Pradhan Mantri Gram Sadak Yojana Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Costs
EMD
₹ 37,60,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SQCEO_136361_1Bid Award Id
ViewTender No
TR0609P3Tender Authority
Pradhan Mantri Gram Sadak Yojana ViewPurchaser Address
-Website
http://http://omms.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Dismantling Work in existing Culverts
-
-
-
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.
By Mechanical Means
-
-
-
... More
i) PCC
104.21
64433
618.3
... More
ii) RCC in Superstructure
38.64
44374
1148.4
... More
Setting Out (As per drawing enclosed) with Reference benchmark 1 no. , working benchmark 4nos. per km and near all drainage structure and bridges and Reference Pillars on both sides of the formation width Burjes @50m interval using PCC with jhama brick aggregate for all class of soil including marking of centre line, setting out curves and recording of levels etc. by Surveyor
6
358739
59789.8
... More
Removal of Hume Pipes
-
-
-
... More
Removing all types of Hume pipes and stacking within a lead of 1000m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202 of Specification of Rural Roads.
-
-
-
... More
Above 900 mm dia Hume pipe
50
36220
724.4
... More
Dismantling of flexible pavements
-
-
-
... More
Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202.
360
366624
1018.4
... More
Excavation in Cutting in soil by manual means with lead upto 50 m. Excavation in Roadway cutting in soil by using manual means and carrying of cut earth to embankment site with all lifts and lead upto 50 m as per Technical Specification Clause 302.3
1303.5
294591
226
... More
Construction of Embankment with Material Obtained from Roadway Cutting
-
-
-
... More
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5
1303.5
87074
66.8
... More
Construction of Embankment with Materials obtained from Borrow pits
-
-
-
... More
Construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5
863
189342
219.4
... More
Construction of Subgrade and Earthen Shoulders
-
-
-
... More
Construction of subgrade and earhen shoulders With approved materials obtained from borrow pits with all Lifts and leads, transporting to site, spreding, grading to required slope and compacted to meet requirement of Table 300.2 with as per Technical Specification clauses 303.1
2002
399599
199.6
... More
Construction of GSB
-
-
-
... More
Construction of granular sub-base by providing well graded material (Jhama Brick Aggregate, as per Table 400.1), spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
(A) By Mix in Place Method (ii) For Grading - II Material ( Jhama brick aggregate )
772.21
4735578
6132.5
... More
WBM (Grading-II)
-
-
-
... More
Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.
19.69
147304
7481.15
... More
WBM (Grading-III)
-
-
-
... More
Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
19.69
147928
7512.85
... More
Wet Mix Macadam
-
-
-
... More
Providing, laying, spreading and compacting stone aggregates to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer ( Pug Mill ), carriage of mixed materials by tipper to site, laying in uniform layers in sub-base / base course on a well prepared sub-base and compacting with smooth wheel roller of three wheel 80-100 kN static roller to proper grade and camber, achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and as per Technical Specification Clause 406.
2450.33
20826433
8499.44
... More
Prime coat
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
23031.05
1103187
47.9
... More
Tack coat
Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503
23031.05
368957
16.02
... More
Mix Seal Surfacing with processed Waste Plastic (dry process)
-
-
-
... More
Providing , laying and rolling of close-graded premix surfacing of 25 mm thickness composed of 11.2 mm to 0.9 mm ( Type-A ) or 13.2 mm to 0.9 mm (Type-B) aggregates using bitumen (Bitumen VG-30) with processed Waste Plastic after shredding (to the size passing 2.36 mm sieve and retained on 600 mm sieve) @8% by weight of bituminous binder in hot aggregates (DRY PROCESS) to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades as per Technical Specification Clause 509 and IRC:SP:98-2013
By Mechanical Means Type B
23031.05
9097265
395
... More
Provision of 15 nos. rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint.
414.38
37729
91.05
... More
Chevron Signs at Bend
123
298720
2428.62
... More
Chevron Signs at Sharp Bend(double)
24
58287
2428.62
... More
Providing and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings and as per MoRT&H Technical Specification Clause 805
28
15904
568
... More
Traffic Signs
-
-
-
... More
Semi Reflective Traffic Signs: Providing and fixing of Semi Reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS Sheet duly stove white colour in front and grey colour in black with red reflective border of 65mm width and required letter and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm x12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x450x600mm, 600mm below ground level as per approved drawing clause 1701.2.2.
-
-
-
... More
with 600 mm equilateral triangle MS sheeting
65
157860
2428.62
... More
with 600 mm circular MS sheeting
39
97899
2510.22
... More
with 600 mm x 600 mm square MS sheeting
3
7679
2559.72
... More
Semi Reflective Direction & Place Identification Sign: Providing and erecting direction and place identification of semi reflective sign board as per IRC: 67 made of 2mmThick M.S sheet duly stove enameled Paint white colour in front and grey colour in back with reflective border of 70mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specification of required shade and colour. Supported and welded on two nos. 47mm x 47mm of 12 SWG square tube of 3050mm height duly strengthened by 25mm x 5mm MS flat iron on edges on back firmly fixed to the ground by means of property design foundation with M – 15 grade cement concrete 450mm x 450mm x 600mm below ground level as per provided drawing and technical specification clause 1701.
