishtan Para (Package No-TR-06-07P3) (Length= 7194 M) under Amarpur block.
-
-
-
... More
Clearing and grubbing road land
-
-
-
... More
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and of serviceable material to be used or auctioned upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification Clause 201.
1.75
32867
57519
... More
Dismantling Work in existing Culverts
-
-
-
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.
-
-
-
... More
i) PCC
104.21
667
69581
... More
ii) RCC in Superstructure
38.64
1892
73122
... More
Removal of Hume Pipes
-
-
-
... More
Removing all types of Hume pipes and stacking within a lead of 1000m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202 of Specification of Rural Roads.
-
-
-
... More
Above 900 mm dia Hume pipe
50
724
36220
... More
Excavation in Cutting in soil by manual means with lead upto 50 m. Excavation in Roadway cutting in soil by using manual means and carrying of cut earth to embankment site with all lifts and lead upto 50 m as per Technical Specification Clause 302.3
1077
226
243402
... More
Stabilised Base with FDR
-
-
-
... More
Stabilization of in-situ (existing pavement crust) or soil or otherwise sub base/ base course up to the required depth by cold in-situ recycling using cement and chemical additives / otherwise: Providing pulverizing, spreading, milling and mixing of chemical additives at the appropriate rate as per job mix design in accordance with IRC-SP-72-2015 , IRC-37-2012 & 2018 and IRC SP 89 (part II) 2018. Cementitious additive @ rate of minimum 4 - 6% and CCS/CS additive should be spread on the existing pavement using a mobile truck mounted containerized cement/ additive spreader with micro processor controlled weighing and spreading system. The additive spreader shall have variable working width sufficient to cover whole pavement lane. The in-situ stabilization process shall be carried out by a mobile and self propelled stabilizer / reclaimer of working width of 2.4 m and with minimum engine horse power of 440 kw with a variable working depth up to 50 cm. The resultant stabilized mix then would be profiled to the required grade, level and thickness using motor grader and the mix would be compacted using 20 tonne pad foot roller in combination with smooth wheel roller to achieve desired proctor density as per IRC 37-2012 & 2018 and complete in all respect and curing with water as required including all materials, labour and machinery etc. The entire in-situ process would be carried out in single pass with milling and pulverising of damaged asphalt pavement / soil/ aggregates / soil-aggregate mixture to the desired depth and with simultaneous addition of additives and water with machine integrated spray bars fitted on the wheeled self-propelled and vibratory pad foot roller to achieve the desired proctor density in all respects. The tandem roller be followed by Pneumatic Tyre Roller. The minimum unconfined compressive strength (UCS) of stabilized sub base/ base should be 4.5 to 7 MPa after 7 / 28 days of curing as per IRC-SP-72-2015 , IRC-37-2012 & 2018 . Also durability aspects (wet-dry cycles) of stabilized sub base should be satisfied as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The gradation mixes and materials should be as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The train of equipment's to be used are binder spreader- water Tanker- Additive Truck- Recycler- Padfoot Roller (20 Tonne) + Single Drum Compactor- Grader- Tandom Roller- Pneumatic Tyre Roller (20 Tonne)
5553.79
3828
21259908
... More
Construction of GSB
-
-
-
... More
Construction of granular sub-base by providing well graded material (Jhama Brick Aggregate, as per Table 400.1), spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
(A) By Mix in Place Method (ii) For Grading - II Material ( Jhama brick aggregate )
386.18
6088
2351180
... More
Prime coat
-
-
-
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
26899.23
47
1286052
... More
Tack coat
-
-
-
... More
Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503
26899.23
16
430388
... More
Mix Seal Surfacing
-
-
-
... More
Providing , laying and rolling of close-graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.9 mm ( Type-A ) or 13.2 mm to 0.9 mm (Type-B) aggregates using viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller , finishing to required level and grades as per Technical Specification Clause 509.
26899.23
363
9782443
... More
Provision of 15 nos. rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint.
286.88
91
26115
... More
Chevron Signs at Bend
83
2409
199994
... More
Chevron Signs at Sharp Bend(double)
12
2409
28915
... More
Providing and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings and as per MoRT&H Technical Specification Clause 805
44
568
24992
... More
Traffic Signs
-
-
-
... More
Semi Reflective Traffic Signs: Providing and fixing of Semi Reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS Sheet duly stove white colour in front and grey colour in black with red reflective border of 65mm width and required letter and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm x12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x450x600mm, 600mm below ground level as per approved drawing clause 1701.2.2.
-
-
-
... More
with 600 mm equilateral triangle MS sheeting
59
2409
142165
... More
with 600 mm circular MS sheeting
54
2491
134523
... More
with 600 mm x 600 mm square MS sheeting
3
2540
7622
... More
Semi Reflective Direction & Place Identification Sign: Providing and erecting direction and place identification of semi reflective sign board as per IRC: 67 made of 2mmThick M.S sheet duly stove enameled Paint white colour in front and grey colour in back with reflective border of 70mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specification of required shade and colour. Supported and welded on two nos. 47mm x 47mm of 12 SWG square tube of 3050mm height duly strengthened by 25mm x 5mm MS flat iron on edges on back firmly fixed to the ground by means of property design foundation with M – 15 grade cement concrete 450mm x 450mm x 600mm below ground level as per provided drawing and technical specification clause 1701.
