Assam Rifles Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Assam Rifles Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date3 Oct 2023
Closing Date25 Oct 2023
Tender Amount₹ 2,07,45,151
Costs
EMD
₹ 4,15,000Document Cost
₹ 1,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_ARMHA_774357_1Bid Award Id
ViewTender No
VIII.11014/8143/Addn-Altrn/HQ 21 Sect AR/Engr-2023Tender Authority
Assam Rifles ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Provn of additional/alteration of existing SM Bks, S/JCOs and S/Offrs accn alongwith life enhancement works at KLP Radhanagar of 29 Assam Rifles
Provn of additional/alteration of existing SM Bks, S/JCOs and S/Offrs accn alongwith life enhancement works at KLP Radhanagar of 29 Assam Rifles
BOQ Items
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.
513.78
-
-
Demolishing cement concrete manually/ by mechanical means
including disposal of material within 50 metres lead as per direction
of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
44.68
-
-
Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C., kitchen and the
like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed
with water proofing compound conforming to IS 2645 in
recommended proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse
sand) mixed with water proofing compound in recommended
proportion including rounding off junction of vertical and
horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot
at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints
of PVC sheet should be 100 mm wide and pasted to each
other with bitumen @ 1.7 kg/sqm).
225.9
-
-
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural
sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources).
36.3
-
-
Providing and laying 75 mm thick compacted bed of dry brick
aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineerin- charge.
111.66
-
-
52 mm thick cement concrete flooring with concrete hardener topping,
under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
111.66
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
111.66
-
-
Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead.
850.4
-
-
M & L for 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand).
850.4
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.
189.82
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer.
850.4
-
-
Distempering with 1st quality acrylic distemper (ready mixed) having
VOC content less than 50 gms/litre, of approved manufacturer, of
required shade and colour complete, as per manufacturer's specification.Two or more coats on new work.
638.18
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
247.48
-
-
Taking out doors, windows and clerestory window shutters (steel or
wood) including stacking within 50 metres lead :Of area 3 sq. metres and below.
48
-
-
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement
concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size)
240
-
-
Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
13.2
-
-
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine
cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
119.6
-
-
Providing and fixing factory made 30 mm thick door shutter made of
solid PVC foam profile. The styles & rails shall be of size 75 mm x 30
mm having wall thickness 5 mm. The styles, top & bottom rails shall
have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and railsshall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge.
39.48
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm.
12
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm.
8
-
-
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :Two or more coats on new work. and applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
22.18
-
-
Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/
steel works
12.96
-
-
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :Two or more coats on new work.
12.96
-
-
Renewing glass panes, with putty and nails wherever necessary
including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm.
14.4
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10mm.
32
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :75mm.
32
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal
ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
124.6
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming
to IS : 13592 Type A, including jointing with seal ring conforming to
IS : 5382, leaving 10 mm gap for thermal expansion.110 mm bend.
40
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming
to IS : 13592 Type A, including jointing with seal ring conforming to
IS : 5382, leaving 10 mm gap for thermal expansion.110x110x110 mm
28
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design
to unplasticised - PVC rain water pipes by means of 50x50x50 mm
hard wood plugs, screwed with M.S. screws of required length,
including cutting brick work and fixing in cement mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete.
110 mm
72
-
-
Providing & Fixing Slotted cowl (terminal guard) 100 mm dia
4
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work
in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,
with C.I. surface box 100mm top diameter, 160 mm bottom diameter
and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size ) , i/c necessary excavation, foundation concrete 1:5:10
(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size) and inside plastering with cement mortar 1:3 (1 cement : 3
coarse sand) 12 mm thick, finished with a floating coat of neat cement
complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
4
-
-
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).
5.2
-
-
M & L for 15 mm cement plaster finished with a floating coat of
neat cement :1:4 (1 cement : 4 fine sand).
96.98
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
complete.
24
-
-
Providing and fixing P.V.C. low level flushing cistern with manually
controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White.
24
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.Flexible pipe 32 mm dia.
24
-
-
Providing and fixing brass bib cock of approved quality :15 mm nominal bore.
