Urban Development Authority Tender

Civil works;LED Luminaire Surface Mounted, made with low copper content extruded aluminum housing, Electro statically applied polyester powder coat finish. The fixture should have stainless steel hardware and clear tempered glass. Lumen maintenance should be L80 B10 1,00,000 hrs or higher. IP66 min. with the impact resistance of IK09 min. The operating temperature range should be -5° C to 50° C. Fixtures should be available with various mounting options as per site requirements, Custom Color finish as per consultant request. Fixtures should have a dual chamber thermal design system that allows air to flow between the driver and LED board, maximizing the surface area, and increasing output and the driver should be replaceable. The Wattage of the fixture should be 25W runs on direct 230VAC/ DC 24 V. The fixture should have delivered a lumen output of 1200lm min. The fixture should be Additive (RGBW)RGB + white 3000K. The fixture should have the flexibility to integrate optics with different beam distributions within the same Electrical board of one fixture. The fixture should have a beam angle of 2.5°/ 5°/ 10°/20°/45°/ 60° / 15°x32°/10°x45°. Fixture Should be complaint to LM-80 and LM-79 IESNA: an approved method for the Electrical and Photometric Measurements of Solid- State Lighting Products LM-79 testing of the complete luminaire, having a warranty of 05 years make: Linea Light/lguzzini/WE-EF/Ligman/Griven/Tesio/Puk Lighting equivalent.

Civil works;Ground LED Luminaire of Pathway Mounted light, made with low copper content extruded aluminum housing, Electro statically applied polyester powder coat finish along with machined aluminum end caps, and a silicon gasket. The fixture should have stainless steel hardware and clear tempered glass. Lumen maintenance should be L80 B10 1,00,000 hrs or higher. IP66 min. with the impact resistance of IK09 min. The operating temperature range should be -5° C to 50° C. Fixtures should be available with various mounting options as per site requirements, Custom Color finish as per consultant request. Fixtures should have a dual chamber thermal design system that allows air to flow between the driver and LED board, maximizing the surface area, and increasing output and the driver should be replaceable. The Wattage of the fixture should be 20W runs on direct 230VAC. The fixture should have delivered a lumen output of 2100lm min. The fixture should be white 3000K. Fixture Should be complaint to LM-80 and LM-79 IESNA: an approved method for the Electrical and Photometric Measurements of Solid- State Lighting Products LM-79 testing of the complete luminaire, having a warranty of 05 years make: Linea Light/lguzzini/WE-EF/Ligman/Griven/Tesio/Puk Lighting equivalent.

Civil works;24V led driver for low voltage fixture in metal casing IP67 Make: Mean well/TESIO/ LINEA LIGHT/EQUIVALENT.