1
3477
3477
... More
Pedestrian Crossing Markings: Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ color using hot thermoplastic material including reflectorising glass beads @ 250 gms per sqm area by fully / semi automatic thermoplast paint applicator machine fitted profile shoe, glass beads dispenser, propane tank heater and profile shoe heater including cost of cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per MoRT&H Technical Specification Clause 803
63
731
46053
... More
Painting lines, Dashes ,Arroes,etc. on Road in Two Coats on New Work: Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702
2078.4
158
329011
... More
PMGSY Informatory Sign Board with Logo
-
-
-
... More
Providing and fixing of typical PMGSY Informatory Sign Board with Logo as per MORD Specifications and Drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lowermost frame and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The topmost diamond plate will be welded to the middle plate 47mm x47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of frame post and steel tube will be painted with primer and two coats of epoxy paint as per Drawing Clause 1701 and Annexure 1700.1.
-
-
-
... More
Providing and Fixing 'Logo' of PMGSY Project
1
12860
12861
... More
(ii) Logo Board (As per fig. 5 of Road signage under PMGSY published by the NRRDA on Dec'06)
4
3147
12590
... More
Logo of Maintenance Board: Providing and fixing of typical PMGSY Informatory Sign Board with Logo as per MORD Specifications and Drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lowermost frame and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The topmost diamond plate will be welded to the middle plate 47mm x47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of frame post and steel tube will be painted with primer and two coats of epoxy paint as per Drawing Clause 1701 and Annexure 1700.1.
1
16678
16678
... More
Providing and Fixing 'Citizens' Information Board' of PMGSY / Bharat Nirman Project
-
-
-
... More
Providing and fixing typical “Citizen’s information Board” with Logo of PMGSY as per NRRDA Specifications and Drawing having two nos. MS plate of 1mm thick 900 x 750mm size each duly welded with 2 nos. vertical and 4 nos. Horizontal M.S. flat 50mm x 6mm size on back, the ends of the M.S. flats to be welded with 2x2450mm x 1150mm frame of M.S. square posts to be embedded in cement concrete M-15 grade of 600mm x 600mm size and 750mm below the ground level and keeping 50mm height above the ground level, two coats of epoxy painting MS square , flats and backside of the the M.S. sheets with a coat of primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of epoxy coated priming on rear side of the M.S. plates with bands and lettering of different approved shades as directed shown in the approved design with oil bound ready mixed synthetic paint and providing 70mm x 70mm size PMGSY Logo.
2
16678
33357
... More
Construction of 5th Kilometre Stone (Precast) : Reinforced cement concrete M15 grade kilometre stone / local stone of standard design as per IRC:8 fixing in position including painting and printing, etc. as per drawing and Technical Specification Clause 1703.
i) 5th Kilometre Stone(precast)
1
5991
5992
... More
Construction of Ordinary Kilometre Stone (Precast) : Reinforced cement concrete M 15 grade ordinary Kilometre stone with local stone of standard design as per IRC : 8 fixingin in position including painting and printing etc. as per drawing and technical specification clause 1703.
8
3742
29940
... More
Construction of 200 Metre Stone (Precast) : Reinforced cement concrete M 15 grade 200 metre stone with local stone of standard design as per IRC : 8 fixingin in position including painting and printing etc. as per drawing and technical specification clause 1703.
28
951
26645
... More
Boundary Pilar: Reinforced cement concrete M 15 grade Boundary pillars / local stone of standard design as per IRC : 25 fixed in position including finishing and lettering but excluding painting as per drawing and technical specification clause 1704.
74
839
62096
... More
Trapezoidal drain
-
-
-
... More
Trapezoidal drain ( top clear width 600 mm, bottom clear width 300 mm and clear depth of 400 mm
262
3594
941811
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
2507.22
482
1208731
... More
Providing Concrete (M-15) for Plain Concrete in open foundations complete as per drawing and Technical specification clause 802, 803, 1202,& 1203
94.29
10839
1022085
... More
Laying (Type A) concrete cradle bedding with M15 grade cement concrete as per Clause 1105 (i)
73.23
10839
793799
... More
Plain/Reinforced cement concrete (M-25) in open foundation complete as per drawing and technical specification including steel shuttering formwork.
131.41
12224
1606416
... More
Brick masonry work in cement mortar in substructure complete excepting pointing & plastering, as per drawing & technical specification Clauses 602, 603, 604, 1202 and 1204 ( In 1:4 cement mortar)
204
8982
1832491
... More
Providing weepholes in brick masonry/stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or PVC pipe ( 110 mm OD of 6.0 Kg/cm2 pressure ) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7
116
329
38207
... More
Plain/reinforced cement concrete in substructure complete including formwork as per drawings & technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204.
P.C.C grade M20 (1:2:4)(Nominal mix)
i) upto 5 m height
28.14
9699
272957
... More
Providing and Laying reinforced cement concrete pipe NP3 with collar for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling , concrete and masonry works in head walls and parapets Clause 1106.
(B) 1000 mm Diameter
7.5
13374
100310
... More
Plain/reinforced cement concrete (M-20) in substructure complete including formwork as per drawings & technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204.
53.2
12012
639077
... More
Providing & laying reinforced cement concrete (M-25) in superstructure as per drawings & technical specifications Clauses 800, 900, 1205.4 & 1205.5
1) For height upto 5 m.
14.91
14667
218696
... More
Reinforcement in Super Structure: Supplying, fitting and placing TMT conforming to IS:1786 Fe500D reinforcement in super-structure including splicing complete as per drawing and technical specifications
TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)
16.84
93739
1578570
... More
Supplying, fitting and placing TMT IS:1786 Fe500D bar reinforcement in foundation complete as per drawing and technical specifications
TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)
13.14
91762
1205764
... More
Plain/Reinforced cement concrete (M-25), in substructure complete as per drawing and technical specification and steel shuttering formwork
143.14
12834
1837067
... More
Supplying, fitting and placing TMT IS:1786 (Fe500) bar reinforcement in sub-structure complete as per drawing and technical specifications
TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)
17.18
92017
1580867
... More
Providing & laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8
47.19
4650
219437
... More
Furnishing and Placing Reinforced / Prestressed cement concrete (M-30) in super-structure as per drawing and Technical Specification including steel shuttering formwork.