1
3502
3502.25
... More
Pedestrian Crossing Markings: Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ color using hot thermoplastic material including reflectorising glass beads @ 250 gms per sqm area by fully / semi automatic thermoplast paint applicator machine fitted profile shoe, glass beads dispenser, propane tank heater and profile shoe heater including cost of cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per MoRT&H Technical Specification Clause 803
63
46053
731
... More
Painting lines, Dashes ,Arroes,etc. on Road in Two Coats on New Work: Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702
1779.9
281758
158.3
... More
PMGSY Informatory Sign Board with Logo
-
-
-
... More
Providing and fixing of typical PMGSY Informatory Sign Board with Logo as per MORD Specifications and Drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lowermost frame and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The topmost diamond plate will be welded to the middle plate 47mm x47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of frame post and steel tube will be painted with primer and two coats of epoxy paint as per Drawing Clause 1701 and Annexure 1700.1.
-
-
-
... More
Providing and Fixing 'Logo' of PMGSY Project
1
12904
12904.27
... More
(ii) Logo Board (As per fig. 5 of Road signage under PMGSY published by the NRRDA on Dec'06)
3
9573
3191.07
... More
Logo of Maintenance Board: Providing and fixing of typical PMGSY Informatory Sign Board with Logo as per MORD Specifications and Drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lowermost frame and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The topmost diamond plate will be welded to the middle plate 47mm x47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of frame post and steel tube will be painted with primer and two coats of epoxy paint as per Drawing Clause 1701 and Annexure 1700.1.
1
16737
16736.65
... More
Providing and Fixing 'Citizens' Information Board' of PMGSY / Bharat Nirman Project
-
-
-
... More
Providing and fixing typical “Citizen’s information Board” with Logo of PMGSY as per NRRDA Specifications and Drawing having two nos. MS plate of 1mm thick 900 x 750mm size each duly welded with 2 nos. vertical and 4 nos. Horizontal M.S. flat 50mm x 6mm size on back, the ends of the M.S. flats to be welded with 2x2450mm x 1150mm frame of M.S. square posts to be embedded in cement concrete M-15 grade of 600mm x 600mm size and 750mm below the ground level and keeping 50mm height above the ground level, two coats of epoxy painting MS square , flats and backside of the the M.S. sheets with a coat of primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of epoxy coated priming on rear side of the M.S. plates with bands and lettering of different approved shades as directed shown in the approved design with oil bound ready mixed synthetic paint and providing 70mm x 70mm size PMGSY Logo.
2
33473
16736.65
... More
Construction of 5th Kilometre Stone (Precast) : Reinforced cement concrete M15 grade kilometre stone / local stone of standard design as per IRC:8 fixing in position including painting and printing, etc. as per drawing and Technical Specification Clause 1703.
i) 5th Kilometre Stone(precast)
1
5337
5337.1
... More
Construction of Ordinary Kilometre Stone (Precast) : Reinforced cement concrete M 15 grade ordinary Kilometre stone with local stone of standard design as per IRC : 8 fixingin in position including painting and printing etc. as per drawing and technical specification clause 1703.
7
23223
3317.5
... More
Construction of 200 Metre Stone (Precast) : Reinforced cement concrete M 15 grade 200 metre stone with local stone of standard design as per IRC : 8 fixingin in position including painting and printing etc. as per drawing and technical specification clause 1703.
24
20904
871
... More
Boundary Pilar: Reinforced cement concrete M 15 grade Boundary pillars / local stone of standard design as per IRC : 25 fixed in position including finishing and lettering but excluding painting as per drawing and technical specification clause 1704.
64
52397
818.7
... More
Construction of road side pucca drain with M10 (1:3:6 with jhama brick aggregates) to specified lines, grades, levels and dimensions as per approved design and Technical specification Clause 307,16,06. excavated material to be used in embankment at site
-
-
-
... More
Trapezoidal drain ( top clear width 600 mm, bottom clear width 300 mm and clear depth of 400 mm
In Ordinary soil
765
2947950
3853.53
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
331.78
159951
482.1
... More
Providing Concrete for Plain Concrete ( using jhama brick aggregate) in open foundations complete including form work as per drawing and Technical specification clause 802, 803, 900, 1202,& 1203
PCC grade M 15 ( using jhama brick aggregate)
Nominal Mix ( 1:2.5:5)
119.56
1025610
8578.2
... More
Brick masonry work in cement mortar in substructure complete excepting pointing & plastering, as per drawing & technical specification Clauses 602, 603, 604, 1202 and 1204 In 1:4 cement mortar
180
1607436
8930.2
... More
Plain cement concrete ( using jhama brick aggregate) in substructure complete including formwork as per drawings & technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204.