48
-
-
Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430x260x350 mm and 340x410x265 mm
sizes respectively with automatic flushing cistern with standard flush
pipe and C.P. brass spreaders with brass unions and G.I clamps
complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
6
-
-
Providing and fixing water closet squatting pan (Indian type W.C.
pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever) conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good the walls and
floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
24
-
-
Repairs to plaster of thickness 12 mm to 20 mm in patches of area
2.5 sq.meters and under, including cutting the patch in proper shape,
raking out joints and preparing and plastering the surface of the walls
complete, including disposal of rubbish to the dumping ground, all
complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand).
57.6
-
-
Distempering with 1st quality acrylic distember (Ready mix) having
VOC content less than 50 grams/ litre of approved brand and
manufacture to give an even shade :Old work (one or more coats)
3913.52
-
-
Removing dry or oil bound distemper, water proofing cement paint
and the like by scrapping, sand papering and preparing the surface
smooth including necessary repairs to scratches etc. complete.
3673.14
-
-
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade : One or more coats on old work.
442.9
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.
1716.38
-
-
Schedule 'A' Part-I (Internal Electrification bldg No P/2010/91 A and B)
-
-
-
Supplying and fixing 5/6 amps switch piano type switch/ socket on the
existing switch box/ cover including connections etc. as required.
200
-
-
Supplying and fixing 3 pin 5/6 amps socket outlet piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
40
-
-
Supplying and fixing brass batten/ angle holder including
connections etc. as required.
90
-
-
Supplying,installation of exhaust fan PVC body 300mm sweep in the existing opening,including making good the damage, connection, testing,commissioning etc.as required(Make: Philips/Bajaj/Crompton).
12
-
-
Supplying and fixing following way, single pole and neutral, sheet
steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).way, 8 way Double door.
12
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick
including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
2
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm).
16
-
-
Schedule 'A' Part-I (Addn/altrn of 06 Nos SM BK in 02 Blocks -Bldg No P/2010/08F and P/2011/20 (A to C))
-
-
-
Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead.
1117.8
-
-
Grading roof for water proofing treatment with Cement mortar 1:4 (1cement : 4 coarse sand).
12.84
-
-
Providing and laying APP (Atactic Polypropylene Polymer) modified
prefabricated five layer 3 mm thick water proofing membrane, black
finished reinforced with non-woven polyester matt consisting of a
coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by
the same membrane manufacture of density at 25°C, 0.87-0.89 kg/
litre and viscocity 70-160 cps. Over the primer coat the layer of
membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick.
641.12
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.
88.14
-
-
Demolishing cement concrete manually/ by mechanical means
including disposal of material within 50 metres lead as per direction
of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
35.26
-
-
Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C., kitchen and the
like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed
with water proofing compound conforming to IS 2645 in
recommended proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse
sand) mixed with water proofing compound in recommended
proportion including rounding off junction of vertical and
horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot
at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints
of PVC sheet should be 100 mm wide and pasted to each
other with bitumen @ 1.7 kg/sqm).
189.42
-
-
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural
sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources).
28.66
-
-
Providing and laying 75 mm thick compacted bed of dry brick
aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineerin- charge.
88.14
-
-
52 mm thick cement concrete flooring with concrete hardener topping,
under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
88.14
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
91.74
-
-
M & L for 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand).
476.68
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer.
476.68
-
-
Distempering with 1st quality acrylic distemper (ready mixed) having
VOC content less than 50 gms/litre, of approved manufacturer, of
required shade and colour complete, as per manufacturer's specification.Two or more coats on new work.
428.68
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
48
-
-
Taking out doors, windows and clerestory window shutters (steel or
wood) including stacking within 50 metres lead :Of area 3 sq. metres and below.
30
-
-
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement
concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size)
282
-
-
Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
9.6
-
-
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine
cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
59.4
-
-
Providing and fixing factory made 30 mm thick door shutter made of
solid PVC foam profile. The styles & rails shall be of size 75 mm x 30
mm having wall thickness 5 mm. The styles, top & bottom rails shall
have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and railsshall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge.
18.9
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm.
12
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm.
12
-
-
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :Two or more coats on new work. and applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
21.12
-
-
Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/
steel works
23.4
-
-
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :Two or more coats on new work.
23.4
-
-
Renewing glass panes, with putty and nails wherever necessary
including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm.
12.8
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10mm.
24
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :75mm.
24
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal
ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter.