106.95
13870
1483433
... More
Drainage spouts complete as per drawing and Technical specification
8
1550
12403
... More
Burried Joint (Providing and laying a burried expansion joint, expansion gap being 20 mm, covered with 12 mm thick, 200 mm wide galvanised weldable structural steel plate as per IS: 2062, placed symmetrical to centre line of the joint, resting freely over the top surface of the deck concrete, welding of 8 mm dia. 100 mm long galvanised nails spaced 300 mm c/c along the centre line of the plate, all as per drawings and MoRT&H Technical Specification Clause 2604.)
34
2089
71057
... More
Printing New Lettering and Figures of any Shade Printing new letter any figures of any shade with synthetic enamle paint black or any other approved colour to give an even as per drawings and technical specification clause 1701
ii) English and Roman
80
-
64
... More
Repairing
-
-
-
... More
Applying priming coat (payment shall be made after submission of test certificate issued by the manufacturer) (i) with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, gravanised iron / steel work.
1212.31
26
32490
... More
Painting with synthetic enamel paint (two or more coats) of required colour of approved brand and manufacture on new work to give an even shade including cost of materials required and as per clauses of chapter-13 of CPWD specification.
1212.31
73
89590
... More
Maintenance of Slab Type Culverts by way of clearing, cleaning, erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification 1908
5
5512
27560
... More
Maintenance
-
-
-
... More
Total for 1st year maintenance (including 18% GST)
7.19
82683
594822
... More
Total for 2nd year maintenance (including 18% GST)
7.19
89239
641985
... More
Total for 3rd year maintenance (including 18% GST)
7.19
179754
1293150
... More
Total for 4th year maintenance (including 18% GST)
7.19
207254
1490985
... More
Total for 5th year maintenance (including 18% GST)
7.19
213992
1539458
... More
4.NH-208 to Anand Bandhu Para (NH-208) via Gunamani Para, Sukanta Palli, Netaji Palli, Silachari HS School and Selaong Mog Para (Package No-TR-06-11P3) (Length= 5204 M) under Silachari block.
-
-
-
... More
Clearing and grubbing road land
-
-
-
... More
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and of serviceable material to be used or auctioned upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification Clause 201.
1.29
32867
42400
... More
Dismantling Work in existing Culverts
-
-
-
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.
-
-
-
... More
i) PCC
54.47
667
36370
... More
ii) RCC in Superstructure
164.22
1892
310770
... More
Removal of Hume Pipes
-
-
-
... More
Removing all types of Hume pipes and stacking within a lead of 1000m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202 of Specification of Rural Roads.
-
-
-
... More
Above 900 mm dia Hume pipe
5
724
3622
... More
Excavation in Cutting in soil by manual means with lead upto 50 m. Excavation in Roadway cutting in soil by using manual means and carrying of cut earth to embankment site with all lifts and lead upto 50 m as per Technical Specification Clause 302.3
1265
226
285890
... More
Construction of Embankment with Material Obtained from Roadway Cutting
-
-
-
... More
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5
1265
66
84502
... More
Construction of Embankment with Materials obtained from Borrow pits
-
-
-
... More
Construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5
5958
219
1307185
... More
For embankment work
-
-
-
... More
Construction of Subgrade and Earthen Shoulders
-
-
-
... More
Construction of subgrade and earhen shoulders With approved materials obtained from borrow pits with all Lifts and leads, transporting to site, spreding, grading to required slope and compacted to meet requirement of Table 300.2 with as per Technical Specification clauses 303.1
-
-
-
... More
For Subgrade and Earthen Shoulders
2879
199
574648
... More
Stabilised Base with FDR
-
-
-
... More
Stabilization of in-situ (existing pavement crust) or soil or otherwise sub base/ base course up to the required depth by cold in-situ recycling using cement and chemical additives / otherwise: Providing pulverizing, spreading, milling and mixing of chemical additives at the appropriate rate as per job mix design in accordance with IRC-SP-72-2015 , IRC-37-2012 & 2018 and IRC SP 89 (part II) 2018. Cementitious additive @ rate of minimum 4 - 6% and CCS/CS additive should be spread on the existing pavement using a mobile truck mounted containerized cement/ additive spreader with micro processor controlled weighing and spreading system. The additive spreader shall have variable working width sufficient to cover whole pavement lane. The in-situ stabilization process shall be carried out by a mobile and self propelled stabilizer / reclaimer of working width of 2.4 m and with minimum engine horse power of 440 kw with a variable working depth up to 50 cm. The resultant stabilized mix then would be profiled to the required grade, level and thickness using motor grader and the mix would be compacted using 20 tonne pad foot roller in combination with smooth wheel roller to achieve desired proctor density as per IRC 37-2012 & 2018 and complete in all respect and curing with water as required including all materials, labour and machinery etc. The entire in-situ process would be carried out in single pass with milling and pulverising of damaged asphalt pavement / soil/ aggregates / soil-aggregate mixture to the desired depth and with simultaneous addition of additives and water with machine integrated spray bars fitted on the wheeled self-propelled and vibratory pad foot roller to achieve the desired proctor density in all respects. The tandem roller be followed by Pneumatic Tyre Roller. The minimum unconfined compressive strength (UCS) of stabilized sub base/ base should be 4.5 to 7 MPa after 7 / 28 days of curing as per IRC-SP-72-2015 , IRC-37-2012 & 2018 . Also durability aspects (wet-dry cycles) of stabilized sub base should be satisfied as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The gradation mixes and materials should be as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The train of equipment's to be used are binder spreader- water Tanker- Additive Truck- Recycler- Padfoot Roller (20 Tonne) + Single Drum Compactor- Grader- Tandom Roller- Pneumatic Tyre Roller (20 Tonne)
4169.07
3828
15959200
... More
Granular Sub-base with Well Graded Material ( Table 400.1 ) using Jhama Brick Aggregate
-
-
-
... More
(A) By Mix in Place Method
-
-
-
... More
Construction of granular sub-base by providing well graded material ( Jhama Brick Aggregate , as per Table 400.1 ), spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
243.2
6080
1478656
... More
Prime coat
-
-
-
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
20069.31
47
959112
... More
Tack coat
-
-
-
... More
Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503
20069.31
15
320908
... More
Mix Seal Surfacing
-
-
-
... More
Providing , laying and rolling of close-graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.9 mm ( Type-A ) or 13.2 mm to 0.9 mm (Type-B) aggregates using viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller , finishing to required level and grades as per Technical Specification Clause 509.
20069.31
363
7303222
... More
Open-graded premix carpet
-
-
-
... More
Providing , laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per Technical Specification Clause 508
112.5
288
32411
... More
Seal Coat (Type D)
-
-
-
... More
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per Technical Specification Clause 510
112.5
81
9141
... More
Provision of 15 nos. rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint.
191.25
91
17409
... More
Chevron Signs at Bend
91
2414
219690
... More
Chevron Signs at Sharp Bend(double)
20
2414
48284
... More
Providing and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings and as per MoRT&H Technical Specification Clause 805
28
568
15904
... More
Traffic Signs
-
-
-
... More
Semi Reflective Traffic Signs: Providing and fixing of Semi Reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS Sheet duly stove white colour in front and grey colour in black with red reflective border of 65mm width and required letter and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm x12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x450x600mm, 600mm below ground level as per approved drawing clause 1701.2.2.
-
-
-
... More
with 600 mm equilateral triangle MS sheeting
88
2414
212448
... More
with 600 mm circular MS sheeting
67
2495
167217
... More
with 600 mm x 600 mm square MS sheeting
3
2545
7636
... More
Semi Reflective Direction & Place Identification Sign: Providing and erecting direction and place identification of semi reflective sign board as per IRC: 67 made of 2mmThick M.S sheet duly stove enameled Paint white colour in front and grey colour in back with reflective border of 70mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specification of required shade and colour. Supported and welded on two nos. 47mm x 47mm of 12 SWG square tube of 3050mm height duly strengthened by 25mm x 5mm MS flat iron on edges on back firmly fixed to the ground by means of property design foundation with M – 15 grade cement concrete 450mm x 450mm x 600mm below ground level as per provided drawing and technical specification clause 1701.
1
3483
3483
... More
Pedestrian Crossing Markings: Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ color using hot thermoplastic material including reflectorising glass beads @ 250 gms per sqm area by fully / semi automatic thermoplast paint applicator machine fitted profile shoe, glass beads dispenser, propane tank heater and profile shoe heater including cost of cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per MoRT&H Technical Specification Clause 803
42
731
30702
... More
Painting lines, Dashes ,Arroes,etc. on Road in Two Coats on New Work: Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702
1535.25
158
243030
... More
PMGSY Informatory Sign Board with Logo
-
-
-
... More
Providing and fixing of typical PMGSY Informatory Sign Board with Logo as per MORD Specifications and Drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lowermost frame and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The topmost diamond plate will be welded to the middle plate 47mm x47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of frame post and steel tube will be painted with primer and two coats of epoxy paint as per Drawing Clause 1701 and Annexure 1700.1.
-
-
-
... More
Providing and Fixing 'Logo' of PMGSY Project
1
12871
12872
... More
(ii) Logo Board (As per fig. 5 of Road signage under PMGSY published by the NRRDA on Dec'06)
3
3158
9476
... More
Logo of Maintenance Board: Providing and fixing of typical PMGSY Informatory Sign Board with Logo as per MORD Specifications and Drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lowermost frame and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The topmost diamond plate will be welded to the middle plate 47mm x47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of frame post and steel tube will be painted with primer and two coats of epoxy paint as per Drawing Clause 1701 and Annexure 1700.1.
1
16695
16695
... More
Providing and Fixing 'Citizens' Information Board' of PMGSY / Bharat Nirman Project
-
-
-
... More
Providing and fixing typical “Citizen’s information Board” with Logo of PMGSY as per NRRDA Specifications and Drawing having two nos. MS plate of 1mm thick 900 x 750mm size each duly welded with 2 nos. vertical and 4 nos. Horizontal M.S. flat 50mm x 6mm size on back, the ends of the M.S. flats to be welded with 2x2450mm x 1150mm frame of M.S. square posts to be embedded in cement concrete M-15 grade of 600mm x 600mm size and 750mm below the ground level and keeping 50mm height above the ground level, two coats of epoxy painting MS square , flats and backside of the the M.S. sheets with a coat of primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of epoxy coated priming on rear side of the M.S. plates with bands and lettering of different approved shades as directed shown in the approved design with oil bound ready mixed synthetic paint and providing 70mm x 70mm size PMGSY Logo.
2
16695
33390
... More
Construction of 5th Kilometre Stone (Precast) : Reinforced cement concrete M15 grade kilometre stone / local stone of standard design as per IRC:8 fixing in position including painting and printing, etc. as per drawing and Technical Specification Clause 1703.
i) 5th Kilometre Stone(precast)
1
6004
6004
... More
Construction of Ordinary Kilometre Stone (Precast) : Reinforced cement concrete M 15 grade ordinary Kilometre stone with local stone of standard design as per IRC : 8 fixingin in position including painting and printing etc. as per drawing and technical specification clause 1703.
6
3748
22493
... More
Construction of 200 Metre Stone (Precast) : Reinforced cement concrete M 15 grade 200 metre stone with local stone of standard design as per IRC : 8 fixingin in position including painting and printing etc. as per drawing and technical specification clause 1703.
21
953
20017
... More
Boundary Pilar: Reinforced cement concrete M 15 grade Boundary pillars / local stone of standard design as per IRC : 25 fixed in position including finishing and lettering but excluding painting as per drawing and technical specification clause 1704.
56
840
47075
... More
Trapezoidal drain
-
-
-
... More
Trapezoidal drain ( top clear width 600 mm, bottom clear width 300 mm and clear depth of 400 mm
150
3692
553892
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
522.06
482
251685
... More
Providing Concrete (M-15) for Plain Concrete in open foundations complete as per drawing and Technical specification clause 802, 803, 1202,& 1203
52.24
10898
569336
... More
Brick masonry work in cement mortar in substructure complete excepting pointing & plastering, as per drawing & technical specification Clauses 602, 603, 604, 1202 and 1204 ( In 1:4 cement mortar)
370
9428
3488404
... More
Laying (Type A) concrete cradle bedding with M15 grade cement concrete as per Clause 1105 (i)
73.57
10898
801800
... More
Plain/reinforced cement concrete in substructure complete including formwork as per drawings & technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204.
P.C.C grade M20 (1:2:4)(Nominal mix)
i) upto 5 m height
28.24
9730
274791
... More
Providing and Laying reinforced cement concrete pipe NP3 with collar for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling , concrete and masonry works in head walls and parapets Clause 1106.
(B) 1000 mm Diameter
7.5
13348
100117
... More
Plain/reinforced cement concrete (M-20) in substructure complete including formwork as per drawings & technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204.
54.05
12073
652595
... More
Providing & laying reinforced cement concrete (M-25) in superstructure as per drawings & technical specifications Clauses 800, 900, 1205.4 & 1205.5
1) For height upto 5 m.
15.88
14732
233959
... More
Supplying, fitting, & placing HYSD bar reinforcement in superstructure complete as per drawing & technical specifications Clauses 1002, 1010 & 1202
5.43
93774
509193
... More
Providing weepholes in brick masonry/stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or PVC pipe ( 110 mm OD of 6.0 Kg/cm2 pressure ) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7
73
329
24054
... More
Plain/Reinforced cement concrete (M-25) in open foundation complete as per drawing and technical specification including steel shuttering formwork.
47
12289
577612
... More
Supplying, fitting and placing TMT IS:1786 Fe500D bar reinforcement in foundation complete as per drawing and technical specifications
TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)
4
91797
367191
... More
Plain/Reinforced cement concrete (M-25), in substructure complete as per drawing and technical specification and steel shuttering formwork
52
12899
670759
... More
Supplying, fitting and placing TMT IS:1786 (Fe500) bar reinforcement in sub-structure complete as per drawing and technical specifications
TMT-IS1786 (Fe-500D) Primary Producer (TATA /SAIL /EsserSteel/ Jindal panther steel/ Shyam steel or equivalent)
5
92052
460263
... More
Furnishing and Placing Reinforced / Prestressed cement concrete (M-30) in super-structure as per drawing and Technical Specification including steel shuttering formwork.
33
13972
461083
... More
Drainage spouts complete as per drawing and Technical specification
4
1586
6346
... More
Burried Joint (Providing and laying a burried expansion joint, expansion gap being 20 mm, covered with 12 mm thick, 200 mm wide galvanised weldable structural steel plate as per IS: 2062, placed symmetrical to centre line of the joint, resting freely over the top surface of the deck concrete, welding of 8 mm dia. 100 mm long galvanised nails spaced 300 mm c/c along the centre line of the plate, all as per drawings and MoRT&H Technical Specification Clause 2604.)
15
2089
31349
... More
Printing New Lettering and Figures of any Shade Printing new letter any figures of any shade with synthetic enamle paint black or any other approved colour to give an even as per drawings and technical specification clause 1701
ii) English and Roman
40
-
32
... More
Maintenance
-
-
-
... More
Total for 1st year maintenance (including 18% GST)
5.2
82683
430282
... More
Total for 2nd year maintenance (including 18% GST)
5.2
89239
464400
... More
Total for 3rd year maintenance (including 18% GST)
5.2
179754
935440
... More
Total for 4th year maintenance (including 18% GST)
5.2
207254
1078550
... More
Total for 5th year maintenance (including 18% GST)
5.2
213992
1113614
... More
5.NH-208 to Jatan Bari Chipling Chera(SH) via Jariham Para. (Length= 8.9km). Block- Karbook.
-
-
-
... More
Clearing and grubbing road land
-
-
-
... More
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and of serviceable material to be used or auctioned upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification Clause 201.
2.67
32867
87757
... More
Cutting of Trees, including Cutting of Trunks , Branches and Removal of Stumps
Cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per Technical Specification Clause 201.
-
-
-
... More
Girth above 300 mm to 600 mm
26
382
9950
... More
Girth above 600 mm to 900 mm
32
605
19379
... More
Construction of Subgrade and Earthen Shoulders
-
-
-
... More
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site , spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1.
3002.74
199
599347
... More
Construction of Embankment with Material Obtained from Roadway Cutting
-
-
-
... More
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 of Specifications for Rural Roads (1st Revision).
For spreading beyond 100 m
3713.23
66
248044
... More
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 of Specifications for Rural Roads (1st Revision).
For spreading within 100 m
8664.21
48
421947
... More
Stabilised Base wit FDR
-
-
-
... More
Stabilization of in-situ (existing pavement crust) or soil or otherwise sub base/ base course up to the required depth by cold in-situ recycling using cement and chemical additives / otherwise: Providing pulverizing, spreading, milling and mixing of chemical additives at the appropriate rate as per job mix design in accordance with IRC-SP-72-2015 , IRC-37-2012 & 2018 and IRC SP 89 (part II) 2018. Cementitious additive @ rate of minimum 4 - 6% and CCS/CS additive should be spread on the existing pavement using a mobile truck mounted containerized cement/ additive spreader with micro processor controlled weighing and spreading system. The additive spreader shall have variable working width sufficient to cover whole pavement lane. The in-situ stabilization process shall be carried out by a mobile and self propelled stabilizer / reclaimer of working width of 2.4 m and with minimum engine horse power of 440 kw with a variable working depth up to 50 cm. The resultant stabilized mix then would be profiled to the required grade, level and thickness using motor grader and the mix would be compacted using 20 tonne pad foot roller in combination with smooth wheel roller to achieve desired proctor density as per IRC 37-2012 & 2018 and complete in all respect and curing with water as required including all materials, labour and machinery etc. The entire in-situ process would be carried out in single pass with milling and pulverising of damaged asphalt pavement / soil/ aggregates / soil-aggregate mixture to the desired depth and with simultaneous addition of additives and water with machine integrated spray bars fitted on the wheeled self-propelled and vibratory pad foot roller to achieve the desired proctor density in all respects. The tandem roller be followed by Pneumatic Tyre Roller. The minimum unconfined compressive strength (UCS) of stabilized sub base/ base should be 4.5 to 7 MPa after 7 / 28 days of curing as per IRC-SP-72-2015 , IRC-37-2012 & 2018 . Also durability aspects (wet-dry cycles) of stabilized sub base should be satisfied as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The gradation mixes and materials should be as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The train of equipment's to be used are binder spreader- water Tanker- Additive Truck- Recycler- Padfoot Roller (20 Tonne) + Single Drum Compactor- Grader- Tandom Roller- Pneumatic Tyre Roller (20 Tonne)
7434.88
3828
28460721
... More
Granular Sub-base with Well Graded Material ( Table 400.1 ) using Jhama Brick Aggregate
-
-
-
... More
(A) By Mix in Place Method
-
-
-
... More
Construction of granular sub-base by providing well graded material ( Jhama Brick Aggregate , as per Table 400.1 ), spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
839.48
6059
5086527
... More
Prime Coat with Bitumen Emulsion
-
-
-
... More
Low porosity - Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
-
-
-
... More
Total quantity
34042.5
47
1617359
... More
Tack Coat with Bitumen Emulsion
-
-
-
... More
(ii) Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503
-
-
-
... More
Total quantity
34042.5
16
545361
... More
25 mm thick Mix Seal Surfacing
-
-
-
... More
Providing , laying and rolling of close-graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.9 mm ( Type-A ) or 13.2 mm to 0.9 mm (Type-B) aggregates using viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller , finishing to required level and grades as per Technical Specification Clause 509. By Mechanical Means
Type-B Bitumen VG-30
-
-
-
... More
Total quantity
34042.5
346
11782109
... More
Brick Masonry Retaining-Wall(Height-2meter)
-
-
-
... More
Excavation for Structures
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
upto 3m depth
234
482
112811
... More
P.C.C grade M 15 ( using jhama brick aggregate )
Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & technical specifications Clauses 802, 803, 900, 1202 and 1203.
342
8690
2972120
... More
Providing weepholes in brick masonry/stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or PVC pipe ( 110 mm OD of 6.0 Kg/cm2 pressure ) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7.
300
328
98580
... More
Filling in foundation trenches as per drawing & technical specification Clause 305.3.9
I) Sand filling
27
2127
57455
... More
Construction of road side pucca drain with M10 ( 1:3:6 with jhama brick aggregate) to specified lines, grades, levels and dimensions as per approved design and Technical Specification Clause 307, 1606. Excavated material to be used in embankment at site.
Trapezoidal drain ( top clear width 600 mm, bottom clear width 300 mm and clear depth of 600 mm
(a) In Ordinary Soil
550
3165
1741190
... More
Box culvert
-
-
-
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
i) in ordinary soil
152.06
306
46637
... More
Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & technical specifications Clauses 802, 803, 900, 1202 and 1203.
-
-
-
... More
Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & technical specifications Clauses 802, 803, 900, 1202 and 1203. P.C.C grade M 15 ( using jhama brick aggregate ) i)Nominal mix (1:2.5:5)
14.38
8530
122675
... More
Brick masorny work in cement mortar in foundation completed excluding pointing & plastering as per drawing & technical specifications Clauses 600, 1202 & 1203.
-
-
-
... More
Brick masorny work in cement mortar in foundation completed excluding pointing & plastering as per drawing & technical specifications Clauses 600, 1202 & 1203. ii) Brick masonry in 1:4 cement mortar
32.82
8825
289650
... More
Brick masonry work in cement mortar in substructure complete excepting pointing & plastering, as per drawing & technical specification Clauses 602, 603, 604, 1202 and 1204 ii) In 1:4 cement mortar
16.36
9207
150638
... More
Pointing with cement mortar (1:3) on brickwork as per drawing & technical specification Clauses 613.3 & 1204
2.47
104
258
... More
Providing and laying reinforced cement concrete in superstructure for height upto 5m with coarse aggregates of appropriate nominal sizes and grading including screening and cleaning, fine aggregate (sand) conforming to proper grading zone, both of approved quality, cement and water reducing admixtures, as necessary and mixing in concrete mixwe of suitable capacity and cost of curing with water, including labour, including preparation of dsign mix approved of the same by the Engineer in charge, cost for quality control, sampling, testing etc. including cost of form work and staging upto 5m but excluding reinforcement complete as per drawings as per drawing and technical specifications Clauses 800, 1401.4.1 and 1401.4.3 of Specification for Rural Roads, MORD.
-
-
-
... More
II) R.C.C grade M 25 (Design Mix) Plain/reinforced cement concrete in substructure complete including formwork as per drawings & technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. VI)R.C.C grade M-25 i)upto 5 m height
19.59
11542
226108
... More
Providing & laying reinforced cement concrete (using fine sand) in superstructure as per drawings & technical specifications Clauses 800, 900, 1205.4 & 1205.5 RCC Grade M-25 Mix-
For height upto 5 m
9.21
12519
115307
... More
Providing PCC M 20 (with jhama brick aggregate) architectural coping on the top of wing wall, return wall etc. complete including formwork as per drawing & technical specification Clauses 615, 710 & 1204.3.11
17.08
944
16125
... More
Supplying, fitting, & placing HYSD bar reinforcement in superstructure complete as per drawing & technical specifications Clauses 1002, 1010 & 1202
(@ 100 kg/cum of RCC)
0.92
93680
86186
... More
Supplying,fitting, and placing HYSD bar reinforcement in superstructure including cost of steel materials and carriage, including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1mm in size and conforming to IS:280 at every intersection, hooked and bent to correct shape and place on forms etc. including cost of black annealed wire and cost of loading, unloading of all steel materials complete as per drawing and technical specifications Clauses 1002, 1006 and 1202 of Specification for Rural Roads, MORD.
2.24
91959
205989
... More
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards outward face complete as per drawing and technical specification Clauses 614, 709, 1206.3 of Specification for rural Roads including curing complete.
90
328
29574
... More
Backfilling behind abutment, wing wall & return wall complete as per drawings & technical specification Clause 1204.3.8 II) Sandy material
68.98
2473
170619
... More
Providing & laying filter media with jhama brick aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8
32.56
4122
134242
... More
Providing and fixing in position Drainage spouts complete as per drawing & technical specifications Clause 1209
4
1548
6195
... More
Providing bituminous wearing coat comprising of 20 mm thick premix carpet with seal coat Type D (with fine sand ) for culverts as per drawing & technical specifications Clauses 1206.2 and 500
2.34
367
860
... More
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per Technical Specification Clause 510
31.2
53
1678
... More
PMGSY Informatory Sign Board with Logo
-
-
-
... More
Providing and fixing of typical PMGSY "Logo board/Logo Board at starting point" as per drawing and specifications of NRRDA having 1.6 mm thick 2 nos. 600 x 600 mm MS Sheet and 1.6 mm thick 2 nos. 1100 x 300 mm MS plate facing both sides of the alignment duly welded all Board with vertical square Post and 2 nos horizontal MS flats on back, embedding leg of MS square post of 75mm x 75mm of 12 SWG sheet in M-15 grade cement concrete 600 mm square size and 750 mm below the ground level and keeping 50mm height above the ground level, two coats of Epoxy painting on MS square flats and back side of the MS sheets over a coat of primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of Epoxy coated priming of rearside of the MS plates with Bands and letterings of different shades and sizes as directed and specified in the approved design with oil bound ready mixed synthetic paint complete in all respect.
The rate of each Board is inclusive of M.S square, M.S flats, M.S plates, all labour, fabricating and welding charges, cost of paintings and primer, cost of carriage & fixing and all other incidental charges in this regard complete in all respect maintaining line and level as directed by the Engineer-in-Charge including cost of protection, barricading and lighting etc.
-
-
-
... More
(i) Logo Board at starting point (As per fig. 107 of Road signage under PMGSY published by the NRRDA on Dec'06)
4
12508
50033
... More
Providing and fixing 'Logo' of PMGSY Project
-
-
-
... More
Logo of PMGSY Project: Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
Using 0.252 cum M-15 Cement Concrete
3
12508
37525
... More
Providing and fixing "Citizen's Information Board" for PMGSY Project
-
-
-
... More
Providing and fixing typical "Citizen's Information Board" with Logo of PMGSY as per NRRDA Specifications and drawing having two nos MS sheet of 1.6 mm thick 900mm x 750mm size each duly welded with 2 Nos. vertical and 4 Nos. horizontal M.S. flat 50 mm x 6mm size on back. The ends of the M.S. flats to be welded with 2 x 2450 mm x 1150mm frame of M.S square 75mm x 75mm of 12 SWG sheet, two legs of M.S. square posts to be embedded in cement concrete M-15 grade of 600 mm x 600 mm size and 750 mm below the ground level and keeping 50 mm height above the ground level, two coats of Epoxy painting on MS square, flats and backside of the M.S. sheets with a coat of local primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of Epoxy coated priming on rearside of the M.S plates with Bands and lettering of different approved shades as directed as shown in the approved design with oil bound ready mixed synthetic paint and providing 70 mm x 70 mm size PMGSY Logo. The rate of each Board is inclusive of M.S square, M.S flats, M.S plates, cost of M-15 Cement Concrete, all labour and welding charges, cost of all paintings and primer, Cost of Carriage & fixing and all other incidental charges in this regard to complete in all respect maintaining line and level as directed by the Engineer-in-Charge including cost of protection, barricading, lighting etc.
Construction wing will add cost of 0.54 cum M -15 cement concrete for arriving at complete rate of each Board.
3
16627
49883
... More
Kilometre Stone
-
-
-
... More
Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 of Specification for Rural Roads (1st Revision).
-
-
-
... More
i) 5th Kilometre Stone (Precast) : Construction wing will add cost of 0.392 cum M-15 Cement Concrete and 3.68 Kg of Steel reinforcement for each post
1
5439
5439
... More
ii) Ordinary Kilometre Stone (Precast) : Construction wing will add cost of 0.269 cum M-15 Cement Concrete and 1.88 Kg of Steel reinforcement
8
3387
27100
... More
iii) 200 Metre Stone (Precast) :
Construction wing will add cost of 0.048 cum M-15 Cement Concrete and 2.00 Kg of Steel reinforcement
36
883
31819
... More
Boundary Pillar : Supplying, fitting and fixing boundary pillar as per type design IRC:25 with cement concrete 1:2:4 with stone chips including cost of providing 2 nos. of 6mm dia M.S. rods of length 1.84m in the form of inverted U-shape as main reinforcements placed crosswise to each uther and 5nos. of round shaped 6mm dia M.S. rods used as binder, the placing of 1st binder should be at 75mm below the top finished suface and the other 4 nos. of binders should be placed at 1.85mm c/c and to be 90cm long with 20cm dia at the base tapering to 15cm dia at the top with head properly round and sunk inscriptions (as directed) at the side with 60cm embedment into the ground after making hole in the ground of size 50cmx50cmx75cm and repacking the hole properly with cement concrete 1:4:8 with stone chips anf finishing the exposed portion of 30cm length with white wash & painting the inscriptio as directed including the carriage of the post to the site with loading & unloading etc. complete in all respect as per drawing and Technical Specification Clause 1704 of Specification for Rural Roads (1st Revision).
Construction wing will add cost of 0.022 cum M-15 Cement Concrete and 1.40 Kg of Steel reinforcement
180
824
148342
... More
Providing and fixing typical "Maintenance Information Board" for PMGSY Providing and fixing typical "Maintenance Information Board" with Logo of PMGSY as per NRRDA Specifications and drawing having one nos MS sheet of 1.6 mm thick 900mm x 1500mm size duly welded with 4 Nos. vertical and 8 Nos. horizontal M.S. flat 50 mm x 6mm size on back. The ends of the M.S.flats to be welded with 2 x 2450 mm x 1150mm frame of M.S square 75mm x 75mm of 12 SWG sheet, two legs of M.S.square posts to be embedded in cement concrete M-15 grade of 600 mm x 600 mm size and 750 mm below the ground level and keeping 50 mm height above the ground level, two coats of Epoxy painting on MS square, flats and backside of the M.S. sheets with a coat of primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of Epoxy coated priming on rearside of the M.S plates with Bands and lettering of different approved shades as directed as shown in the approved design with oil bound ready mixed synthetic paint and providing 70 mm x 70 mm size PMGSY Logo 2 nos.
The rate of each Board is inclusive of M.S square, M.S flats, M.S plates, cost of M-15 Cement Concrete, all labour and welding charges, cost of all paintings and primer, Cost of Carriage & fixing and all other incidental charges in this regard to complete in all respect maintaining line and level as directed by the Engineer-in-Charge including cost of protection, barricading, lighting etc.
1
12508
12508
... More
Rumble strips
-
-
-
... More
Providing Rumble Strip covered with premixed bituminous carpet 20mm high at centre followed by Type B Seal Coat 250 mm wide each and placed 1 m centre to centre at approved location to control speed, marked with 30 cms. Wide white strips of Road marking paint placed 60 cms. centre to centre along the alignment. Using 20 mm premix carpet and Type B Seal coat for 0.26 sqm.
70.69
90
6418
... More
Guard Post
-
-
-
... More
Supplying, Fitting, and Fixing R.C. Guard Post: 1.37m long with cement concrete 1:2:4 with graded stone chips of 13.2mm down casting curing complete including cost of providing 4 nos of 12mm dia MS road of length 1.54m as main reinforcement and 6 nos of round shaped 6mm dia MS rods used as binders; the placing of the 1st binder should be at 75mm below the top finished surface and the other 5 nos of binders should be placed at 245 mm C/C ; the guard post is of octagonal section with inscribed circle of diameter 24cm at the base tapering to corresponding dimensions of 16cm at the top including 2 coats of painting with best quality synthetic enamel paint of approved make and brand to form 6 nos horizontal alternate brands in white/ tannery yellow and black to 90cm. length standing up above ground after mending good damages if any during sinking of shuttering, making hole in ground of 47cm depth and 30cm minimum dia, fixing the guard post in the same hole and replacing the earth thoroughly so as to keep the guard post standing properly erect in correct position true in line and length including carriage of R.C. guard post from stack yard to the site including loading into the truck and unloading at site complete in all respects.
96
541
51978
... More
Traffic Signs
-
-
-
... More
Retero Reflective Traffic Signs:Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove, white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm x 12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 x 450 x 600mm, 600mm below ground level as per approved drawing Clause 1701.2.2.
-
-
-
... More
a) 600 mm Equilateral Triangle
156
2673
417099
... More
b) 600 mm Circular
300
2787
836133
... More
c) 600 mm x 600 mm Square
72
2855
205618
... More
Direction and Place Identification Signs with size more than 0.9 sqm size board
-
-
-
... More
Retero-Reflective Traffic signs : Providing and erecting direction and place identification of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and require message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47mm x 47mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 and annexure 1700.1 of Specification for Rural Roads.
20
4488
89760
... More
Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work
-
-
-
... More
(ii) Up to 10 cm in width - Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Reference to MORT&H's specification 803).
1780
158
281774
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic
compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per Clause 803 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
890
731
650590
... More
Maintenance
-
-
-
... More
Total for 1st year maintenance (including 18% GST)
8.9
82683
735879
... More
Total for 2nd year maintenance (including 18% GST)
8.9
89239
794227
... More
Total for 3rd year maintenance (including 18% GST)
8.9
179754
1599811
... More
Total for 4th year maintenance (including 18% GST)
8.9
207254
1844561
... More
Total for 5th year maintenance (including 18% GST)
8.9
213992
1904529
... More
● The upgradtion cost is inclusive of GST @ 18% and ● Maintenance amount is pre-specified by the authority as mentioned above.
-
-
401319045
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%