Department Of Agriculture Tender

First class brick work in superstructure above plinth level& upto floor-five level including cost of all materials as required complete In cement mortar1:4(1cement:4finesand) Toilet brick piller-

Extra for brick masonary work in tringular, square and rectangular pillars I ncluding cost of all materils as required complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size)

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position

12 mm cement plaster of mix cement mortar 1:4 (1 cement : 4 fine sand)

Neat cement punning

Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of Engineer-in-charge.

Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc. complete 250 x 16 mm

Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with wooden switch board with bakelite cover and piano type switch including connection etc as required:- a) Short point -

b) Medium Point

Providing and fixing of 3 pin 5/6 amps plug point with piano type 5/6 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on switch board, earthing the 3rd pin etc. as required:-

Providing and fixing of 3/6 pin15/16 amps plug point with piano type 15/16 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable (FR) on switch board, earthing the 3rd pin etc. as required:-

Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. a) 2x1.5 sqm = 60 sqm

b) 2x2.5 sqm = 90 sqm

Supplying & Fixing of14/15 watt T-5 lamps & accessories including connection etc. as required.

Supplying and fixing of 18 watt LED retrofit lamp with polycarbonate body and 12 aluminium heatsink including necessary connection etc. as required:-

12 Watt LED retrofit lamp with polycarbonate body with aluminium heat sink B.C type

Supplying and fixing of 1200 mm sweep white colour AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod, conopies, shackles, 3 nos. blades, including wiring the down rod with 2x1.5 sqmm PVC insulated copper conductor cable (FR) (ISI marked, BEE 1 star/ minimum service value 4.00 m3/min/W)

Making different sizes of hole in the wall for including finishing the same with cement plastering and painting etc as required

First class brick work in foundation and plinth including cost of all materials as required complete. 1:4 (1cement : 4 fine sand)

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complee upto plinth level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15o landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centraing shuttering, finishing and reinforcement 1:2:4 (1 cement : 4 fine sand : 4 stone aggregate 20mm nominal size)

Half brick masonary work with 1st class brick in super structure upto floor five level including cost of all materials required complete 1:4 (1 cement : 4 fine sand)

Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundaiton trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil

Providing and fixing water closet squatting pan (indian type W.C. Pan) with 100mm sand cast iron P or S trap, 10 liter low level white PVC flushing cistern with manually controller device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors whereever required: White Vitreous china Orrisa pattern W.C. Pan of size 580x440 mm with integral type foot rests.

Providing and fixing while viteous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall usuing MS screws of 65/100 mm size complete as per manufacturers' specification and direction of Engineer-In-Charge

Providing and fixing to existing door frames. 30mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick 30mm thickness, 110mm heat moulded PVC ‘C channel of size 20mm shall be width out of which 90mm shall be flat and tapered in 45 degree angle on either side forming stiles; and 5mm thick, 110mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 130mm wide PVC sheet out of which 90mm shall be flat and 20mm shall be tapered on both sides shall be provided to form lock rail. Top bottom and lock rails either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-incharge, manufacture’s specification & drawing.

Providing and fixing of external electric service connection alongwith all accessories etc. complete

Providing and fixing of drinking water service connection alongwith all accessories etc. complete

Centering and shuttering including struting, popping and removal of form work etc.