174.7
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming
to IS : 13592 Type A, including jointing with seal ring conforming to
IS : 5382, leaving 10 mm gap for thermal expansion.110 mm bend.
48
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming
to IS : 13592 Type A, including jointing with seal ring conforming to
IS : 5382, leaving 10 mm gap for thermal expansion.110x110x110 mm
22
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design
to unplasticised - PVC rain water pipes by means of 50x50x50 mm
hard wood plugs, screwed with M.S. screws of required length,
including cutting brick work and fixing in cement mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete. 110 mm.
114
-
-
Providing & Fixing Slotted cowl (terminal guard) 100 mm dia
6
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work
in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,
with C.I. surface box 100mm top diameter, 160 mm bottom diameter
and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size ) , i/c necessary excavation, foundation concrete 1:5:10
(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size) and inside plastering with cement mortar 1:3 (1 cement : 3
coarse sand) 12 mm thick, finished with a floating coat of neat cement
complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
8
-
-
Providing and fixing P.V.C. low level flushing cistern with manually
controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White.
18
-
-
Providing and fixing brass bib cock of approved quality :15 mm nominal bore.
42
-
-
Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430x260x350 mm and 340x410x265 mm
sizes respectively with automatic flushing cistern with standard flush
pipe and C.P. brass spreaders with brass unions and G.I clamps
complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
12
-
-
Distempering with 1st quality acrylic distember (Ready mix) having
VOC content less than 50 grams/ litre of approved brand and
manufacture to give an even shade :Old work (one or more coats)
4746.08
-
-
Removing dry or oil bound distemper, water proofing cement paint
and the like by scrapping, sand papering and preparing the surface
smooth including necessary repairs to scratches etc. complete.
2373.04
-
-
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade : One or more coats on old work.
423.6
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.
1985.3
-
-
Removing dry or oil bound distemper, water proofing cement paint
and the like by scrapping, sand papering and preparing the surface
smooth including necessary repairs to scratches etc. complete.
992.66
-
-
Schedule 'A' Part-II (Addn/altrn of existing 08xS/JCOs accn in 02 Blocks(Bldg No P/2010/R-2/09A and B)
-
-
-
Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead.
506.56
-
-
Grading roof for water proofing treatment with Cement mortar 1:4 (1cement : 4 coarse sand).
4.85
-
-
Providing and laying APP (Atactic Polypropylene Polymer) modified
prefabricated five layer 3 mm thick water proofing membrane, black
finished reinforced with non-woven polyester matt consisting of a
coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by
the same membrane manufacture of density at 25°C, 0.87-0.89 kg/
litre and viscocity 70-160 cps. Over the primer coat the layer of
membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick.
242.72
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.
18
-
-
Demolishing cement concrete manually/ by mechanical means
including disposal of material within 50 metres lead as per direction
of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
7.2
-
-
Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C., kitchen and the
like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed
with water proofing compound conforming to IS 2645 in
recommended proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse
sand) mixed with water proofing compound in recommended
proportion including rounding off junction of vertical and
horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot
at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints
of PVC sheet should be 100 mm wide and pasted to each
other with bitumen @ 1.7 kg/sqm).
32.4
-
-
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural
sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources).
5.85
-
-
Providing and laying 75 mm thick compacted bed of dry brick
aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineerin- charge.
18
-
-
52 mm thick cement concrete flooring with concrete hardener topping,
under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
18
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
18
-
-
M & L for 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand).
215.84
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer.
215.84
-
-
Distempering with 1st quality acrylic distemper (ready mixed) having
VOC content less than 50 gms/litre, of approved manufacturer, of
required shade and colour complete, as per manufacturer's specification.Two or more coats on new work.
179.84
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
36
-
-
Providing & fixing fly proof wire gauze to windows, clerestory windows &doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides
58.18
-
-
Providing and fixing factory made door frame (single rebate) made out ofsingle piece extruded solid PVC foam profile with homogenous fine
cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven selftapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
39.6
-
-
Providing and fixing factory made 30 mm thick door shutter made of
solid PVC foam profile. The styles & rails shall be of size 75 mm x 30
mm having wall thickness 5 mm. The styles, top & bottom rails shall
have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and railsshall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge.
12.6
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm.
16
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm.
