Border Security Force Tender

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3.5 X 120 sq. mm (45mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 2 X 25 sq. mm (22mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for 2x25 SQMM size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying & laying of one number PVC insulated and PVC sheathed Armoured / XLPE power cable of 1.1 KV grade of size 2 x 25 sqmm, direct in ground in exisisting HDPE/RCC/HUME/METAL PIPE etc as required, but excluding sand cushioning and protective covering Conf. to IS:7098 part - I of make KEI/ Polycab/Havells)

Supplying & laying of one number PVC insulated and PVC sheathed Armoured / XLPE power cable of 1.1 KV grade of size 3.5 x 120 sqmm, direct in ground in exisisting HDPE/RCC/HUME/METAL PIPE etc as required, but excluding sand cushioning and protective covering Conf. to IS:7098 part - I of make KEI/ Polycab/Havells)

S/ITC of outdoor type feeder piller, double door made out of 16 SWG CRCA sheet of size 1000 mm x 900 mm x 350 mm deep having 200 amps, 04 nos insulated aluminium bus bars and to accommodate following accessories, front & back door openable and P & F of internal connection with suitable size of cu wires, arrangement for incoming / outgoing cabling / cable termination, earthing, locking, interconnection etc. as required. (i) 125 Amps, 4 pole, 415 volts, 18KA, 50 Hz MCCB make L&T - 2 Nos (ii) 125 Amps, 4 pole, 415 volts, 50 Hz changeover make -01 Nos (iii) 63 Amp, 4 pole, MCB, 10 KA, C curve, 415 V, 50 Hz make L&T - 02 Nos (iv) 63 Amp, Double pole, MCB, 10 KA, C curve, 415 V, 50 Hz make L&T - 06 Nos (v) Cu wire lead a) 25 sq mm. b) 16 sq mm. (vi) VAF + PF meter, C1 make L&T cat No. WL411010OOOO make L&T - 01 Nos (vii) Thimble suitable size (viii) Indicator LED Lamp (R,Y,B) -03 Nos (ix) Danger Sign Plate of 440 Volts, made of aluminium/stainless steel, full color printing.-01

Supplying & Fixing of 125 Amp manual Changeover Switch Disconnector, Sheet Steel, four pole with Connections etc as required. (Make L&T/Havells/C&S/CG)

Supplying & Fixing of 63 Amp MCB Double pole with Connections etc as required. (Make L&T/Havells/C&S/CG)

Add GST @18% on DSR'22 instead of 12% ( Multiplication Factor 0.0633 on total of item Srl No. 01 to 8)

Add @ 1% labour cess