Department Of Agriculture Tender

Supplying and laying of following sizes XLPE insulated PVC sheathed copper conductor Un-armoured cable including necessary connection etc as required. 3 core 4 Sq mm

Drawing of armoured cable with proper saddling etc as required:-

Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required 4 way SPN MCB DB (Double door):-

Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:-6 to 32 amps SP MCB:-

Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:- 63 amps DP isolator:-

Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:-Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:-

Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):- 120 watt LED flood light fixture with integral driver and secondary lens (IP 66):-

Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12"x 12" having locking arrangement including CC work, holes on earth pipe etc. as required.

Extra for using salt (5 kg) and charcoal (46 kg) for pipe earth electrode as required.

Proving and fixing / Drawing 4.06 mm dia (8 SWG) Copper wire on surface or in existing G.I / PVC / Polythene pipe for earthing as required.

Supply & Erection of 12.5 MTRS LIGHTING MAST FABRICATED PART AS PER DIMENSION: TOP DIA-150 mm, BOTTOM DIA-360 mm, SECTION-2 nos (SECTION LENGTH-6500 mm) THICKNESS- 3,3 mm. BASE PLATE-520 mm x 25 mm,PCD-445 mm, with following items:High Mast sections with base plate, Lantern carriage suitable to fix 6 nos. of Luminaries (LED Flood Light) symmetricallly, 3 suspension Head frame (Without LED Floodlight & aviation lights and feeder pillar panel) Wind speed: 50 mtr/sec Supply & Erection of Foundation Bolts M24x 850 mm x 6 nos with Template and Anchor Plate Supply & Erection of 12.5 MTR Lighting Mast Accessories PART: Double Drum Winch(Gear Ratio - 50:1), Power Tool, Trailing Cable, SS wire rope (Grade-AISI 316) Make - Ashai / BW Itd., Compensating Disc, L-Stopper (3 Nos.), Manual operating handle, Mounting plates, Lightening Arrestor and earthling spikes (MS GI)

Supply & Erection of standard feeder pillar panel with single dial timer on small civil foundation with all materials

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.- All kinds of soil

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading torequired slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burntbrick aggregate 40 mm nominal size).

Centering shuttering including struttings, propping etc. and removal of form work for: Columns, Pillars, Piers, Abutments, Posts and Struts withwooden plank . Foundations, footings, bases for columns etc. for mass concrete with timber plank

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D orMore

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level: 1:1.5:3( 1 Cement: 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size)

Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design.