16
-
-
Renewing glass panes, with putty and nails wherever necessary
including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm.
12.8
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal
ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter.
48
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming
to IS : 13592 Type A, including jointing with seal ring conforming to
IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°, 110 mm bend
12
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming
to IS : 13592 Type A, including jointing with seal ring conforming to
IS : 5382, leaving 10 mm gap for thermal expansion.Single tee with door.110x110x110 mm
6
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design
to unplasticised - PVC rain water pipes by means of 50x50x50 mm
hard wood plugs, screwed with M.S. screws of required length,
including cutting brick work and fixing in cement mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete. 75 mm.
16
-
-
Providing & Fixing Slotted cowl (terminal guard) 100 mm dia for vent pippes.
4
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work
in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,
with C.I. surface box 100mm top diameter, 160 mm bottom diameter
and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size ) , i/c necessary excavation, foundation concrete 1:5:10
(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size) and inside plastering with cement mortar 1:3 (1 cement : 3
coarse sand) 12 mm thick, finished with a floating coat of neat cement
complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
4
-
-
Providing and fixing P.V.C. low level flushing cistern with manually
controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White.
8
-
-
Providing and fixing brass bib cock of approved quality :15 mm nominal bore.
8
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931,15mm nominal bore.
40
-
-
Providing and fixing C.P. brass wall mixer with provision of overhead shower with 115mm long pipe with chrome finish(make: Hindware/Jaquar)
8
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter
8
-
-
Providing and fixing C.P brass hot and cold basin mixer tap with chorme finish(make: Hindware/Jaquar).
8
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
8
-
-
Providing and fixing PTMT soap Dish Holder having length of 138mm,
breadth 102mm, height of 75mm with concealed fitting arrangements,
weighing not less than 106 gms.
8
-
-
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto
1 metre long with S.S. triangular plate to Eureopean type W.C. of
quality and make as approved by Engineer - in - charge.
8
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
complete.
8
-
-
Providing and fixing solid plastic seat with lid for pedestal type W.C.
pan complete :White solid plastic seat with lid
8
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.Flexible pipe 32 mm dia.
8
-
-
Providing and fixing 600x120x5 mm glass shelf with edges round off,
supported on anodised aluminium angle frame with C.P. brass
brackets and guard rail complete fixed with 40 mm long screws, rawl
plugs etc., complete.
8
-
-
Distempering with 1st quality acrylic distember (Ready mix) having
VOC content less than 50 grams/ litre of approved brand and
manufacture to give an even shade : Old work (one or more coats)
1126.3
-
-
Removing dry or oil bound distemper, water proofing cement paint
and the like by scrapping, sand papering and preparing the surface
smooth including necessary repairs to scratches etc. complete.
1120.85
-
-
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade : One or more coats on old work.
90.63
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shadeOld work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.
557.7
-
-
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Kiln seasoned and chemically treated hollock wood.
0.26
-
-
Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately).18 mm thick.
41.28
-
-
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with
necessary screws etc. complete.50x37x1.50 mm.
80
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm.
16
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm.
16
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :75mm.
32
-
-
Providing and laying 75 mm thick compacted bed of dry brick
aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineerin-
charge
60
-
-
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural
sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources).
4.5
-
-
Chequerred precast cement concrete tiles 22 mm thick in footpath &
courtyard, jointed with neat cement slurry mixed with pigment to match
the shade of tiles, including rubbing and cleaning etc. complete, on 20
mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Dark shade pigment using ordinary cement.
108
-
-
Schedule 'A' Part-II (Internal Electrification of existing 08xS/JCOs accn in 02 Blocks(Bldg No P/2010/R-2/09A and B))
-
-
-
Supplying and fixing 5/6 amps switch piano type switch/ socket on the
existing switch box/ cover including connections etc. as required.
40
-
-
Supplying and fixing 3 pin 5/6 amps socket outlet piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
16
-
-
Supplying and fixing following piano type switch/ socket on the
existing switch box/ cover including connections etc. as required.6 pin 15/16 A socket outlet
4
-
-
Supplying and fixing following piano type switch/ socket on the
existing switch box/ cover including connections etc. as required.15/16 A switch
4
-
-
Supplying and fixing brass batten/ angle holder including connection etc. as required.
24
-
-
Supply and fixing LED commissioning of ceilingfan,including wiring the down goad of standard length(upto 30cm FRLS PVC insulatrd,copper coductor,single core cable and earthing etc.as required(Make : philips/Bajaj/Cromton).
12
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
8
-
-
Schedule 'A' Part-II (Addn/altrn of existing 18xS/JCOs accn in 03 Blocks,G+II(Bldg No P/2010/R-2/28A, B and P/2010/97)
-
-
-
Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead.
601.12
-
-
Grading roof for water proofing treatment with Cement mortar 1:4 (1cement : 4 coarse sand).
7.28
-
-
Providing and laying APP (Atactic Polypropylene Polymer) modified
prefabricated five layer 3 mm thick water proofing membrane, black
finished reinforced with non-woven polyester matt consisting of a
coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by
the same membrane manufacture of density at 25°C, 0.87-0.89 kg/
litre and viscocity 70-160 cps. Over the primer coat the layer of
membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick.
364.08
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.
236.18
-
-
Demolishing cement concrete manually/ by mechanical means
including disposal of material within 50 metres lead as per direction
of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
10.8
-
-
Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C., kitchen and the
like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed
with water proofing compound conforming to IS 2645 in
recommended proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse
sand) mixed with water proofing compound in recommended
proportion including rounding off junction of vertical and
horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot
at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints
of PVC sheet should be 100 mm wide and pasted to each
other with bitumen @ 1.7 kg/sqm).
48.6
-
-
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural
sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources).
8.78
-
-
Providing and laying 75 mm thick compacted bed of dry brick
aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineerin- charge.
27
-
-
52 mm thick cement concrete flooring with concrete hardener topping,
under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
27
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
236.18
-
-
M & L for 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand).
201.04
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer.
201.04
-
-
Distempering with 1st quality acrylic distemper (ready mixed) having
VOC content less than 50 gms/litre, of approved manufacturer, of
required shade and colour complete, as per manufacturer's specification.Two or more coats on new work.
153.04
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
48
-
-
Providing & fixing fly proof wire gauze to windows, clerestory windows &doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides
130.9
-
-
Providing and fixing factory made door frame (single rebate) made out ofsingle piece extruded solid PVC foam profile with homogenous fine
cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven selftapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
89.1
-
-
Providing and fixing factory made 30 mm thick door shutter made of
solid PVC foam profile. The styles & rails shall be of size 75 mm x 30
mm having wall thickness 5 mm. The styles, top & bottom rails shall
have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and railsshall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge.
28.35
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm.
36
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm.
36
-
-
Renewing glass panes, with putty and nails wherever necessary
including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm.
28.8
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal
ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter.
80
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming
to IS : 13592 Type A, including jointing with seal ring conforming to
IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°, 110 mm bend
16
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming
to IS : 13592 Type A, including jointing with seal ring conforming to
IS : 5382, leaving 10 mm gap for thermal expansion.Single tee with door.110x110x110 mm
10
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design
to unplasticised - PVC rain water pipes by means of 50x50x50 mm
hard wood plugs, screwed with M.S. screws of required length,
including cutting brick work and fixing in cement mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete. 75 mm.
33
-
-
Providing & Fixing Slotted cowl (terminal guard) 100 mm dia for vent pippes.
2
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work
in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,
with C.I. surface box 100mm top diameter, 160 mm bottom diameter
and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size ) , i/c necessary excavation, foundation concrete 1:5:10
(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size) and inside plastering with cement mortar 1:3 (1 cement : 3
coarse sand) 12 mm thick, finished with a floating coat of neat cement
complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
10
-
-
Providing and fixing P.V.C. low level flushing cistern with manually
controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White.
18
-
-
Providing and fixing brass bib cock of approved quality :15 mm nominal bore.
18
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931,15mm nominal bore.
90
-
-
Providing and fixing C.P. brass wall mixer with provision of overhead shower with 115mm long pipe with chrome finish(make: Hindware/Jaquar)
18
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter
18
-
-
Providing and fixing C.P brass hot and cold basin mixer tap with chorme finish(make: Hindware/Jaquar).
18
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
18
-
-
Providing and fixing PTMT soap Dish Holder having length of 138mm,
breadth 102mm, height of 75mm with concealed fitting arrangements,
weighing not less than 106 gms.
18
-
-
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto
1 metre long with S.S. triangular plate to Eureopean type W.C. of
quality and make as approved by Engineer - in - charge.
18
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
complete.
18
-
-
Providing and fixing solid plastic seat with lid for pedestal type W.C.
pan complete :White solid plastic seat with lid
18
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.Flexible pipe 32 mm dia.
18
-
-
Providing and fixing 600x120x5 mm glass shelf with edges round off,
supported on anodised aluminium angle frame with C.P. brass
brackets and guard rail complete fixed with 40 mm long screws, rawl
plugs etc., complete.
18
-
-
Distempering with 1st quality acrylic distember (Ready mix) having
VOC content less than 50 grams/ litre of approved brand and
manufacture to give an even shade : Old work (one or more coats)
2488.35
-
-
Removing dry or oil bound distemper, water proofing cement paint
and the like by scrapping, sand papering and preparing the surface
smooth including necessary repairs to scratches etc. complete.
3595.49
-
-
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade : One or more coats on old work.
208.86
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shadeOld work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.
1207.14
-
-
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Kiln seasoned and chemically treated hollock wood.
0.26
-
-
Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately).18 mm thick.
41.28
-
-
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with
necessary screws etc. complete.50x37x1.50 mm.
80
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm.
16
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm.
16
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :75mm.
32
-
-
Providing and laying 75 mm thick compacted bed of dry brick
aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineerin-
charge
24
-
-
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural
sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources).
1.8
-
-
Chequerred precast cement concrete tiles 22 mm thick in footpath &
courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Dark shade pigment using ordinary cement.
60
-
-
Schedule 'A' Part-II (Internal Electrification of existing 18xS/JCOs accn in 03 Blocks(Bldg No P/2010/R-2/28A, B and P/2010/97))
-
-
-
Supplying and fixing 5/6 amps switch piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
60
-
-
Supplying and fixing 3 pin 5/6 amps socket outlet piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
24
-
-
Supplying and fixing following piano type switch/ socket on the
existing switch box/ cover including connections etc. as required.6 pin 15/16 A socket outlet
6
-
-
Supplying and fixing following piano type switch/ socket on the
existing switch box/ cover including connections etc. as required.15/16 A switch
6
-
-
Supplying and fixing brass batten/ angle holder including connection etc. as required.
36
-
-
Supply and fixing LED commissioning of ceilingfan,including wiring the down goad of standard length(upto 30cm FRLS PVC insulatrd,copper coductor,single core cable and earthing etc.as required(Make : philips/Bajaj/Cromton).
36
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
8
-
-
Schedule 'A' Part-II (Addn/altrn of existing 08xS/Offrs accn in 03 Blocks, G+II (Bldg No P/2012/21C and P/2010/93 (A and B)
-
-
-
Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead.
527.85
-
-
Grading roof for water proofing treatment with Cement mortar 1:4 (1cement : 4 coarse sand).
10.56
-
-
Providing and laying APP (Atactic Polypropylene Polymer) modified
prefabricated five layer 3 mm thick water proofing membrane, black
finished reinforced with non-woven polyester matt consisting of a
coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by
the same membrane manufacture of density at 25°C, 0.87-0.89 kg/
litre and viscocity 70-160 cps. Over the primer coat the layer of
membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick.
527.85
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.
609.42
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete.
484.26
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
125.16
-
-
Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) decorative type, core of block board construction with
frame of 1st class hard wood and well matched teak 3 ply veneering
with vertical grains or cross bands and face veneers on both faces of
shutters.35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws.
12.8
-
-
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Kiln seasoned and chemically treated hollock wood.
0.45
-
-
Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately).18 mm thick.
106.8
-
-
Providing and fixing bright finished brass parliamentary hinges with
necessary screws etc. complete :100x125x27x5 mm
24
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :150x10mm.
96
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :200x10mm
32
-
-
Providing and fixing special quality bright finished brass cupboard or
ward robe locks with four levers of approved quality including necessary screws etc. complete.75mm
9
-
-
Providing and fixing bright finished brass handles with screws etc.
complete:75mm
18
-
-
Providing and fixing bright finished brass handles with screws etc.
complete:125mm
16
-
-
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws
etc. complete :300x16 mm.
8
-
-
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine
cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
39.6
-
-
Providing and fixing factory made 30 mm thick door shutter made of
solid PVC foam profile. The styles & rails shall be of size 75 mm x 30
mm having wall thickness 5 mm. The styles, top & bottom rails shall
have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge.Non decorative finish.
12.6
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10 mm.
16
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100mm.
16
-
-
Renewing glass panes, with putty and nails wherever necessary
including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).
3.2
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work
in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,
with C.I. surface box 100mm top diameter, 160 mm bottom diameter
and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size ) , i/c necessary excavation, foundation concrete 1:5:10
(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal
size) and inside plastering with cement mortar 1:3 (1 cement : 3
coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
3
-
-
Providing and fixing rimless single piece EWC with UF soft close slim seat cover,hinges,fixing accessories,accessries set and cistern fitting,size 385x720x715mm,S trap 300mm (Make: Jaquar/ Parryware/ Hindware).
4
-
-
Providing and fixing wall hung basin with full pedestal and fixing accessories of size 620x480x185mm (Make : Jaquar/ Parryware/ Hindware).
8
-
-
Providing and fixing central hole basin mixer with popup waste system with 450mm longbraided hoses (Make : Jaquar/Parryware/Hindware).
8
-
-
Providing and fixing wall mixer with provision for overhead shower with 115mm long bend pipe on upper side,connecting legs & wall flanges (Make : Jaquar/Parryware/Hindware).
8
-
-
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc.PN - 16 Pipe, 20mm OD (SDR-7.4)
20
-
-
Providing and fixing brass bib cock of approved quality :15 mm nominal bore.
8
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931,15mm nominal bore.
40
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter
8
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
8
-
-
Providing and fixing PTMT soap Dish Holder having length of 138mm,
breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
8
-
-
providing and fixing hand shower(Helth faucet) with 8mm dia 1.2m long flexible tube & wall hook(Make: Jaquar/Parryware/Hindware).
8
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
complete.
8
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe,32 mm dia.
8
-
-
Providing and fixing 600x120x5 mm glass shelf with edges round off,
supported on anodised aluminium angle frame with C.P. brass
brackets and guard rail complete fixed with 40 mm long screws, rawl
plugs etc., complete.
8
-
-
Providing and fixing free standing shower enclosure using temperred glass 8mm/10mm of size 1950x800mm(Make: Jaquar/ Parryware/ Hindware).
2
-
-
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).
0.9
-
-
Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
298.61
-
-
15 mm cement plaster finished with a floating coat of neat cement : 1:4 (1 cement : 4 fine sand).
196.61
-
-
Distempering with 1st quality acrylic distember (Ready mix) having
VOC content less than 50 grams/ litre of approved brand and
manufacture to give an even shade :Old work (one or more coats).
1835.06
-
-
Removing dry or oil bound distemper, water proofing cement paint
and the like by scrapping, sand papering and preparing the surface
smooth including necessary repairs to scratches etc. complete.
454.3
-
-
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :One or more coats on old work.
62.13
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shadeOld work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.
436.43
-
-
Chequerred precast cement concrete tiles 22 mm thick in footpath &
courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Dark shade pigment using ordinary cement.
105
-
-
Schedule 'A' Part-II (Internal Electrification of existing 08xS/Offrs accn in 03 Blocks, G+II(Bldg No P/2012/21C and P/2010/93 (A and B))
-
-
-
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.Group B
35
-
-
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.2 x 2.5 sq. mm
80
-
-
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.2x4 sqmm
48
-
-
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.5/6 amps switch.
45
-
-
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 A socket outlet.
10
-
-
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.6 pin 15/16 A socket outlet.
6
-
-
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.15/16 A switch.
6
-
-
Supplying and fixing brass batten/ angle holder including connection etc. as required.
13
-
-
S & F of LED tube light fittings 22 W complete with all accessories,including connections with 1.5 Sqmm FRLS PVC insulated,copper conductor,single core cable and earthing etc.as required(Make: philips/Bajaj/Crompton)
7
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
6
-
-
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
2
-
-
Supplying,installation of exhaust fan PVC body 300mm sweep in the existing opening,including making good the damage,connection,testing,commissioning tec.as required(Make : philips/Bajaj/Cromton).
2
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole.
12
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
1
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm).
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements