Food Corporation Of India Tender

3 x 2.5 sq.mm

3 x 4 sq.mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

20 mm dia

Earthing with G.I. earth pipe 4.5 mtr long 40 mm dia including accessories ,and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal /coke and salt etc as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ sub main wiring/ cable as required.

Laying and fixing of one No. PVC insulated & PVC sheathed/XLPE al conductor cable of 1.1KV grade of following size on the wall surface as reqd.(clamped with 1mm thick saddle)

Upto 35 sq.mm

Supplying and fixing of 32 mm dia X 2.33 meters long G.I. pipe(medium class) bracket for mounting of fluorescent /HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamp with nuts, bolts and washer, paintaing the flat iron with primer and finish paint stc. as required.

Supplying and fixing of following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single Pole & neutral

Triple Pole and Neutral

Supplying and fixing 5/6 amps switch piano type/tumbler switch/ socket on the existing switch box/ cover including connections etc. as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc. as required. Group C.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB /Isolator)

6 way, SPN double door

8 way, SPN double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

4 way (4 + 12), Double door

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent/LED fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1 Way 5/6 Switch

3 pin 5/6 socket outlet

15/16 A Switch

6 pin 15/16 A Socket outlet

Supplying anf fixing following size/modules, G.I box along with modular base & cover plate for modular switches in recess etc. as required

3 Module (100 mm X 75 mm)

12 Module (200 mm X 150 mm)

Supply, installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electroic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying , installation , testing and commissioning of cubical type panel made out from 2 mm ( 14 SGW) thick CRCA sheet steel size 1000 x 950 x 300 mm, hinged type openable door , and angle iron of 50x 50x 6 mm. and flat iron of 40 x 6 mm.with horizontal and vertical intermediate member’s for mounting of panel, fabricated & factory finished , followed by powder coated painting and provided with gasket to make dust / vermin proof Degree of IP protection shall be IP - 42 or more Inter connections with copper conductor cable with suitable size of thimbles, lugs etc. locking arrangement , detachable gland plate, connection , interconnections with suitable size (200 Amp capacity) 4 strip aluminium busbar and PVC insulated copper conductor cable including and providing and fixing digital type Ampere meter, Voltmeter, Indication LED lamp, Selector switch complete etc. as required.(Having minimum depth 300mm )along withangle iron stand to hold the pane llegs should be grounted in cement concrete 1 : 3: 6: The panel should incorporating the following items: - 1. MCCB. 4 pole 100 amp. 16 KA of make (MDS/HAVELLS/PROTEC/GE/STD/C&S) = One 2. MCCB. 3 pole 63 amp. 16 KA of make (MDS/HAVELLS/PROTEC/GE/STD/C&S) = Two 3. MCB Triple Pole Neutral 40 Amps =03 Nos 3. 200 amp. rating & 4 strip Al. busbar = one set 4.Digital type Ampere meter, Voltmeter, Indication LED lamp, Selector switchdgital , CT’S (with HRC fuse) (L & T/C&S make) = 1 Set

Supplying of following size XLPE insulated & PVC tape innersheathed aluminium conductor armoured cable of 1.1 KV grade of following size confirming to IS:7098 (Part- I) 1988 with up to date ammendment as required.

2 x 10 Sq.mm

4 x 25 Sq.mm

Supply of LED street light fitting of 60 watts, 240 volts of streetlight pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP65 protection.

P/F of cable termination of PVC box of size 20cm X 15cm X 10 cm with compression termination arrangements, 6-10 Amp SP MCB and double natural link etc as required.

Supply of LED luminiaire fitting with ECO-1 highly robust industrial box type suitable for single T8 twin LED Tube, LED Tube LGT8-2 x 20 Watts (Total 40watt) with LED Glass T-8 Tube with in built driver double sided connection including connection, interconnection etc completed as required.

Installation,testing & commissioning of integral well glass luminaire compressed of dia cast canopy gear box housing and glass driver surge with heat resistance glass of LED well glass fitting of 40 watt. 110 Lm/watt to 125Lm/Watt or Luminous should not be less than 4200 as per direction of Engineer in-charge as per direction of engineer-In-Charge.

Supply,installation,testing & commissioning of integral well glass luminaire compressed of dia cast canopy gear box housing and glass driver surge with heat resistance glass of LED well glass fitting of 70 watt. 110 Lm/watt to 125Lm/Watt or Luminous should not be less than 7700 as per direction of Engineer in-charge as per direction of engineer-In-Charge.

Supply,installation testing & commissioning of 36 Watt cool day light 2ft X 2ft LED surface full lit luminaire with 100 Lumen/Watt

Supply,installation testing & commissioning of 18 Watt cool day light 1ft X 1ft LED surface full lit luminaire with 100 Lumen/Watt

Supplying, Installation, Testing and commissioining of 300mm dia sweep exhaust fan of approved Heavy duty or any other equivalent make with 1400 RPM speed along with all other accessories and fixing the fan on the existing wall including connection etc as required.

Credit items for old dismantled non functional unserviceable 10/20 Amps SP MCB

Credit items for old dismantled non functional 6- 32 Amps unserviceable SPN MCB

Credit items for old dismantled non functional unserviceable 16/20W LED Tube Light Fittings

Credit item for old Electric Panel.