Tribal Welfare Engineering Department Tender

BILL OF QUANTITIES;Supply and transportation of 30W LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Driver surge protection more than 4KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete

BILL OF QUANTITIES;Supply, Transportation of energy efficient fan, 1200mm sweep, alluminium body, consuming 28W, BEE 5 Star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation : B, 3 Nos, blades, 30 cm long down rod, 2 Nos canopies, shackle kit, safety rope, copper winding, Power Factory greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM (tolerance as per IS:374-2019(, THD less than 10% with remote or compatibl to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut b olts, washers temperature rise = 75 degree C (max), insulation resistance moe than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC Supply, earthing etc., including all standard accessories etc., complete for finished item of work Makes : Atomberg (Efficio)/Havells Orient

BILL OF QUANTITIES;Supply and fixing of batten holder / slanting holder Anchor / Gold medal olive / Million zoom make with ISI mark in lieu of ceiling rose of light point with 40W bulb all connections including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

BILL OF QUANTITIES;Supply and fixing of 6A 3/2 pin flush type socket with 6A switch control of Anchor / Gold medal olive / Million zoom make with ISI mark on a common switch board with earth continuity including wire leads, earth connections including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work

BILL OF QUANTITIES;Supply and run of 2 of 36/0.3mm (2.5Sq.mm) Fire Retardant P.V.C. insulated flexible copper cable of GM/L&T / RPG/ Havells / V-Guard /Power Flex/ Polycab/ Gold Medal/ Standard / Milion/ Vimal/ Suncab/ Paragaon /FortuneArt in existing metallic / non metallic pipe with run of 1 of 14/0.3mm (1Sq.mm) Finolex / RR kabel/ Fortune Art EBXL Fire Retardant P.V.C. insulated flexible copper cable including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

BILL OF QUANTITIES;Supplying and wiring with 2 runs of 22/0.3m (1.50 Sq.mm) FRLS / HFFR P.V.C. insulated ISI Copper Cable GM/L&T/RPG/Havells/V-Guard/Power Flex/Polycab/Gold Medal/ Standard /Milion/ Vimal/ Suncab/ Paragaon/FortuneArt make in the existing metallic / non-metallic conduct pipe with 6A 1 Way flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Buildings

BILL OF QUANTITIES;Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126) TATA, SAIL, VSP, JSW, SHYAM STEEL, GOEL TMT, V-XEGA, JINDAL PANTHER and BALAJI SHAKTI

BILL OF QUANTITIES;Painting to New Iron work with two coats of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ liter first quality all shades over red oxide primer Grade-I making three (3) coats in all to given and even shade after thourughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors

BILL OF QUANTITIES;Painting to New wood work with two coats of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ liter first quality all shades to give an even shade over base coatof wood Primer finishing with putty for wood work after thouroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., complete for finished item of work.(3 coats) (APSS No. 1201 & 1212).in All Floors

BILL OF QUANTITIES;Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)

BILL OF QUANTITIES;Painting to new internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior Grade-I of approved brand, makind three (3) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911)

BILL OF QUANTITIES;Supply and fixing of Galvanised steel barbed wire weight 16.4 Kgs per 100 mts straining & Fixing to any type of Type II wire, Including securing with and provision of galvanised mils steel wire, stapples etc., complete for finished item of work.

BILL OF QUANTITIES;Supply and fixing of Y - angular post of size 50x50x5mm thick MS angle for fixing of Fencing including cutting, hoisting, fixing in positiion, applying a red oxide primer coat of applied preimer etc., complete for finised item of work.

BILL OF QUANTITIES;Supply and fixing of M.S.Grill of size with outer angular frame of rolled steel equal angle of ISA 4040 of size 40mm x 40mm x 4mm welded with safety bars of 10mm square rods at 100mm centre to centre horizontally and verticlally including red oxide primer of grade-I quality, sales and other taxes, cost and conveyance of all materials to site, all labour charges and fixing in position etc., complete for finished item of work.

BILL OF QUANTITIES;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ? (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin)of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

BILL OF QUANTITIES;Supply and fixing of Door size 1.22 x 2.13 M Double Leaf with Door Frame of Non teak wood Section 100 mm x 75 mm along with 35 mm thick conforming to IS:2202 with "E" Type Teak Wood Beeding Alround the Flush Shutter including fixtures such as Hardware fixtures ie., MSPC Butt Hinges 150mm Long 6 nos, MSPC Handles 125 mm Long 2 Nos, MSPC Tower Bolt 150mm long 2 Nos, MSPC Aldrop 250 mm long 1 no, Including Labour charges for making of door, fixing of fixtures etc., and cost and conveyance of all materials to site, taxes extra for finished item of work.

BILL OF QUANTITIES;Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand/rock sand (50:50), water etc., to site, , sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., for Even Surfaces of brick wall complete for finished item of work. (APSS 901,903 & 904) for Ground Floor

BILL OF QUANTITIES;Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Superstructure Walls. for Ground Floor

BILL OF QUANTITIES;Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand/rock sand (50:50)) coarse aggregate, water etc., to site and , sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete for Plinth Beams.