P.C.C grade M20 (1:2:4)(Nominal mix)
i) upto 5 m height
127.03
1250294
9842.51
... More
Providing and Laying reinforced cement concrete pipe NP3 with collar for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling , concrete and masonry works in head walls and parapets Clause 1106.
(B) 1000 mm Diameter
7.5
100988
13465.04
... More
Providing and Laying reinforced cement concrete pipe NP3 with collar for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling , concrete and masonry works in head walls and parapets Clause 1106.
(A) 1200 mm Diameter
7.5
129044
17205.84
... More
Providing & laying reinforced cement concrete in superstructure as per drawings & technical specifications Clauses 800, 900, 1205.4 & 1205.5 RCC M 25
1) For height upto 5 m.
14.07
210079
14930.96
... More
Supplying, fitting, & placing HYSD bar reinforcement in superstructure complete as per drawing & technical specifications Clauses 1002, 1010 & 1202
1.11
103580
93315.3
... More
Providing weepholes in brick masonry/stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or PVC pipe ( 110 mm OD of 6.0 Kg/cm2 pressure ) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7
25
8215
328.6
... More
Maintenance
-
-
-
... More
Total for 1st year maintenance (including 18% GST)
6
237600
39600
... More
Total for 2nd year maintenance (including 18% GST)
6
281736
46956
... More
Total for 3rd year maintenance (including 18% GST)
6
869646
144941
... More
Total for 4th year maintenance (including 18% GST)
6
1174140
195690
... More
Total for 5th year maintenance (including 18% GST)
6
1472058
245343
... More
2.South KBK Panchayat Office to Kalirai Para via Karbook CHC and Sirish Ch. Para Girls High School (Package No-TR-06-10P3) (Length= 7494 m) under Karbook block.
-
-
-
... More
Clearing and grubbing road land
-
-
-
... More
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and of serviceable material to be used or auctioned upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification Clause 201.
1.86
61134
32867.9
... More
Dismantling Work in existing Culverts
-
-
-
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.
By Mechanical Means
-
-
-
... More
i) PCC
104.21
64433
618.3
... More
ii) RCC in Superstructure
38.64
44374
1148.4
... More
Setting Out (As per drawing enclosed) with Reference benchmark 1 no. , working benchmark 4nos. per km and near all drainage structure and bridges and Reference Pillars on both sides of the formation width Burjes @50m interval using PCC with jhama brick aggregate for all class of soil including marking of centre line, setting out curves and recording of levels etc. by Surveyor
7.49
447826
59789.8
... More
Removal of Hume Pipes
-
-
-
... More
Removing all types of Hume pipes and stacking within a lead of 1000m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202 of Specification of Rural Roads.
-
-
-
... More
Above 900 mm dia Hume pipe
50
36220
724.4
... More
Dismantling of flexible pavements
-
-
-
... More
Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202.
449.64
457913
1018.4
... More
Excavation in Cutting in soil by manual means with lead upto 50 m. Excavation in Roadway cutting in soil by using manual means and carrying of cut earth to embankment site with all lifts and lead upto 50 m as per Technical Specification Clause 302.3
5839
1319614
226
... More
Construction of Embankment with Material Obtained from Roadway Cutting
-
-
-
... More
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5
3466
231529
66.8
... More
Construction of Embankment with Materials obtained from Borrow pits
-
-
-
... More
Construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5
9001
1974819
219.4
... More
Construction of Subgrade and Earthen Shoulders
-
-
-
... More
Construction of subgrade and earhen shoulders With approved materials obtained from borrow pits with all Lifts and leads, transporting to site, spreding, grading to required slope and compacted to meet requirement of Table 300.2 with as per Technical Specification clauses 303.1
4140
826344
199.6
... More
Construction of GSB
-
-
-
... More
Construction of granular sub-base by providing well graded material (Jhama Brick Aggregate, as per Table 400.1), spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
(A) By Mix in Place Method (ii) For Grading - II Material ( Jhama brick aggregate )
1072.61
6530371
6088.3
... More
WBM (Grading-II)
-
-
-
... More
Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.
30.94
231467
7481.15
... More
WBM (Grading-III)
-
-
-
... More
Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
30.94
232448
7512.85
... More
Wet Mix Macadam
-
-
-
... More
Providing, laying, spreading and compacting stone aggregates to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer ( Pug Mill ), carriage of mixed materials by tipper to site, laying in uniform layers in sub-base / base course on a well prepared sub-base and compacting with smooth wheel roller of three wheel 80-100 kN static roller to proper grade and camber, achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and as per Technical Specification Clause 406.
2181.97
18239676
8359.27
... More
Prime coat
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
29505.49
1411543
47.84
... More
Tack coat
Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503
29505.49
472383
16.01
... More
Mix Seal Surfacing with processed Waste Plastic (dry process)
-
-
-
... More
Providing , laying and rolling of close-graded premix surfacing of 25 mm thickness composed of 11.2 mm to 0.9 mm ( Type-A ) or 13.2 mm to 0.9 mm (Type-B) aggregates using bitumen (Bitumen VG-30) with processed Waste Plastic after shredding (to the size passing 2.36 mm sieve and retained on 600 mm sieve) @8% by weight of bituminous binder in hot aggregates (DRY PROCESS) to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades as per Technical Specification Clause 509 and IRC:SP:98-2013
By Mechanical Means Type B
29505.49
11660570
395.2
... More
Chevron Signs at Bend
180
434734
2415.19
... More
Chevron Signs at Sharp Bend(double)
22
53134
2415.19
... More
Providing and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings and as per MoRT&H Technical Specification Clause 805
52
29536
568
... More
Traffic Signs
-
-
-
... More
Semi Reflective Traffic Signs: Providing and fixing of Semi Reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS Sheet duly stove white colour in front and grey colour in black with red reflective border of 65mm width and required letter and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm x12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450x450x600mm, 600mm below ground level as per approved drawing clause 1701.2.2.
-
-
-
... More
with 600 mm equilateral triangle MS sheeting
50
120760
2415.19
... More
with 600 mm circular MS sheeting
30
74904
2496.79
... More
with 600 mm x 600 mm square MS sheeting
3
7639
2546.29
... More
Semi Reflective Direction & Place Identification Sign: Providing and erecting direction and place identification of semi reflective sign board as per IRC: 67 made of 2mmThick M.S sheet duly stove enameled Paint white colour in front and grey colour in back with reflective border of 70mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specification of required shade and colour. Supported and welded on two nos. 47mm x 47mm of 12 SWG square tube of 3050mm height duly strengthened by 25mm x 5mm MS flat iron on edges on back firmly fixed to the ground by means of property design foundation with M – 15 grade cement concrete 450mm x 450mm x 600mm below ground level as per provided drawing and technical specification clause 1701.
1
3485
3484.62
... More
Pedestrian Crossing Markings: Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ color using hot thermoplastic material including reflectorising glass beads @ 250 gms per sqm area by fully / semi automatic thermoplast paint applicator machine fitted profile shoe, glass beads dispenser, propane tank heater and profile shoe heater including cost of cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per MoRT&H Technical Specification Clause 803
63
46053
731
... More
Painting lines, Dashes ,Arroes,etc. on Road in Two Coats on New Work: Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702
2208.18
349555
158.3
... More
PMGSY Informatory Sign Board with Logo
-
-
-
... More
Providing and fixing of typical PMGSY Informatory Sign Board with Logo as per MORD Specifications and Drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lowermost frame and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The topmost diamond plate will be welded to the middle plate 47mm x47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of frame post and steel tube will be painted with primer and two coats of epoxy paint as per Drawing Clause 1701 and Annexure 1700.1.
-
-
-
... More
Providing and Fixing 'Logo' of PMGSY Project
1
12874
12874.07
... More
(ii) Logo Board (As per fig. 5 of Road signage under PMGSY published by the NRRDA on Dec'06)
4
12643
3160.87
... More
Logo of Maintenance Board: Providing and fixing of typical PMGSY Informatory Sign Board with Logo as per MORD Specifications and Drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lowermost frame and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The topmost diamond plate will be welded to the middle plate 47mm x47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of frame post and steel tube will be painted with primer and two coats of epoxy paint as per Drawing Clause 1701 and Annexure 1700.1.
1
16697
16697.44
... More
Providing and Fixing 'Citizens' Information Board' of PMGSY / Bharat Nirman Project
-
-
-
... More
Providing and fixing typical “Citizen’s information Board” with Logo of PMGSY as per NRRDA Specifications and Drawing having two nos. MS plate of 1mm thick 900 x 750mm size each duly welded with 2 nos. vertical and 4 nos. Horizontal M.S. flat 50mm x 6mm size on back, the ends of the M.S. flats to be welded with 2x2450mm x 1150mm frame of M.S. square posts to be embedded in cement concrete M-15 grade of 600mm x 600mm size and 750mm below the ground level and keeping 50mm height above the ground level, two coats of epoxy painting MS square , flats and backside of the the M.S. sheets with a coat of primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of epoxy coated priming on rear side of the M.S. plates with bands and lettering of different approved shades as directed shown in the approved design with oil bound ready mixed synthetic paint and providing 70mm x 70mm size PMGSY Logo.
2
33395
16697.44
... More
Construction of 5th Kilometre Stone (Precast) : Reinforced cement concrete M15 grade kilometre stone / local stone of standard design as per IRC:8 fixing in position including painting and printing, etc. as per drawing and Technical Specification Clause 1703.
i) 5th Kilometre Stone(precast)
1
5337
5337.1
... More
Construction of Ordinary Kilometre Stone (Precast) : Reinforced cement concrete M 15 grade ordinary Kilometre stone with local stone of standard design as per IRC : 8 fixingin in position including painting and printing etc. as per drawing and technical specification clause 1703.
8
26540
3317.5
... More
Construction of 200 Metre Stone (Precast) : Reinforced cement concrete M 15 grade 200 metre stone with local stone of standard design as per IRC : 8 fixingin in position including painting and printing etc. as per drawing and technical specification clause 1703.
30
26130
871
... More
Boundary Pilar: Reinforced cement concrete M 15 grade Boundary pillars / local stone of standard design as per IRC : 25 fixed in position including finishing and lettering but excluding painting as per drawing and technical specification clause 1704.
30
24543
818.1
... More
Construction of road side pucca drain with M10 (1:3:6 with jhama brick aggregates) to specified lines, grades, levels and dimensions as per approved design and Technical specification Clause 307,16,06. excavated material to be used in embankment at site
-
-
-
... More
U shaped drain ( top clear width 600 mm, bottom clear width 600 mm and clear depth of 600 mm
488
2444036
5008.27
... More
Single bamboo
-
-
-
... More
Single bamboo palasiding / walling of whole 2nd class bamboo (Jati or Bethua) 65 to 75 mm dia and closely packed & driven @ 150 mm c/c including fitting fixing with half bamboo kamis horizontally in three rows with cane or tying with wire complete and struts 1.5 m apart longitudinally and providing bitumen drum sheet walling fixed with nails as per drawing and technical specification Clause 1302.5.
A) Driven at least 900 mm below ground and 1200 mm above ground on average
341
338954
994
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
209.74
101116
482.1
... More
Providing Concrete for Plain Concrete ( using jhama brick aggregate) in open foundations complete including form work as per drawing and Technical specification clause 802, 803, 900, 1202,& 1203
PCC grade M 15 ( using jhama brick aggregate)
Nominal Mix ( 1:2.5:5)
162.58
1394644
8578.2
... More
Plain cement concrete ( using jhama brick aggregate) in substructure complete including formwork as per drawings & technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204.
P.C.C grade M20 (1:2:4)(Nominal mix)
i) upto 5 m height
97.61
960727
9842.51
... More
Providing & laying reinforced cement concrete in superstructure as per drawings & technical specifications Clauses 800, 900, 1205.4 & 1205.5 RCC M 25
1) For height upto 5 m.
19.89
296977
14930.96
... More
Supplying, fitting, & placing HYSD bar reinforcement in superstructure complete as per drawing & technical specifications Clauses 1002, 1010 & 1202
1.56
145572
93315.3
... More
Providing weepholes in brick masonry/stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or PVC pipe ( 110 mm OD of 6.0 Kg/cm2 pressure ) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7
35
11501
328.6
... More
Maintenance
-
-
-
... More
Total for 1st year maintenance (including 18% GST)
7.49
296762
39600
... More
Total for 2nd year maintenance (including 18% GST)
7.49
351888
46956
... More
Total for 3rd year maintenance (including 18% GST)
7.49
1086188
144941
... More
Total for 4th year maintenance (including 18% GST)
7.49
1466501
195690
... More
Total for 5th year maintenance (including 18% GST)
7.49
1838600
245343
... More
3.Jatanbari-Chellagang Road to Banka Cherra Part Road via Dhepacharra Holy Cross School, Block- Karbook (length-9.3 km).
-
-
-
... More
Clearing and grubbing road land
-
-
-
... More
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and of serviceable material to be used or auctioned upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification Clause 201.
2.69
88415
32867.9
... More
Setting Out
-
-
-
... More
Setting Out (As per drawing enclosed) with Reference benchmark 1 no. , working benchmark 4nos. per km and near all drainage structure and bridges and Reference Pillars on both sides of the formation width Burjes @50m interval using PCC with jhama brick aggregate for all class of soil including marking of centre line, setting out curves and recording of levels etc. by Surveyor
-
-
-
... More
i) Plain Cement concrete and Cement concrete blocks
9.3
556045
59789.8
... More
Cutting of Trees, including Cutting of Trunks , Branches and Removal of Stumps
Cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per Technical Specification Clause 201.
-
-
-
... More
Girth above 300 mm to 600 mm
26
9950
382.7
... More
Girth above 600 mm to 900 mm
32
19379
605.6
... More
Excavation in Soil with Dozer with lead upto 100 m.
Excavation for roadway in soil by mechanical means with Dozer including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302.3
6188.72
414644
67
... More
Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m
-
-
-
... More
Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3
6188.72
224651
36.3
... More
Construction of Subgrade and Earthen Shoulders
-
-
-
... More
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site , spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1.
3130.48
624844
199.6
... More
Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means
-
-
-
... More
Scarifying Existing bituminous Road Surface by mechanical means to a Depth of 150 mm and disposal of scarified material with all lifts and leads upto 1000 m as per Technical Specification Clause 301.4.
10971.68
94356
8.6
... More
Making 50 mm x 50 mm Furrows
-
-
-
... More
Making 50 mm x 50 mm Furrows Making 50 mm x 50 mm furrows, 25mm/50 mm deep,450 to the center line of the road and at one meter interval in the existing thin bituminous wearing course including sweeping and disposal of excavated material within 1000 meters lead as per MoRT&H Technical specification clause 404.3.1
ii) 50 mm deep furrow cutting
10971.68
127271
11.6
... More
Construction of Embankment with Material Obtained from Roadway Cutting
-
-
-
... More
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 of Specifications for Rural Roads (1st Revision).
For spreading beyond 100 m
3713.23
248044
66.8
... More
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 of Specifications for Rural Roads (1st Revision).
For spreading within 100 m
8664.21
421947
48.7
... More
Granular Sub-base with Well Graded Material ( Table 400.1 ) using Jhama Brick Aggregate
-
-
-
... More
Construction of granular sub-base by providing well graded material ( Jhama Brick Aggregate , as per Table 400.1 ), spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
1820.95
11069391
6078.91
... More
Wet Mix Macadam Base Course
-
-
-
... More
roviding, laying, spreading and compacting stone aggregates to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer ( Pug Mill ), carriage of mixed materials by tipper to site, laying in uniform layers in sub-base / base course on a well prepared sub-base and compacting with smooth wheel roller of three wheel 80-100 kN static roller to proper grade and camber, achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and as per Technical Specification Clause 406.
1206.35
9237842
7657.68
... More
Prime Coat with Bitumen Emulsion
-
-
-
... More
(i)Low porosity
Providing and applying primer coat with bitumen emulsion (SS-1 grade) conforming to IS:8887 on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Technical Specification Clause 502 of Specification for Rural Roads (1st Revision), MORD.
31062.4
1475775
47.51
... More
Tack Coat with Bitumen Emulsion
-
-
-
... More
Providing and applying tack coat with Bitumen emulsion (RS-1 grade) conforming to IS:8887 using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Technical Specification Clause 503 of Specification for Rural Roads (1st Revision) & as directed by Engineer In Charge.
31062.4
497620
16.02
... More
25 mm thick Mix Seal Surfacing
-
-
-
... More
Providing , laying and rolling of close-graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.9 mm ( Type-A ) or 13.2 mm to 0.9 mm (Type-B) aggregates using viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller , finishing to required level and grades as per Technical Specification Clause 509. By Mechanical Means
Type-B Bitumen VG-30
31062.4
12018043
386.9
... More
Construction of Plastic Cell Filled Cement Concrete M-30 grade pavemnet
-
-
-
... More
Providing and laying plastic cell filled cement conrete M-30 Grade pavement, of required thickness over a prepared sub base, with any grade of ordinary portland cement ( 53 grade or 43 grade) capable of achiving the design strength with prior approval of the Engineer, course and fine aggregates conforming to IS:2386 as per clause 1501.2.4 laid in approved fixed side forwork ( steel channel , wedges, steel plates including leveling the formwork as per drawing), spreading the concrete with shovels, rakes , compacted using needle, screedand plate vibrater and finished in continuous operation, curing of concrete slabs for 14 days with curing compound ( where specified ) & water , finishing 2lines and grade as per drawing and Technical specification of cell filled concrete pavement published by NRRDA.
3750
5140313
1370.75
... More
Brick Masonry Retaining-Wall(Height-2meter)
-
-
-
... More
Excavation for Structures
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
upto 3m depth
124.8
60166
482.1
... More
Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & technical specifications Clauses 802, 803, 900, 1202 and 1203.
P.C.C grade M 15 ( using jhama brick aggregate )
182.4
1560600
8555.92
... More
Providing weepholes in brick masonry/stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or PVC pipe ( 110 mm OD of 6.0 Kg/cm2 pressure ) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7.
160
52576
328.6
... More
Filling in foundation trenches as per drawing & technical specification Clause 305.3.9
I) Sand filling
14.4
26736
1856.7
... More
Construction of road side pucca drain with M10 ( 1:3:6 with jhama brick aggregate) to specified lines, grades, levels and dimensions as per approved design and Technical Specification Clause 307, 1606. Excavated material to be used in embankment at site.
Trapezoidal drain ( top clear width 600 mm, bottom clear width 300 mm and clear depth of 600 mm
(a) In Ordinary Soil
300
952197
3173.99
... More
Box culvert
-
-
-
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.
i) in ordinary soil
152.06
73308
482.1
... More
Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & technical specifications Clauses 802, 803, 900, 1202 and 1203.
-
-
-
... More
Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & technical specifications Clauses 802, 803, 900, 1202 and 1203. P.C.C grade M 15 ( using jhama brick aggregate ) i)Nominal mix (1:2.5:5)
14.38
123034
8555.92
... More
Brick masorny work in cement mortar in foundation completed excluding pointing & plastering as per drawing & technical specifications Clauses 600, 1202 & 1203.
-
-
-
... More
Brick masorny work in cement mortar in foundation completed excluding pointing & plastering as per drawing & technical specifications Clauses 600, 1202 & 1203. ii) Brick masonry in 1:4 cement mortar
32.82
290443
8849.57
... More
Brick masonry work in cement mortar in substructure complete excepting pointing & plastering, as per drawing & technical specification Clauses 602, 603, 604, 1202 and 1204 ii) In 1:4 cement mortar
16.36
151033
9231.87
... More
Pointing with cement mortar (1:3) on brickwork as per drawing & technical specification Clauses 613.3 & 1204
2.47
235
95.1
... More
Providing and laying reinforced cement concrete in superstructure for height upto 5m with coarse aggregates of appropriate nominal sizes and grading including screening and cleaning, fine aggregate (sand) conforming to proper grading zone, both of approved quality, cement and water reducing admixtures, as necessary and mixing in concrete mixwe of suitable capacity and cost of curing with water, including labour, including preparation of dsign mix approved of the same by the Engineer in charge, cost for quality control, sampling, testing etc. including cost of form work and staging upto 5m but excluding reinforcement complete as per drawings as per drawing and technical specifications Clauses 800, 1401.4.1 and 1401.4.3 of Specification for Rural Roads, MORD.
-
-
-
... More
II) R.C.C grade M 25 (Design Mix) Plain/reinforced cement concrete in substructure complete including formwork as per drawings & technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. VI)R.C.C grade M-25 i)upto 5 m height
19.59
226643
11569.34
... More
Providing & laying reinforced cement concrete (using fine sand & stone aggregate) in superstructure as per drawings & technical specifications Clauses 800, 900, 1205.4 & 1205.5 RCC Grade M-25 Mix-
For height upto 5 m
9.21
115558
12547.04
... More
Providing PCC M 20 (with jhama brick aggregate) architectural coping on the top of wing wall, return wall etc. complete including formwork as per drawing & technical specification Clauses 615, 710 & 1204.3.11
17.08
10238
599.4
... More
Supplying, fitting, & placing HYSD bar reinforcement in superstructure complete as per drawing & technical specifications Clauses 1002, 1010 & 1202
0.92
85850
93315.3
... More
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards outward face complete as per drawing and technical specification Clauses 614, 709, 1206.3 of Specification for rural Roads including curing complete.
90
29574
328.6
... More
Backfilling behind abutment, wing wall & return wall complete as per drawings & technical specification Clause 1204.3.8 II) Sandy material
68.98
158861
2303
... More
Providing & laying filter media with jhama brick aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8
32.56
126232
3876.9
... More
Providing and fixing in position Drainage spouts complete as per drawing & technical specifications Clause 1209
4
6195
1548.8
... More
Providing bituminous wearing coat comprising of 20 mm thick premix carpet with seal coat Type D (with fine sand ) for culverts as per drawing & technical specifications Clauses 1206.2 and 500
31.2
10043
321.9
... More
I) Maintenanace of Culvert
-
-
-
... More
Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1909 of Specification for Rural Roads including cost of cement, sand, brick, boulders etc. as required and as per direction complete.
3
9103
3034.2
... More
ii)Maintenance of Culvert slab type
-
-
-
... More
Maintenance of slab type culvert by way of clearing, cleaning, erosion,repairs to cracks, parapet walls and protection works. Removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909 of Specification for Rural Roads including cost of all materials viz. cement, sand, bricks, boulders etc. as required and as per direction complete.
4
22048
5512
... More
PMGSY Informatory Sign Board with Logo
-
-
-
... More
Providing and fixing of typical PMGSY "Logo board/Logo Board at starting point" as per drawing and specifications of NRRDA having 1.6 mm thick 2 nos. 600 x 600 mm MS Sheet and 1.6 mm thick 2 nos. 1100 x 300 mm MS plate facing both sides of the alignment duly welded all Board with vertical square Post and 2 nos horizontal MS flats on back, embedding leg of MS square post of 75mm x 75mm of 12 SWG sheet in M-15 grade cement concrete 600 mm square size and 750 mm below the ground level and keeping 50mm height above the ground level, two coats of Epoxy painting on MS square flats and back side of the MS sheets over a coat of primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of Epoxy coated priming of rearside of the MS plates with Bands and letterings of different shades and sizes as directed and specified in the approved design with oil bound ready mixed synthetic paint complete in all respect.
The rate of each Board is inclusive of M.S square, M.S flats, M.S plates, all labour, fabricating and welding charges, cost of paintings and primer, cost of carriage & fixing and all other incidental charges in this regard complete in all respect maintaining line and level as directed by the Engineer-in-Charge including cost of protection, barricading and lighting etc.
-
-
-
... More
(i) Logo Board at starting point (As per fig. 107 of Road signage under PMGSY published by the NRRDA on Dec'06)
4
50060
12514.88
... More
Providing and fixing 'Logo' of PMGSY Project
-
-
-
... More
Logo of PMGSY Project: Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
Using 0.252 cum M-15 Cement Concrete
3
37545
12514.88
... More
Providing and fixing "Citizen's Information Board" for PMGSY Project
-
-
-
... More
Providing and fixing typical "Citizen's Information Board" with Logo of PMGSY as per NRRDA Specifications and drawing having two nos MS sheet of 1.6 mm thick 900mm x 750mm size each duly welded with 2 Nos. vertical and 4 Nos. horizontal M.S. flat 50 mm x 6mm size on back. The ends of the M.S. flats to be welded with 2 x 2450 mm x 1150mm frame of M.S square 75mm x 75mm of 12 SWG sheet, two legs of M.S. square posts to be embedded in cement concrete M-15 grade of 600 mm x 600 mm size and 750 mm below the ground level and keeping 50 mm height above the ground level, two coats of Epoxy painting on MS square, flats and backside of the M.S. sheets with a coat of local primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of Epoxy coated priming on rearside of the M.S plates with Bands and lettering of different approved shades as directed as shown in the approved design with oil bound ready mixed synthetic paint and providing 70 mm x 70 mm size PMGSY Logo. The rate of each Board is inclusive of M.S square, M.S flats, M.S plates, cost of M-15 Cement Concrete, all labour and welding charges, cost of all paintings and primer, Cost of Carriage & fixing and all other incidental charges in this regard to complete in all respect maintaining line and level as directed by the Engineer-in-Charge including cost of protection, barricading, lighting etc.
Construction wing will add cost of 0.54 cum M -15 cement concrete for arriving at complete rate of each Board.
3
49923
16640.85
... More
Kilometre Stone
-
-
-
... More
Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 of Specification for Rural Roads (1st Revision).
-
-
-
... More
i) 5th Kilometre Stone (Precast) : Construction wing will add cost of 0.392 cum M-15 Cement Concrete and 3.68 Kg of Steel reinforcement for each post
1
5337
5337.1
... More
ii) Ordinary Kilometre Stone (Precast) : Construction wing will add cost of 0.269 cum M-15 Cement Concrete and 1.88 Kg of Steel reinforcement
9
29858
3317.5
... More
iii) 200 Metre Stone (Precast) :
Construction wing will add cost of 0.048 cum M-15 Cement Concrete and 2.00 Kg of Steel reinforcement
37
32227
871
... More
Providing and fixing typical "Maintenance Information Board" for PMGSY Providing and fixing typical "Maintenance Information Board" with Logo of PMGSY as per NRRDA Specifications and drawing having one nos MS sheet of 1.6 mm thick 900mm x 1500mm size duly welded with 4 Nos. vertical and 8 Nos. horizontal M.S. flat 50 mm x 6mm size on back. The ends of the M.S.flats to be welded with 2 x 2450 mm x 1150mm frame of M.S square 75mm x 75mm of 12 SWG sheet, two legs of M.S.square posts to be embedded in cement concrete M-15 grade of 600 mm x 600 mm size and 750 mm below the ground level and keeping 50 mm height above the ground level, two coats of Epoxy painting on MS square, flats and backside of the M.S. sheets with a coat of primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of Epoxy coated priming on rearside of the M.S plates with Bands and lettering of different approved shades as directed as shown in the approved design with oil bound ready mixed synthetic paint and providing 70 mm x 70 mm size PMGSY Logo 2 nos.
The rate of each Board is inclusive of M.S square, M.S flats, M.S plates, cost of M-15 Cement Concrete, all labour and welding charges, cost of all paintings and primer, Cost of Carriage & fixing and all other incidental charges in this regard to complete in all respect maintaining line and level as directed by the Engineer-in-Charge including cost of protection, barricading, lighting etc.
1
12515
12514.88
... More
Guide Post
-
-
-
... More
Construction of RCC guide post of 250 mm dia and total 600 mm long ( 300 mm below GL) M-15 grade cast-in-situ with 20 mm nominal size aggregate , true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500 as per drawing and technical specification clause 1401.6 In Ordinary Soil
45
23967
532.6
... More
Traffic Signs
-
-
-
... More
Retero Reflective Traffic Signs:Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove, white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm x 12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 x 450 x 600mm, 600mm below ground level as per approved drawing Clause 1701.2.2.
-
-
-
... More
a) 600 mm Equilateral Triangle
70
187368
2676.68
... More
b) 600 mm Circular
100
279008
2790.08
... More
c) 600 mm x 600 mm Square
30
85763
2858.78
... More
Direction and Place Identification Signs with size more than 0.9 sqm size board
-
-
-
... More
Retero-Reflective Traffic signs : Providing and erecting direction and place identification of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and require message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47mm x 47mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 and annexure 1700.1 of Specification for Rural Roads.
15
67365
4490.98
... More
Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work
-
-
-
... More
(ii) Up to 10 cm in width - Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Reference to MORT&H's specification 803).
1655.4
262050
158.3
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic
compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per Clause 803 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
827.7
605049
731
... More
Maintenance
-
-
-
... More
Total for 1st year maintenance (including 18% GST)
9.3
368280
39600
... More
Total for 2nd year maintenance (including 18% GST)
9.3
436691
46956
... More
Total for 3rd year maintenance (including 18% GST)
9.3
1347951
144941
... More
Total for 4th year maintenance (including 18% GST)
9.3
1819917
195690
... More
Total for 5th year maintenance (including 18% GST)
9.3
2281690
245343
... More
● The upgradtion cost is inclusive of GST @ 18% and ● Maintenance amount is pre-specified by the authority as mentioned above.
-
172682492
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements